TCJ-M4DBDA7MARK-IV Digital Narrowband (Class-A) Signal Booster

MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 USER’S MANUAL REVISION 0 SUBMITTED BY: CANAM TECHNOLOGY, INC. August, 2012 CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 USER’S MANUAL Page 2 of 11 Rev0 August/2012 TABLE OF CONTENTS Section A. INTRODUCTION ..................................................................................... 3 Section B. SYSTEM DESCRIPTION ........................................................................... 5 Section C. PHYSICAL OVERWIEW .......................................................................... 6 Section D. START - UP .............................................................................................. 8 D.1 ACCESSING D.U.T. WEB SERVER ................................................................... 8 D.1.1 Connect D.U.T to P.C computer using a crossover cable ................... 8 D.1.2 Connect D.U.T to local area network ..................................................... 9 D.2 USING AND SETTING UP D.U.T ...................................................................... 10 Section E. RF CONNECTIONS .............................................................................. 11 CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 USER’S MANUAL Page 3 of 11 Rev0 August/2012 Section A. INTRODUCTION The MARK-IVD 700MHZ Narrowband Signal Booster (M4DBDA7) is a Class B Narrowband Signal Booster to operate within range 763-775 MHz (DL path), 793-805 MHz (UL path) for Land Mobile radio FCC Part 90. This document is the M4DBDA7 User’s Maintenance Manual, intended for the Radio Technical Personnel. This manual is intended to be used with the M4DBDA7 Equipment only. It is not to be used with any other equipment unless it is authorized by Canam Technology, Inc. Canam Technology, Inc provide this document “as is” without any warranty of any kind. Canam Technology may make changes to the equipment, software or specifications in this document at any time without notice to the user. These changes will be notified to the party responsible for FCC compliance and they will be incorporated in future releases of this document. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment” This document may contain typographical errors and technical inaccuracies. Canam Technology will not accept any liability from the use and misuse of this manual, the information contained within, or the consequences of any actions resulting from the use of this information. CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 USER’S MANUAL Page 4 of 11 Rev0 August/2012 Signal boosters such as the M4DBDA7 generate radio signals and, therefore, electromagnetic fields. The technical personnel should have a complete understanding of FCC CFR Title 47 sections 1.1307 and 1.1310. Recommendations are included in this Manual, but they do not substitute the FCC guidelines. M4DBDA7 Key Features: Narrowband Class B Signal Booster, per FCC Part 90. Maximum Output Power at the antenna port +37 dBm per carrier. AGC circuit provides a constant output power, regardless of the input power. This device may require the use of antennas for proper functioning, depending on the application. The installation of the antennas should be performed by qualified technical personnel. All antennas should be fixed mounted and physically secured to one location The people must be away from the antennas at least 1.0 meters to comply with the RF Human Maximum Permissible Exposure limits, as long as the antenna system gain is lower than 11.3 dBi. If greater gain is used the separation should be increased, please refer to the FCC Rules. If service should be performed on the antenna, please shut down the transmitter or lower its power in order to comply with the maximum permissible exposure. CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 USER’S MANUAL Page 5 of 11 Rev0 August/2012 Section B. SYSTEM DESCRIPTION This system (D.U.T.) is an 700MHz Signal Booster to operate within range 763- 775 MHz (DL path), 793-805 MHz (UL path) for Land Mobile radio FCC Part 90. The system features eight or more programmable frequency narrowband filters. The desired operation frequencies must be configured using built-in Web Server. Programmable Individual Rx Threshold level (Squelch) per filter allows transmission if the probe signal is greater than configured Squelch. Individual Automatic Gain Control (AGC) per filter delivers constant output power level per channel (+/- 1 dB) regardless of their input level variations. The maximum output level per filter can be changed with option “Maximum Desired Output Level per filter” in Main Settings page from Web Server The built-in Web Server provides a Graphical User Interface (GUI) to ease in remote monitoring & control. Access is obtained via a PC’s Web Browser and a TCP/IP connection to the Unit. The system can be connected directly to a PC computer or can be plugged into the local area network. Some pages shown by the Web Server are the following: “Main Status”: depicts status alarm indicators and meters. “Main Settings”: is used to configure system-level macro settings. “Filter Settings” contains the settings that can be configured for each filter window. Never operate the system without adequate Load/Termination on the Donor/Base and Service/Side T/R port. The 700 MHz Signal Booster will amplify until 120dB gain any input stimulus greater than Rx Threshold level (Squelch). The Web Server allows to Mute/Un-mute Power Amplifiers in “Main Settings” page. Make sure the power amplifiers are un-muted before start with the test. CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 USER’S MANUAL Page 6 of 11 Rev0 August/2012 Section C. PHYSICAL OVERWIEW Figure 1 shows the visual status that the D.U.T. front panel. Table 1 contains a brief…

Text truncated - open the document above for the full version.

