TE7MR3040V1Protable 3G/3.75G Battery Powered Wireless N Router

TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router Rev: 1.0.0 1910010615 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. I FCC RF Radiation Exposure Statement CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. II The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) Le dispositif ne doit pas produire de brouillage préjudiciable, et (2) Ce dispositif doit accepter tout brouillage reçu,y compris un brouillage susceptible de provoquer un fonctionnement indésirable. NOTE IMPORTANTE: Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Korea Warning Statements: 당해 무선설비는 운용중 전파혼신 가능성이 있음. NCC Notice: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大 功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用， III IV 並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射 頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. CAUTION ： 1. RISK OF EXPLOSION IF BATTERY IS .REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 2. The cover shall be provided with a means to keep it closed during normal operation. TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: Portable 3G/3.75G Battery Powered Wireless N Router Model No.: TL-MR3040 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 1999/5/EC, Directives 2004/108/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU The above product is in conformity with the following standards or other normative documents ETSI EN 300 328 V1.7.1: 2006 ETSI EN 301 489-1 V1.9.2:2011& ETSI EN 301 489-17 V2.1.1:2009 EN55022:2010 EN55024:2010 EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2008 EN60950-1:2006+A11： 2009+A1:2010+A12:2011 The product carries the CE Mark: Person is responsible for marking this declaration: Yang Hongliang Product Manager of International Business Date of issue: 2012 TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China EN62209-2:2010 CONTENTS Package Contents..........................................…

Text truncated - open the document above for the full version.

Building 24 (floors 1,3,4,5) and 28 (floors1-4) Central Science and Technology Park,Shennan Rd, Nanshan, TEL: 86-755-26525554 October 8, 2012 DECLARATION LETTER Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement FCC ID: TE7MR3040V1 The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! ---------------------------------------------------------------- Name: / Title: Yongquan Wang/ Product Dept. Manager Tel: 86-755-26525554 Fax: 86-755-26508930 E-mail: [email protected]

TP-Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Date: 2012‐07‐26 AUTHORIZATION LETTER To whom it may concern: We, the undersigned TP‐Link Technologies Co., Ltd., hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC approval and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Name: Yongquan Wang TP‐Link Technologies Co., Ltd. Tel.: +86‐755‐26502509 Fax.: +86‐755‐26508930 E‐mail: public@tp‐link.com.cn

TP-Link Technologies Co., Ltd. Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Date: 2012‐09‐3 FCC ID: TE7MR3040V1 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applican t and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Name: Yongquan Wang TP‐Link Technologies Co., Ltd. Tel.: +86‐755‐26502509 Fax.: +86‐755‐26508930 E‐mail: public@tp‐link.com.cn r User Guide 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or IEEE 802.11n/ IEEE 802.11g/ IEEE 802.11b wireless network. The TD-W8951ND connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors. Multiple workstations can be networked and connected to the Internet using a single Wide Area Network (WAN) interface and single global IP address. The advanced security enhancements, IP/MAC Filter, Application Filter and URL Filter can help to protect your network from potentially devastating intrusions by malicious agents from the outside of your network. Quick Start of the Web-based Utility is supplied and friendly help messages are provided for the configuration. Network and Router management is done through the Web-based Utility which can be accessed through local Ethernet using any web browser. ADSL The TD-W8951ND supports full-rate ADSL2+ connectivity conforming to the ITU and ANSI specifications. In addition to the basic DMT physical layer functions, the ADSL2+ PHY supports dual latency ADSL2+ framing (fast and interleaved) and the I.432 ATM Physical Layer. Wireless In the most attentive wireless security, the Router provides multiple protection measures. It can be set to turn off the wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The Router provides wireless LAN 64/128-bit WEP encryption security, WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. 1.2 Main Features  Four 10/100Mbps Auto-Negotiation RJ45 LAN ports (Auto MDI/MDIX), one RJ11 port.  Provides external splitter.  Adopts Advanced DMT modulation and demodulation technology.  Supports bridge mode and Router function.  Multi-user sharing a high-speed Internet connection. 2  Downstream data rates up to 24Mbps, upstream data rates up to 3.5Mbps（With Annex M enabled）.  Supports long transfers, the max line length can reach to 6.5Km.  Supports remote configuration and management through SNMP and CWMP.  Supports PPPoE, it allows connecting the internet on demand and disconnecting from the Internet when idle.  Provides reliable ESD and surge-protect function with quick response semi-conductive surge protection circuit.  High speed and asymmetrical data transmit mode, provides safe and exclusive bandwidth.  Supports All ADSL industrial standards.  Compatible with all mainstream DSLAM (CO).  Provides integrated access of internet and route function which face to SOHO user.  Real-time Configuration and device monitoring.  Supports Multiple PVC (Permanent Virtual Circuit).  Built-in DHCP server.  Built-in firewall, supporting IP/MAC filter, Application filter and URL filter.  Supports Virtual Server, DMZ host and IP Address Mapping.  Supports Dynamic DNS, UPnP and Static Routing.  Supports system log and flow Statistics.  Supports firmware upgrade and Web management.  Provides WPA-PSK/WPA2-PSK data security, TKIP/AES encryption security.  Provides 64/128-bit WEP encryption security and wireless LAN ACL (Access Control List). 3

