UP2AWA24S2.4GHz DSSS Radio Module

UMAWP24S Rev 2v0 Revised March 13, 2007 AW A24S User Manual 2.4GHz DSSS SPI Radio with Integrated Power Amplifier 2.4GHz DSSS SPI Radio with Integrated Power Amplifier AWA24S User Manual Artaflex Inc. UMAWA24S Rev 2v0 215 Konrad Crescent Revised Dec 12, 2007 Markham, Ontario, Canada L3R8T9 Page 2 of 10 http://www.artaflexmodules.com 905-479-0148 Introduction One of the bottlenecks that many product developers encounter in incorporating any radio communication device is facing the legal aspect of qualifying the products and going to market without encountering legal problems. The Telecommunication Certification Body (TCB) authorization process in the United States offers manufacturers more than one approval body. The TCB authorization process certifies devices in accordance with FCC rules and policies. The performance of the Artaflex AWA24S radio is measured according to the requirements of FCC rules. The major applicable FCC regulations are described in Section 15.247 (a) to (d). This document gives an overview of the legal issues governing the manufacture and sale of the Artaflex AWA24S wireless module intended for unlicensed operation in the United States under FCC Part 15, Industry Canada RSS-210 and European Union ETSI EN 300 328-2 (Article 3.2 of R&TTE) and ETSI EN 301 489-1 & ETSI EN 301 489-7. OEMs may need to obtain standard equipment regulatory agency certification and for end product deployment in countries where Modular Approval is not recognized. The details of standard equipment regulatory compliance are beyond the scope of this document. OEMs needing standard equipment regulatory testing or who need council for determining regional requirement should contact approved certification and test service providers accordingly. Artaflex can provide assistance in obtaining regulatory compliance when required by the OEM. 2.4GHz DSSS SPI Radio with Integrated Power Amplifier AWA24S User Manual Artaflex Inc. UMAWA24S Rev 2v0 215 Konrad Crescent Revised Dec 12, 2007 Markham, Ontario, Canada L3R8T9 Page 3 of 10 http://www.artaflexmodules.com 905-479-0148 Table of Content Page 1.0 Eligibility Requirements for Regulatory Module Approval..................................... 4 2.0 User Guide Information.................................................................................... 5 3.0 United States Regulatory FCC Modular Approval (MA).................. ...... .................. 5 3.1 Antenna Regulation................................................................................. 5 3.2 Emissions Compliance Testing................................................................. 6 3.3 Working with Additional Transmitters....................................................... 6 3.4 Product Labeling Requirements................................................................ 7 4.0 Industry Canada Regulatory Approval ................................................................ 7 4.1 Product Labeling Requirements............................................................ .... 8 5.0 European Union Regulatory Approval................................................................. 8 5.1 Product Labeling Requirements............................................................ .... 8 5.2 European Countries Recognizing Modular Approval.................................... 9 6.0 FCC RF Exposure Statement....................................................... .................... 10 2.4GHz DSSS SPI Radio with Integrated Power Amplifier AWA24S User Manual Artaflex Inc. UMAWA24S Rev 2v0 215 Konrad Crescent Revised Dec 12, 2007 Markham, Ontario, Canada L3R8T9 Page 4 of 10 http://www.artaflexmodules.com 905-479-0148 1.0 Eligibility Requirements for Regulatory Module Approval The Artaflex 2.4GHz DSSS SPI Radio with Integrated Print Antenna module (AWA24S) is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2.4GHz unlicensed frequency range. Regional regulatory agency approval may be required to operate AWA24S throughout the world. For purposes of ease of integration, time to market, and product surety, Artaflex submitted the AWA24S to relevant agencies and obtained regulatory approvals for specific countries. The AWA24S was approved under the “Modular Approval (MA) Grant”. This certification represents a significant cost savings to the OEM. The radio certification portion of this grant is transferable to Digital Electronic Device manufacturers given adherence to specific implementation criteria noted herein. Any modification of the AWA24S will void the manufacturer’s warranty. Any alteration or deviation from the documented installation and/or use of the AWA24S will void the MA Grant as it applies to the end-product. In the event the Digital Electronic Device manufacturer alters the herein described and approved installation of the AWA24S, the end-product may require a complete recertification testing by the Digital Electronic Device manufacturer. The MA Grant provides that Digital Electronic Device manufacturers, who incorporate the AWA24S as tested and approved, can be relieved from having to perform the Radio Regulatory certification portion of the respective agency certification. While the OEM for a device into which an authorized module is installed is not required to obtain a new authorization for the module, this does not preclude the possibility that some other form of authorization or testing may be required for the device (e.g., a WLAN into which an authorized module is installed must still be authorized as a PC peripheral, subject to the appropriate equipment authorization). The MA Grant is valid only in countries that recognize the MA Grant certification process. Countries currently accepting the MA Grant include; the USA, Canada, and many European countries as noted in Section 5.2 of this document. Terms and conditions of regulatory approval for these countries are also described herein. However, this “grandfathered” radio certi…

