V36BT-USB-M2USB BLUETOOTH DONGLE

Uers Manual One of the smallest featured ,Bluetooth wireless USB adapters,ideal for your for PAD ,Phone ,Notebook and many othe Bluetooth devices. Versatile size breaks the unadventurous design of competing Bluetooth adapters by offering most of the host electronics within the confines of the actual USB connector!Result –a Bluetooth adapter which can be left permanently plugged into a Notebook USB Port ,while in its bag ,or when moving from office to office whit fear of the device being damaged or lost. Fully Bluetooth Version2.0 compliant for simultaneous commections to other Bluetooth devices and a high-powered Class-1 100metre range using a data transmission of up to 3Mbps coupled with extensive Wireless Security. Ideal for Bluetooth PAN(personal area networking),VOIP applications ,data transfer and Fax/Dialup applications . Advanced features Ultra compact-slightly larger than a USB plug Up to 3Mbps Bluetooth data speeds Bluetooth v2.0 and v1.2 compliant Class-1 compliant –up to 100 metre range USB2.0 interface-plug n’ Play Ideal for Phone,PDA,Notebook and Printer Bundled Bluesoleil Utilities for easy connection Supports VolP,Data ,Dial-UP/Fax and Headsets Ideal for Windows 98,SE,ME,2000,XP ,Vista and Win7 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Blupont Limited Tel: 86-755-82880659 Fax: 86-755-83302045 Tune up Procedure The max power output: 12 ±1dBm The tune up is fixed by the manufacturer. The tune-up power tolerance range is ±1dBm. BOM list

      
             
  !!!!"! #  #$
%
$
%
&'' (!) *+ ,!- .+/ .&/ 0 . 0 0 1 2 3*4 556-*  2   

 2-

iFa rt H,T&^ (Wgtl ) €^ FFl A E SinTek Laboratory Co., Ltd. TEL: 0755-27608353; 27604866; 27 607 544 FAX: 0755-27608359 Test Lab Attestation Letter This attestation is to confirm that the betow tisted device was tested at our Test Facilities Located at: Test Lab Name: Test Lab Address: Test t-ab Regisif ration Numbe'r: Date of Test: Test Report Number: Applicant Name: FCC iD: Name of Engineer(s) Perfr)rming Test: Company Name of Engirreer(s) l:'erfr:irming l'ert: SinTek Laboratory Co., Ltd. No.7, Xinshidai Industrial, Guantian Village, Shiyan Tou'rr, Baoan District, Shenzhen, Guangdong, China 963'141 201?.-4-23 8ST12050200Y-1 E-3, 8ST12050200Y-1 E-3-2 Btupont Limited V36BT-USB-M2 Steven SinTek Laboratory Co., Ltd. Hong Huang TES"]I LABORATORY. Signature of Ar.rt-horized Rr3pi'esentative of t:he Test Laboratory: Fut[ Contact Name: EMC Assistant Address: i'4 !|| 4i':l.a h E t&E I I | +t tJi tr'l'f t r {: B

External Photo

FCC Certification Label FCC ID: V36BT-USB-M2 Label Location on EUT EUT View/ FCC ID Label Location

Internal Photo Antenna

CAM350 V 7.6 : Fri Sep 09 08:49:47 2011 - 2045.cam PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

     

  
 
 
 
                !
 !
 
   "    #" 
 "  $  # # # 
 $ "  " 

% % #  #  #  !  
 #
  #$  $  " $ % $ % %    $
  !&  "
  &  "
  !&  $
  &     
" & 
$
&                #   #  #  # # #                %     % $ "   "  $ "     " $ $    %   $"  $      %    %    "  %     
 
 
   $  %   
            '    ! % $     $ $  %   (     %                 % $   
%      % % $   %          #      

FCC PART 15.249 EMI MEASUREMENT AND TEST REPORT For Blupont Limited 713 RM, 206 East, Tairan 4 Road, CheGongMiao Industrial Park, Futian District, ShenZhen, China FCC ID: V36BT-USB-M2 May 18, 2012 This Report Concerns: Original Report Equipment Type: USB Bluetooth Dongle Test Engineer: Steven Report No.: BST12050200Y-1E-3 Receive EUT Date/Test Date: April 17, 2012/ April 18-23, 2012 Reviewed By: Christina Prepared By: Shenzhen BST Technology Co.,Ltd. 3F,Weames Technology Building, No. 10 Kefa Road, Science Park, Nanshan District,Shenzhen,Guangdong,China Tel: 0755-267477513 Fax: 0755-267477513 ext.826 Note: The test report is specially limited to the above company and this particular sample only. It may not be duplicated without prior written consent of Shenzhen BST Technology Co.,Ltd. This report must not be used by the client to claim product certification,approval,or endorsement by NVLAP, NIST or any agency of the US Government. Blupont Limited FCC ID: V36BT-USB-M2 BST FCC ID REPORT: BST12050200Y-1E-3 Page 2/21 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................3 1.1. Report information ............................................................................................................3 1.2. Measurement Uncertainty .................................................................................................3 2. PRODUCT DESCRIPTION ......................................................................................................4 2.1. EUT Description ...............................................................................................................4 2.2. Block Diagram of EUT Configuration..............................................................................4 2.3. Support Equipment List ....................................................................................................4 2.4. Test Conditions .................................................................................................................4 3. FCC ID LABEL...........................................................................................................................5 4. TEST RESULTS SUMMARY ...................................................................................................6 Modifications ................................................................................................................................6 5. TEST EQUIPMENT USED .......................................................................................................7 6. ANTENNA REQUIREMENT ...................................................................................................8 6.1. STANDARD APPLICABLE............................................................................................8 6.2. ANTENNA CONNECTED CONSTRUCTION ..............................................................8 6.3. Result ................................................................................................................................8 7. CONDUCTED POWER LINE TEST .......................................................................................9 7.1. Test Equipment .................................................................................................................9 7.2. Test Procedure ..................................................................................................................9 7.3. Test Setup..........................................................................................................................9 7.4. Conducted Power line Emission Limits............................................................................9 7.5. Conducted Power Line Test Result.................................................................................10 8. RADIATED EMISSION TEST ...............................................................................................12 8.1. Test Equipment ...............................................................................................................12 8.2. Test Procedure ................................................................................................................12 8.3. Radiated Test Setup ........................................................................................................12 8.4. Radiated Emission Limit.................................................................................................14 8.5. Radiated Emission Test Result .......................................................................................15 9. BAND EDGE .............................................................................................................................17 9.1. Test Equipment ...............................................................................................................17 9.2. Test Procedure ................................................................................................................17 9.3. Band Edge FCC 15.249(d) Limit ....................................................................................17 9.4. Band Edge Test Result ....................................................................................................18 Blupont Limited FCC ID: V36BT-USB-M2 BST FCC ID REPORT: BST12050200Y-1E-3 Page 3/21 1. GENERAL INFORMATION 1.1. Report information 1.1.1.This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results must not be used to indicate or imply that BST approves recommends or endorses the manufacture, supplier or use of such product/equipment, or that BST in any way guarantees the later performance of the product/equipment. 1.1.2.The sample/s mentioned in this report is/are supplied by Applica…

Text truncated - open the document above for the full version.

Radiated emissions test Conducted emissions test