UH5M11-1656GPSGPS Watch with 2.4G HRM; GPS Watch

National Electronics & Watch Co,. Ltd. BC10 M11-1656D GPS watch Instruction Manual Ref: UI-11-1656D-006 Introduction Thank you for purchasing the GPS watch. This GPS watch is packed with personal Training features like speed, trip time, laps, etc. GPS can display your current location in an electronic map. Watch features include 12/24H Time format, Chronograph, World time, 5 daily Alarms, 6 Interval Timers, Run, Run Data and HRM modes. This watch can communicate with a PC to store and review your performance. This watch uses a rechargeable battery that can be charged through USB port of your PC. It also uses HRM belt with 2.4 GHz technology to monitor your heart rate for all your HR related information. Caring for your GPS watch: Clean your GPS watch and heart rate monitor with a dampened cloth preferably with mild detergent solution. Wipe dry using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic components. Do not store your GPS watch to prolonged exposure to extreme temperatures as this may result to permanent damage to your unit. About GPS: Global Positioning System (GPS) is a satellite- based navigation system made up of a network of 24 or more satellites. GPS works best in clear weather condition, anywhere in the world, 24 hours a day. Tall buildings may interfere with GPS accuracy. When 3 satellite signals are received, the watch will have 2D GPS fixed (Latitude and Longitude). When 4 or more satellite signals are received, the watch will have 3D GPS Fixed. Water immersion: This GPS watch is designed to be water resistant up to 3 ATM. It can resist water pressure up to 30 meters. After submersion to water, please make sure to wipe dry and air dry the unit before using or charging. Caution : This unit is not intended to be used while swimming. Prolonged water submersion may cause electronic shorting in the unit which may cause minor skin burn or irritation. Getting Started Step 1) Know your watch: Push button location: Push button Function: S1 – Start / Lap / + S3 – View / OK S5 – Stop / Save / - S7 – Mode / Exit S9 – GPS S11 – Light Note: Actual color of the watch and artwork may vary from style to style. National Electronics & Watch Co,. Ltd. BC10 Step 2) Charging the Battery: Charge the unit for about 4.5 hours before first use. The length of time for a fully charged battery will last depending on the actual usage. It is recommended to regularly re-charge your battery every 1-2 months even if it is not used to maintain good battery condition. 2.1) Plug your USB PC link cable to your PC 2.2) Align the charging clip with the contacts on the back of the watch. 2.3) Connect the charging clip securely to the watch. Note: Please thoroughly dry the charging contacts and surrounding area to ensure proper electrical contact and prevent corrosion. When the battery is low, it is time to charge the GPS watch. The possible screen when you charge your watch. Once the battery is full, it will display CHARGE 100% FULL. Battery low condition: You cannot turn ON the GPS when the battery is low. The watch will display BATT LOW. The battery icon will blink. You need to recharge the battery in order to use the GPS again. When the battery is almost low and you still perform your exercise, your data may not be saved if the battery becomes low. Please make sure the battery have enough battery power before doing your exercise in order not to lose your data. When the battery level becomes very low, the watch will automatically turn OFF the display (blank-screen). National Electronics & Watch Co,. Ltd. BC10 Step 3) Acquire Satellite signals: To get the correct time of day and begin using your GPS watch, you have to acquire GPS signals. It may take few minutes to acquire the satellite signals. 3.1) Go outside to an open area away from tall buildings and trees. Orient the GPS antenna towards the sky for best reception. The antenna is located at the 6 o’clock position of the watch. Note: In order to accurately navigate the GPS, you need to have a good line of sight to the satellites. 3.2) Stand still and do not begin moving while performing the following steps until the GPS signals are already received. 3.3) How to Turn-ON the GPS: Press S9 to turn ON the GPS. The watch will start locating the satellites. After re ceiving the satellite si gnals, it will automatically go to RUN mode and the watch will display “GPS GO” while the “CHRONO” blinks. 3.4) How to turn OFF the GPS : If you wish to turn OFF the GPS, press and hold S9 for about 3 seconds in any mode and the watch will momentarily display GPS OFF and then return to Time view. Note: When GPS is ON and CHRONO is running or stop, User cannot turn OFF GPS. GPS signals and its meaning: You will hear a beep sound when the watch has received a GPS signal or when the GPS signal has been lost. LOST GPS signal will also be displayed in the screen. If no Satellite signal is received within 15 minutes, the watch will auto return to Time mode. Step 4) Pair your Heart Rate monitor: The HRM belt is on standby and ready to send data to your watch. Wear the belt directly on your skin just below your breastplate. It should be snug enough to stay in place during your run. 4.1) Push one tab on the strap through the slot in the HRM transmitter. 4.2) Wet both electrodes with a damp cloth on the back of the HRM belt. This will help create a strong electrical connection between your chest and the HRM transmitter. 4.3) Wrap around the chest belt around your rib cage just below the pectoral muscles and attach the other end of the strap to the HRM transmitter. The elastic strap should be adjusted so that it is snug enough so that it will not move during use but not so tight as to restrict breathing. National Electronics & Watch Co,. Ltd. BC10 4.4) Bring the GPS watch within range of the HRM transmitter (3 meters). The watch will auto detect the HR belt. The watch will then automatically go to RUN mode. Your Heart rate information will now be displaye…

