VIYHRM3012Bluetooth Low Energy Module

Page 1 of 4 User Manual/ユーザーマニュアル 文書番号を入力 HRM3012 Ver.0.13 Draft Product and Technology R&D Division Hosiden Corporation User Manual/ユーザーマニュアル HRM3012 Author/発行者: Hiroki Hatsuda/初田 博樹 Department/発行部門: 2nd Engineering Dept./第二技術部 Approver/承認者: Shunji Muraoka/村岡 俊二 Document Number/文書番号: 文書番号を入力 Version/バージョン: 0.13 Status/ステータス: Draft Approved 承認 Checked 確認 Checked 確認 Written 作成 Page 2 of 4 User Manual/ユーザーマニュアル 文書番号を入力 HRM3012 Ver.0.13 Draft Product and Technology R&D Division Hosiden Corporation 1 Product Overview/製品概要 Item 項目 Specification 仕様 Remark 備考 Model Name 製品名 HRM3012 PMN：Bluetooth Low Energy Module Frequency Range 周波数範囲 From 2402 MHz to 2480 MHz. 2402 MHz以上2480 MHz以下 Operational Channel 作動チャンネル 2402 + 2n MHz (n = 0,1,2...39) Data Rate データレート 1 Mbps and 2 Mbps, 500kbps, 125kbps 1 Mbps及び2 Mbps, 500kbps, 125kbps Intended End Usage 用途 Bluetooth ® LE Product Bluetooth ® LE製品 Installation Method 組み込み方法 Surface mount and reflow 表面実装及びリフロー Operating Voltage 電圧範囲 From 1.8V to 3.63V, 3.0V typ 1.8V以上3.63V以下 3.0V typ 2 Legal Statement/ 法的声明 2.1 FCC Compliance/FCC 適合 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The regulatory label on the final system must include the statement: "Contains FCC ID: VIYHRM3012" or using electronic labelling method as documented in KDB 784748. The OEM integrators shall be responsible for testing and evaluation for any additional compliance requirements required under regulations of each region with their finished product that is installed this module. (for example:EMC, safety, etc) In case a conflict arises between Japanese and English versions, English version takes priority. Page 3 of 4 User Manual/ユーザーマニュアル 文書番号を入力 HRM3012 Ver.0.13 Draft Product and Technology R&D Division Hosiden Corporation この製品はFCC規則第15部に準拠しています。以下の2つの条件に従って動作します:（1）この製品 が有害な電波干渉を発生させることはない、および（2）この製品は、誤動作を発生させる可能性のある電 波干渉を含め、受信したあらゆる電波干渉を許容する必要がある。 本製品はテストの結果、FCC規則のパート15に準拠するクラスBデジタルデバイスの制限に適合してい ることが判明しています。これらの制限は住宅設備における有害な干渉に対する妥当な保護を提供する ように設計されています。この製品は無線周波数エネルギーを生成、使用、および放射する可能性があり、 指示に従って設置および使用しない場合、無線通信に有害な干渉を引き起こす可能性があります。ただし、 特定の設置で干渉が発生しないという保証はありません。この製品が電源を切ったり入れたりすることで ラジオまたはテレビの受信に有害な干渉を引き起こす場合は、次のいずれかの方法で干渉の修正を試み ることを 推奨します。 -受信ア ンテナの方向または位置を変更する。 -機器と受信機の間隔を広げる。 -受信機が接続されている回路とは別の回路のコンセントに機器を接続する。 -販売店または経験豊富なラジオ/テレビ技術者に相談する。 許可を得ることなくこの製品に変更または改造を加えると製品を使用するための許諾が取り消される場合 があります。 最終システムの規制ラベルには「Contains FCC ID: VIYHRM3012」またはKDB784748に記載されているよ うな電子ラベル表示方法を使用する旨を記述する必要があります。 OEMインテグレータは、このモジュールを搭載した最終製品について各地域の規制に基づいて必要とさ れる追加のコンプライアンス要件のテストと評価を行う責任があります。(例:EMC、安全性など。) 和文と英文の表記に関し疑義が生じた場合は、英文を優先します。 2.2 Industry Canada Compliance/ インダストリーカナダ適合 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The regulatory label on the final system must include the statement: “Contains IC: 7305A-HRM3012” The OEM integrators shall be responsible for testing and evaluation for any additional compliance requirements required under regulations of each region with their finished product that is installed this module. (for example:EMC, safety, etc) In case a conflict arises between Japanese, English and French versions, English version takes priority. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Létiquette réglementaire sur le système final doit inclure la déclaration: «Contient IC: 7305A- HRM3012» Les intégrateurs OEM seront responsables des tests et de lévaluation de toute exigence de conformité supplémentaire requise par les réglementations de chaque région avec leur produit fini sur lequel ce module est installé. (par exemple: CEM, sécurité, etc.) En cas de conflit entre les versions japonaise, anglaise et française, la version anglaise est prioritaire. Page 4 of 4 User Manual/ユーザーマニュアル 文書番号を入力 HRM3012 Ver.0.13 Draft Product and Technology R&D Division Hosiden Corporation この製品にはカナダのイノベーション・科学経済開発省が発行するライセンス免除RSSに準拠した送 信機及び受信機が含まれています。以下の2つの条件に従って動作します:…

