TE7WN727NV4150Mbps Wireless N USB Adapter

TL-WN727N 150Mbps Wireless N USB Adapter Rev: 4.0.0 1910010945 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2013 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1） This device may not cause harmful interference. 2） This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been SAR-evaluated for use in hand. SAR measurements are based on a 5mm spacing from the body and that compliance is achieved at that distance. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux norms CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1)cet appareil ne doit pas provoquer d’interférences et (2)cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. Industry Canada Statement Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Korea Warning Statements 당해 무선설비는 운용중 전파혼신 가능성이 있음. NCC Notice & BSMI Notice 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功 率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。  ●插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 ●請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information z When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. z Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. z Avoid water and wet locations. z This product can be used in the following countries: AT BG BY CA CZ DE DK EE ES FI FR GB GR HU IE IT LT LV MT NL NO PL PT RO RU SE SK TR UA TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N USB Adapter Model No.: TL-WN727N Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 1999/5/EC, Directives 2006/95/EC, Directives1999/519/EC, Directives 2011/65/EU The above prod…

Text truncated - open the document above for the full version.

AGENCYAUTHORIZATIONLETTER FCCID:TE7WN727NV4 Date:December02,2013 Towhomitmayconcern: We,theundersigned,herebyauthorizeAudixTechnology(Shenzhen)Co.,Ltd (No.6,KeFengRd.,52Block,ShenzhenScience&Industrial Park,Nantou,Shenzhen,Guangdong,China)toactonourbehalf,asouragent,in thefollowingmattersrelatedtotheFCCapprovalofourproducts:reportsubmittal, relatedcorrespondence,thesigningofalldocumentsrelatingtothesematters, andanyotherlawfulactivitynecessarytoobtainsuchcertification.Anyactcarried outbyAudixwithinthescopeofthisauthorizationshallhavethesameeffectsas ourown. Thisauthorizationshallexpire6monthsfromoriginaldate.Ifyouhaveany questionsregardingtheauthorization,pleasedon’thesitatetocontactus. Thankyou. Sincerely, Nameofauthorizedsigner:YongquanWang Titleofauthorizedsigner:ProductDept.Manager CompanyName:TP-LINKTechnologiesCo.,Ltd. Tel:86-755-26525554 Fax:86-755-26508930 Website:WWW.TP-LINK.COM E-mail:[email protected]

Date:Dec02,2013 FederalCommunicationsCommission AuthorizationandEvaluationDivision FCCID:TE7WN727NV4 ConfidentialityRequest PursuanttoSections0.457and0.459oftheCommission’sRules,the Applicantherebyrequestsconfidentialtreatmentofinformationaccompanying thisapplicationasoutlinedbelow: 1.Blockdiagram 2.Schematics 3.OperationDescription Theabovematerialscontaintradesecretsandproprietaryinformationnot customarilyreleasedtothepublic.Thepublicdisclosureofthesematters mighttoharmfultotheapplicantandprovideunjustifiedbenefitstoits competitors. TheapplicantunderstandsthatpursuanttoRule0.457,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethe dateofthegrantforthisapplication. Sincerely, Nameofauthorizedsigner:YongquanWang Titleofauthorizedsigner:ProductDept.Manager CompanyName:TP-LINKTechnologiesCo.,Ltd. Tel:86-755-26525554 Fax:86-755-26508930 Website:WWW.TP-LINK.COM E-mail:[email protected]

AttestationforFCCDeclarationofConformity FCCID:TE7WN727NV4Date:2013-12-02 Pleasebenotifiedthatwe,theundersigned,TP-LINKTECHNOLOGIESCO., LTDdeclarethattheproductbearstheaboveFCCIDisalsocomplyingwith therequirementsofFCCDoC.ThetestreportnumberforFCCDoCis EM-F1020887,withisissuedbyanaccreditedlab,AudixTechnology Corporation,EMCDepartmentlocatedatNo.53-11,Tin-FuTsun,Lin-Kou, TaipeiHsien,Taiwan.Whichhasbeenaccreditedinaccordancetoallofthe requirementsof47CFR2.948(d)and(e)oftheFCCrulesandKDB349827. Sincerely, Nameofauthorizedsigner:YongquanWang Titleofauthorizedsigner:ProductDept.Manager CompanyName:TP-LINKTechnologiesCo.,Ltd. Tel:86-755-26525554 Fax:86-755-26508930 Website:WWW.TP-LINK.COM E-mail:[email protected]

