TKH-A109-TSM2Tri-Band GSM Phone TSM2, A109

- -- - 6 66 6 - -- - Safety information For your safety, please read the following instructions prior to the use of the phone. Violation of the following instructions is illegal and dangerous. Advice for safety and maintenance of the device - Do not try to disassemble or repair the mobile phone. - Keep it from humidity and moisture. - Do not use strong detergents or harmful chemicals to clean the device. Use a smooth cloth instead. - Do not apply strong impact on the device. - The device shall be located closely to the switch for easy access to the battery charger. - Do not place the mobile phone at a high temperature, which may cause defects in the device. - If the device is repaired by an unauthorized person, its guarantee will be void and the maker is not responsible for any defects caused by. - Do not remove the battery while the mobile phone is on, which will cause defects in the product. - Ambient temperature of about 25 degrees is recommended for normal operation of the mobile phone. - If the mobile phone or one of its parts (charger, battery, etc.) fails to operate, contact the agent you enlisted in. FCC statement Modification statement The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Vitelcom Mobile Safety Instructions - -- - 7 77 7 - -- - Technology S.A. may void the user’s authority to operate the equipment. Class B digital devices regulatory notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 1 or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio or television technician for help Wireless notice This product emits radio frequency energy, but it has been tested and the the SAR levels are far bellow the FCC limits. While there may be differences between the SAR levels of various phones and at various positions, they - -- - 8 88 8 - -- - all meet the government requirement for RF exposure. For body-worn operation, the phone meets FCC RF exposure guidelines provided that it is used with accessories that contain no metallic components in its construction and provides a separation of at least 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Measurement of radio frequency exposed (absorbed special rate information SAR) This mobile phone is a transmitter-receiver with the low-output electric wave. The mobile phone conforms to mandatory requirements of EU standard related with radio wavelength exposed, This product is designed and manufactured, kept from exceeding the exposed range of radio frequency energy as EU council has recommended. The international standard value is developed on the basis of thorough and regular scientific researches and evaluation (examination) by an independent research institute. The range standard is to search for safety of all regardless of age or health state. Standard value exposed of the mobile phone is displayed in “Specific Absorption Rate” (SAR) unit. The SAR range (limit) that EU council recommends is 2.0w/kg. Based on the mobile functions, SAR test will be performed, and then the mobile sends the maximum output at the certified frequency. Its maximum output will be measured in SAR, but the level of the usual SAR will be far less than the maximum value. It is because the mobile phone is designed to - -- - 36 3636 36 - -- - Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized. - -- - 9 99 9 - -- - operate at various strength of frequency. Consequently you are required to use the phone with the minimum strength as necessary in the communication network. In general, the closer a transmitting tower is, the lower the strength is. The manufacturer shall demonstrate that the phone conforms to R&TTE standard of Europe prior to release in the communication market. All of these requirements are mandatory to keep all the users safe and healthy. The maximum output of SAR in the phone is tested to be 1,15W/Kg. SAR limit for all the used mobile phones is 2.0 W/Kg for 10g of the human body, which is the maximum value in consideration of the additional safety items so to include all the other variables. SAR’s standard value can be changed to cope with national requirements and functions of the communication service network. Communication network service The product is approved to be available in GSM850~1900 environment. Please read the user manual carefully to get familiar with the functions of the device. Besides, this mobile phone is allowed to accept other communication network services. However, you need to contact the operator to use the services. How to join will be described later. Safety on the road Please remember that use of the mobile phone is prohibited during driving. And follow the related laws in your country. Before answering the phone or making a call, stop the car in a safe place. In case of emergency, please keep in mind the following instructions before using the mobile phone: Concentrate on…

Text truncated - open the document above for the full version.

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 June 30, 2006 RE: 15.19 Statement (FCC ID: TKH-A109-TSM2) TO WHOM IT MAY CONCERN The statement: "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation” Is not placed in the label of the equipment due to the following reasons: - Type label is too small (No room for this writing). - Required text is already included in the user guide This statement is placed in a prominent location in the instruction manual. Please contact me if there is any information you may need. If you have any questions, please feel free to contact me at the address shown below. Sincerely, P.A. Mr. Rafael Abad SW Validation Managing Director Vitelcom Mobile Tecnology, S.A. Parque Tecnologico de Andalucia, Av. Juan López Peñalver, E-29590 Campanillas-Malaga, SPAIN

attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: LETTER OF AGENT AUTHORIZATION June 30, 2006 To Whom It May Concern: We, the undersigned, hereby authorize MET Laboratories, Inc. to act on our behalf in all matters relating to application for equipment authorizations (FCC ID: TKH-A109-TSM2), including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, P.A. Mr. Rafael Abad SW Validation Managing Director Vitelcom Mobile Technology Parque Tecnologico de Andalucia, Av. Juan López Peñalver, E-29590 Campanilla-Málaga, SPAIN

attn: Reviewing Engineer Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Declaration of equivalence (FCC ID: TKH-A109-TSM2) Vitecom Mobile Technology S.A. declares under our own reposability the equivalence of the products: A109 TSM2 Both products have the same PCB, components, circuits, antennas, functionality, etc. and the only difference is the commercial designation. Signed in Málaga on behalf of Vitelcom Mobile Technology S.A. P.A. Date: 30/06/2006 Name: Rafael Abad Cano Company: Vitelcom Mobile Technology S.A. Address: Parque Tecnológico de Andalucía Av. Juan López Peñalver, E-29590 Campanillas-Málaga SPAIN Phone: +34 669753333 E-mail: [email protected]

DOC-FCC009 4/14/2005 Page 1 of 3 FEDERAL COMMUNICATIONS COMMISSION - FCC FORM 731 APPLICATION FOR EQUIPMENT AUTHORIZATION Approved by OMB 3060 - 0934 Expires 2006-03-14 Item 1. Applicant's complete, legal business name: Vitelcom Mobile Technology S.A. Item 2. Applicant's mailing address Line 1: Parque Tecnologico de Andalucia Line 2: Av. Juan Lopez Peñalver P.O.Box: City: Campanillas-Málaga State: Málaga Country (if foreign address): Spain Zip/Postal Code: E-25950 Item 3. FCC ID: TKH-A109-TSM2 Grantee code: TKH Equipment Product Code (14 characters maximum): -A109-TSM2 Item 4. Person at the applicant's address to receive grant or for contact: First Name: Mail Stop: Last Name: Telephone: Ext: Title: E-mail: Fax No: Item 5. Instead of Applicant, the original Grant is authorized to be mailed to: Centro de Tecnología de las Comunicaciones S.A. (CETECOM) Paque Tecnologico de Andalucía Severo Ochoa 2 E-29590 Campanillas, Málaga SPAIN ATTN: Ricardo Orejas Phone: +34952619317 Fax: +34952619113 E-mail: [email protected] Item 6. Technical Contact: Firm Name: Vitelcom Mobile Technology, S.A. Telephone: +34 952367590 Ext: Fax No: +34 952367590 First Name: Rafael Middle Initial: Last Name: Abad Address Line 1: Parque Tecnológico de Andalucía P.O.Box: Address Line 2: Av. Juan Lopez Peñalver City: Campanillas - Málaga Country (if foreign address): Spain Zip/Postal Code: E-29590 E-mail: [email protected] Item 7. Non-Technical Contact: Firm Name: Vitelcom Mobile Technology, S.A. Telephone: +34 952367590 Ext: Fax No: +34 952367590 First Name: Rafael Middle Initial: Last Name: Abad Address Line 1: Parque Tecnológico de Andalucía P.O.Box: Address Line 2: Av. Juan Lopez Peñalver City: Campanillas - Málaga Country (if foreign address): Spain Zip/Postal Code: E-29590 E-mail: [email protected] Item 8. * Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules? If "Yes" see instructions. (please mark as appropriate) X Yes Ο No Item 9. Does the applicant request that the Commission defer grant of this application pursuant 47 CFR § 0.457(d)(1)(ii)? (See instructions) NO If so, specify date when grant may be issued (MM/DD/YYYY format): Item 10. * Equipment Class: PCE Licensed transmitter * Description of Product as it is Marketed: Tri-Band GSM phone - Models: TSM2, A109 Item 11. * Application is for: (please mark as appropriate) X Original Equipment (See instructions) Ο Change in identification of presently authorized equipment: Original FCC ID: Grant Date (MM/DD/YYYY format): Ο Class II permissive change or modification of presently authorized equipment (See instructions) (NOTE: This text will appear below the equipment class on the grant) DOC-FCC009 4/14/2005 Page 2 of 3 Item 12. Is the equipment in this application: * (a) a composite device subject to an additional equipment authorization? * (b) part of a system that operates with, or is marketed with, another device that requires an equipment authorization? If either of the above questions is answered "Yes" complete section 12(c). Ο Yes X No Ο Yes X No (c) The related application: Ο has been granted under the FCC ID listed to the right Ο is in the process of being filed under the FCC ID listed to the right Ο is pending with the FCC under the FCC ID listed to the right FCC ID Item 13. Name of test firm and contact person on file with the FCC, if different from applicant or contact person: Firm Name: Centro de Tecnologia de las Comunicaciones S.A. Last Name: Telephone +34952619100 Ext Fax No. +3495261913 E-mail: [email protected] Item 14. Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization. Read each certification carefully before answering and signing this application Equipment Specifications: Rule Part Frequency Range (MHz) Power (W) Frequency Tolerance and Units Emission Designator Note Codes 22H 824.2 - 848.8 2.95 1.0 PM 300KGXW 24E 1850.2 - 1909.8 0.54 1.0 PM 300KGXW WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTITUTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503). Item 15. *SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION: The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? X Yes Ο No Item 16. APPLICANT/AGENT CERTIFICATION: I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. IN accepting a Grant of Equipment Authorization issued by the FCC as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond t…