5318 East 2nd Street, Suite 700 Long Beach, CA 90803 Ph: (562)856-0178, Fax: (562)856-0188 Web Site www.canam-technology.com E-mail: [email protected] FCC Confidential Authorization July 23 th , 2012 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of TCJ- M4DBDA7. In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Canam Technology Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram. Circuit Description. Schematic Diagrams. Parts List (Bill of Materials). In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Canam Technology Inc. hereby requests short-term confidential treatment of information accompanying this application as outlined below: User’s Manual. Operation and Maintenance (O&M) Manual. Internal photos. The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Victor Bermudez Vice-President Canam Technology, Inc. 5318 E 2nd Street #700 Long Beach, CA 90803 USA [email protected] www.canam-technology.com

5318 East 2nd Street, Suite 700 Long Beach, CA 90803 Ph: (562)856-0178, Fax: (562)856-0188 Web Site www.canam-technology.com E-mail: [email protected] FCC Authorization July 23rd, 2012 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Canam Technology Inc., the undersigned, Hereby authorizes Bay Area Compliance Laboratory Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, Victor Bermudez Vice-President Canam Technology, Inc. 5318 E 2nd Street #700 Long Beach, CA 90803 USA [email protected] www.canam-technology.com

Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 55 of 62 FCC Part 90 Test Report 11 Exhibit C - EUT Photographs 11.1 EUT Front View 11.2 EUT Rear View Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 56 of 62 FCC Part 90 Test Report 11.3 EUT Top View 11.4 EUT Bottom View Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 57 of 62 FCC Part 90 Test Report 11.5 EUT Side View 1 11.6 EUT Side View 2

MARK-IVD 700MHz NARROWBAND SIGNAL BOOSTER MODEL: M4DBDA7 FCC ID: TCJ-M4DBDA7 REVISION 0 SUBMITTED BY: CANAM TECHNOLOGY, INC. August, 2012 CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 Page 2 of 2 Rev0 August/2012 I I . . L L a a b b e e l l P P i i c c t t u u r r e e s s Figure 1 – Labels Location Rear Panel details Figure 2 – FC C ID Label design example NOTE: This is a FCC Label sample. FCC Label Location Model and Serial Number Label Location

Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 58 of 62 FCC Part 90 Test Report 11.7 EUT Open View 11.8 AIC Module Front View 11.9 AIC Module Rear View Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 59 of 62 FCC Part 90 Test Report 11.10 AIC Module PCB View 11.11 DSP Module Rear View 11.12 DSP Module Front View Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 60 of 62 FCC Part 90 Test Report 11.13 DSP Module PCB View 11.14 ECM Front View Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 61 of 62 FCC Part 90 Test Report 11.15 ECM Rear View 11.16 ECM PCB Top View Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 62 of 62 FCC Part 90 Test Report 11.17 ECM PCB Bottom View --- END OF REPORT ---

MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 OPERATIONS & MAINTENANCE (O&M) MANUAL REVISION 0 SUBMITTED BY: CANAM TECHNOLOGY, INC. August, 2012 CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 O&M MANUAL Page 2 of 44 Rev0 August/2012 TABLE OF CONTENTS Section A. INTRODUCTION ..................................................................................... 4 Section B. GLOSSARY ............................................................................................. 6 Section C. SAFETY PRECAUTIONS .......................................................................... 7 C.1 EQUIPMENT HANDLING AND INSTALLATION ............................................... 7 C.2 POWER SUPPLIES ............................................................................................. 7 C.3 MCPA MODULES ............................................................................................ 7 C.4 RF EXPOSURE ................................................................................................... 7 C.5 MOVING PARTS............................................................................................... 8 Section D. THEORY OF OPERATION ...................................................................... 9 D.1 DESCRIPTION ................................................................................................... 9 D.2 FUNCTIONAL BLOCK DIAGRAM ................................................................. 10 D.3 FEATURES ........................................................................................................ 11 D.4 SPECIFICATIONS ............................................................................................ 12 D.5 FRONT AND REAR PANEL PORTS AND INTERFACES.................................. 15 D.6 LCD-DISPLAY & KEYPAD ASSEMBLY ........................................................... 17 Section E. INITIAL CONFIGURATION ................................................................... 21 E.1 GENERAL GUIDELINES REGARDING RF CONNECTIONS & OPERATIONS WITH TEST INSTRUMENTS ......................................................................................... 22 E.2 ANTENNA INSTALLATION .............................................................................. 23 Section F. WEB-SERVER GRAPHICAL USER INTERFACE .................................... 24 F.1 FIRST-TIME START CONFIGURATION ............................................................ 24 F.1.1 CONNECTING SYSTEM DIRECTLY TO PC COMPUTER ........................... 24 F.1.2 CONNECTING SYSTEM TO LOCAL AREA NETWORK ............................. 29 F.2 WEB SERVER OPERATIONS ........................................................................... 31 F.2.1 MAIN STATUS PAGE ................................................................................... 32 F.2.2 FILTER STATUS PAGE .................................................................................. 37 F.2.3 MAIN SETTINGS PAGE ............................................................................... 38 F.2.4 FILTER SETTINGS PAGE ............................................................................... 42 CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 O&M MANUAL Page 3 of 44 Rev0 August/2012 TABLE OF FIGURES Figure 1 – M4DBDA7 General Block Diagram .................................................................................. 10 Figure 2 - Front Panel details ............................................................................................................... 15 Figure 3 - Rear Panel details. ............................................................................................................... 16 Figure 4 – LCD and Keypad Interface ............................................................................................... 17 Figure 5 – System connected directly to PC computer. ................................................................. 24 Figure 6 – Menu options for Local Area Connection. ..................................................................... 25 Figure 7 – Local Area Connection Properties. .................................................................................. 26 Figure 8 – Internet Protocol (TCP/IP) Properties. ............................................................................... 26 Figure 9 – Local Area Connection Status. ......................................................................................... 27 Figure 10 – Local Area Connection Properties. ................................................................................ 28 Figure 11 – System connected into local area network. ................................................................ 29 Figure 12 – Main Status page .............................................................................................................. 32 Figure 13 – Filter Status page ............................................................................................................... 37 Figure 14 – Main Settings page ........................................................................................................... 38 Figure 15 – Value is not into valid range error message ................................................................. 41 Figure 16 – Filter Settings page (1/2) .................................................................................................. 42 Figure 17 – Filter Settings page (2/2) .................................................................................................. 43 CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 O&M MANUAL Page 4 of 44 Rev0 August/2012 Section A. INTRODUCTION The MARK-IVD 700MHZ Narrowband Signal Booster (M4DBDA7) is a Class B Narrowband Signal Booster to operate within range 763-775 MHz (DL path), 793-805 MHz (UL path) for Land Mobile radio FCC Part 90. This document is the M4DBDA7 Operations and Mainte…

