TLZ-HM610IEEE 802.11ah Wireless LAN Module

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 29, 2024 FCC ID: TLZ-HM610 RE: Attestation Statements Part 2.911(d)(5)(i) Filing AzureWave Technologies, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. RE: Attestation Statements Part 2.911(d)(5)(ii) Filing AzureWave Technologies, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Applicant : AzureWave Technologies, Inc. Address : 8F., No. 94, Baozhong Rd., Xindian Dist., New Taipei City 23144, Taiwan Signature : _________________________________ Name and Job Title. : Patrick Lin, Director E-mail : [email protected] Tel. : 02-55995599

Confidentiality Request Letter Date: July 29, 2024 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: TLZ-HM610 To whom it may concern: Short-term Confidentiality pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 90 days after the grant date. 1. Internal Photographs 2. External Photographs 3. User’s manual 4. Test Set up photos Permanent Confidentiality Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. 1. Block Diagram 2. Schematics 3. Operational Description It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant : AzureWave Technologies, Inc. Address : 8F., No. 94, Baozhong Rd., Xindian Dist., New Taipei City 23144, Taiwan Signature : _________________________________ Name and Job Title. : Patrick Lin, Director E-mail : [email protected] Tel. : 02-55995599

Letter of Authorization Date: July 29, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: TLZ-HM610 Product Name: IEEE 802.11ah Wireless LAN Module To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name : Leo Huang Job Title : VP e-mail : [email protected] We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : AzureWave Technologies, Inc. Address : 8F., No. 94, Baozhong Rd., Xindian Dist., New Taipei City 23144, Taiwan Signature : _________________________________ Name and Job Title. : Patrick Lin, Director E-mail : [email protected] Tel. : 02-55995599

Modular Approval Request Letter Date: July 29, 2024 Subject: Modular Approval Attestation FCC ID: TLZ-HM610 Dear Reviewer, We, AzureWave Technologies, Inc., would request IEEE 802.11ah Wireless LAN Module approved under single module approval authorization. The requirements regulated in 47 CFR 15.212 have been fulfilled and clearly explained below. Modular Checklist/Information Yes/No (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Yes The shielding of the radio portion can be demonstrated in exhibition External Photo. (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. Yes Buffered data inputs stage has been integrated in chip NRC7394. (iii) The modular transmitter must have its own power supply regulation. Yes The part number of the power regulator is NRC7394. (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Yes The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in § 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see § 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see § 15.31(i)). Yes Please reference exhibition Test Configuration Photo for the stand-alone test configuration. (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. Yes The instruction on the labeling rule of the end product has been stated in the user manual of this module. Please also see the exhibition Label Sample. (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Yes The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the Users Manual. (viii) Radio frequency devices operating under the provisions of this part are subject to the radio frequency radiation exposure requirements specified in §§ 1.1307(b), 1.1310, 2.1091, and 2.1093 of this chapter, as appropriate. Applications for equipment authorization of modular transmitters under this section must contain a statement confirming compliance with these requirements. The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Technical information showing the basis for this statement must be submitted to the Commission upon request. Yes Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Please do not hesitate to contact me for any questions of this request letter. Thank you. Applicant : AzureWave Technologies, Inc. Address : 8F., No. 94, Baozhong Rd., Xindian Dist., New Taipei City 23144, Taiwan Signature : _________________________________ Name and Job Title. : Patrick Lin, Director E-mail : [email protected] Tel. : 02-55995599

