TE7AX10V1AX1500 Wi-Fi 6 Router

REV1.0.0 1910012597 User Guide AX1500 Wi-Fi 6 Router Archer AX10 Contents About This Guide .........................................................................................................1 Chapter 1. Get to Know About Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2. 1. Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 2. 2. The Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 2. Connect the Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 2. 1. Position Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. 2. Connect Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Chapter 3. Log In to Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Chapter 4. Work with Alexa and IFTTT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1 About This Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide provides details of each function and shows you the way to configure these functions appropriate to your needs. When using this guide, please notice that features of the router may vary slightly depending on the model and software version you have, and on your location, language, and internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide the following conventions are used: ConventionDescription Underlined Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section. Teal Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc. > The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab. Note: • Ignoring this type of note might result in a malfunction or damage to the device. Tips: Indicates important information that helps you make better use of your device. symbols on the web page • click to edit the corresponding entry. • click to delete the corresponding entry. • click to enable or disable the corresponding entry. • click to view more information about items on the page. *Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location. *Use of MU-MIMO and 1024-QAM requires clients to also support those functions. More Info The latest software, management app and utility can be found at Download Center at https://www.tp-link.com/support. The Quick Installation Guide can be found where you find this guide or inside the package of the router. 2 Specifications can be found on the product page at https://www.tp-link.com. TP-Link Community is provided for you to discuss our products at https://community.tp-link.com. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support. Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance 4 Chapter 1 Get to Know About Your Router 1. 1. Product Overview TP-Link AX router, with next-generation 802.11ax Wi-Fi Technology, achieves Wi-Fi performance at its ultimate level. The revolutionary combination of OFDMA, MU-MIMO and 1024QAM improve throughput by 4 times and dramatically increase the whole network capacity and efficiency. It’s also backwards compatible with 802.11a/b/g/n/ac. Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app. 1. 2. Appearance 1. 2. 1. Top Panel The router’s LEDs (view from left to right) are located on the front. You can check the router’s working status by following the LED Explanation table. LED Explanation LEDStatusIndication (Power) OnThe system has started up successfully. Flashing The system is starting up or the firmware is being upgraded. Do not disconnect or power off your router. OffPower is off. 5 Chapter 1 Get to Know About Your Router LED Explanation LEDStatusIndication (2.4GHz Wireless) OnThe 2.4GHz wireless band is enabled. OffThe 2.4GHz wireless band is disabled. (5GHz Wireless) OnThe 5GHz wireless band is enabled. OffThe 5GHz wireless band is disabled. (Internet) Green OnInternet service is available. Orange On The router’s Internet port is connected, but the internet service is not available. OffThe router’s Internet port is unplugged. (Ethernet) On At least one powered-on device is connected to the router’s LAN port. OffNo powered-on device is connected to the router’s LAN port. (WPS) On/Off This light remains on for 5 minutes when a WPS connection is established, then turns off. FlashingWPS connection is in progress. This may take up to 2 minutes. 1. 2. 2. The Back Panel The following parts (view from right to left) are located on the back panel. Button and Port Explanation ItemDescription P…

Text truncated - open the document above for the full version.

TP-Link Technologies Co., Ltd. Authority to Act as Agent Date: _2020-01-14____ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: _____BTL Inc/Mandy Wang______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____2021-01-14__ By: ______ _______Jing Huang_________________ (Signature 1 ) (Print name) Title: Regulatory Compliance Manager On behalf of: TP-Link Technologies Co., Ltd. (Company Name) Telephone: _75521534921_ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

TP-Link Technologies Co., Ltd. Request for Confidentiality Date: 2020-01-14 Subject: Confidentiality Request for: ______ TE7AX10V1____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term External Photos ☐ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☐ Short Term ☐ Permanent * 3 User’s Manual _____ TP-Link Technologies Co., Ltd.______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: Regulatory Compliance Manager _______Jing Huang_________________ (Signature/Title 2 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Project No.: 1905C079A Page 2 of 9 Project No.: 1905C079A Page 3 of 9 \ Project No.: 1905C079A Page 4 of 9 \