Text truncated - open the document above for the full version.

ELECTRONICS MANUFACTURING AND DESIGN Artaflex Inc. TEL: 905.479.0148 215 Konrad Crescent FAX: 905.479.0149 FRM-00002 Rev. 1.0 Markham, ON L3R8T9Canada www.artaflex.com September 12, 2007 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Gentlemen: This is your letter of authorization to accept our appointment of M.Flom Associates, Inc. a consulting and testing laboratory to act as Agent for Artaflex Inc., 215 Konrad Crescent Unit #2, Markham, Ontario, L3R 8T9, to sign applications before the Commission and to make representations to you on our behalf. M.Flom Associates is to receive and exchange data between our company and the Commission. This appointment is affective until otherwise notified by Artaflex Inc. It is our intention to provide the commission with a full disclosure of our product so that its merits can be evaluated. Indeed, we are pleased to provide any further information that the commission might wish to see. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The Applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 USC 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. Thank you for your attention. Please contact Artaflex Inc. if the Commission requires further information. Sincerely, _________________________ Wayne Embree Design Services Manager Artaflex Inc.

ELECTRONICS MANUFACTURING AND DESIGN Artaflex Inc. TEL: 905.479.0148 215 Konrad Crescent FAX: 905.479.0149 FRM-00002 Rev. 1.0 Markham, ON L3R8T9Canada www.artaflex.com Sept 28, 2007 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Confidentiality Request regarding application for certification of FCC ID: UP2AWA24S Dear Examiner: I am writing to avoid the possibility of an inadvertent disclosure of proprietary information. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name PCB film layer drawings 4-PCB Layout for AWA24S.pdf Bill of Material (Parts List) 9-Parts List_BOM FOR AWA24S.pdf Schematics 10- PA Design Schematic for AWA24S.pdf Block Diagram 3-Block Diagram for AWA24S.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to Artaflex Inc. and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application Thank you for your attention. Please contact Artaflex Inc. if the Commission requires further information. Sincerely, _________________________ Wayne Embree Design Services Manager Artaflex Inc.

