UA9100444-2203

SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615‐7700 • Fax: 503 615‐4232 http://www.summitsemi.com Wheeler Model 444‐2203 User Manual 1 Table of Contents 2 User Manual Regulatory Statements ...........................................................................................2 2.1 FCC / IC Identification Numbers............................................................................................2 2.2 FCC/ IC Compliance Statement .............................................................................................2 2.3 FCC Changes Warning ...........................................................................................................2 2.4 FCC / IC Information To The User.........................................................................................2 2.5 FCC Labeling ..........................................................................................................................3 2.6 FCC / IC Antenna usage .........................................................................................................3 2.7 Mobile Exposure....................................................................................................................3 2.8 FCC Modular approval configuration control .......................................................................3 2.9 FCC / IC Indoor Usage............................................................................................................3 2.10 FCC Interim Solution to DFS band interference with Weather Radar...............................4 3 OEM Installation Instructions.......................................................................................................4 3.1 Flex cable interface ...............................................................................................................4 3.2 Mounting hardware ..............................................................................................................4 3.3 Antennas ...............................................................................................................................4 4 OEM Operating Environment.......................................................................................................5 5 OEM Operating Instructions.........................................................................................................5 SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615‐7700 • Fax: 503 615‐4232 http://www.summitsemi.com 2 User Manual Regulatory Statements The United States Federal Communication Commission has established certain rules governing the use of electronic equipment, including the following required guidelines. 2.1 FCC / IC Identification Numbers United States FCC ID UA9100 Industry Canada IC: 9129A‐100 2.2 FCC/ IC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2.3 FCC Changes Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2.4 FCC / IC Information To The User Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615‐7700 • Fax: 503 615‐4232 http://www.summitsemi.com Users should also be cautioned to take note that high-power radars are allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz, 5600-5650 MHz, and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. 2.5 FCC Labeling While the FCC user ID is placed on the master device circuit board, compliant labeling shall also be placed on the end product housing exterior. 2.6 FCC / IC Antenna usage Antennas are required to be permanently attached or of non-standard connection method to prevent the end user from altering the installation’s performance. The installer shall be responsible for ensuring that the proper antenna is employed so that the transmit power limits are not exceeded. Non-approved antennas should not be used. This device has been designed to operate with the antennas listed below. Antennas not included in this list are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. 2.7 Mobile Exposure The user is cautioned to maintain a 20cm (8 inch) spacing from the product to ensure compliance with FCC requirements. 2.8 FCC Modular approval configuration control Control of the end product into which the module will be installed must be maintained such that full compliance of the end product is always ensured. The modular transmitter must comply with any sp…

Text truncated - open the document above for the full version.

SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615-7700 • Fax: 503 615-4232 http://www.summitsemi.com August 17 th , 2010 To whom it may concern, We, the undersigned, hereby authorize Vicki Albertson of Northwest EMC, Inc. to act on our behalf, as our agent, in the following matters related to the FCC approval of our wireless master device, Model No: 444-2203 (FCC ID: UA9100): report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Vicki Albertson within the scope of this authorization shall have the same affect as our own. This authorization shall expire 12 months from original date. Sincerely, James Svoboda Engineering Manager

SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615-7700 • Fax: 503 615-4232 http://www.summitsemi.com Request for Short Term Confidentiality August 20, 2010 Chief, Authorizations Branch Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Re: Summit Semiconductor LLC Certification Application FCC ID: UA9100 To Whom It May Concern: A portion of the data contained in this application is to be considered capable of placing us at a competitive disadvantage if it were to be made public before product release. Note that this submittal is for the modular product which is the raw, internal transmitter device without housing. The following data might be used to the disadvantage of Summit Semiconductor LLC by prematurely extracting design information, bill of materials cost, antenna sources, etc. Per Public Notice DA 04-1705, Summit Semiconductor LLC requests holding the following exhibits confidential short term (180 day allotted period) until the device is introduced to the public for marketing: a. External photos b. Internal photos c. Test setup photos d. User manual Thank you for your attention to this matter. Sincerely, James Svoboda Engineering Manager

SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615-7700 • Fax: 503 615-4232 http://www.summitsemi.com Request for Confidentiality July 27, 2010 Chief, Authorizations Branch Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Re: Summit Semiconductor LLC Certification Application FCC ID: UA9100 To Whom It May Concern: A portion of the data contained in this application is to be considered a trade secret and not to be made routinely available to the public. If such information were to be made public, it might be used to the disadvantage of Summit Semiconductor LLC (the applicant) in the market place. Therefore, pursuant to 47 CFR 0.459 and 47 CFR 0.457(d) of the FCC Rules, we request that the information listed below be withheld from public inspection: a. Wheeler Schematics b. Wheeler Operational Description c. Wheeler Frequency Block Diagram d. KDB Inquiry 437887 Doc 1-3 e. KDB Inquiry 437887 FCC Response f. KDB Inquiry 437887 ITS & NTIA Thank you for your attention to this matter. Sincerely, James Svoboda Engineering Manager

SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615-7700 • Fax: 503 615-4232 http://www.summitsemi.com 15 July 2010 Federal Communications Commission Authorization and Evaluation Branch 7435 Oakland Mills Road Columbia, MD 21046 Dear Application Examiner: Summit Semiconductor LLC has designed and built a digital wireless master device. Summit Semiconductor LLC requests the FCC Equipment and Authorization branch to grant an original certification for our wireless master device, Model No: 444-2203 and FCC ID: UA9100. The 444-2203 Summit Master Module is a turnkey solution that enables customers to start volume production of high performance digital wireless audio source devices. The 444-2203 is designed to be integrated into an audio source device such as AVRs, DVDs, TVs, game platforms, set top boxes, or wireless hubs. It is an IEEE 802.11a compliant radio operating in the UNII band and operates in accordance with the master mode as stated in FCC 06-96 document. This device was tested at NWEMC’s Oregon facility for rule parts 15.247 and 15.407 and at CCS California facility for rule parts 15.407. The device was tested for all the requirements necessary to certify it as a limited modular, DFS capable, 21 channel transmitter. The device is subject to verification and not DoC because it is not a PC peripheral. Please address any corresponding regarding this filing to my attention at the following address. Summit Semiconductor LLC 22867 NW Bennett St., Suite 200 Hillsboro OR 97124 Ph: (503) 615-7734 Sincerely, James Svoboda Engineering Manager

SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615-7700 • Fax: 503 615-4232 http://www.summitsemi.com 15 July 2010 Federal Communications Commission Authorization and Evaluation Branch 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for unlicensed Limited Modular Transmitter Approval. Dear Application Examiner: Summit Semiconductor LLC hereby requests FCC Equipment Authorization and Evaluation branch to approve Summit Semiconductor LLC Model 444-2203, digital wireless audio master device, FCC ID-UA9100, limited modular approval for a 21 channel DFS enabled transmitter. This letter addresses the information required by points one through eight of 47 CFR 15.212. 1. “The modular transmitter must have its own RF shielding .” The transmitter radio section of the module is enclosed within a RF shield. The RF shield is solder mounted to exposed grounding of the circuit board. The point of contact between the shield and the board has multiple ground contacts. The internal photos exhibit has pictures of the wireless master device with and without the shield. The shield suppresses spurious radiations as per FCC requirements. 2. “The modular transmitter must have buffered modulation/data inputs.” The 444-2203 has buffered data inputs that pass through an embedded processor. RF modulation controls are generated on board. Firmware will also not allow the end user to access RF modulation / data rate control settings of the RF circuitry. No change in input data or control signal can affect the RF data rate or type. This method insures compliance with Part 15 requirements under conditions of excessive data rates or over modulation. 3. “The modular transmitter must have its own power supply regulation.” The 444-2203 digital wireless master device receives power from an external +3.3 VDC and external +5.0 VDC supply on the customer’s host controller board. The +3.3 VDC supply sources some circuitry directly and is also regulated to +1.5 and +2.8 VDC as well. The +5.0 VDC suppy sources circuitry directly. In order to comply with the requirement that all voltages be regulated, we have included an over voltage detection circuit which ceases RF transmission when the input voltages exceed their +10% threshold, either independently or together. 4. “The modular transmitter antenna must comply with the antenna and transmission system requirements of section 15.203, and 15.204(c).” The modular device complies with all FCC antenna requirements. The 444-2203 digital wireless master device offers a UFL style RF connector interface. This requires either a permanently attached antenna, or will be offered with a UFL to RP-SMA cable that is a non-standard attachment method. Both methods meet FCC requirements. A list of usable antennas is provided in the antenna report included with the certification submission. 5. “The modular transmitter must be tested in a stand-alone configuration.” As described in the technical report exhibit and the test set up photos of the test report included in the filing for FCC equipment authorization, the 444-2203 digital wireless master device module was tested as a stand alone device. The device is designed with an industry standard 40 pin multi pin flex cable and was tested in typical configuration which is greater than 10 cm in length from the host device. 6. “The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying the FCC identification number.” A FCC ID and model number is labeled on every modular device. FCC ID label and location exhibit has a photograph which shows the exact location of the label. Since the FCC ID number will not be visible when the module is installed inside the host audio source, another label with the same FCC ID will be applied to the exterior of the host/master enclosure. SUMMIT SEMICONDUCTOR LLC 22867 NW Bennett Street, Suite 200 Hillsboro, OR 97124 USA Phone: 503 615-7700 • Fax: 503 615-4232 http://www.summitsemi.com 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT complies with all specific rules such as modulation scheme, modulation type, bandwidth, antenna requirements, power supply regulation, and suppression of spurious emissions and so on. A detailed user manual is provided with every EUT which instructs the user to maintain compliance as per the requirements of the Commission. The manual also cautions the user not to make any changes or modifications not approved by the party responsible for compliance. Please see the operating description exhibit for further details to understand how the EUT complies with specific rules and operating requirements as per FCC. 8. “The modular transmitter must comply with any applicable RF exposure requirements in its final configuration.” The EUT is compliant with all applicable RF exposure requirements and EUT is operated in a manner that ensures the public is not exposed to radio frequency in excess of Federal Communication Commission’s guidelines. Please see the RF exposure exhibit. Best Regards James Svoboda Engineering Manager

EUT P/N: 444-2203 FCC ID: UA9100 IC: 9129A-100

Picture Design Frequency Antenna Gain Gain Method Type Aeon Technology C6276-510001A 2.4, 5.8 GHz 2.2dBi Measured 1/4 wave dipole