C B A 12 C 345678 B E D D A 9 料号： 12345 E 6789 颜 色 logo 底色 文字 其它 结构工程师 硬件工程师 产品工程师 平面负责人 Model: Archer AX10(US) Ver:1.20 S/N:XXXXXXXXXXXXX MA C: XX-XX-XX-XX-XX-XX Wir eless Password/PIN:XXXXXXXX S SID:TP-Link_XXXX SSID:TP-Link_XXXX_5G JOIN PRESET WI-FI Model: Archer AX1500 AX1500 Wi-Fi 6 Router FCC ID: TE7AX10V1IC: 8853A-AX10V1TP-Link Technologies Co., Ltd. No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Power: 12V 1A Default Access: http://tplinkwifi.net MADE IN CHINA 69.7*38.2mm, R3.5, C2, 公差±0.2mm 文字转曲线 C B A 12 C 345678 B E D D A 9 料号： 12345 与上一版的区别 E 6789 颜 色 名 称 版 本 材 质 模 具 机型版本号 logo 底色 文字 其它 结构工程师 硬件工程师 产品工程师 平面负责人 记 录 完成日期 设 计 3mm 3mm 3mm Model: Archer AX10(US) Ver:1.20 S/N:XXXXXXXXXXXXX MAC: XX-XX-XX-XX-XX-XX Wireless Password/PIN : XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G JOIN PRESET WI-FI Model: Archer AX10 AX1500 Wi-Fi 6 Router FCC ID: TE7AX10V1IC: 8853A-AX10V1TP-Link Technologies Co., Ltd. No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Power: 12V 1A Default Access: http://tplinkwifi.net MADE IN CHINA /DEHO/RFDWLRQ

Project No.: 1905C079A Page 5 of 9 \ \ 2.4G Ant. 1 5G Ant. 2 5G Ant. 1 2.4G Ant. 2 Project No.: 1905C079A Page 6 of 9 \ \ Project No.: 1905C079A Page 7 of 9 \ \ Project No.: 1905C079A Page 8 of 9 \ \ Project No.: 1905C079A Page 9 of 9 \