ELECTRONICS MANUFACTURING AND DESIGN Artaflex Inc. TEL: 905.479.0148 215 Konrad Crescent FAX: 905.479.0149 1 of 2 Markham, ON L3R8T9Canada www.artaflex.com Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, Maryland 21046 September 12, 2007 Re: Request for Full Modular Approval for Mobile Application / FCC Part15C, Section 15.247 for Digital Transceiver Model AWA24S / FCC ID: UP2AWA24S To whom it may concern: Modular Approval is being requested for this device. The following statements detail these requirements and the manner in which the device meets them. The module has its own complete RF transceiver with built in antenna and reference oscillator. The module meets all of the technical specifications applicable to the frequency band of operation. 1. RF Shielding The module contains metal shield over the transmitter section to ensure that it does not have to rely upon shielding provided by the device into which it is installed and to prevent coupling into which the device will be installed. 2. Buffered Modulation / Data Inputs Data to the modulation circuit is buffered on the module via the WirelessUSB integrated circuit. Refer to the information regarding the on-board Serdes (SPI) provided with the file “Data Sheet DSAWA24S” that details the theory of operation. 3. Power Supply Regulation Power supply regulation is provided within the WirelessUSB integrated circuit that regulates the control voltage to the RF and data circuitry. The maximum allowable voltage that can be used in the chip is 2.4VDC – 3.6VDC. The variable input voltage is therefore a voltage regulator. 4. Antenna Requirements The module uses a mini coaxial connector for adaptation of an external antenna. Two antenna were used (1- 8dBi coaxial dipole Antenna, 2-Blue Nano PCB Antenna) for compliance testing as specifically sighted in the “User Manual UMAWA24S” 5. The modular transmitter must be tested in a stand-alone configuration Test data contained in this application is for the device tested as a stand alone device. Radiated spurious emissions data demonstrating compliance with the requirements of Part 15 of the FCC rules for intentional radiators has been provided. Please refer to the test report for details. ELECTRONICS MANUFACTURING AND DESIGN Artaflex Inc. TEL: 905.479.0148 215 Konrad Crescent FAX: 905.479.0149 2 of 2 Markham, ON L3R8T9Canada www.artaflex.com 6. The modular transmitter must be labeled with its own FCC ID number The module itself is appropriately labeled with its own FCC ID. When the module is installed inside another device or in a casing, the exterior label will make reference to the enclosed module and its FCC ID. Refer to the label location and drawings contained within this application. The UMAWA24S User Manuals contain specific references for exterior end product label requirements, including the use of the wording “Contains Transmitter Module FCC ID UP2AWA24S”. 7. Operating requirements The module has no serviceable parts. The Digital Electronic Device manufacturer has control to the module via the serial data for data transmission modes and data rates as well as predefined output power settings. This can be seen in the “Data Sheet DSAWA24S” provided. 8. RF Exposure requirements The module meets the requirements for a portable device as per FCC RF exposure requirements and requires a separation distances of 20cm between the radiating structure and human as reflected in the module’s UMAWA24S User Manual. Sincerely, _________________________ Wayne Embree Design Services Manager Artaflex Inc.

ELECTRONICS MANUFACTURING AND DESIGN Artaflex Inc. TEL: 905.479.0148 215 Konrad Crescent FAX: 905.479.0149 FRM-00002 Rev. 1.0 Markham, ON L3R8T9Canada www.artaflex.com AWA24S Module photos ELECTRONICS MANUFACTURING AND DESIGN Artaflex Inc. TEL: 905.479.0148 215 Konrad Crescent FAX: 905.479.0149 FRM-00002 Rev. 1.0 Markham, ON L3R8T9Canada www.artaflex.com

Title: FCC Label, PA Module Colour: Black text Dimensions: 0.6” x 0.6” Drawn: D. Lem Checked: D. Lem Dwg No: CST0464 Rev: A1 Date: 11 June 07 0.600" 0.600" FCC Label Placed on Top of Shield

ELECTRONICS MANUFACTURING AND DESIGN Artaflex Inc. TEL: 905.479.0148 215 Konrad Crescent FAX: 905.479.0149 FRM-00002 Rev. 1.0 Markham, ON L3R8T9Canada www.artaflex.com AWA24S Module photos ELECTRONICS MANUFACTURING AND DESIGN Artaflex Inc. TEL: 905.479.0148 215 Konrad Crescent FAX: 905.479.0149 FRM-00002 Rev. 1.0 Markham, ON L3R8T9Canada www.artaflex.com

2.4GHz DSSS Radio Module with Integrated Power Amplifier AWA24S Data Sheet Artaflex Inc.



































  




















  





 
!


"#$%&




Page 1 of 14 '())***+,- . - +

& /&/ $
1 Features •
%



+/012
 
 3 
' 
' 
45

-
*
- 

6' 

  

 - 789
":
;<=&#=


  
:

•
!'  


-  
*-*
>-
 ,

 -
4>5
?
4+
012@+$#
0125
•
" 



' 
 
4% 
A

8 5
•
% 
'* 
'

B#
8
•
  
  6
'

@&#
8

•
- '
 
C

μ
•
!
"!

,
'

+
•


 
'

 
?'
0<


,

?'
•

%
 3  
4%5
/


-- 
  
•
< 
" 
 =



•
<
'

<
 -
 
•
 '
=/?6
% 

  
<><!
•

 9
/
6 


  '
•
  
-
 
>
4>5
•
/12
:>
-- 
 ,
•
D
'' 6
,*
 3 
•
 -
: ' -
> ,
4:>5
-
*-

- '

•
E -

2-

•
!' 
-
#+#
-
•
!' 
 ' 
,


F

•
2 (

 +


G

+#

4 +$H
.
+H5

•
 (

 
•
<
-
'' -
0


<
:

ID
#
#$/ 
ID
#
$&/ 
ID
#
$&/

>6

/ 

•

<
-
'' -
45
0
'  
 
,

 
?6
--*
 

'


<
>

 
*
'
2 Functional Description %
,- .

