TDU-SB01BLUETOOTH ACCESSORY

MOVON CORPORATION 6Fl., Hyunjuk Bldg., 140-28, Samseong-Dong, Gangnam-Gu, Seoul, Korea Date: July 3, 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Timco Engineering, Inc. Certification Division 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA To whom it may concern: I, the undersigned, hereby authorize Technical Manager Issac Jin of MOVON CORPORATION and hereafter referred to as MOVON CORPORATION , to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these m atters. Any and all acts carried out by Technical Manager Issac Jin of MOVON CORPORATION on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing MOVON CORPORATION as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; MOVON CORPORATION 6Fl., Hyunjuk Bldg., 140-28, Samseong-Dong, Gangnam-Gu, Seoul, Korea e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Dominic So / Manager MOVON CORPORATION REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

MOVON CORPORATION 6Fl., Hyunjuk Bldg., 140-28, Samseong-Dong, Gangnam-Gu, Seoul, Korea Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: TDU-SB01 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operation Description Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely Yours, Dominic So / Manager MOVON CORPORATION

External photos of EUT Front view of EUT Rear view of EUT Top view of EUT Bottom view of EUT Side view of EUT

Internal photos of EUT Antenna view of EUT Chip Antenna Top view of Main PCB Bottom view of Main PCB