Radio Exposure Evaluation Report Report No. : FA452705 TEL : 886-3-327-3456 Page Number : 1 of 10 FAX : 886-3-327-0973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: TLZ-HM610 Radio Exposure Evaluation Report FCC ID : TLZ-HM610 Equipment : IEEE 802.11ah Wireless LAN Module Brand Name : AzureWave Model Name : AW-HM610 Applicant : AzureWave Technologies, Inc. 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Manufacturer : AzureWave Technologies, Inc. 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Standard : 47 CFR FCC Part 2 Subpart J, section 2.1091 The product was received on Jun. 06, 2024, and testing was started from Jul. 17, 2024 and completed on Jul. 17, 2024. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in 47 CFR FCC Part 2 Subpart J, section 2.1091 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai __________________________________________ SDoC by: XXXXX SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) Radio Exposure Evaluation Report Report No. : FA452705 TEL : 886-3-327-3456 Page Number : 2 of 10 FAX : 886-3-327-0973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: TLZ-HM610 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Applicable Standards ............................................................................................................................. 6 1.3 Testing Location ..................................................................................................................................... 6 2 MAXIMUM PERMISSIBLE EXPOSURE ............................................................................................... 7 2.1 Limit of Maximum Permissible Exposure ............................................................................................... 7 2.2 RF Exposure Exempt Measurement ...................................................................................................... 7 2.3 Multiple RF Sources Exposure ............................................................................................................... 8 2.4 MPE Calculation Method ........................................................................................................................ 9 2.5 Calculated Result and Limit .................................................................................................................. 10 Photographs of EUT V01 Radio Exposure Evaluation Report Report No. : FA452705 TEL : 886-3-327-3456 Page Number : 3 of 10 FAX : 886-3-327-0973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: TLZ-HM610 History of this test report Report No. Version Description Issued Date FA452705 01 Initial issue of report Aug. 05, 2024 Radio Exposure Evaluation Report Report No. : FA452705 TEL : 886-3-327-3456 Page Number : 4 of 10 FAX : 886-3-327-0973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: TLZ-HM610 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 2 - Exposure evaluation PASS - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: None Reviewed by: Ben Tseng Report Producer: Julie Tseng Radio Exposure Evaluation Report Report No. : FA452705 TEL : 886-3-327-3456 Page Number : 5 of 10 FAX : 886-3-327-0973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: TLZ-HM610 1 General Description 1.1 Information 1.1.1 EUT General Information RF General Information Evaluation Mode Frequency Range (MHz) Operating Frequency (MHz) Modulation Type SRD 902-928 903.5~926.5 OFDM 1.1.2 Antenna Information Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Cortec AN0915-5001BSM Diople RP-Diople(M) 2 Note 1: The EUT has one antenna. For SRD function: For SRD mode (1TX/1RX) Ant. 1 (port 1) could transmit/receive. Radio Exposure Evaluation Report Report No. : FA452705 TEL : 886-3-327-3456 Page Number : 6 of 10 FAX : 886-3-327-0973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-A1 Ver5.0 Report Version : 01 FCC ID: TLZ-HM610 1.2 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ⬧ 47 CFR FCC Part 2 Subpart J, section 2.1091 ⬧ KDB 447498 D04 Interim General RF Exposure Guidance v01 The following reference test guidance is not within the scope of accreditation of TAF. ⬧ 47 CFR Part 1.1307 ⬧ 47 CFR Part 1.1310 1.3 Testing Location Test Lab.：Sporton International Inc. Hsinhua Laboratory Hsinhua ADD: No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) (TAF: 3785) TEL: 886-3-327-3456 FAX: 886-3-327-0973 Test site Designation No. TW3785 with FCC. Wen 33rd.St. ADD: No.…

Text truncated - open the document above for the full version.

