V36WL-600N-E2PCI-E 150M WIRELESS LAN CARD

1 Wireless Network Card Installation Guide System Requirements ● One available PCI 2.0/2.1/2.2/2.3 port ● One available USB 1.1/2.0 port ● Operating System: Windows ME/2000/XP/Vista/win7 ● Minimum Disk Space: 2MB Software Installation You must have the following information available before installing your Products . 1. Wireless Network Name (SSID) and, 2. Encryption/Network Key (if applicable) Note: Screen-shot images provided below is based on Windows Vista. You may see different screen on other operating systems but procedures are the same. CAUTION: Products should NOT be inserted at this time. You will be asked to insert after the software is completely installed. A. Power on your computer and allow Windows 2000/ME/XP/Vista/Win7 to load fully. B. Insert the installation CD to your CD-ROM and run “Setup.exe” program. “Ralink Wireless LAN – InstallShield Wizard” will appear on your screen, select “I accept the terms of the license agreement” then click “Next.”. 2 C. Click “Install” to begin the installation and it will copy all necessary files to your hard disk automatically. D. Click “Finish” when you see “InstallShield Wizard Complete” to finish the installation. 3 You will see “Configuration & Monitor Utility” icon appears on your system tray when the installation is completed successfully. If you don’t see the icon, we highly recommended you to restart the computer. However, if you still don’t see the icon appears, please uninstall and reinstall the software again. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 4 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”

5 5 4 4 3 3 2 2 1 1 D D C C B B A A PA T/ R BPF Interface Signals 3.3V SS T12 LP07 A PCIe Half-MiniCard Interface 2.4 G Hz TX0 PAP E_G0 SPD T Sw itc h Serial EEPR OM 2.4 G Hz TX RT3090 2.4 G Hz RX0 1.5V Control Signals Antenn a Connect or BLOCK-1X1-24G.SCH 1.4 Block Diagram - 2.4GHz PCIe Half-Mini Card 1T1R RALINK TECHNOLOGY, CORP. C 7 7 Tuesday, October 21, 2008 Title v e R r e b m u N t n e m u c o D e z i S t e e h S : e t a D of 40 M Hz

i' **w; WR;*$)H it H, f &^ (ffr ,ll ) A FE A Fl '*-- ---- - - ------'u SinTek Laboratory Co., Ltd. TEL: 0755-2760tt353: 27604866: 27 607 544 FAX: 0755-27608359 This attestation is to cclnfirm Test Lab Attestation Letter thait the below listed device was tested at our Test Facitities Located at: -fest Lab Name: Test Lab Address: Test l-ab Regist.ration Number: Date of Test: Test Report Number: r\pplicant Namr:: FCC ID: Name of Engineer(s) Performing Te:;t: Conrl:rany Name of Engirreer(s) . [rerf r:irming 1-e:;t: SinTek Laboratory Co., Ltd. No.7, Xinshidai Industrial, Guantian Vi[[age, Shiyan Tovt,'t't, Baoan District, Shenzhen, Guangdong, China 963441 2012-4-23 85T12050201Y-1 E-3, 85T12050201Y-1 E-3-2 Btupont Limited v36WL-600N-E2 Steven SinTek Laboratory Co., Ltd. TES]| LABORATOR\. Signature of Authorized Representative of the Test Laboratory: Futt Contact Name: Position/Title: Address:iif !l, :i: |t8.4t i I,AE' I I I ft,lJi |l1i \: {trt tx

External Photo

FCC Certification Label FCC ID: V36WL-600N-E2 Label Location on EUT EUT View/ FCC ID Label Location