Text truncated - open the document above for the full version.

Page 1 of 2 Antenna Specification/アンテナ仕様書 文書番号を入力 HRM3012 Ver.1.0 Approved Product and Technology R&D Division Antenna Specification/アンテナ仕様書 HRM3012 Author/発行者: Hiroki Hatsuda/初田 博樹 Department/発行部門: 2nd Engineering Dept./第二技術部 Approver/承認者: Shunji Muraoka/村岡 俊二 Document Number/文書番号: 文書番号を入力 Version/バージョン: 1.0 Status/ステータス: Approved Approved 承認 Checked 確認 Checked 確認 Written 作成 Page 2 of 2 Antenna Specification/アンテナ仕様書 文書番号を入力 HRM3012 Ver.1.0 Approved Product and Technology R&D Division 1 Antenna Information/アンテナ情報 Item 項目 Specification 仕様 Remark 備考 Model Name 製品名 HRM3012 Frequency Range 周波数範囲 From 2402 MHz to 2480 MHz. 2402 MHz以上2480 MHz以下 Antenna Type アンテナタイプ 1/4λ inverted F antenna 1/4λ 逆Fアンテナ Antenna Gain アンテナゲイン 0.35 dBi 2 Antenna Appearance/アンテナ外観 Appearance of the antenna is shown in the following figure (red square shows the antenna): アンテナの外観を下図に示す（赤枠部がアンテナ）。 Figure 1: Antenna Appearance/アンテナ外観 3 Change History/変更履歴 Version 版 Issue Date 発行日 Status 状態 Author 発行者 Purpose 発行理由 0.1 2020. Jan 31 Approved Hiroki Hatsuda 初田 博樹 First draft. 初版作成。 End of Document

Appendix PPhoto Documentation Page 1 of 4 50346974 001 Product: Bluetooth Low Energy Module Type Identification: HRM3012 Appendix PPhoto Documentation Page 2 of 4 50346974 001 Product: Bluetooth Low Energy Module Type Identification: HRM3012 Appendix PPhoto Documentation Page 3 of 4 50346974 001 Product: Bluetooth Low Energy Module Type Identification: HRM3012 Appendix PPhoto Documentation Page 4 of 4 50346974 001 Product: Bluetooth Low Energy Module Type Identification: HRM3012

HRM3012 Label ID FCC ID and ISED Number are marked on the shield case by laser marking.

HRM3012 product picture Top sideBottom sideTop side(No Shield case)