Report No.: BTL-FCCP-3-1905C079A Page 1 of 5 0 FCC RF EXPOSURE REPORT FCC ID: TE7AX10V1 Project No. : 1905C079A Equipment : AX1500 Wi-Fi 6 Router Brand Name : tp-link Test Model : Archer AX10, Archer AX1500 Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Nov. 28, 2019 Date of Test : Nov. 29, 2019 ~ Jan. 16, 2020 Issued Date : Jan. 20, 2020 Report Version : R00 Test Sample : Engineering Sample No.: DG2020010657 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compl iance with the requirement of the relative standards by BTL Inc. Prepared by : Welly Zhou Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Te l : +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-3-1905C079A Page 2 of 5 0 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Jan. 20, 2020 Report No.: BTL-FCCP-3-1905C079A Page 3 of 5 0 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Report No.: BTL-FCCP-3-1905C079A Page 4 of 5 0 T able for Filed Antenna: For 2.4GHz: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 3101502558 Dipole Weld 3.82 2 3101502557 Dipole Weld 3.82 Note: This EUT supports CDD, and all antennas have the same gain, Directional gain = G ANT +Array Gain, where Array Gain is as follows: For power spectral density measurements, N ANT = 2, N SS = 1. So Directional gain = G ANT + Array Gain =10 log (N ANT / N SS ) dB =3.82+10log(2/1)dBi=6.83. Then, the power density limit is 8-(6.83-6) = 7.17. For power measurements, Array Gain = 0 dB (N ANT ≤ 4), so the Directional gain=3.82. For 5GHz: Ant. Brand P/N Antenna Type Connector Gain (dBi) Note 1 3101502560 Dipole I-PEX 4.37 UNII-1 2 3101502559 Dipole I-PEX 4.37 UNII-1 1 3101502560 Dipole I-PEX 5.80 UNII-3 2 3101502559 Dipole I-PEX 5.80 UNII-3 Note: This EUT supports CDD, and all antennas have the same gain, Directional gain = G ANT +Array Gain, where Array Gain is as follows: 1. For UNII-1 Non-Beamforming function, For power spectral density measurements, N ANT = 2, N SS = 1. So Directional gain = G ANT + Array Gain =10 log (N ANT / N SS ) dB =4.37+10log(2/1)dBi=7.38. Then, the power spectral density limit is 17-(7.38-6)=15.62. For power measurements, Array Gain = 0 dB (N ANT ≤ 4), so the Directional gain=4.37. For UNII-3 Non-Beamforming function, For power spectral density measurements, N ANT = 2, N SS = 1. So Directional gain = G ANT + Array Gain =10 log (N ANT / N SS ) dB =5.80+10log(2/1)dBi=8.81. Then, the power spectral density limit is 30-(8.81-6)=27.19. For power measurements, Array Gain = 0 dB (N ANT ≤ 4), so the Directional gain=5.80. 2. For UNII-1 Beamforming function, Beamforming Gain: 3.00 dB. So Directional gain = 4.37+3.00=7.37. Then, output power limit is 30-(7.37-6)=28.63, the power density limit is 17-(7.37-6)=15.63. For UNII-3 Beamforming function, Beamforming Gain: 3.00 dB. So Directional gain = 5.80+3.00=8.80. Then, output power limit is 30-(8.80-6)=27.20, the power density limit is 30-(8.80-6)=27.20 Report No.: BTL-FCCP-3-1905C079A Page 5 of 5 0 2. TEST RESULTS Tune up tolerance(dBm) 2.4GHz 5GHz ±0.5 ±0.5 For 2.4GHz: Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.82 2.4099 23.16 207.0141 0.09930 1 Complies For 5GHz Non-Beamforming (UNII-1): Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 4.37 2.7353 26.42 438.5307 0.23875 1 Complies For 5GHz Non-Beamforming (UNII-3): Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.80 3.8019 26.38 434.5102 0.32881 1 Complies For 5GHz With Beamforming (UNII-1): Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 7.37 5.4576 26.25 421.6965 0.45809 1 Complies For 5GHz With Beamforming (UNII-3): Directional Gain (dBi) Directional Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te st Result 8.80 7.5858 26.34 430.5266 0.65006 1 Complies For the max simultaneous transmission MPE: Power Density (S) (mW/cm 2 ) Power Density (S) (mW/cm 2 ) Total Limit of Power Density (S) (mW/cm 2 ) Test Result 2.4GHz 5GHz 0.09930 0.65006 0.74936 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance. End of Test Report