Internal Photo Antenna

Operation Description The EUT is a Wireless Wi-Fi adapter with 11 channels(802.11b, g, n (20MHz)) or 7 channels(802.11n (40MHz)). This device provides four kinds of transmitting speed 1, 2, 5.5 and 11Mbps, the modulation of device is BPSK, QPSK and CCK (IEEE 802.11b) and eight kinds of transmitting speed 6, 9, 12, 18, 24, 36, 48 and 54Mbps are provided, the technology of this device used is OFDM (IEEE 802.11g),108,130,270Mbps(IEEE 802.11N).The device adapts direct sequence spread spectrum modulation. This Wireless Wi-Fi module, compliant with IEEE 802.11b and IEEE 802.11g/n, is a high-efficiency Wireless LAN adapter. It allows your computer to connect to a wireless network and to share resources, such as files or printers without being bound to the network wires. Operation in 2.4GHz Direst Sequence Spread Spectrum (DSSS) radio transmission, the Wireless Wi-Fi module Wired Equivalent Protection (WEP) algorithm is used. In addition, its standard compliance ensures that it can communicate with any IEEE 802.11b and IEEE 802.11g/n network. Two antennas to support 1(Transmit) * 1(Receive).

Blupont Limited Tel: 86-755-82880659 Fax: 86-755-83302045 Tune up Procedure The max power output: 18 ±2dBm The tune up is fixed by the manufacturer. The tune-up power tolerance range is ±2dBm. BOM list