 - 

-
,, 

 '- 

-
-
,
 

.

 *
+/012
'+
%


  
,
,-
' 


<)I%>
4I75)>6

 , +

%


 -?-


 --
:8
 


?
 
2--6

--6


 
:8






/'
  
)
 +

3 Application

•
PC Human Interface Devices (HID) •
 - 
6?


•
E!>:

 - 
1  
•
 - 
0 '
•
 
-
•
White Goods (Smart Appliances) •

 
•
 
 '
•
* 
•
 
•
6 
•
Consumer •
'

" 
I3' 
•
 
-
•

?*, 
•
:   
%-
•
"
- 
•
%6
•
Building/Home Automation •
 
  
  
45
•
!/
:
6 
•
0

'  
•
-

 6
•
"
-
•
- 
-
•
<
-
•
Industrial Control •

<>

 

6 
•
> 6
 
•
:/,/-
6 
•
<6
 
•

3
•
Transportation •
 
6- 
I6
*
*-  
4 I5
•
-
8
%
•

2.4GHz Radio Module with Integrated Power Amplifier AWA24S Data Sheet Artaflex Inc.





































  






















  



 
!

"#$%&





Page 2 of 14 '())***+,- . - +
& /&/ $
4 Functional Overview %

-
'  

 '- 
:>

<
 
* - 
!I+
%
-

  

 '- 
* - 
 
-
' 


*-*
+/012
>
, 3 6
?+
>

  
,
6 
 '-
*
*-/*
 -
  
?6
I'
I%>
ID
#
$&/ 
I%>
ID
#
$&/
J
I%>
ID
#
#$/ 
7
<
:


>6

/ 
+ %
-


+/012
/?'
0<

  
' 

?,, 
' 
, 

? ?
-- 
   
-
 
>
4>5

:>
 ,
,

, 

 
,+
%

''
&$
 
/12
 -
4 -
6
- 


,

,
 
 -

 
K5+
>

 

? ?
' , 

' ) /' 
*-

0<

4
?)
/
0< 5

? ?
' , 

,
<
4!<5
I
,
<
4I!<5
  

 =
  

 +
%
? ?
6
-
?
, 

 --6
 
*- 
4 5

' 
*  

-
' 

   +  

  
 
*
' 
, 
?- 

 

-*6
 6

  

  

6
,

'' 
?
 
. '

?-

 '- 
,
. /
6 

*
,,  
  

,,  

 +
%
-
?- 

 '- 
,
6 


6 
*



 

 
 
)


-*/  
 ,  
  



-* 

 

- 
 
)


 ,  
  + +
"
"6 
 
%

-
''

,--*

' 
, 
,  ( SOP
@
: 
? 
*

/6 ?-

,
: 
4!:5
 +
%

 3 

0<

$
 
?

'-






'' 


 L
,
, 

?- 
 

!:


,  
*  
*
 
 -

   +
%
!:M!IM

 
,

!:

,,  
,

 
,

N?6H
,

' 

,
  
6
?

,,  
- +
!:

?
, 

?


- 

?
 
,

-+
EOP
@
% 

*
'
,
  


,

' +
>,
!:

?- 
 

' 
- 
, -
6
?
?- +
0<

$

?-

- 
, -+
%


,
$/?
, 

!:
6 ?-


  


'6-

 +
>,

- 
, -

?- 

I
,
: 
4I!:5


,  
, 
  '
,

 ? 
,
?6 
 , 


- 
, -
'-
*
?6 
,

 =
4,
?- O
? -*5+
%
- …

Text truncated - open the document above for the full version.

