TE7WR842NV3300Mbps Multi-Function Wireless N Router

TL-WR842N 300Mbps Multi-Function Wireless N Router Rev: 4.0.1 1910011575 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1） This device may not cause harmful interference. 2） This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Industry Canada Statement Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Korea Warning Statements 당해 무선설비는 운용중 전파혼신 가능성이 있음. NCC Notice & BSMI Notice 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即 停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射 頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 安全諮詢及注意事項  請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。  清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。  注意防潮，請勿將水或其他液體潑灑到本產品上。  插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。  請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。  請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information  When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.  Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us.  Avoid water and wet locations. This product can be used in the following countries: AT BG BY CA CZ DE DK EE ES FI FR GB GR HU IE IT LT LV MT NL NO PL PT RO RU SE SK TR UA US TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LT D . Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DEC…

Text truncated - open the document above for the full version.

TP-LINK TECHNOLOGIES CO., LTD. Date：2015-12-4 Federal Communications Commission Authorization and Evaluation Division FCC ID: TE7WR842NV3 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Yongquan Wang / Product Dept. Manager TP-LINK TECHNOLOGIES CO., LTD.

TP-LINK TECHNOLOGIES CO., LTD Date: 2015-12-4 Federal Communications Commission Authorization and Evaluation Division FCC ID: TE7WR842NV3 ATTESTATION FCC ID: TE7WR842NV3 Product: 300Mbps Multi-Function Wireless N Router Model: TL-WR842N We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Yongquan Wang / Product Dept. Manager TP-LINK TECHNOLOGIES CO., LTD.

TP-LINK TECHNOLOGIES CO., LTD. We Name: TP-LINK TECHNOLOGIES CO., LTD. Address: Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan City: Shenzhen  . Country: China . Declare that: Agent Company name: QuieTek Technology (Suzhou) Co., Ltd. Address: No.99 Hongye Rd., Suzhou Industrial Park , City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: 300Mbps Multi-Function Wireless N Router ............ Type designation: TL-WR842N  FCC ID: TE7WR842NV3 on our behalf. Date:  2015-12-4.. Name:  Yongquan Wang  .. Function: ...... Product Dept. Manager ............ ................ Signature:  ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

EUT External Photograph Page 1 of 8 (1) EUT Photo (2) EUT Photo EUT External Photograph Page 2 of 8 (3) EUT Photo (4) EUT Photo EUT External Photograph Page 3 of 8 (5) EUT Photo (6) EUT Photo EUT External Photograph Page 4 of 8 (7) EUT Photo Adapter#1 (8) EUT Photo Adapter#1 EUT External Photograph Page 5 of 8 (9) EUT Photo Adapter#1 (10) EUT Photo Adapter#2 EUT External Photograph Page 6 of 8 (11) EUT Photo Adapter#2 (12) EUT Photo Adapter#2 EUT External Photograph Page 7 of 8 (13) EUT Photo Adapter#3 (14) EUT Photo Adapter#3 EUT External Photograph Page 8 of 8 (15) EUT Photo Adapter#3

EUT Internal Photograph Page 1 of 3 (1) EUT Photo (2) EUT Photo EUT Internal Photograph Page 2 of 3 (3) EUT Photo (4) EUT Photo EUT Internal Photograph Page 3 of 3 (5) EUT Photo

Test Report FCC Part15 Subpart C Product Name : 300Mbps Multi-Function Wireless N Router Model No. : TL-WR842N FCC ID : TE7WR842NV3 Applicant : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : Sept. 02, 2015 Test Date : Sept. 02, 2015~ Nov. 18, 2015 Issued Date : Dec. 31, 2015 Report No. : 1590163R-RF-US-P06V01 Report Version : V1.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Report No: 1590163R-RF-US-P06V01 Page: 3 of 127 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site :http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park, Suzhou,215006, Jiangsu, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. : BSMI, NCC, TAF USA : FCC Japan : VCCI China : CNAS Report No: 1590163R-RF-US-P06V01 Page: 4 of 127 TABLE OF CONTENTS Description Page 1. General Information ................................................................................................. 7 1.1. EUT Description ...................................................................................................... 7 1.2. Mode of Operation ................................................................................................. 11 1.3. Tested System Details ........................................................................................... 12 1.4. Configuration of Tested System ............................................................................. 13 1.5. EUT Exercise Software .......................................................................................... 14 2. Technical Test ........................................................................................................ 15 2.1. Summary of Test Result ......................................................................................... 15 2.2. Test Environment ................................................................................................... 16 3. Conducted Emission .............................................................................................. 17 3.1. Test Equipment ...................................................................................................... 17 3.2. Test Setup.............................................................................................................. 17 3.3. Limit ....................................................................................................................... 18 3.4. Test Procedure ...................................................................................................... 18 3.5. Uncertainty ............................................................................................................ 18 3.6. Test Result ............................................................................................................. 19 4. Radiated Emission ................................................................................................. 21 4.1. Test Equipment ...................................................................................................... 21 4.2. Test Setup.............................................................................................................. 22 4.3. Limit ....................................................................................................................... 23 4.4. Test Procedure ...................................................................................................... 23 4.5. Uncertainty ............................................................................................................ 24 4.6. Test Result ............................................................................................................. 25 5. RF Antenna Conducted Spurious .......................................................................... 31 5.1. Test Equipment ...................................................................................................... 31 5.2. Test Setup.............................................................................................................. 31 5.3. Limit ....................................................................................................................... 31 5.4. Test Procedure ...................................................................................................... 32 5.5. Uncertainty ..............................................................................…

Text truncated - open the document above for the full version.

Test Setup Photograph for Part 15.247 Description: Radiated Emission Test Setup for Below 1GHz Description: Radiated Emission Test Setup for 1~18GHz Description: Radiated Emission Test Setup for Above 18GHz Description : Front View of Conducted Test Description : Back View of Conducted Test