T58WF2103R150Mbps Wireless-N USB Adapter

WF-2103 Quick Installation Guide netis 150M Wireless-N USB Adapter V1.1 2010-10-13 150M Wireless-N USB Adapter Quick Installation Guide - 1 - 1. Check Your Package Contents The following items should be found in your package: ¾ 150M Wireless-N USB Adapter ¾ Quick Installation Guide ¾ CD-ROM Make sure that the package contains above items. If any of the above items is missing or damaged, please contact the store you bought this product from. 2. Before Your Begin Minimum Requirements: ¾ Available USB 1.1 or USB 2.0 slot ¾ 300 MHz processor and 32 MB of memory ¾ CD-ROM drive ¾ An 802.11b/g/n access point (for Infrastructure Mode) or another 802.11b/g/n wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.) ¾ Microsoft® Windows® 7, Vista™, XP, 2000 SP4 3. Insert the CD Turn on the computer and insert the included CD in the CD-ROM drive. The install screen will appear. If not, click the Start button and choose Run and enter D:\CDView.exe (if ‘D’ is your CD-ROM drive) Select ‘Install Driver’ and follow the software instructions. 150M Wireless-N USB Adapter Quick Installation Guide - 2 - Figure 3-1 The following is the step-by-step instructions in Windows XP. The steps and screens are similar for the other Windows operating systems ¾ Select language and then click Next 150M Wireless-N USB Adapter Quick Installation Guide - 3 - Figure 3-2 ¾ Click Next Figure 3-3 ¾ Select the setup type that best suits your needs and then click ‘Next’. The default ‘Install 150M Wireless-N USB Adapter Quick Installation Guide - 4 - Both Driver and Utility’ is recommended, but you can also select ‘Install Driver Only’ if you don’t want to install utility Figure 3-4 ¾ Follow the InstallShield Wizard steps, and click Finish when done. 150M Wireless-N USB Adapter Quick Installation Guide - 5 - Figure 3-5 4. Insert the 150M Wireless-N USB Adapter The description of the indicator is as follows: ¾ Lnk/Act flash (green): data transmitting ¾ Lnk/Act on for 3seconds (green): WPS is successfully connected In order to use the utility immediately, you’d better restart your computer. When the computer is totally start, hold the adapter and insert it into a USB slot, the driver will be installed automatically. 5. Connecting To a Wireless Network Use the Wireless LAN Utility to check the link information, search for available wireless networks, or create profiles that hold different configuration settings. You can double-click the icon on your desktop to run it. Another way to start the Configuration Utility is to click Start> All Programs> netis 11n USB Wireless LAN Utility> netis 11n USB Wireless LAN Utility. 150M Wireless-N USB Adapter Quick Installation Guide - 6 - Figure 5-1 ¾ Double click the icon on the desk-top Figure 5-2 You can use the following methods to connect to a wireless network. Method 1: ¾ Click on the Available Network tab and available wireless networks will be displayed. You can then double click on the network that you wish to connect to. 150M Wireless-N USB Adapter Quick Installation Guide - 7 - Figure 5-3 ¾ If the network you are connecting to is encrypted, you will need to enter and confirm the network key/password, then click OK. 150M Wireless-N USB Adapter Quick Installation Guide - 8 - Figure 5-4 Method 2: WPS (Wi-Fi Protected Setup) Note: You can use method 2 only if your router also has WPS functionality. A: Button ¾ Push and hold WPS button on back of Router until WPS LED flashes (or as indicated according to manufacturer) ¾ Push WPS button on wireless network adapter and hold for about 3-5 seconds ¾ A safe connection will be established automatically in a moment ¾ The reverse – pushing and holding WPS button on adapter briefly, then pushing and holding WPS button on router briefly – may also be utilized B: PIN ¾ Select the Wi-Fi Protected Setup tab in the utility ¾ Choose to enter the WPS PIN of the router by ticking the Input PIN from AP box, provide router WPS PIN, and click on PIN Input Config. This PIN is often printed on a label on the router. If it is not found on the router, or has possibly been changed, you may need to access your router interface to find this PIN. ¾ Alternatively, you may choose to utilize a WPS PIN provided by this wireless adapter, click on PIN Input Config, and enter PIN in your router's interface. 150M Wireless-N USB Adapter Quick Installation Guide - 9 - FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Caut…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1009C190 Page 2 of 7 1009C190 1009C190 Neutron Engineering Inc. Project No.: 1009C190 Page 2 of 7 1009C190 1009C190 Neutron Engineering Inc. Project No.: 1009C190 Page 3 of 7 1009C190 1009C190 Neutron Engineering Inc. Project No.: 1009C190 Page 3 of 7 1009C190 1009C190