Text truncated - open the document above for the full version.

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 June 30, 2006 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Vitelcom Mobile Technology S.A. requests confidentiality for the following products: FCC ID Number Product Title/Model TKH-A109-TSM2 Tri-Band GSM phone / Models: TSM2, A109 For the product stated above, we request that the following information be held confidential: 1) Circuit diagrams 2) Block Diagrams 3) Bill of materials 4) Operational Description 5) Tune up information No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Vitelcom Mobile Technology S.A. trade secrets and proprietary information that could be of benefit to our competitors. This material is not customarily available to the general public and we request that it be withheld from public inspection. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Rafael Abad Cano P.A. Date: June 30, 2006 Place: Campanillas-Málaga Signature and company stamp

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 June 30, 2006 RE: TKH-A109-TSM2 label location TO WHOM IT MAY CONCERN Identification label of the equipment TKH-A109-TSM2 is located in the battery compartment: Per Sec. 2.925 (Identification of the equipment): ... (d) In order to validate the grant of equipment authorization, the nameplate or label shall be permanently affixed to the equipment and shall be readily visible to the purchaser at the time of purchase. (1) As used here, permanently affixed means that the required nameplate data is etched, engraved, stamped, indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment enclosure. Alternatively, the required information may be permanently marked on a nameplate of metal, plastic, or other material fastened to the equipment enclosure by welding, riveting, etc., or with a permanent adhesive. Such a nameplate must be able to last the expected lifetime of the equipment in the environment in which the equipment will be operated and must not be readily detachable. (2) As used here, readily visible means that the nameplate or nameplate data must be visible from the outside of the equipment enclosure. It is preferable that it be visible at all times during normal installation or use, but this is not a prerequisite for grant of equipment authorization. ... The equipment TKH-A109-TSM2 will be marketed with the battery removed, not mounted together with the equipment, the customer will need to place the battery on the battery compartment. So at the time of purchase the customer will clearly see and read the identification label. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: Rafael Abad Cano P.A. Date: June 3 0, 2006 Place: Campanillas-Málaga Signature and Company stamp