FCC Radio Test Report Report No. : FR452705AF TEL : 886-3-3273456 Page No. : 1 of 24 FAX : 886-3-3270973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-C14 Ver4.0 Report Version : 01 FCC ID: TLZ-HM610 FCC Radio Test Report FCC ID : TLZ-HM610 Equipment : IEEE 802.11ah Wireless LAN Module Brand Name : AzureWave Model Name : AW-HM610 Applicant : AzureWave Technologies, Inc. 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Manufacturer : AzureWave Technologies, Inc. 8F., No.94, Baozhong Rd. , Xindian Dist., New Taipei City , Taiwan 231 Standard : 47 CFR FCC Part 15.247 The product was received on Jun. 06, 2024, and testing was started from Jul. 17, 2024 and completed on Jul. 26, 2024. We, SPORTON INTERNATIONAL INC. Hsinhua Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2013 and shown compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Hsinhua Laboratory, the test report shall not be reproduced except in full. ___________________________________________ Approved by: Jackson Tsai SPORTON INTERNATIONAL INC. Hsinhua Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333411, Taiwan (R.O.C.) FCC Radio Test Report Report No. : FR452705AF TEL : 886-3-3273456 Page No. : 2 of 24 FAX : 886-3-3270973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-C14 Ver4.0 Report Version : 01 FCC ID: TLZ-HM610 Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information .............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 7 1.3 Testing Location Information .................................................................................................................. 7 1.4 Measurement Uncertainty ...................................................................................................................... 7 2 TEST CONFIGURATION OF EUT......................................................................................................... 8 2.1 Test Condition ........................................................................................................................................ 8 2.2 Test Channel Mode ................................................................................................................................ 8 2.3 The Worst Case Measurement Configuration ........................................................................................ 9 2.4 Support Equipment ............................................................................................................................... 10 2.5 Test Setup Diagram ............................................................................................................................. 11 3 TRANSMITTER TEST RESULT .......................................................................................................... 12 3.1 AC Power-line Conducted Emissions .................................................................................................. 12 3.2 DTS Bandwidth..................................................................................................................................... 14 3.3 Maximum Conducted Output Power .................................................................................................... 15 3.4 Power Spectral Density ........................................................................................................................ 17 3.5 Emissions in Non-restricted Frequency Bands .................................................................................... 18 3.6 Emissions in Restricted Frequency Bands ........................................................................................... 19 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................ 23 APPENDIX A. TEST RESULTS OF AC POWER-LINE CONDUCTED EMISSIONS APPENDIX B. TEST RESULTS OF DTS BANDWIDTH APPENDIX C. TEST RESULTS OF MAXIMUM CONDUCTED OUTPUT POWER APPENDIX D. TEST RESULTS OF POWER SPECTRAL DENSITY APPENDIX E. TEST RESULTS OF EMISSIONS IN NON-RESTRICTED FREQUENCY BANDS APPENDIX F. TEST RESULTS OF EMISSIONS IN RESTRICTED FREQUENCY BANDS APPENDIX G. TEST PHOTOS PHOTOGRAPHS OF EUT V01 FCC Radio Test Report Report No. : FR452705AF TEL : 886-3-3273456 Page No. : 3 of 24 FAX : 886-3-3270973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-C14 Ver4.0 Report Version : 01 FCC ID: TLZ-HM610 History of this test report Report No. Version Description Issued Date FR452705AF 01 Initial issue of report Aug. 05, 2024 FCC Radio Test Report Report No. : FR452705AF TEL : 886-3-3273456 Page No. : 4 of 24 FAX : 886-3-3270973 Issued Date : Aug. 05, 2024 Report Template No.: HE1-C14 Ver4.0 Report Version : 01 FCC ID: TLZ-HM610 Summary of Test Result Report Clause Ref. Std. Clause Test Items Result (PASS/FAIL) Remark 1.1.2 15.203 Antenna Requirement PASS FCC 15.203 3.1 15.207 AC Power-line Conducted Emissions PASS - 3.2 15.247(a) DTS Bandwidth PASS ≥500kHz 3.3 15.247(b) Maximum Conducted Output Power PASS Power [dBm]:30 3…

Text truncated - open the document above for the full version.