Report No.: BTL-FCCP-2-1905C079A Page 1 of 342 FCC Radio Test Report FCC ID: TE7AX10V1 This report concerns: Original Grant Project No. : 1905C079A Equipment : AX1500 Wi-Fi 6 Router Brand Name : tp-link Test Model : Archer AX10, Archer AX1500 Series Model : N/A Applicant : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-Link Technologies Co., Ltd. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Nov. 28, 2019 Date of Test : Nov. 29, 2019 ~ Jan. 16, 2020 Issued Date : Jan. 20, 2020 Report Version : R00 Test Sample : Engineering Sample No.: DG2020010657 Standard(s) : FCC Part15, Subpart E(15.407) ANSI C63.10-2013 FCC KDB 789033 D02 General UNII Test Procedures New Rules v02r01 FCC KDB 662911 D01 Multiple Transmitter Output v02r01 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Welly Zhou Approved by : Ethan Ma Add: No.3, Jinshagang 1st Road, Shixia, Dalang Town,Dongguan, Guangdong, China. Te l : +86-769-8318-3000 Web: www.newbtl.com Report No.: BTL-FCCP-2-1905C079A Page 2 of 342 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-1905C079A Page 3 of 342 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 8 2 . GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF EUT 9 2.2 TEST MODES 12 2.3 PARAMETERS OF TEST SOFTWARE 15 2.4 DUTY CYCLE 17 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 19 2.6 SUPPORT UNITS 19 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 20 3.1 LIMIT 20 3.2 TEST PROCEDURE 20 3.3 DEVIATION FROM TEST STANDARD 20 3.4 TEST SETUP 21 3.5 EUT OPERATION CONDITIONS 21 3.6 TEST RESULTS 21 4 . RADIATED EMISSIONS TEST 22 4.1 LIMIT 22 4.2 TEST PROCEDURE 23 4.3 DEVIATION FROM TEST STANDARD 23 4.4 TEST SETUP 24 4.5 EUT OPERATION CONDITIONS 25 4.6 TEST RESULTS - 9 KHZ to 30 MHZ 25 4.7 TEST RESULTS - 30 MHz TO 1000 MHz 25 4.8 TEST RESULTS - ABOVE 1000 MHz 25 5 . BANDWIDTH TEST 26 5.1 LIMIT 26 5.2 TEST PROCEDURE 26 5.3 TEST PROCEDURE 26 Report No.: BTL-FCCP-2-1905C079A Page 4 of 342 Table of Contents Page 5.4 TEST SETUP 26 5.5 EUT OPERATION CONDITIONS 26 5.6 TEST RESULTS 26 6 . MAXIMUM OUTPUT POWER TEST 27 6.1 LIMIT 27 6.2 TEST PROCEDURE 27 6.3 DEVIATION FROM STANDARD 27 6.4 TEST SETUP 27 6.5 EUT OPERATION CONDITIONS 27 6.6 TEST RESULTS 27 7 . POWER SPECTRAL DENSITY TEST 28 7.1 LIMIT 28 7.2 TEST PROCEDURE 28 7.3 DEVIATION FROM STANDARD 28 7.4 TEST SETUP 28 7.5 EUT OPERATION CONDITIONS 28 7.6 TEST RESULTS 28 8 . FREQUENCY STABILITY MEASUREMENT 29 8.1 LIMIT 29 8.2 TEST PROCEDURE 29 8.3 DEVIATION FROM STANDARD 29 8.4 TEST SETUP 29 8.5 EUT OPERATION CONDITIONS 29 8.6 TEST RESULTS 29 9 . MEASUREMENT INSTRUMENTS LIST 30 10 . EUT TEST PHOTOS 32 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 36 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 39 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1 GHZ 44 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 47 APPENDIX E - BANDWIDTH 264 Report No.: BTL-FCCP-2-1905C079A Page 5 of 342 Table of Contents Page APPENDIX F - MAXIMUM OUTPUT POWER 276 APPENDIX G - POWER SPECTRAL DENSITY 303 APPENDIX H - FREQUENCY STABILITY 340 Report No.: BTL-FCCP-2-1905C079A Page 6 of 342 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Jan. 20, 2020 Report No.: BTL-FCCP-2-1905C079A Page 7 of 342 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart E(15.407) Standard(s) Section Test Item Test Result Judgement Remark 15.207 15.407(b) AC Power Line Conducted Emissions APPENDIX A PA SS ------ 15.407(b) 15.205(a) 15.209(a) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D PA SS ------ 15.407(a) 15.407(e) Spectrum Bandwidth APPENDIX E PA SS ------ 15.407(a) Maximum Output Power APPENDIX F PA SS ------ 15.407(a) Power Spec…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-1905C079A Page 205 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5755 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 206 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5755 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 207 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5755 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 208 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5795 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 209 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5795 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 210 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5795 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 211 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5795 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 212 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT80) Mode 5775 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 213 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT80) Mode 5775 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 214 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT80) Mode 5775 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 215 of 342 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT80) Mode 5775 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 216 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5180 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 217 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5180 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 218 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5180 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 219 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5180 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 220 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5200 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 221 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5200 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 222 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5200 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 223 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5200 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 224 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5240 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 225 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5240 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 226 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5240 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 227 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW20) Mode 5240 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 228 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW40) Mode 5190 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-1905C079A Page 229 of 342 Orthogonal Axis X Test Mode UNII-1_TX AX (HEW40) Mode 5190 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.: BTL-FCCP-2-190…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-1905C079A Page 28 of 145 10. EUT TEST PHOTO AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-1-1905C079A Page 29 of 145 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-1-1905C079A Page 30 of 145 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-1-1905C079A Page 31 of 145 Radiated Emissions Test Photos Above 1 GHz