This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2006/40005 Page : 1 of 49 TEST REPORT Equipment Under Test : 850/1900 DUAL BAND GSM PHONES Model No. : TSM2 FCC ID : TKH-A109-TSM2 Applicant : VITELCOM MOBILE TECHNOLOGY, S.A. Address of Applicant : Parque Tecnologico de Andalucia Av. Juan López Peñalver 7, Malaga, Spain Date of Receipt : 2006.03.24 Date of Test(s) : 2006.03.29-2006.03.30 Date of Issue : 2006.06.15 Standards: FCC OET Bulletin 65 supplement C, ANSI/IEEE C95.1 , C95.3, IEEE 1528 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan E&E Services or testing done by SGS Taiwan E&E Services in connection with distribution or use of the product described in this report must be approved by SGS Taiwan E&E Services in writing. Tested by : Leo Date : 2006.06.15 Approved by : Robert Date : 2006.06.15 This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2006/40005 Page : 2 of 49 Contents 1. General Information 1.1 Testing Laboratory 4 1.2 Details of Applicant 4 1.3 Description of EUT 4 1.4 Test Environment 5 1.5 Operation description 5 1.6 The SAR Measurement System 5 1.7 System Components 7 1.8 SAR System Verification 8 1.9 Tissue Simulant Fluid for the Frequency Band 9 1.10 Test Standards and Limits 10 2. Summary of Results 13 3. Instruments List 15 4. Measurements 16 GSM 850MHz 4.1.1 Right-head, cheek, lowest channel 16 4.1.2 Right-head, cheek, middle channel 17 4.1.3 Right-head, cheek, highest channel 18 4.1.4 Left-head, cheek, lowest channel 19 4.1.5 Left-head, cheek, middle channel 20 4.1.6 Left-head, cheek, highest channel 21 4.1.7 Right-head, tilt 15°, lowest channel 22 4.1.8 Right-head, tilt 15°, middle channel 23 4.1.9 Right-head, tilt 15°, highest channel 24 4.1.10 Left-head, tilt 15°, lowest channel 25 4.1.11 Left-head, tilt 15°, middle channel 26 4. 1.12 Left-head, tilt 15°, highest channel 27 4.1.13 Body, lowest channel 28 4.1.14 Body, middle channel 29 4.1.15 Body, highest channel 30 PCS 1900MHz 4.2.1 Right-head, cheek, lowest channel 31 4.2.2 Right-head, cheek, middle channel 32 4.2.3 Right-head, cheek, highest channel 33 4.2.4 Left-head, cheek, lowest channel 34 4.2.5 Left-head, cheek, middle channel 35 4.2.6 Left-head, cheek, highest channel 36 4.2.7 Right-head, tilt 15°, lowest channel 37 4.2.8 Right-head, tilt 15°, middle channel 38 4.2.9 Right-head, tilt 15°, highest channel 39 This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2006/40005 Page : 3 of 49 4.2.10 Left-head, tilt 15°, lowest channel 40 4.2.11 Left-head, tilt 15°, middle channel 41 4.2.12 Left-head, tilt 15°, highest channel 42 4.2.13 Body, lowest channel 43 4.2.14 Body, middle channel 44 4.2.15 B…

Text truncated - open the document above for the full version.

This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2006/40005 Page : 1 of 21 Contents APPENDIX 1. Photographs of Test Setup 02 2. Photographs of EUT 05 3. Photographs of the Battery 07 4. Probe Calibration certificate 08 5. Uncertainty Analysis 16 6. Phantom description 17 7. System Validation from Original equipment supplier 18 This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2006/40005 Page : 2 of 21 Appendix Photographs of Test Setup Fig.1 Photograph of the SAR measurement System Fig.2.1 Photograph of the Tissue Simulant Fluid liquid depth 15cm for Left-head Side Fig.2.2 Photograph of the Tissue Simulant Fluid liquid depth 15cm for Right-head Side 15 cm 900MHz 15 cm 1900MHz This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2006/40005 Page : 3 of 21 Fig.2-3 Photograph of the Tissue Simulant Fluid liquid depth 15cm for Flat (Body) Fig.2-4 Photograph of the Tissue Simulant Fluid liquid depth 15cm for Flat (Body) Fig.3 Right Head Section / Cheek-Touch Position Fig.4 Right Head Section / Ear-Tilt Position(15°) 15° Tilt Touch 15 cm 1900MHz 15 cm 900MHz This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2006/40005 Page : 4 of 21 Fig.5 Left Head Section / Cheek-Touch Position Fig.6 Left Head Section / Ear-Tilt Position(15°) Fig.7 Body Section 15° Tilt Touch 1.5cm This document is issued by the Company subject to its General Conditions of Service which is available on request or accessible atwww.sgs.com. Attention is drawnto the limitations of liability, indemnification and jurisdictional issues defined therein.Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested.This document cannot be reproduced except in full, without priorapproval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.此報告是遵循本公司訂 定之通用服務條款所製作發放，相關服務條款備索，或可在www.sgs.com中查閱，本公司之義務、免責、管轄權皆明確規範其中。除非另有說明，此報告結果僅對檢驗之樣品負責。本報告未經本公司書面許可， 不可部份複製。對本報告內容或外觀之任何未經授權之變更、偽造、竄改皆屬非法，違犯者將會被依法追訴。 SGS Taiwan Ltd.No.134, WuKungRoad, Wuku Industrial Zone, Taipei County, Taiwan248/台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司t (886- 2) 2299–3279f (886-2) 2298–0488www.tw.sgs.com Member of SGS Group Report No. : ES/2006/40005 Page : 5 of 21 Photographs of the EUT Fig.8 Front v…

Text truncated - open the document above for the full version.

Report No.: 22656RET Date: 2005-08-02 Page: 2 of 9 FDT08_04 INDEX 1. COMPETENCE …

Text truncated - open the document above for the full version.