TDU-TP1Bluetooth Headset

Movon TP1 Block Diagram ROM 15-bit Audio CODEC Baseband DSP MCURAM Bluetooth RF (2.4GHz Radio) I/O ANT TX_A TX_B V_BAT 5V DC Adapter V_BAT 240K 160K Battery 120mAh V_CHG Low BAT Detect LDO V_BAT V IN V OUT 2.7V 1.8V TALK VOL UP VOL DOWN LED_RED LED_BLUE RED BLUE 26MHz Balun Filter EEPROM I2C 1.8V

SK TECH CO., LTD. Page 1 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 External Photographs of EUT <Photograph 1: Front View> SK TECH CO., LTD. Page 2 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 <Photograph 2: Rear View> SK TECH CO., LTD. Page 3 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 <Photograph 3: AC/DC Adaptor supplied with the EUT>

ID Label Location & Sample LABEL LOCATION: Label will be printed on the REAR of the product LABEL Drawing:

SK TECH CO., LTD. Page 1 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 Internal Photographs of EUT <Photograph 1: Cover removed> SK TECH CO., LTD. Page 2 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 <Photograph 2: Front View> SK TECH CO., LTD. Page 3 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 <Photograph 3: Rear View>

Operational Description This product, TP1, is a Bluetooth device. The product operates in 2400 to 2483.5 MHz band. The channel is represented by a pseudo-random hopping sequence through the 79 channels. The channel is divided into time slots, with a nominal slot length of 625μs, where each slot corresponds to different RF hop frequencies. The nominal hop rate is 1600 hops/s. The control signals and data in the Bluetooth Chipset are modulated and processed and then pass the PA in it. They will be transmitted from ANT through the BALUN FILTER to another Bluetooth device. The RF signal from other Bluetooth devices is received via ANT. And they go through internal BALUN FILTER into the chip. They are magnified by internal LNA in the chip. The power settings and crystal trim are stored in internal flash. The product is powered from a Li-ion battery and uses an integral Planer Inverted-F Antenna [PIFA]. No external ground is required.

SPECIFICATION Model No. TP1 APP. Type Bluetooth Head set Antenna TYPE PIFA Maker MAY, 29, 2006 DESIGNED CHECKED APPROVED MOVON MOVON CORPORATION Antenna Test results Sheet - 1- Research & Development Laboratory Contact : LEE TAE HYUNG : [email protected] 1. MEASUREMENT For the antenna measurement, Frequency and VSWR is measured by using Network Analyzer after setting, while Gain is measured in the shield room 2.ELECTRICALLY CHARACTERISTIC Antenna Test results Sheet - 2- ITEM SPEC Frequency Range[MHz] 2400 ~2485 V.S.W.R. 2.0 Max Gain[dBi] 0 Bandwidth[MHz] 100 [Picture-1 Smith chart 및 VSWR] Antenna Test results Sheet - 3- 1. 3D VIEW 4. Measure results for Radiation pattern Antenna Test results Sheet - 4- Antenna radiation coordinates φ θ z y x Test condition Parameters condition Unit Chamber size 6*10*4 M Temperature 21.5 °C Humidity 55 % Measurement S21(network Analyzer) 8510C System software Midas(Orbit/FR) Version 3.0 - E,H 는 linear horn antenna : E plane(roll=0deg.)과 H plane(roll=90deg.). [Azimuth XY] Antenna Test results Sheet - 5- [Elevation XZ] Antenna Test results Sheet - 6- [Elevation YZ] Antenna Test results Sheet - 7-

SK TECH CO., LTD. Page 1 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 Test set up photos <View of Conducted RF power measurement > SK TECH CO., LTD. Page 2 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 <Radiated Emissions - Front View> <Radiated Emissions - Rear View> SK TECH CO., LTD. Page 3 of 3 SKT SKTTRT-060613-019 FCC ID: TDU-TP1, IC: 6432A-TP1 <Conducted Emissions - Front View> <Conducted Emissions - Rear View>