UOU69126OP27DS-01Aastra Phone 142 US

Aastra Phone 142 USQuick Guide 1 U sing Your Telephone Important Safety Information C ommunications Regulation Information FCC Notices (U.S. Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-tions: (1) This device may not cause harmful interference, and (2) this device must accept any inter-ference received, including interference that may cause undesired operation.Modifications not expressly approved by this company could void the user's authority to operate theequipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-tion against harmful interference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Health and Safety InformationExposure to Radio Frequency (RF) Signals:The wireless phone is a radio transmitter and receiver. It is designed and manufactured not toexceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communi-cations Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelinesand establish permitted levels of RF energy for the general population. The guidelines are based onthe safety standards previously set by both U.S. and international standards bodies. These standardsinclude a substantial safety margin designed to assure the safety of all persons, regardless of ageand health.This device and its antenna must not be co-located or operating in conjunction with any otherantenna or transmitter.This EUT has been shown to be capable of compliance for localized specific absorption rate (SAR) foruncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OETBulletin 65 Supplement C (2001) and IEEE 1528-2003. Thank you for choosing this Aastra telephone. It’s a high-quality product with a superior design.This Quick Guide will help you using your Aastra Phone 142. The complete User Guide is available onour website www.aastra.com and provide answers to all your most important questions. If you should require any further technical support or information about other Aastra products,please first contact the person responsible for your system or get in touch with your local retailer. You can also find information about this phone and other products on our website: www.aastratelecom.com We hope you enjoy using your Aastra Phone 142.Aastra will not accept liability for any damages and/or long distance charges, which result fromunauthorized and/or unlawful use.While every effort has been made to ensure accuracy, Aastra will not be liable for technical or editor-ial errors or omissions contained within this documentation. The information contained in this doc-umentation is subject to change without notice. W elcome to Aastra 3 2 Using Your Telephone• Sources of heat, direct sunlight or unventilated areas. • Devices that generate strong magnetic fields, electrical appliances, fluorescent lamps, computers,radios, televisions, fax machines or telephones. • Areas where the equipment can be covered, its ventilation impaired or liquid can get inside. • Areas where there is excessive dust and areas subject to vibration, shock or extreme temperaturefluctuations. Please note the following when setting up, connecting, and using your telephone:• Lay the cables where they cannot be walked on or tripped over, causing injury. • Connect the cables to the appropriate sockets only. • Only connect authorized accessories. • Only use the plug-in adapter supplied (ID No.: 4516880). • Scientific research has shown that in certain cases, medical equipment can be influenced by oper-ational DECT telephones. You should therefore adhere to any regulations applicable in medicalinstitutions regarding the operation of cordless telephones. • Never- open the charger cradle or handset yourself (except for the battery compartment cover)- touch the contacts with sharp or metallic objects- carry the charger cradle by its connector cables. • Only use a slightly damp cloth to clean your telephone. • Do not operate your telephone in areas where there is any risk of an explosion. Keep the handset and accessories out of reach of small children. Note for the users of hearing aidsBefore using the handset, users of hearing aids should note that such aids can receive radio signals,which, if powerful enough, may cause an unpleasant hum. Overview and Basic Information General Information The Aastra Phone 142 is a telecommunications device that you can operate on a communicationssystem specified as compatible with an OpenMobilityManagement system (OMM).The newly designed menus enable easy handling and fast access to the many functions and fea-tures provided by your system.Make yourself familiar with your telephone equipment. You’ll discover many new functions thatmake communication and organization easier. Using Your TelephoneIndustry Canada (Canada only)Operation of this device is subject to the following two conditions: (1) this device may not causeinterference, and (2) …

Text truncated - open the document above for the full version.

ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 1 of 13 Appendix A. Pictures ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 2 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 3 of 13

ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 4 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 5 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 6 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 7 of 13