Product Number: AN0915-5001BSM Product Name: Antenna Page 1 Specification For Approval Date: 2024 / 05 / 13 File No.: 240513003 Version: 1.0 Customer： 海華科技 Customer P/N： / INVAX P/N： AN0915-5001BSM Description : Dipole Antenna Cortec Checked By: Customer Approved By: INVAX System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.5 Xian-Xi Industrial, Sha-Tou Administration Zone, Taipei, TAIWAN Chang-An Town, Dong-Guan City, Guangdong Province, China TEL:886-2-2788-5218 FAX:886-2-2783-1658 TEL:86-769-85388261 FAX:86-769-85317869 http://www.invaxsystem.comhttp://www.cortec.com.cn Product Number: AN0915-5001BSM Product Name: Antenna Page 2 Index: 1. Revision History / Page 3 2. Sp ecification / Page 4 3. Characteristics and Reliability T est / Page 5 4. Antenna - S Parameter Test Data / Page 6 5. Antenna - Radiation Pattern Test Data / Pa ge 7 ~ 8 6. Mechanical and Packing Drawing / Page 9 ~ 10 7. Material Description and RoHS T est Report / Page 11 ~ en d Product Number: AN0915-5001BSM Product Name: Antenna Page 3 1. Revision History Revision Date Change NotificationDescription 1.0 2024.05.13 初版 Product Number: AN0915-5001BSM Product Name: Antenna Page 4 2. Specification Sample Photo A. Electrical Characteristics Frequency 902 ~ 928 MHz S.W.R.<= 2.0 Peak Gain 2.0 dBi Efficiency90 % PolarizationLinear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator Cu Material of Plastic ABS / TPEE Cable Type RG-178 Connector Type SMA Male C. Environmental Operation Temperature - 40 ̊C ~ + 65 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C Antenna Color Storage life < 2 year Product Number: AN0915-5001BSM Product Name: Antenna Page 5 3. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Antenna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration GB / T2423 . 48-1997 Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Random Drop GB / T2423.8-1995 Height: 1.0 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability GB 2423 . 28- 82 Solder iron: 260±5°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 Terminal- Pull Test Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 Terminal- Torque Test Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray GB / T 2423 . 17- 93 Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity GB / T 2423 . 4 - 93 Temp: 80°C / 12 H; -40°C / 12H RH: >= 90%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock GB / T 2423 . 22 - 87 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) GB /T 2423 . 2 - 89 Temp: 80°C; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2002/95/EC R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC Product Number: AN0915-5001BSM Product Name: Antenna Page 6 4. Antenna - S Parameter Test Data Product Number: AN0915-5001BSM Product Name: Antenna Page 7 5. Antenna - Radiation Pattern Test Data 902 MHz 915 MHz 928 MHz Product Number: AN0915-5001BSM Product Name: Antenna Page 8 2D xy xz yz 6. Mechanical Drawing See attached files 7. Material Description and RoHS Test Report See attached files 填表： 時麗 部門： 研發部 職務： 文員 Cd Pb Hg Cr(VI) PBBs PBDEs DBP BBP DIBP DEHP 1 BODY-AN50-01B Body TPEE N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. A2240057268120001 2024.03.13 TPEE SGS 序號 各構成物料的材質 測試日期 物料型號 物料各構成 名稱 測試報告裡 RoHS 對應物質測試結果 物料中 HSF 對象物質含量調查表 測試機構 名稱 COR/F-G-47a 康捷電子有限公司 物料名稱：AN0915-5001BSM 測試名稱 檢測報告編號 2 AN9201-06B AN0304-T07B Body1 ABS N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. CANPC24004074901 2024.03.14 ABS HP171-NP SGS 3 SMA207-CCT5AN19-A SMA Male 銅 23 29211 N.D. N.D. CANPC23003365002 2023.05.29 Brass rod (C3604) SGS 4 R-AN1901-650R-AN8065-245 Tube 铜 N.D. 23 N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. CANEC23009815201 2023.09.19 A ppy to H65(C2680,C270 0 SGS 5 R-GS-SP3001001 泡棉 EVA N.D. 10 N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. CANEC23017402017 2024.01.03 Environmental SGS 6 FEP N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. NGBPC24000131241 2024.01.16 FLUORINATED ETHYLENE SGS 7 PTFE N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. NGBPC24000131217 2024.01.16 PTFE DISPERSION RESIN SGS 镀银铜 N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. CANEC24002005301 2024.01.31 SC SGS 8 镀锡铜 N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. N.D. A2230496550101001 2023.09.26 TIN PLATING ROUND CTI 根據測試報告如實填寫鉛、鎘、汞、六價鉻、 PBBs 和 PBDEs 六項禁用物質的含量 R-RG-178U-03 包裝材料中鉛、鎘、汞、六價鉻總含量不超過 100ppm ，鎘的允許濃度為 5ppm Cable 歐盟ROHS指令豁免條款2009/95/BC、钢中合金元素中的铅含量达0.35%、铝含量达0.4%、铜合金中的铅含量达4%