55 44 33 22 11 D D C C B B A A Filename:HMC-RT3090-QFN-V14ST-BPF-CON 1-081104.DSN HMC-RT3090-QFN-V14ST.SCH 1.4 2.4GHz PCIe Half-Mini Card - RT3090 RALINK TECHNOLOGY, CORP. B 17 Tuesday, November 04, 2008 TitleSize Document Number Rev Date: Sheet of Front-End2-FrontEnd MPAOG TR_SWN0TR_SW0RFING 2.4GHz PA1-PA-SST12LP07A PA_PE_G MPAOG PA_RFGPD MAC/Transceiver RT30903-RT3090-WLAN PA_RFG TR_SW0 TR_SWN0 PA_PE_G RFING PD PERST#PETX0_PPETX0_MPERX0_PPERX0_MREFCK_PREFCK_MWAKE#LD2_YNRFTXDIS#CLKREQ#BT_DATABT_CHCLK POWER6-POWERPCIe Mini Card-Half I/F4-MiniCard-Half.SCH PERST# PETX0_P LD2_YN WAKE# PETX0_M PERX0_P PERX0_M REFCK_P REFCK_M RFTXDIS# BT_CHCLK CLKREQ# BT_DATA TR_SW0TR_SWN0PA_PE_G CLKREQ#BT_DATABT_CHCLKPERST#WAKE#PETX0_PPETX0_MPERX0_PPERX0_MREFCK_PREFCK_MLD2_YNRFTXDIS# MPAOG PD PA_RFG RFING PA_PE_G 55 44 33 22 11 D D C C B B A A Close to PA 1-PA-SST12LP07A.SCH 1.4 2.4GHz PA RALINK TECHNOLOGY, CORP. B 27 Tuesday, November 04, 2008 TitleSize Document Number Rev Date: Sheet of 3.3V PA_PE_G GND GND GND GND GND PA_RFG MPAO GND GND VB1 PAIN_G PAOG GND PD VCC_11 GND MPAOG GND BP2 GND Det GND GND 3.3V GND GND GND GND GND GND GND GND GND C101.5pF/NI 12 L4 1pF/RF 12 C81.2pF/NI 12 L1 2.2nH/RF 12 C140.1uF/NI 12 C13 68nF/RF 1 2 L5 1.8nH/RF 1 2 C61.2pF/RF 12 L2 10nH/RF 12 U1 BF1608-E2R4DRA/RF 4 2 3 1 BI BO G G R12 0 ohm/NI 1 2 C310uF/RF 12 C20.1uF/RF 12 R30 ohm/NI 12 C7 1nH/RF 1 2 C10.1uF/RF 12 U2 SST12LP07A 123 4 5 6 789 10 11 12 13 NCRFINNC VCCB Vref PD NC RFOUT NC NC VCC1 NC GND R2 80.6/RF 1 2 C1210pF/RF 12 C91.8pF/RF 12 C5 1.8nH/RF 1 2 C41pF/NI 1 2 PA_PE_G [4] PA_RFG [4] MPAOG [3] PD [4] 55 44 33 22 11 D D C C B B A A MainAntenna AUX.Antenna CON1(1T OR 1R) ==> Put C17,U5,C27.C39 ==> Remove C18,C80.CON2,C24,C22,C25,C11 CON1(1T), CON2(1R) ==> Put C18,C80,CON2,C24,C22,C25,C11 ==> Remove C17,U5,C27,C39 2-Front_End.SCH 1.4 Front_End RALINK TECHNOLOGY, CORP. B 37 Tuesday, November 04, 2008 TitleSize Document Number Rev Date: Sheet of ANTE1 MPAOG MPAOG TR_SW0 GND ANTE1E TR_SWN0ANTE2E GND GND GND GND GND MPAOG_1 MPAOG ANTESA RF_ING ANTE11 ANTE2 RFING GND GND GND GND GND GND GND C27 10pF/RF 1 2 C21 1.8pF/RF 12 C11 10pF/NI 1 2 C24 3.3nH/NI 12 U5 uPG2179TB/RF 321 654 OUT1 GND OUT2 VC2INVC1 C80 10pF/NI 1 2 C22 0 ohm/NI 1 2 C396.8pF/RF 1 2 C252pF/NI 12 CON1 SMA/UFLR/RF 1 2 3 C17 10pF/RF 1 2 C26 10pF/RF 1 2 C19 10pF/RF 1 2 C16 2.2nH/RF 1 2 CON2 SMA/UFLR/NI 1 2 3 C201.8pF/RF 12 C18 10pF/NI 1 2 TR_SW0 [4] TR_SWN0 [4] RFING [4] MPAOG [2] 55 44 33 22 11 E E D D C C B B A A 3-RT3090_WLAN.SCH 1.4 RT3090_WLAN RALINK TECHNOLOGY, CORP. C 47 Tuesday, November 04, 2008 TitleSize Document Number Rev Date: Sheet of 1.2VA_13.3V1.2VGND1.5V EECS ORG 3.3V 3.3VAUXGND GPIO0RFDSB 3.3V GPIO1 RFTXDIS# 3.3V BT_DATABT_CHCLK PME# GND 1.2V3.3V1.2VADC_VREF GND 1.2V 1.2V 1.2V 1.2V 1.2VA_1 3.3V 3.3V 1.5V 1.2VA_1 1.2VA_2 GND 40MX1 40MX2 1.2VA_2 1.2VA_2 1.2VA_1 1.2VA_1 GND PA_PE_G LED_LKACT# LD2_YNCLKREQ# RST_N 3.3V PERST# PRSTN 1.2V TR_SWN0 HERXT GND REFCK_PREFCK_M 1.2V 3.3V 