Produkte Products Prüfbericht - Nr.: Test Report No. 50346974 001 Seite 35 von 40 Page 35 of 40 6. Safety Human exposure 6.1 Radio Frequency Exposure Compliance 6.1.1 Electromagnetic Fields RESULT: Passed Test standard : FCC KDB Publication 447498 D01 v06 47CFR 1.1310 47CFR 2.1091 ISED RSS-102 issue 5 FCC: Therefore the maximum output power of the transmitter is 2.16mW < 10mW(Distance: 5 mm), hence the EUT is excluded from SAR evaluation according to FCC KDB publication 447498 D01: Mobile Portable RF Exposure. Canada: Maximum conducted peak power: 2.16mW Antenna Gain(Numeric): 0.35dBi Maximum EIRP available 2.3mW Since maximum output power of the transmitter is 2.3mW(maximum power)<4mW (distance ≤5mm ), hence the EUT is excluded from SAR evaluation according to Table 1 in ISED RSS-102, For limb-worn devices where the 10 gram value applies, the exemption limits for routine evaluation in Table 1 of ISED RSS-102 are multiplied by a factor of 2.5. ---End---

Produkte Products TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Prü fbericht-Nr.: Test Report No.: 50346974 001 Auftrags-Nr.: Order No.: 238134479 Seite 1 von 36 Page 1 of 36 Kunden-Referenz-Nr.: Client Reference No.: N/A Auftragsdatum: Order date: 7-Feb-2020 Auftraggeber: Client: Hosiden Corporation 4-33, Kitakyuhoji 1-Chome, Yao-City, Osaka, Japan Prü fgegenstand: Test item: Bluetooth Low Energy Module Bezeichnung / Typ-Nr.: Identification / Type No.: HRM3012 Auftrags-Inhalt: Order content: FCC Part 15C / IC RSS-247 Test report Prü fgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.247(DTS) ISED RSS-247 (02-2017) Wareneingangsdatum: Date of receipt: 15-Feb-2019 Prü fmuster-Nr.: Test sample No.: A001062094-002, 006 Prü fzeitraum: Testing period: 18-Feb-2020~25-Feb-2020 Ort der Prü fung: Place of testing: EMC/RF Laboratory Taipei Prü flaboratorium: Testing laboratory: TUV Rheinland Taiwan Ltd. Prü fergebnis*: Test result*: Pass Report date / tested by: 28-Feb-2020 Jack Chang/ Project Manager kontrolliert von / reviewed by: 28-Feb-2020 Ryan W. T. Chen / Project Manager Datum Date Name / Stellung Name / Position Unterschrift Signature Datum Date Name / Stellung Name / Position Unterschrift Signature Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Produkte Products Prü fbericht - Nr.: Test Report No. 50346974 001 Seite 2 von 36 Page 2 of 36 TEST SUMMARY 5.1.1 ANTENNA REQUIREMENT RESULT: Passed 5.1.2 MAXIMUM CONDUCTED PEAK OUTPUT POWER RESULT: Passed 5.1.3 6DB BANDWIDTH AND 99% BANDWIDTH RESULT: Passed 5.1.4 POWER DENSITY RESULT: Passed 5.1.5 CONDUCTED SPURIOUS EMISSIONS AND FREQUENCY BAND EDGE MEASURED IN 100KHZ BANDWIDTH RESULT: Passed 5.1.6 SPURIOUS EMISSION RESULT: Passed 5.2.1 MAINS CONDUCTED EMISSIONS RESULT: Passed 6.1.1 ELECTROMAGNETIC FIELDS RESULT: Passed Produkte Products Prü fbericht - Nr.: Test Report No. 50346974 001 Seite 3 von 36 Page 3 of 36 Contents 1. GENERAL REMARKS ............................................................................................... 5 1.1 COMPLEMENTARY MATERIALS ................................................................................. 5 1.2 DECISION RULE OF CONFORMITY.............................................................................. 5 2. TEST SITES ............................................................................................................ 6 2.1 TEST FACILITY ........................................................................................................ 6 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ...................................................... 7 2.3 TRACEABILITY ........................................................................................................ 8 2.4 CALIBRATION ......................................................................................................... 8 2.5 MEASUREMENT UNCERTAINTY ................................................................................. 8 3. GENERAL PRODUCT INFORMATION ........................................................................... 9 3.1 PRODUCT FUNCTION AND INTENDED USE ................................................................. 9 3.2 SYSTEM DETAILS AND RATINGS ............................................................................... 9 3.3 INDEPENDENT OPERATION MODES ......................................................................... 10 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS ............................................ 10 3.5 SUBMITTED DOCUMENTS ....................................................................................... 10 4. TEST SET-UP AND OPERATION MODES ................................................................... 11 4.1 PRINCIPLE OF CONFIGURATION SELECTION ............................................................ 11 4.2 TEST OPERATION AND TEST SOFTWARE................................................................. 11 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ............................................... 12 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE .............................................. 12 4.5 TEST SETUP DIAGRAM .......................................................................................... 12 5. TEST RESULTS ..................................................................................................... 14 5.1 TRANSMITTER REQUIREMENT & TEST SUITES ......................................................... 14 5.1.1 Antenna Requirement ................................................................................................................ 14 5.1.2 Maximum conducted Peak output power ................................................................................... 15 5.1.3 6dB Bandwidth and 99% Bandwidth .......................................................................................... 17 5.1.4 Power Density ................................................................................................…