AHSBTM0602-B00 VER 1.0(120605) I [LEAD FREE] MSL Level 1 Approval Sheet 2012. 06. 05 MicroRF Co., Ltd. TEL. 82-2-6406-5590 FAX. 82-2-6406-5591 Product High Dielectric Chip Antenna Customer MOVON Model Smart Key Customer Code Supplier MicroRF Co., LTD. Supplier Code AHSBTM0602-B00 Customer Designed by Checked by Approved by MicroRF Designed by By checked By approved R&D QC R&D YoungKwan,Jang Manseok,Kang Seungyun,Kim AHSBTM0602-B00 VER 1.0(120605) II [LEAD FREE] MSL Level 1 SPECIFICATION Model : Smart_key High Dielectric Chip ANTENNA Designed by Approved by Approved by R&D QC R&D Youngkwan.Jang Manseok,Kang Seungyun,Kim 120605 120605 120605 2012. 06. 05 MicroRF Co., Ltd. TEL. 82-02-6406-5590 FAX. 82-02-6406-5591 AHSBTM0602-B00 VER 1.0(120605) III Contents 1. Revision History .............................................................................................................................. 1 2. Feature And Applications ........................................................................................................... 2 3. CODE NO. .......................................................................................................................................... 2 4. Electrical Specifications.............................................................................................................. 2 5. Mechanical Dimensions .............................................................................................................. 6 6. Measurement Method and Conditions ................................................................................. 6 7. Environmental Specifications ................................................................................................... 7 8. Environmental Tests ...................................................................................................................... 8 9. Recommended Soldering Patterns ........................................................................................ 9 10. Packaging .................................................................................................................................... 1 0 11. Usage And Cautions .............................................................................................................. 1 0 12 .RoHS Data ................................................................................................................................... 1 1 AHSBTM0602-B00 VER 1.0(120605) １ 1. Revision History Product High Dielectric Chip Antenna Model Smart Key CODE NO.AHSBTM0602-B00 Rev No. Date Name Page Item Revision Issue 1.0 120605 YK.Jang Issued AHSBTM0602-B00 VER 1.0(120605) ２ 2. Feature And Applications This chip antenna is applied to 2.4 GHz band applications. i.e wireless LAN, Bluetooth, zigbee, etc 3. CODE NO. CODE NO. : AHSBTM0602-B00 CUSTOMER PART NO. : 4. Electrical Specifications * All items are measured in room temperature (25°C). * All items are measured at customer set condition. No. ITEM Specification Typical Data 1 Frequency 2400 MHz 2500 MHz 2400 MHz 2500 MHz 2 VSWR 3.0 max 3.0 max 2.0 max 2.0 max 3 Total Gain(Peak) -0.5 dBi min -4.0 dBi min 1.0 dBi min -2.5 dBi min 4 Impedance 50 Ω 50 Ω 5 Polarization Linear Linear AHSBTM0602-B00 VER 1.0(120605) ３ 4-1 VSWR & Smith Chart data (S11 of SET condition) AHSBTM0602-B00 VER 1.0(120605) ４ 4-2 Radiation Patterns Peak Value(Beam Peak :dB) Azimuth Plane Elevation 1 Elevation 2 2.4GHz 0.314 -0.107 1.237 2.45 GHz 1.170 0.426 1.926 2.5 GHz -2.208 -3.165 -2.626 (a) Azimuth Plane (XY) – Horizontal Polarization AHSBTM0602-B00 VER 1.0(120605) ５ (b) Elevation1 Plane (YZ) – Vertical Polarization (c) Elevation2 Plane (XZ) – Vertical Polarization AHSBTM0602-B00 VER 1.0(120605) ６ 5. Mechanical Dimensions 6. Measurement Method and Conditions The measurement of antenna performance is measurement of gain, radiation pattern using ORBIT/FR apparatus in Anechoic chamber and measurement of VSWR using Network analyzer. 6-1. The measurement of Frequency and VSWR NETWORK ANALYZER [8753] <Measurement Method> 1) As seen the above, network analyzer is set up for S11 measurement. 2) The measurement frequency range is to set up from 2 GHz to 3 GHz. 3) Perform S11 one port full calibration. 4) Measure the VSRW of one points of Bluetooth frequency range such as 2400 MHz, 2450 MHz and 2500 MHz AHSBTM0602-B00 VER 1.0(120605) ７ 6-2. The measurement of Gain and Radiation Patterns NETWORK ANALYZER [8753] <Measurement Method> 1) As seen the above, network analyzer is to set up in Anechoic chamber. 2) As seen the beneath, for the measurement planes as Azimuth, Elevation1, and Elevation2, measure Gain data of vertical polarization and horizontal polarization for each plane. -90° 90° 180° 0° 90° -90° 180° 0° -90° 90° 180° 0° (AZIMUTH PLANE) (ELEVATION1 PLANE) (ELEVATION2 PLANE) 7. Environmental Specifications No. Items Specifications 1 Material Pb-free system 2 Operating Temperature Range -30 ~ +85 °C 3 Operating Humidity Range 45 ~ 85 % RH AHSBTM0602-B00 VER 1.0(120605) ８ 8. Environmental Tests No. Item Test Conditions 1 High Temperature Storage Leave for 72±2 hours in a test bath retaining 85±2°C. After then, leave on the test conditions for 1.5 hours. 2 Low Temperature Storage Leave for 72±2 hours in a test bath retaining -30±2°C. After then, leave on the test condition for 1.5 hours. 3 Static Humidity Leave for 24±2 hours in a test bath retaining 90~95% RH / 50±3°C. After then, leave in the test condition for 1.5 hours. 4 Thermal Shock Cool from 25°C down to -30±2°C and leave for 30 minutes. After that, heat up to +85±2°C and leave for 30 minutes. After then, cool down to 25°C. Repeat the cycle 15 times and leave on the test conditions for 1.5 hours. 5 Drop Shock Drop 150g weight onto steel floor from the height of 152cm, 19 times and 120cm, 12 times. 6 Vibration With 5g of the whole acceleration at 20 to 2000 Hz, apply a vibration for 2 hours for each of 3 directions. Solder Proof No reaching after reflow for 5±1 …

Text truncated - open the document above for the full version.