Neutron Engineering Inc. Project No.: 1009C190 Page 4 of 7 1009C190 Neutron Engineering Inc. Project No.: 1009C190 Page 5 of 7 1009C190 1009C190 Neutron Engineering Inc. Project No.: 1009C190 Page 5 of 7 1009C190 1009C190 Neutron Engineering Inc. Project No.: 1009C190 Page 6 of 7 1009C190 1009C190 Neutron Engineering Inc. Project No.: 1009C190 Page 6 of 7 1009C190 1009C190 Neutron Engineering Inc. Project No.: 1009C190 Page 7 of 7 1009C190

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 2 of 123 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 3 of 123 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS (RADIATED MODE) 13 3.6 DESCRIPTION OF SUPPORT UNITS (CONDUCTED MODE) 14 4 . EMC EMISSION TEST 15 4.1 CONDUCTED EMISSION MEASUREMENT 15 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 15 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 15 4.1.3 TEST PROCEDURE 16 4.1.4 DEVIATION FROM TEST STANDARD 16 4.1.5 TEST SETUP 16 4.1.6 EUT OPERATING CONDITIONS 16 4.1.7 TEST RESULTS 17 4.2 RADIATED EMISSION MEASUREMENT 19 4.2.1 RADIATED EMISSION LIMITS 19 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 20 4.2.3 TEST PROCEDURE 21 4.2.4 DEVIATION FROM TEST STANDARD 21 4.2.5 TEST SETUP 22 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 23 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 25 5 . BANDWIDTH TEST 73 5.1 APPLIED PROCEDURES / LIMIT 73 5.1.1 MEASUREMENT INSTRUMENTS LIST 73 5.1.2 TEST PROCEDURE 73 5.1.3 DEVIATION FROM STANDARD 73 5.1.4 TEST SETUP 74 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 4 of 123 Table of Contents Page 5.1.5 EUT OPERATION CONDITIONS 74 5.1.6 TEST RESULTS 75 6 . MAXIMUM OUTPUT POWER TEST 83 6.1 APPLIED PROCEDURES / LIMIT 83 6.1.1 MEASUREMENT INSTRUMENTS LIST 83 6.1.2 TEST PROCEDURE 83 6.1.3 DEVIATION FROM STANDARD 83 6.1.4 TEST SETUP 83 6.1.5 EUT OPERATION CONDITIONS 83 6.1.6 TEST RESULTS 84 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 92 7.1 APPLIED PROCEDURES / LIMIT 92 7.1.1 MEASUREMENT INSTRUMENTS LIST 92 7.1.2 TEST PROCEDURE 92 7.1.3 DEVIATION FROM STANDARD 92 7.1.4 TEST SETUP 92 7.1.5 EUT OPERATION CONDITIONS 92 7.1.6 TEST RESULTS 93 8 . POWER SPECTRAL DENSITY TEST 113 8.1 APPLIED PROCEDURES / LIMIT 113 8.1.1 MEASUREMENT INSTRUMENTS LIST 113 8.1.2 TEST PROCEDURE 113 8.1.3 DEVIATION FROM STANDARD 113 8.1.4 TEST SETUP 113 8.1.5 EUT OPERATION CONDITIONS 113 8.1.6 TEST RESULTS 114 9 . EUT TEST PHOTO 122 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 5 of 123 1. CERTIFICATION E q u i p m e n t : 150Mbps Wireless-N USB Adapter Brand Name : netis Model Name : WF-2103 A p p l i c a n t : NETIS SYSTEMS CO., LTD. Factory : Dongguan City Netcore Network Technology Co.,Ltd. Address : No.10-1,Sankeng Road,Qinghutou,Tangxia Town,Dongguan City Date of Test : Sep. 28, 2010 ~ Oct. 10, 2010 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1009C190) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 6 of 123 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(d) Antenna conducted Spurious EmissionPASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(b)(3) Peak Output Power PASS 15.209/15.205 Radiated Spurious Emission PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 7 of 123 2.1 TEST FACILITY The test facilities used to collect the test data in this report is CB03/DG-C03 at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China.523792 Neutron's test firm number is 319330 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 A. Conducted Measurement : Test Site Metho…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 116 of 117 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 116 of 117 9. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 117 of 117 Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1009C190 Page 117 of 117 Radiated Measurement Photos