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 14-1 14. PHOTOS OF THE EUT Figure 1 General Appearance of the EUT Figure 2 General Appearance of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 14-2 Figure 3 General Appearance of the EUT Figure 4 General Appearance of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 14-3 Figure 5 General Appearance of the EUT Figure 6 General Appearance of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 14-4 Figure 7 General Appearance of the EUT Figure 8 General Appearance of the EUT

1:1 39.7*9.7mm, 1R,公差±0.2mm 文字转曲线 code128码，工程部直接打印于锡标 此图条码仅为示意 2:1放大效果图： C B A 12 C 345678 B E D D A 9 料号： 12345 与上一版的区别 E 6789 颜 色 名 称 版 本 材 质 模 具 机型版本号 logo 底色 文字 其它 结构工程师 硬件工程师 产品工程师 平面负责人 记 录 完成日期 设 计 3mm 3mm 3mm 文字方向 文字方向 简化效果示意图 TL-WN727N(UN)4.0 TL-WN727N(UN)4.0 PANTONE 426C FCC ID:TE7WN727NV4 Model: TL - WN727N IC:8853A - WN727N

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 14-5 Figure 9 Inside of the EUT Figure 10 Components Side of the PCB R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 14-6 Figure 11 Components Side of the PCB

R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF13018 Page 1 of 122 FCC SAR TEST REPORT for TP-LINK TECHNOLOGIES CO., LTD. 150Mbps Wireless N USB Adapter Model No. : TL-WN727N FCC ID : TE7WN727NV4 Prepared for : TP-LINK TECHNOLOGIES CO., LTD. Building 24(floors 1,3,4,5) and 28 (floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Prepared By : Audix Technology (Shenzhen) Co., Ltd. No. 6, Ke Feng Rd., 52 Block, Shenzhen Science & Industrial Park, Nantou, Shenzhen, Guangdong, China Tel: (0755) 26639496 Fax: (0755) 26632877 Report Number ： ACS-SF13018 Date of Test ： Dec.20~22, 2013 Date of Report ： Jan.14, 2014 R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF13018 Page 2 of 122 TABLE OF CONTENTS Description Page Test Report Verification...........................................................................3 1. GENERAL INFORMATION ...................................................................................................... 4 1.1. Description of Device (EUT) ............................................................................................................ 4 2. GENERAL DESCRIPTION ........................................................................................................ 5 2.1. Product Description For EUT ............................................................................................................ 5 2.2. Applied Standards ............................................................................................................................. 5 2.3. Device Category and SAR Limits ..................................................................................................... 5 2.4. Test Conditions ................................................................................................................................. 5 2.5. Exposure Positions Consideration ..................................................................................................... 6 2.6. Tested Supporting System Details .................................................................................................... 7 2.7. Block Diagram of connection between EUT and simulators ............................................................ 7 2.8. Test Equipment ................................................................................................................................. 8 2.9. Laboratory Environment ................................................................................................................. 10 2.10. Measurement Uncertainty ............................................................................................................... 10 2.11. Statement of Compliance ................................................................................................................ 12 3. MEASURE PROCEDURES ...................................................................................................... 13 3.1. General description of test procedures ............................................................................................ 13 3.2. Position of module in Portable devices ........................................................................................... 14 4. SAR MEASUREMENTS SYSTEM ......................................................................................... 15 4.1. SAR Measurement Set-up ............................................................................................................... 15 4.2. ELI Phantom ................................................................................................................................... 16 4.3. Device Holder for SAM Twin Phantom .......................................................................................... 17 4.4. DASY5 E-field Probe System ......................................................................................................... 18 4.5. E-field Probe Calibration ................................................................................................................ 19 4.6. Scanning procedure ......................................................................................................................... 20 5. DATA STORAGE AND EVALUATION ................................................................................ 22 5.1. Data Storage .................................................................................................................................... 22 5.2. Data Evaluation by SEMCAD ........................................................................................................ 22 6. SYSTEM CHECK ...................................................................................................................... 24 7. TEST RESULTS ......................................................................................................................... 25 7.1. Exposure to Radio Frequency Energy ............................................................................................. 25 7.2. Average power VS Data Rate(WIFI 2.4GHz) ................................................................................. 25 7.3. System Check for Body Tissue simulating liquid ........................................................................... 27 7.4. Test Results ..................................................................................................................................... 27 7.5. Composition of Ingredients for Tissue Simulating Liquids ............................................................ 30 7.6. Dielectric Performance for Body Tissue simulating liquid ............................................................. 31 8. ANNEX A: SYSTEM CHECK RESULTS .............................................................................. 32 9. ANNEX B: GRAPH RESULTS .........................................…