Text truncated - open the document above for the full version.

National Electronics & Watch Co. Ltd. 2012-02-17 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Global United Technology Services Co., Ltd. 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District Shenzhen Guangdong ; to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with National Electronics & Watch Co. Ltd. 15/F., SHING DAO IND. BLDG., 232 ABERDEEN MAIN ROAD, ABERDEEN, HONG KONG. Dated this 2012-02-17 Agency agreement expiration date: 2013-02-17 By: Alfred Ma Signature Printed Title: General Manager On behalf of : National Electronics & Watch Co. Ltd. Telephone: 0755-27738810

National Electronics & Watch Co. Ltd. 2012-02-17 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:UH5M11-1656GPS Product Name: GPS Watch with 2.4G HRM; GPS Watch Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2012-02-17 By: Alfred Ma Signature Printed Title: General Manager On behalf of : National Electronics & Watch Co. Ltd. Telephone: 0755-27738810

Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 16 of 26 9 EUT Constructional Details Model: M11-1656D Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 17 of 26 Model: M11-1656D Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 18 of 26 Model: M11-1656D Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 19 of 26 Model: M11-1533D Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 20 of 26 Model: M11-1533D

Label Size: 20mm x 15mm

Label Location Label Location

Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 21 of 26 Model: M11-1656D Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 22 of 26 Model: M11-1656D Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 23 of 26 Model: M11-1656D Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 24 of 26 Model: M11-1656D Accessories : Model no.: M10-635S Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 25 of 26 Accessories : Model no.: M09-381 Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 26 of 26 ------end------ Accessories : Model no.: M09-381

Global United Technology Services Co., Ltd. Report No: CCIS12020001201 Authorized Signature: Stephen Guo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover Page FCC REPORT Applicant: NATIONAL ELECTRONICS & WATCH CO. LTD Address of Applicant: 15/F., SHING DAO IND. BLDG., 232 ABERDEEN MAIN ROAD, ABERDEEN, HONG KONG. Equipment Under Test (EUT) Product Name: Model No.: GPS Watch with 2.4G HRM; M11-1656D Product Name: Model No.: GPS Watch; M11-1533D FCC ID: UH5M11-1656GPS Applicable standards: FCC CFR Title 47 Part 15 Subpart B: 2010 Date of sample receipt: Feb. 16, 2012 Date of Test: Feb. 17, 2012 Date of report issued: Feb. 17, 2012 Test Result : Pass * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 26 2 Version Version No. Date Description 00 Feb. 17, 2012 Original Prepared by: Date: Feb. 17, 2012 Project Engineer Reviewed by: Date: Feb. 17, 2012 Reviewer Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 26 3 Contents Page 1 COVER PAGE ......................................................................................................................................................... 1 2 VERSION .................................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................................. 3 4 TEST SUMMARY .................................................................................................................................................... 4 5 GENERAL INFORMATION ................................................................................................................................... 5 5.1 CLIENT INFORMATION ....................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................. 5 5.3 OPERATING MODES .......................................................................................................................................... 5 5.4 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 6 5.5 DEVIATION FROM STANDARDS .......................................................................................................................... 6 5.6 ABNORMALITIES FROM STANDARD CONDITIONS .............................................................................................. 6 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .................................................................................. 6 5.8 TEST FACILITY ................................................................................................................................................... 6 5.9 TEST LOCATION ................................................................................................................................................ 6 6 TEST INSTRUMENTS LIST .................................................................................................................................. 7 7 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 7.1 CONDUCTED EMISSIONS ................................................................................................................................... 8 7.2 RADIATED EMISSION ....................................................................................................................................... 11 8 TEST SETUP PHOTO .......................................................................................................................................... 15 9 EUT CONSTRUCTIONAL DETAILS ............................................................................................................ 16-26 Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, La…

Text truncated - open the document above for the full version.

Report No: CCIS12020001201 Global United Technology Services Co., Ltd. Project No.: CCIS120200012RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 15 of 26 8 Test Setup Photo Conducted Emission Radiated Emission