MOVON CORPORATION Report Number: MOV-13-RF-I017 Page : (1) of (33) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. FCC Part 15 Subpart B&C §15.247 Test Report Equipment Under Test Bluetooth Stereo Headset Model Name SB01 Applicant MOVON CORPORATION FCC ID TDU-SB01 Manufacturer QINGDAO MOVON ELECTRONIC CORPORATION Date of Test(s) 2013. 07. 10 ~ 2013. 07. 17 Date of Issue 2013. 07. 18 In the configuration tested, the EUT complied with the standards specified above. Issue to Issue by MOVON CORPORATION 140-28 SAMSUNG DONG, GANGNAM GU, SEOUL, KOREA Tel.: +82-2-2050-4632 Fax: +82-2-2050-4666 MOVON CORPORATION 194-1, Geumeo-ri, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea, 449-812 Tel.: +82-31-338-8837 Fax: +82-31-338-8847 MOVON CORPORATION Report Number: MOV-13-RF-I017 Page : (2) of (33) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. Revision history Revision Date of issue Description Revised by -- July 18, 2013 Initial -- MOVON CORPORATION Report Number: MOV-13-RF-I017 Page : (3) of (33) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. Table of contents 1. ATTESTATION OF TEST RESULTS ............................................................................. 4 2. EUT DESCRIPTION ........................................................................................................ 5 3. MEASUREMENT EQUIPMENT ...................................................................................... 6 4. TRANSMITTER RADIATED SPURIOUS EMISSIONS AND CONDUCTED SPURIOUS EMISSIONS .................................................................................................................. 7 5. 6 ㏈ BANDWIDTH MEASUREMENT .......................................................................... 20 6. MAXIMUM PEAK OUTPUT POWER MEASUREMENT ............................................... 23 7. POWER SPECTRAL DENSITY .................................................................................... 26 8. ANTENNA REQUIREMENT ......................................................................................... 29 9. RF EXPOSURE EVALUATION .................................................................................... 30 10. TEST SETUP PHOTO OF EUT .................................................................................. 32 MOVON CORPORATION Report Number: MOV-13-RF-I017 Page : (5) of (33) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. 2. EUT Description Kind of product Bluetooth Acessory Model Name SB01 Serial Number N/A Power supply DC 3.00 V Frequency range 2 402 ㎒ ~ 2 480 ㎒ Modulation technique GFSK(1Mbps) Number of channels 40 Antenna gain 1.926㏈i (Max.) TEST SITE REGISTRATION NUMBER FCC(670686) 2.1. Declarations by the manufacturer None 2.2. Details of modification None MOVON CORPORATION Report Number: MOV-13-RF-I017 Page : (6) of (33) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. 3. Measurement equipment Equipment Manufacturer Model Serial number Calibration Interval Calibration due. EMI Test Receiver R&S ESIB26 100196/026 1 year 2013-12-14 Signal Generator R&S SMR27 100089 1 year 2013-12-13 Spectrum Analyzer R&S FSV-40 100832 1 year 2013-10-04 Power Meter Agilent E4416A GB41290645 1 year 2013-10-04 Power Sensor Agilent 9327A US40441490 1 year 2013-10-04 Double Redge Horn Antenna R&S HF906 100236 2 year 2015-02-28 Horn Antenna A.H.SYSTEMS SAS-572 269 2 year 2013-09-07 Ultra Broadband Antenna R&S HL562 100170 1 year 2013-12-13 Power Amplifier MITEQ AM-1431 1497315 1 year 2013-10-04 Power Amplifier MITEQ AFS43-010026001374382 1 year 2013-10-04 High Pass Filter Wainwright WHK3.0/18G-10SS508 1 year 2013-10-04 DC Power Supply HP 6674A 3637A01351 1 year 2013-10-04 Controller INNCO CO2000 co200/064/6961003/LN/A N/A Antenna Master INNCO MA4000 MA4000/038/6961003/LN/A N/A Loop Antenna ETS LINDGREN 6502 00118166 2 year 2013-10-10 ※ Remark; Support equipment Description Manufacturer Model Serial number Notebook computer Samsung Electronics.SENS P30 W3179RFX300144N MOVON CORPORATION Report Number: MOV-13-RF-I017 Page : (7) of (33) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. 4. Transmitter radiated spurious emissions and conducted spurious emissions 4.1. Test setup 4.1.1. Transmitter radiated spurious emissions The diagram below shows the test setup that is utilized to make the measurements for emission from 9kHz to 30MHz Emissions. The diagram below shows the test setup that is utilized to make the measurements for emission from 30 ㎒ to 1 ㎓ emissions. MOVON CORPORATION Report Number: MOV-13-RF-I017 Page : (8) of (33) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. The diagram below shows the test setup that is utilized to make the measurements for emission from 1 ㎓ to 24 ㎓ emissions. MOVON CORPORATION Report Number: MOV-13-RF-I017 Page : (9) of (33) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, withou…

Text truncated - open the document above for the full version.

Test setup photo of EUT A. Setup photo of EUT Photo of radiated spurious emission at below 30 ㎒ Photo of radiated spurious emission at 30 ㎒ ~ 1 000 ㎒ Photo of radiated spurious emission at above 1 000 ㎒