Text truncated - open the document above for the full version.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of TP-LINK TECHNOLOGIES CO., LTD. 150Mbps Wireless N USB Adapter Model No.: TL-WN727N FCC ID: TE7WN727NV4 Prepared for : TP-LINK TECHNOLOGIES CO., LTD. Building 24(floors 1,3,4,5) and 28 (floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Prepared By : Audix Technology (Shenzhen) Co., Ltd. No. 6, Ke Feng Rd., 52 Block, Shenzhen Science & Industrial Park, Nantou, Shenzhen, Guangdong, China Tel: (0755) 26639496 Report Number ： ACS-F13337 Date of Test ： Oct.31~Nov.21, 2013 Date of Report ： Nov.28, 2013 R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 TABLE OF CONTENTS Description Page 1. SUMMARY OF STANDARDS AND RESULTS ......................................................... 1-1 1.1. Description of Standards and Results ................................................................................... 1-1 2. GENERAL INFORMATION ......................................................................................... 2-1 2.1. Description of Device (EUT) ............................................................................................... 2-1 2.2. Test Information ................................................................................................................... 2-2 2.3. Tested Supporting System Details ........................................................................................ 2-3 2.4. Block Diagram of Test Setup ............................................................................................... 2-3 2.5. Test Facility .......................................................................................................................... 2-4 2.6. Measurement Uncertainty (95% confidence levels, k=2) ..................................................... 2-4 3. POWER LINE CONDUCTED EMISSION TEST ....................................................... 3-1 3.1. Test Equipments ................................................................................................................... 3-1 3.2. Block Diagram of Test Setup ............................................................................................... 3-1 3.3. Power Line Conducted Emission Test Limits ...................................................................... 3-1 3.4. Configuration of EUT on Test .............................................................................................. 3-1 3.5. Operating Condition of EUT ................................................................................................ 3-2 3.6. Test Procedure ...................................................................................................................... 3-2 3.7. Power Line Conducted Emission Test Results ..................................................................... 3-2 4. RADIATED EMISSION TEST ...................................................................................... 4-1 4.1. Test Equipment ..................................................................................................................... 4-1 4.2. Block Diagram of Test Setup ............................................................................................... 4-1 4.3. Radiated Emission Limit ...................................................................................................... 4-2 4.4. EUT Configuration on Test .................................................................................................. 4-3 4.5. Operating Condition of EUT ................................................................................................ 4-3 4.6. Test Procedure ...................................................................................................................... 4-3 4.7. Radiated Emission Test Results ........................................................................................... 4-4 5. CONDUCTED SPURIOUS EMISSIONS ..................................................................... 5-1 5.1. Test Equipment ..................................................................................................................... 5-1 5.2. Limit ..................................................................................................................................... 5-1 5.3. Test Procedure ...................................................................................................................... 5-1 5.4. Test result ............................................................................................................................. 5-1 6. BAND EDGE COMPLIANCE TEST ............................................................................ 6-1 6.1. Test Equipment ..................................................................................................................... 6-1 6.2. Limit ..................................................................................................................................... 6-1 6.3. Test Produce ......................................................................................................................... 6-1 6.4. Test Results .......................................................................................................................... 6-1 7. 6dB Bandwidth Test ........................................................................................................ 7-1 7.1. Test Equipment ..................................................................................................................... 7-1 7.2. Limit ..................................................................................................................................... 7-1 7.3. Test Procedure ...........................................................................…

Text truncated - open the document above for the full version.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 13-1 13. PHOTOGRAPH OF TEST 13.1.Photos of Power Line Conducted Emission Test R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 13-2 13.2.Photos of Radiated Emission Test R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:TE7WN727NV4 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F13337 13-3 (Above 1000MHz)