Text truncated - open the document above for the full version.

CANAM TECHNOLOGY, INC. (CTI) MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 TUNE UP MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 This system does not require tune up procedure.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.3) FCC PART 90 TEST AND MEASUREMENT REPORT For Canam Technology, Inc. 5318 East 2 nd St., #700, Long Beach, CA 90803, USA FCC ID: TCJ-M4DBDA7 Report Type: Original Report Product Type: Bi-Directional Amplifier Prepared By Lionel Lara Report Number R1207231-90 Report Date 2012-08-16 Reviewed By Victor Zhang RF/EMC Lead Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: (408) 732-9162 Fax: (408) 732 9164 Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 2 of 62 FCC Part 90 Test Report TABLE OF CONTENTS 1. General Information.............................................................................................................................................5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)........................................................................5 1.2 MECHANICAL DESCRIPTION...........................................................................................................................5 1.3 OBJECTIVE......................................................................................................................................................5 1.4 RELATED SUBMITTAL(S)/GRANT(S) ...............................................................................................................5 1.5 TEST METHODOLOGY.....................................................................................................................................6 1.6 MEASUREMENT UNCERTAINTY......................................................................................................................6 1.7 TEST FACILITY...............................................................................................................................................6 2 System Test Configuration...................................................................................................................................7 2.1 JUSTIFICATION................................................................................................................................................7 2.2 EUT EXERCISE SOFTWARE.............................................................................................................................7 2.3 EQUIPMENT MODIFICATIONS..........................................................................................................................7 2.4 INTERNAL CONFIGURATION............................................................................................................................7 2.5 LOCAL SUPPORT EQUIPMENT.........................................................................................................................7 2.6 LOCAL SUPPORT EQUIPMENT POWER SUPPLY AND LINE FILTERS..................................................................8 2.7 EXTERNAL I/O CABLING LIST AND DETAILS..................................................................................................8 3 Summary of Test Results......................................................................................................................................9 4 FCC §2.1091 - RF Exposure Information.........................................................................................................10 4.1 APPLICABLE STANDARDS.............................................................................................................................10 4.2 MPE PREDICTION.........................................................................................................................................10 4.3 CONCLUSION................................................................................................................................................11 5 FCC §2.1046 & §90.205 – RF Output Power....................................................................................................12 5.1 APPLICABLE STANDARD...............................................................................................................................12 5.2 TEST PROCEDURE.........................................................................................................................................12 5.3 TEST EQUIPMENT LIST AND DETAILS...........................................................................................................12 5.4 TEST ENVIRONMENTAL CONDITIONS............................................................................................................12 5.5 TEST RESULTS..............................................................................................................................................13 6 FCC §2.1049 & §90.543 – Occupied Bandwidth & Emission Mask ...............................................................15 6.1 APPLICABLE STANDARD...............................................................................................................................15 6.2 TEST PROCEDURE.........................................................................................................................................15 6.3 TEST EQUIPMENT LIST AND DETAILS...........................................................................................................15 6.4 TEST ENVIRONMENTAL CONDITIONS............................................................................................................16 6.5 TEST RESULTS....................................................................................................…

Text truncated - open the document above for the full version.

Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 53 of 62 FCC Part 90 Test Report 10 Exhibit B - Test Setup Photographs 10.1 Radiated Emission below 1 GHz– Front View 10.2 Radiated Emission below 1 GHz– Rear View Canam Technology, Inc. FCC ID: TCJ-M4DBDA7 Report Number: R1207231-90 Page 54 of 62 FCC Part 90 Test Report 10.3 Radiated Emission above 1 GHz– Front View 10.4 Radiated Emission above 1 GHz– Rear View