ETS PRODUCT SERVICE AG TEST - REPORT FCC PART 15 D for Isochronous UPCS devices RSS-213 for LE-PCS devices FCC ID: UOU69126OP27DS-01 IC ID: 1884E-69126000 Test report no.: G0M20605-0454-C-1 Certificate 1983.01 ETS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN PRODUCT SERVICE AG PHONE +49-33631-888 00 FAX +49-33631-888 66 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 2 of 54 TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Application details 1.5 Test item 1.6 Test standards 2 TECHNICAL TEST 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 Examinations and Test Procedures 3 RESULTS OF EXAMINATIONS AND TESTS 3.1. Examinations and Test Procedures 3.1.1 Coordination with fixed microwave service, FCC 15.307 (b) 3.1.2 Reference to Subpart B, FCC 15.309 (b) 3.1.3 Conducted limits AC Power line, FCC 15.315, 15.207; RSS-213 4.2; 6.3 3.1.4 Antenna requirement, FCC 15.317, 15.203 3.1.5 Modulation techniques, FCC 15.319 (b); RSS-213 6.1 3.1.6 Emission bandwidth, FCC 15.323 (a); FCC 15.31 (e); RSS-213 6.4 3.1.7 Peak Transmit Power, FCC 15.319 (c); RSS-213 4.3.1, 6:5 3.1.8 Power spectral density, FCC 15.319 (d); RSS-213 4.3.1, 6:6 3.1.9 Directional gain of the antenna, FCC 15.319 (e); RSS-213 4.1 (e) 3.1.10 Automatic discontinuation of transmission, FCC 15.319 (f); RSS-213 4.3.4 (a) ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 3 of 54 3.1.11 Radio frequency radiation exposure, FCC 15.319 (i); RSS-Gen 5.5 3.1.12 Monitoring threshold; Least interfered channel; FCC 15.323 (c)(2); (c)(5) (c)(9); RSS-213 4.3.4 (b)(2) 3.1.13 Monitoring of intended transmit window and maximum reaction time, FCC 15.323 (c)(1); RSS-213 4.3.4 (b)(1) 3.1.14 Monitoring bandwidth, FCC 15.323 (c)(7); RSS-213 4.3.4 (b)(7) 3.1.15 Random waiting interval, FCC 15.323 (c)(6); RSS-213 4.3.4 (b)(6) 3.1.16 Duration of transmission, FCC 15.323 (c)(3); RSS-213 4.3.4 (b)(3) 3.1.17 Connection acknowledgement, Unacknowledged transmissions, FCC 15.323 (c)(4); RSS-213 4.3.4 (b)(5) 3.1.18 Selected channel confirmation, Segment occupancy; FCC 15.323 (c)(5) 3.1.19 Monitoring antenna, FCC 15.323 (c)(8); RSS-213 4.3.4 (b)(8) 3.1.20 Duplex connections, FCC 15.323 (c)(10); RSS-213 4.3.4 (b)(10) 3.1.21 Alternative monitoring interval for co-located devices, FCC 15.323 (c)(11); RSS-213 4.3.4 (b)(11) 3.1.22 Fair access to spectrum related to (c)(10) and (c)(11), FCC 15.323 (c)(12); RSS-213 4.3.4 (b)(12) 3.1.23 Emissions inside and outside the sub-band, FCC 15.323 (d); RSS-213 6.7 3.1.24 Frame period, FCC 323 (e); RSS-213 4.3.(c). 3.1.25 Frequency stability, FCC 323 (f); RSS-213 6.8 3.1.26 Receiver spurious emissions; RSS-213 6.8 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 4 of 54 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has Passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interoperate with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS PRODUCT SERVICE AG. Specific Conditions: Usage of the hereunder tested device in combination with other integrated or external antennas requires at least additional output power measurements, spurious emission measurements, conducted emission measurements (AC supply lines) and radio frequency exposure evaluations for each individual configuration are performed, for certification by competent authorities FCC; IC. This report is related to FCC Part 15 D applied to UPCS devices of which technology is derived from DECT standard. Additional this report covers the requirement of RSS-213, 2 GHz Licence exempt Personal Communications Services Devices (LE-PCS) released by Industry Canada (IC). In following the term UPCS covers the term LE-PCS too. Tester: 15.05.2006 W. Treffke Date ETS-Lab. Name Signature Technical responsibility for area of testing: 15.05.2006 N. Kaspar Date ETS Name Signature ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 5 of 54 1.2 Testing laboratory 1.2.1 Location ETS PRODUCT SERVICE AG Storkower Straße 38c D-15526 Reichenwalde b. Berlin Germany Telefon : +49 33631 888 00 Telefax : +49 33631 888 66= 1.2.2 Details of accreditation status A CCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: DAT-P-201/96 ACCREDITED COMPETENT BODY DAR- REGISTRATION NUMBER: BNetzA-zS-026/96 FCC FILED TEST LABORATORY REG. NO. 96970 Bluetooth Qualification Test Facility (BQTF) Accredited by Bluetooth Qualification Review Board (BQRF) I NDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 A2LA ACCREDITED Certificate Number: 1983.01 1.2.3 Test location, where different from ETS ELECTRONIC TECHNOLOGY SYSTEM DR. GENZ GMBH (ETS) Storkower Straße 38c D-15526 Reichenwalde b. Berlin Germany Telephone : +49 33631 888 00 Telefax : +49 33631 888 66 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 6 of 54 1.3 Details of approval holder Name : DeTeWe Systems GmbH Street : Zeughofstr. 1 Town : 10997 Berlin Country : Germany Telephone : 030/6104 5329 Fax : 030/6104 4521 Contact : Herr Gerhard Hofmann Telephone : 030/6104 5329 E-mail : [email protected] 1.4 Application …

Text truncated - open the document above for the full version.

ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 8 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 9 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 10 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 11 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 12 of 13 ETS Product Service AG Registration number: G0M20605-0454-C-1 Page 13 of 13