Flom Test Labs p0790010, d07c0019 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax Date: December 18, 2007 Applicant: Artaflex, Inc. 215 Konrad Crescent Markham, Ontario L3R8T9 Canada Attention of: Sebastian Palazzo [email protected] (905)479-0148 X292 Equipment: AWA24S FCC ID: UP2AWA24S FCC Rules: Radio Frequency Radiation Exposure Limits 47 CFR 1.1310 MPE - Mobiles X Fixed Based Station Gentlemen: Enclosed please find your copy of the Supplemental Test Data Report, the whole for Environmental Assessment (MPE) of the referenced equipment as shown. Please allow from 8-12 weeks to hear from the Commission, who may request additional data or information, and even a sample for pre-grant audit testing. Should you need any clarification, just fax or phone. Thank you again for this order - it has been a pleasure to be of service. Sincerely yours, Hoosamuddin S. Bandukwala, Lab Director Date: December 18, 2007 Flom Test Labs p0790010, d07c0019 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Artaflex, Inc. Equipment: AWA24S FCC ID: UP2AWA24S FCC Rules: Radio Frequency Radiation Exposure Limits 47 CFR 1.1310 MPE - Mobiles X Fixed Based Station Gentlemen: On behalf of the Applicant, enclosed please find the Supplemental Test Data Report, the whole for Environmental Assessment (MPE) of the referenced equipment as shown. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Sincerely yours, Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs p0790010, d07c0019 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax Environmental Assessment for Mobiles for FCC ID: FCC ID: UP2AWA24S Model:AWA24S to Federal Communications Commission 47 CFR 1.1310 Radio Frequency Radiation Exposure Limits Date Of Report: December 18, 2007 At the Request of: Artaflex, Inc. 215 Konrad Crescent Markham, Ontario L3R8T9 Canada Attention of: Sebastian Palazzo [email protected] (905)479-0148 X292 Supervised By: Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs p0790010, d07c0019 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax Table of Contents Rule Description Page . Test Report 1 . Identification of the Equipment Under Test 2 . Standard Test Conditions and Engineering Practices 4 1.1310 Environmental Assessment 5 Flom Test Labs p0790010, d07c0019 3356 N. San Marcos Place, Suite 107 Page 1 of 5 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax Required information per ISO 17025-2005, paragraph 5.10: a) Test Report (Supplemental) b) Laboratory: (FCC: 31040/SIT) (Canada: IC 2044) Flom Test Labs 3356 N. San Marcos Place, Suite 107 Chandler, AZ 85225 c) Report Number: d07c0019 d) Client: Artaflex, Inc. 215 Konrad Crescent Markham, Ontario L3R8T9 Canada e) Identification: AWA24S FCC ID: UP2AWA24S Description: 2.4 GHz DSS Transmitter f) EUT Condition: Not required unless specified in individual tests. g) Report Date: December 18, 2007 h, j, k): As indicated in individual tests. i) Sampling method: No sampling procedure used. l) Uncertainty: In accordance with MFA internal quality manual. m) Supervised by: Hoosamuddin S. Bandukwala, Lab Director n) Results: The results presented in this report relate only to the item tested. o) Reproduction: This report must not be reproduced, except in full, without written permission from this laboratory. Flom Test Labs p0790010, d07c0019 3356 N. San Marcos Place, Suite 107 Page 2 of 5 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax Identification of the Equipment Under Test (EUT) Name and Address of Applicant: Name and Address of Applicant: Artaflex, Inc. 215 Konrad Crescent Markham, Ontario L3R8T9 Canada Manufacturer: Artaflex, Inc. 215 Konrad Crescent Markham, Ontario L3R8T9 Canada FCC ID: UP2AWA24S Model Number: AWA24S Description: 2.4 GHz DSS Transmitter Type of Emission: Frequency Range, MHz: 2407 to 2467 Power Rating, Watts: 104 mW Switchable Variable x N/A Modulation: AMPS TDMA CDMA OTHER Antenna: Helical Monopole Whip Other Note: For RF Safety test antenna gain taken at the upper range of expected gain (i.e. 0 dBd) and RF Power set to highest nominal power across all channels. Flom Test Labs p0790010, d07c0019 3356 N. San Marcos Place, Suite 107 Page 3 of 5 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax A2LA “A2LA has accredited Flom Test Labs, Inc. Chandler, AZ for technical competence in the field of Electrical testing. The accreditation covers the specific tests and types of tests listed on the agreed scope of accreditation. This laboratory meets the requirements of ISO 17025:2005 ‘General Requirements for the Competence of Testing and Calibration Laboratories’ and any additional program requirements in the identified field of testing.” Please refer to www.a2la.org for current scope of accreditation. Certificate number: 2152.01 Flom Test Labs p0790010, d07c0019 3356 N. San Marcos Place, Suite 107 Page 4 of 5 Chandler, Arizona 85225-7176 (866) 311-3268 phone, (480) 926-3598 fax Standard Test Conditions and Engineering Practices Except as noted herein, the following conditions and procedures were observed during the testing: In accordance with ANSI C63.4-2004 and unless otherwise indicated in the specific measurement results, the ambient temperature of the actual EUT was maintained within the range of 10° to 40°C (50° to 104 °F) unless the particular equipment requirements specify testing over a different temperature range. Also, unless otherwise indicated, the humidity levels were in the range of 10% to 90% relative humidity. Prior to testing, the EUT was tuned up in accordance wit…