Text truncated - open the document above for the full version.

Test Report No.50346974 001 Appendix D: Radiated and Mains Spurious Emission Data (File: 50346974 001AppendixD) Contents Spurious Emissions, Band Edges, 2.35-2.5G(Bluetooth Low Energy 500kbps) .......................................... 2 Spurious Emissions, Band Edges, 2.35-2.5G(Bluetooth Low Energy 2Mbps) .......................................... 14 Spurious Emissions, TX Mode, 1-26.5G(Bluetooth Low Energy 500kbps) .............................................. 26 Spurious Emissions, TX Mode, 1-26.5G(Bluetooth Low Energy 2Mbps) ................................................ 32 Spurious Emissions, TX Mode, 30M-1G(Bluetooth Low Energy 2Mbps) ................................................ 38 Spurious Emissions, TX Mode, 9k-30M(Bluetooth Low Energy 2Mbps) ................................................. 40 Spurious Emissions, Mains, 150kHz - 30MHz(Bluetooth Low Energy 500kbps) ..................................... 42 Spurious Emissions, Band Edges, 2.35-2.5G(Bluetooth Low Energy 500kbps) 2402MHz Horizontal 2402MHz Vertical 6 2440MHz Horizontal 7 8 2440MHz Vertical 9 10 2480MHz Horizontal 11 12 2480MHz Vertical 13 14 Spurious Emissions, Band Edges, 2.35-2.5G(Bluetooth Low Energy 2Mbps) 2402MHz Horizontal 15 16 2402MHz Vertical 17 18 2440MHz Horizontal 19 20 2440MHz Vertical 21 22 2480MHz Horizontal 23 24 2480MHz Vertical 25 26 Spurious Emissions, TX Mode, 1-26.5G(Bluetooth Low Energy 500kbps) 27 28 29 30 31 32 Spurious Emissions, TX Mode, 1-26.5G(Bluetooth Low Energy 2Mbps) 33 34 35 36 37 38 Spurious Emissions, TX Mode, 30M-1G(Bluetooth Low Energy 2Mbps) 39 40 Spurious Emissions, TX Mode, 9k-30M(Bluetooth Low Energy 2Mbps) 41 42 Spurious Emissions, Mains, 150kHz - 30MHz(Bluetooth Low Energy 500kbps) 43

Appendix X Photo Documentation Page 1 of 4 50346974 001 Product: Bluetooth Low Energy Module Type Identification: HRM3012 Photographs of the Test Set-Up Photograph 1: Set-up for Spurious Emissions (Front View 1) Photograph 2: Set-up for Spurious Emissions (Front View 2) Appendix X Photo Documentation Page 2 of 4 50346974 001 Product: Bluetooth Low Energy Module Type Identification: HRM3012 Photograph 3: Set-up for Spurious Emissions (Back View 1) Photograph 4: Set-up for Spurious Emissions (Back View 2) Appendix X Photo Documentation Page 3 of 4 50346974 001 Product: Bluetooth Low Energy Module Type Identification: HRM3012 Photograph 5: Set-up for Spurious Emissions (Back View 3) Photograph 6: Set-up for Spurious Emissions (Back View 4) Appendix X Photo Documentation Page 4 of 4 50346974 001 Product: Bluetooth Low Energy Module Type Identification: HRM3012 Photograph 7: Set-up for Mains Conducted testing (Front View) Photograph 8: Set-up for Mains Conducted testing (Back View)