Attestation for FCC Declaration of Conformity FCC ID: TE7MR3040V1 Date: 2012-8-23 Please be notified that we, the undersigned, TP-LINK TECHNOLOGIES CO., LTD declare that the product bears the above FCC ID is also complying with the requirements of FCC DoC. The test report number for FCC DoC is FD120521C27, with is issued by an accredited lab, Bureau Veritas Consumer Products Services(H.K.) Ltd., Taoyuan Branch located at No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan. Which has been accredited in accordance to all of the requirements of 47CFR 2.948(d) and (e) of the FCC rules and KDB349827. Sincerely, Name of authorized signer: Yongquan Wang Title of authorized signer: Product Dept. Manager Company Name: TP-LINK Technologies Co., Ltd. Tel: 86-755-26525554 Fax: 86-755-26508930 Web site: WWW.TP-LINK.COM E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5

Report No. RXA1206-0371SAR01 Page 1 of 67 TESTING No. L2264 OET 65 TEST REPORT Product Name Portable 3G/3.75G Battery Powered Wireless N Router Model TL-MR3040 FCC ID TE7MR3040V1 Client TP-LINK TECHNOLOGIES CO., LTD. TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report Report No. RXA1206-0371SAR01 Page 2 of 67 GENERAL SUMMARY Product Name Portable 3G/3.75G Battery Powered Wireless N Router Model TL-MR3040 FCC ID TE7MR3040V1 Report No. RXA1206-0371SAR01 Client TP-LINK TECHNOLOGIES CO., LTD. Manufacturer TP-LINK TECHNOLOGIES CO., LTD. Reference Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radiofrequency Electromagnetic Fields, 3 kHz to 300 GHz. SUPPLEMENT C Edition 01-01 to OET BULLETIN 65 Edition 97-01 June 2001 including DA 02-1438, published June 2002: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Additional Information for Evaluation Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions. KDB 941225 D06 Hot Spot SAR v01 SAR Evaluation Procedures for Portable Devices with Wireless Router Capabilities KDB 447498 D01 Mobile Portable RF Exposure v04: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: June 29 th , 2012 Comment The test result only responds to the measured sample. Approved by Director Revised by SAR Manager Performed by SAR Engineer TA Technology (Shanghai) Co., Ltd. Test Report Report No. RXA1206-0371SAR01 Page 3 of 67 TABLE OF CONTENT 1. General Information ........................................................................................................................ 4 1.1. Notes of the Test Report.......................................................................................................... 4 1.2. Testing Laboratory ................................................................................................................... 4 1.3. Applicant Information ............................................................................................................... 5 1.4. Manufacturer Information ......................................................................................................... 5 1.5. Information of EUT................................................................................................................... 6 1.6. The Maximum SAR 1g Values ................................................................................................... 7 1.7. Test Date ................................................................................................................................. 7 2. SAR Measurements System Configuration..................................................................................... 8 2.1. SAR Measurement Set-up ....................................................................................................... 8 2.2. DASY5 E-field Probe System .................................................................................................. 9 2.2.1. EX3DV4 Probe Specification ............................................................................................ 9 2.2.2. E-field Probe Calibration ................................................................................................. 10 2.3. Other Test Equipment ............................................................................................................10 2.3.1. Device Holder for Transmitters ....................................................................................... 10 2.3.2. Phantom ..........................................................................................................................11 2.4. Scanning Procedure ..............................................................................................................11 2.5. Data Storage and Evaluation ................................................................................................. 13 2.5.1. Data Storage...................................................................................................................13 2.5.2. Data Evaluation by SEMCAD ......................................................................................... 13 3. Laboratory Environment................................................................................................................ 15 4. Tissue-equivalent Liquid ............................................................................................................... 16 4.1. Tissue-equivalent Liquid Ingredients...................................................................................... 16 4.2. Tissue-equivalent Liquid Properties ....................................................................................... 16 5. System Check ............................................................................................................................... 17 5.1. Description of System Check ................................................................................................. 17 5.2. System Check Results ...........................................................................................................18 6. Operational Conditions during Test............................................................................................... 19 6.1. General Description of Test Procedures................................................................................ 19 6.2. Test Positions of Portable Devices......................................................................................... 20 7. Test Results .............................................…