Text truncated - open the document above for the full version.

Flom Test Labs 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 p0790010, d07b0030 (866) 311-3268 phone, (480) 926-3598 fax Date: November 26, 2007 Federal Communications Commission Via: Electronic Filing Attention: Authorization & Evaluation Division Applicant: Artaflex, Inc. Equipment: AWA24S FCC ID: UP2AWA24S FCC Rules: 15.247 Gentlemen: On behalf of the Applicant, enclosed please find Application Form 731, Engineering Test Report and all pertinent documentation, the whole for approval of the referenced equipment as shown. We trust the same is in order. Should you need any further information, kindly contact the writer who is authorized to act as agent. Sincerely yours, Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 p0790010, d07b0030 (866) 311-3268 phone, (480) 926-3598 fax List Of Exhibits (FCC Certification (Transmitters) - Revised 9/28/98) Applicant: Artaflex, Inc. FCC ID: UP2AWA24S By Applicant: 1. Letter Of Authorization 2. Identification Drawings Id Label Location Info Attestation Statement(S) Location of Compliance Statement 3. Documentation: 2.1033(B) (3) User Manual(S) (4) Operational Description (5) Block Diagram (5) Schematic Diagram (7) External Photographs Internal Photographs Parts List Active Devices By F.T.L. Inc. A. Testimonial & Statement of Certification B. Statement of Qualifications Flom Test Labs 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 p0790010, d07b0030 (866) 311-3268 phone, (480) 926-3598 fax Transmitter Certification of FCC ID: UP2AWA24S Model: AWA24S to Federal Communications Commission Rule Part(s) 15.247 Date Of Report: November 26, 2007 On the Behalf of the Applicant: Artaflex, Inc. 215 Konrad Crescent Markham, Ontario L3R8T9 Canada Attention of: Sebastian Palazzo [email protected] (905)479-0148 X292 Supervised By: Hoosamuddin S. Bandukwala, Lab Director Flom Test Labs 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 p0790010, d07b0030 (866) 311-3268 phone, (480) 926-3598 fax The applicant has been cautioned as to the following: 15.21 Information to User. The users manual or instruction manual for an intentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.27(a) Special Accessories. Equipment marketed to a consumer must be capable of complying with the necessary regulations in the configuration in which the equipment is marketed. Where special accessories, such as shielded cables and/or special connectors are required to enable an unintentional or intentional radiator to comply with the emission limits in this part, the equipment must be marketed with, i.e. shipped and sold with, those special accessories. However, in lieu of shipping or packaging the special accessories with the unintentional or intentional radiator, the responsible party may employ other methods of ensuring that the special accessories are provided to the consumer, without additional charge. Information detailing any alternative method used to supply the special accessories for a grant of equipment authorization or retained in the verification records, as appropriate. The party responsible for the equipment, as detailed in § 2.909 of this chapter, shall ensure that these special accessories are provided with the equipment. The instruction manual for such devices shall include appropriate instructions on the first page of text concerned with the installation of the device that these special accessories must be used with the device. It is the responsibility of the user to use the needed special accessories supplied with the equipment. Flom Test Labs 3356 N. San Marcos Place, Suite 107 Chandler, Arizona 85225-7176 p0790010, d07b0030 (866) 311-3268 phone, (480) 926-3598 fax Testimonial And Statement Of Certification This is to certify that: 1. That the application was prepared either by, or under the direct supervision of, the undersigned. 2. That the technical data supplied with the application was taken under my direction and supervision. 3. That the data was obtained on representative units, randomly selected. 4. That, to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct. Certifying Engineer: Hoosamuddin S. Bandukwal…

Text truncated - open the document above for the full version.