3.3VGND 3.3V 1.2V 1.2V 3.3V PETX0_M PETX0M PETX0_P PETX0P TR_SW0 PA_RFG RF_2G_OUTP 1.2VA_2 GNDPLL_VC_CAP 1.2VA_2 1.2VA_1 1.2V WAKE# GND BG_RES_12K EESK GND GND GND GND 3.3V 3.3V PERX0_M RFING GND RFING0+ RFING0- GNDRF_ING_L PERX0_P PD PD GND 1.5V GND 3.3V GND GND GND 1.2V 1.2VA_1 3.3V GND 3.3VAUXGND 3.3V 3.3V GND GND GND 3.3V GNDGND GND GND 3.3V GND 3.3V GND GND GND GND GND GND 3.3V GND GND GND 1.2VA_2 t RT1 CT6103-3435-5P 12 U993C66-TSSOP/NI 1234 5678 CSSKDIDO GND ORG N/C VDD C570.1uF 12 L8 3.3pF/RF 1 2 C58 0.1uF 12 C43 0.1uF 1 2 R20 0 ohm 1 2 R1320K 12 C30 4.7nH/RF 1 2 R21 390/NI 1 2 TP1 1 C540.1uF/RF 12 R15 330 ohm 1 2 U8 RT3090-QFN(9X9) 123456789 101112131415161718 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39575655545352515049484746454443424140 77 RF0_2G_INPRF0_2G_INNRF0_V12ARF0_2G_OUTRF1_LO_V12ANCNCRF1_V12ARF0_PA_PERF_V33AVCCIOVDDTEST_ENLED_RDYG_NLED_ACT_NCLKREQ_NPERST_NLDO_CORE_VI15 RF0_LO_V12A RF_BB1_V12A VCO_VCO_V12A VCO_LO_V12A PLL_VC_CAP PLL_PRE_V12A PLL_DIV_V12A PLL_X1 PLL_X2 LDOPLL_OUT_V12 LDORF_IN_VX LDORF_OUT_V12 RF_TSSI_IN BG_V33A BG_RES_12K RF_BB2_V12A ADC_V12A ADC_V12A ADC_V12A NC LDO_CORE_VO12 RST_N VCCIO VDD PCIE_VP PCIE_33 TX0_M TX0_P PCIE_GD RX0_P RX0_M PCIE_GD PCIE_REXT REFCLK_P REFCLK_M PCIE_33 PCIE_VP TR_SW0_EEDI TR_SWN0_EEDO EESK ADC_V12D ADC_VREF BASE_TRX_IP BASE_TRX_IN BASE_TRX_QP BASE_TRX_QN PLL_DVDD_V12D PLL_AVDD_V12A VCCIO VDD LNA_PE_G1LNA_PE_G0 GPIO4GPIO3GPIO2GPIO1GPIO0 EECS GND R19 390/NI 1 2 R23 4.7K/NI 1 2 C44 0.1uF 1 2 R25 10 ohm/NI 1 2 C70 0.1uF 1 2 C4910pF/RF 12 R11 10K 1 2 R26 100K/NI 1 2 C2927pF/RF 1 2 C5010pF/RF 12 R22 0 ohm 1 2 C32 22nF/RF 12 2.5x3.2 U7 XTAL/3.2x2.5/40MHz/RF 12 43 R9 4.7K/NI 1 2 R27 4.7K/NI 1 2 L6 1.2pF/RF 1 2 C60 0.1uF 12 C470.1uF 12 C28 2.2nH/RF 1 2 C38 1nF/RF 1 2 C36 10pF/RF 1 2 R16 10 ohm/NI 1 2 R28 4.7K 1 2 R144.7K/NI 1 2 C33 100pF/RF 1 2 C56 1uF/RF 12 C620.1uF 12 L7 1.5nH/RF 12 R17 100K 1 2 C53 1uF/RF 12 C46 0.1uF 12 C45 10pF/NI 12 R10 12K/RF 1 2 C41 0.1uF 1 2 C31 0.5pF/RF 12 R29 191 ohm 1 2 C611uF 12 R24 10K/NI 1 2 R18 330 ohm 1 2 C40 0.1uF 1 2 C59 0.1uF 12 RFTXDIS# [5] BT_CHCLK [5]BT_DATA [5] WAKE# [5] PD [2] PA_PE_G [2] LD2_YN [5] CLKREQ# [5] PERST# [5] PERX0_P [5] PERX0_M [5] REFCK_P [5] REFCK_M [5] TR_SW0 [3] TR_SWN0 [3] PETX0_M [5] PETX0_P [5] PA_RFG [2] RFING [3] 55 44 33 22 11 D D C C B B A A 4-MiniCard_Half.SCH 1.4 PCI Express Mini Card Interface RALINK TECHNOLOGY, CORP. A 57 Tuesday, November 04, 2008 TitleSize Document Number Rev Date: Sheet of RST# 3.3V PERX0_MPERX0_P PERST# GNDGND GND GND GND 3.3V GND GNDGND CLK_REQ# 3.3V REFCK_MREFCK_P 3.3VAUX GNDGND LD2_YN PETX0_P GND PETX0_M GND RFTXDIS# GND BT_CHCLKBT_DATAWAKE# GND GND GND GND GND 3.3V 3.3V 3.3VAUX 1.5VIN GND GND C6510pF/NI 12 R31 330 ohm 12 C640.1uF 12 TOP BOT J1MiniCard_Card-v11-half 6828204182422363026322344248405250 1 1711 9 151921 7 23272935 10121416384446 35 132531333739414345474951 +1.5V RESERVED +1.5V RESERVED GNDGND +3.3Vaux PERST# USB_D- SMB_CLK GND SMB_DATA +3.…