Summit Semiconductor LLC Summit FS848 Master Module (Wheeler) Report No. FOCU0081.2 Report Prepared By www.nwemc.com 1-888-EMI-CERT © 2010 Northwest EMC, Inc 22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Last Date of Test: July 27, 2010 Summit Semiconductor LLC Model: Summit FS848 Master Module (Wheeler) Emissions Test Description Specification Test Method Pass/Fail Maximum Permissible Exposure FCC 2.1091:2010 OET Bulletin 65, Supplement C Ed 01-01 Pass Modifications made to the product See the Modifications section of this report Test Facility The measurement facility used to collect the data is located at: Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada (Site filing #2834D-1). Approved By: Dean Ghizzone, President NVLAP Lab Code: 200630-0 This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Northwest EMC Revision History Revision 05/05/03 Revision Number Description Date Page Number 00 None Accreditations and Authorizations FCC Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP Northwest EMC, Inc. is accredited under the United States Department of Commerce, National Institute of Standards and Technology, and National Voluntary Laboratory Accreditation Program for satisfactory compliance with the requirements of ISO/IEC 17025 for Testing Laboratories. The NVLAP accreditation encompasses Electromagnetic Compatibility Testing in accordance with the European Union EMC Directive 2004/108/EC, and ANSI C63.4. Additionally, Northwest EMC is accredited by NVLAP to perform radio testing in accordance with the European Union R&TTE Directive 1999/5/EEC, the requirements of FCC, and the RSS radio standards for Industry Canada. NVLAP LAB CODE 200629-0 NVLAP LAB CODE 200630-0 NVLAP LAB CODE 200676-0 NVLAP LAB CODE 200761-0 NVLAP LAB CODE 200881-0 Industry Canada Accredited by NVLAP for performance of Industry Canada RSS and ICES testing. Our Open Area Test Sites and certification chambers comply with RSS-Gen, Issue 2 and have been filed with Industry Canada and accepted. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by NIST and recognized by Industry Canada as a Certification Body (CB) per the APEC Mutual Recognition Arrangement (MRA). This allows Northwest EMC to certify transmitters to Industry Canada technical requirements. (Site Filing Numbers - Hillsboro: 2834D-1, 2834D-2, Sultan: 2834C-1, Irvine: 2834B-1, 2834B-2, Brooklyn Park: 2834E-1) CAB Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement. NEMKO Assessed and accredited by NEMKO (Norwegian testing and certification body) for European emissions and immunity testing. As a result of NEMKO's laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification (Authorization No. ELA 119). Accreditations and Authorizations Australia/New Zealand The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body (NVLAP). VCCI Accepted as an Associate Member to the VCCI, Acceptance No. 564. Conducted and radiated measurement facilities have been registered in accordance with Regulations for Voluntary Control Measures, Article 8. (Registration Numbers. - Hillsboro: C-1071, R-1025, G-84, C-2687, T-1658, and R-2318, Irvine: R-1943, G-85, C- 2766, and T-1659, Sultan: R-871, G-83, C-1784, and T-1511, Brooklyn Park: R-3125, G-86, G-141, C-3464, and T-1634). BSMI Northwest EMC has been designated by NIST and validated by C-Taipei (BSMI) as a CAB to conduct tests as described in the APEC Mutual Recognition Agreement (US0017). License No.SL2-IN-E-1017. GOST Northwest EMC, Inc. has been assessed and accredited by the Russian Certification bodies Certinform VNIINMASH, CERTINFO, SAMTES, and Federal CHEC, to perform EMC and Hygienic testing for Information Technology Products. As a result of their laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification KCC Northwest EMC, Inc is a CAB designated b…

Text truncated - open the document above for the full version.