Text truncated - open the document above for the full version.

Report No.: RF120521C27 1 of 65 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF120521C27 MODEL NO.: TL-MR3040 FCC ID: TE7MR3040V1 IC: 8853A-MR3040V1 RECEIVED: May 21, 2012 TESTED: Jun. 01 ~ Jul. 07, 2012 ISSUED: Aug. 27, 2012 APPLICANT: TP-LINK TECHNOLOGIES CO., LTD. ADDRESS: Building 24 (floors 1, 3, 4, 5) and 28 (floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120521C27 2 of 65 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................. 5 1. CERTIFICATION ..................................................................................................................... 6 2. SUMMARY OF TEST RESULTS ............................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY .......................................................................................... 7 3. GENERAL INFORMATION ..................................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................................... 8 3.2 DESCRIPTION OF TEST MODES ......................................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ....................................... 10 3.3 DESCRIPTION OF SUPPORT UNITS ................................................................................. 12 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .................................................................. 13 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ...................................................... 15 4. TEST TYPES AND RESULTS ............................................................................................... 16 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................................... 16 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................ 16 4.1.2 TEST INSTRUMENTS .......................................................................................................... 17 4.1.3 TEST PROCEDURES ........................................................................................................... 18 4.1.4 DEVIATION FROM TEST STANDARD ................................................................................. 18 4.1.5 TEST SETUP ........................................................................................................................ 19 4.1.6 EUT OPERATING CONDITIONS .......................................................................................... 19 4.1.7 TEST RESULTS .................................................................................................................... 21 4.2 CONDUCTED EMISSION MEASUREMENT........................................................................ 35 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ..................................................... 35 4.2.2 TEST INSTRUMENTS .......................................................................................................... 35 4.2.3 TEST PROCEDURES ........................................................................................................... 36 4.2.4 DEVIATION FROM TEST STANDARD ................................................................................. 36 4.2.5 TEST SETUP ........................................................................................................................ 36 4.2.6 EUT OPERATING CONDITIONS .......................................................................................... 36 4.2.7 TEST RESULTS .................................................................................................................... 37 4.3 6dB BANDWIDTH MEASUREMENT .................................................................................... 41 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ................................................................. 41 4.3.2 TEST SETUP ........................................................................................................................ 41 4.3.3 TEST INSTRUMENTS ....…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Test Mode A 2 Test Mode B 3 Radiated Emission Test Test Mode A 4 Test Mode B