Text truncated - open the document above for the full version.

FCC PART 15 CLASS B EMI MEASUREMENT AND TEST REPORT For Blupont Limited 713 RM, 206 East, Tairan 4 Road, CheGongMiao Industrial Park, Futian District, ShenZhen, China FCC ID: V36WL-600N-E2 May 18, 2012 This Report Concerns: Original Report Equipment Type: PCI-E 150M WIRELESS LAN CARD Test Engineer: Steven Fang Report No.: BST12050201Y-1E-3-2 Receive EUT Date/Test Date: April 21, 2012/ April 23, 2012 Reviewed By: Christina Prepared By: Shenzhen BST Technology Co.,Ltd. 3F,Weames Technology Building, No. 10 Kefa Road,Science Park, Nanshan District,Shenzhen,Guangdong,China Tel: 0755-26747751～3 Fax: 0755-26747751～3 ext.826 Note: The test report is specially limited to the above company and this particular sample only. It may not be duplicated without prior written consent of Shenzhen BST Technology Co.,Ltd. This report must not be used by the client to claim product certification,approval,or endorsement by NVLAP, NIST or any agency of the US Government. Blupont Limited FCC ID: V36WL-600N-E2 BST FCC ID REPORT: BST12050201Y-1E-3-2 Page 2/15 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................... 3 1.1. Report information............................................................................................................ 3 1.2. Measurement Uncertainty................................................................................................. 3 2. PRODUCT DESCRIPTION ...................................................................................................... 4 2.1. EUT Description ............................................................................................................... 4 2.2. Block Diagram of EUT Configuration ............................................................................. 4 2.3. Support Equipment List .................................................................................................... 4 2.4. Test Conditions .................................................................................................................4 3. FCC ID LABEL........................................................................................................................... 5 4. TEST RESULTS SUMMARY ................................................................................................... 6 Modifications ................................................................................................................................ 6 5. TEST EQUIPMENT USED ....................................................................................................... 7 6. CONDUCTED EMISSION TEST............................................................................................. 8 6.1. Block Diagram of Test Setup............................................................................................ 8 6.2. Test Standard .................................................................................................................... 8 6.3. Conducted Emission Limit(Class B) ................................................................................ 9 6.4. EUT Configuration on Test .............................................................................................. 9 6.5. Operating Condition of EUT ............................................................................................ 9 6.6. Test Procedure ..................................................................................................................9 6.7. Test Result ........................................................................................................................ 9 7. RADIATED EMISSION MEASUREMENT ......................................................................... 12 7.1. Block Diagram of EUT Configuration ........................................................................... 12 7.2. Test Standard ..................................................................................................................12 7.3. Radiated Emission Limit(Class B) ................................................................................. 13 7.4. EUT Configuration on Test ............................................................................................ 13 7.5. Operating Condition of EUT .......................................................................................... 13 7.6. Test Procedure ................................................................................................................ 13 7.7. Test Result ...................................................................................................................... 14 Blupont Limited FCC ID: V36WL-600N-E2 BST FCC ID REPORT: BST12050201Y-1E-3-2 Page 3/15 1. GENERAL INFORMATION 1.1. Report information 1.1.1.This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results must not be used to indicate or imply that BST approves recommends or endorses the manufacture, supplier or use of such product/equipment, or that BST in any way guarantees the later performance of the product/equipment. 1.1.2.The sample/s mentioned in this report is/are supplied by Applicant, BST therefore assumes no responsibility for the accuracy of information on the brand name, model number, origin of manufacture or any information supplied. Additional copies of the report are available to the Applicant at an additional fee. No third part can obtain a copy of this report through BST, unless the applicant has authorized BST in writing to do so. Test Facility - The test site used to collect the radiated data is located on the address of SinTek Laboratory Co.,Ltd. (FCC Registered Test Site Number: 963441) on No.7, Xinshidai Industrial, Guantian Village, Shiyan Town, Baoan Distric…

Text truncated - open the document above for the full version.

Radiated emissions test Conducted emissions test