Summit Semiconductor LLC Summit FS848 Master Module (Wheeler) Report No. FOCU0081 Report Prepared By www.nwemc.com 1-888-EMI-CERT © 2010 Northwest EMC, Inc 22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Last Date of Test: July 27, 2010 Summit Semiconductor LLC Model: Summit FS848 Master Module (Wheeler) Emissions Test Description Specification Test Method Pass/Fail Occupied Bandwidth FCC 15.247:2010 ANSI C63.10:2009 Pass Output Power – Channel Power FCC 15.247:2010 ANSI C63.10:2009 Pass Band Edge Compliance FCC 15.247:2010 ANSI C63.10:2009 Pass Spurious Conducted Emissions FCC 15.247:2010 ANSI C63.10:2009 Pass Power Spectral Density FCC 15.247:2010 ANSI C63.10:2009 Pass Spurious Radiated Emissions FCC 15.247:2010 ANSI C63.10:2009 Pass AC Powerline Conducted Emissions FCC 15.247:2010 ANSI C63.10:2009 Pass Modifications made to the product See the Modifications section of this report Test Facility The measurement facility used to collect the data is located at: Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada (Site filing #2834D-1). Approved By: Don Facteau, IS Manager NVLAP Lab Code: 200630-0 This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Northwest EMC Revision History Revision 06/29/09 Barometric Pressure The recorded barometric pressure has been normalized to sea level. Revision Number Description Date Page Number 00 None Accreditations and Authorizations FCC Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP Northwest EMC, Inc. is accredited under the United States Department of Commerce, National Institute of Standards and Technology, and National Voluntary Laboratory Accreditation Program for satisfactory compliance with the requirements of ISO/IEC 17025 for Testing Laboratories. The NVLAP accreditation encompasses Electromagnetic Compatibility Testing in accordance with the European Union EMC Directive 2004/108/EC, and ANSI C63.4. Additionally, Northwest EMC is accredited by NVLAP to perform radio testing in accordance with the European Union R&TTE Directive 1999/5/EEC, the requirements of FCC, and the RSS radio standards for Industry Canada. NVLAP LAB CODE 200629-0 NVLAP LAB CODE 200630-0 NVLAP LAB CODE 200676-0 NVLAP LAB CODE 200761-0 NVLAP LAB CODE 200881-0 Industry Canada Accredited by NVLAP for performance of Industry Canada RSS and ICES testing. Our Open Area Test Sites and certification chambers comply with RSS-Gen, Issue 2 and have been filed with Industry Canada and accepted. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by NIST and recognized by Industry Canada as a Certification Body (CB) per the APEC Mutual Recognition Arrangement (MRA). This allows Northwest EMC to certify transmitters to Industry Canada technical requirements. (Site Filing Numbers - Hillsboro: 2834D-1, 2834D-2, Sultan: 2834C-1, Irvine: 2834B-1, 2834B-2, Brooklyn Park: 2834E-1) CAB Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement. NEMKO Assessed and accredited by NEMKO (Norwegian testing and certification body) for European emissions and immunity testing. As a result of NEMKO's laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification (Authorization No. ELA 119). Accreditations and Authorizations Australia/New Zealand The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body (NVLAP). VCCI Accepted as an Associate Member to the VCCI, Acceptance No. 564. Conducted and radiated measurement facilities have been registered in accordance with Regulations for Voluntary Control Measures, Article 8. (Registration Numbers. - Hillsboro: C-1071, R-1025, G-84, C-2687, T-1658, and R-2318, Irvine: R-1943, G-85, C- 2766, and T-1659, Sultan: R-871, G-83, C-1784, and T-1511, Brooklyn Park: R-3125, G-86, G-141, C-3464, and T-1634). BSMI Northwest EMC has been designated by NIST and validated by C-Taipei (BSMI) as a CAB to conduct tests as described in the APEC Mutual Recogniti…

Text truncated - open the document above for the full version.

REPORT NO: 10U13247-1 DATE: AUGUST 14, 2010 FCC ID: UA9100 IC: 9129A-100 Page 122 of 125 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. 6. SETUP PHOTOS DYNAMIC FREQUENCY SELECTION MEASUREMENT SETUP MASTER: DFS FRONT PHOTO REPORT NO: 10U13247-1 DATE: AUGUST 14, 2010 FCC ID: UA9100 IC: 9129A-100 Page 123 of 125 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. DFS BACK PHOTO REPORT NO: 10U13247-1 DATE: AUGUST 14, 2010 FCC ID: UA9100 IC: 9129A-100 Page 124 of 125 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. SLAVE: DFS FRONT PHOTO REPORT NO: 10U13247-1 DATE: AUGUST 14, 2010 FCC ID: UA9100 IC: 9129A-100 Page 125 of 125 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4701C 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. END OF REPORT DFS BACK PHOTO

NORTHWEST EMC EMISSION BANDWIDTH XMit 2010.01.14 NORTHWEST EMC PEAK POWER SPECTRAL DENSITY XMit 2010.01.14 NORTHWEST EMC PEAK EXCURSION XMit 2010.01.14 NORTHWEST EMC PEAK TRANSMIT POWER XMit 2010.01.14 NORTHWEST EMC FREQUENCY STABILITY XMit 2010.01.14 NORTHWEST EMC FREQUENCY STABILITY XMit 2010.01.14 NORTHWES…

Text truncated - open the document above for the full version.