VVJ-TA3200R1D-SAWifi Module

BEIJING JIA AN ELECTRONIC TECHNOLOGY CO,.LTD. TA3200R1D-SA User Manual V1.0 http://www.rf-products.com Apr. 13th 2015 ————————————————————————————————————————————— - 1 - TA3200R1D-SA User Manual V1.0 BEIJING JIA AN ELECTRONIC TECHNOLOGY CO,.LTD. BEIJING JIA AN ELECTRONIC TECHNOLOGY CO,.LTD. TA3200R1D-SA User Manual V1.0 http://www.rf-products.com Apr. 13th 2015 ————————————————————————————————————————————— - 2 - Date Revision Description Apr.13th 2015 V1.0 BEIJING JIA AN ELECTRONIC TECHNOLOGY CO,.LTD. TA3200R1D-SA User Manual V1.0 http://www.rf-products.com Apr. 13th 2015 ————————————————————————————————————————————— - 3 - Description TA3200R1D-SA Module is a low-power module includes an 802.11 b/g/n radio, baseband, and MAC, which is designed for the application of wireless network communication with embedded technology. Using this module user can connect physical device to Wi-Fi Network, and then realize the control and management of the Internet of Things. The core of the module is CC3200 launched by TI. CC3200 device is a wireless MCU that integrates a high-performance ARM Cortex-M4 core running at 80MHz, includes embedded TCP/IP and TLS/SSL stacks, HTTP Server, and multiple Internet protocols, allowing customers to develop an entire application with a single IC. Features  ARM Cortex -M4 Core at 80 MHz ARM Core  includes a wide variety of peripherals  Wi-Fi and Internet Protocols in ROM  802.11 b/g/n Radio, Baseband, Medium Access Control (MAC), Wi-Fi Driver, and Supplicant  Station, AP, and Wi-Fi Direct Modes  TX Power: 18.0 dBm @ 1 DSSS 14.5 dBm @ 54 OFDM  RX Sensitivity: -95.7 dBm @ 1 DSSS -74.0 dBm @ 54 OFDM  Power-Management Subsystem: V BATWide-Voltage Mode: 2.2 to 3.6 V Preregulated 1.85-V Mode  Advanced Low-Power Modes: Hibernate: 4μA Low-Power Deep Sleep (LPDS):120μA RX Traffic:59 mA@ 54OFDM TX Traffic:229 mA @54 OFDM @18dBm  Ambient Temperature Range: -25 ~+75°C  Package：18.22mm*26.65mm*2.8mm Applications Cloud Connectivity Home Automation Home Appliances Access Control Security Systems Smart Energy Internet Gateway Industrial Control Smart Plug and Metering Wireless Audio IP Network Sensor Nodes For more details about the CC3200 please visit CC3200 at http://www.ti.com/product/CC3200 Contact details BEIJING JIA AN ELECTRONIC TECHNOLOGY CO,.LTD. TA3200R1D-SA User Manual V1.0 http://www.rf-products.com Apr. 13th 2015 ————————————————————————————————————————————— - 4 - For more information, please send email to us. Email ： [email protected] [email protected] Pin Description Pad Number Pin Name Description CC3200 Pkg pin number 1 GND Ground 65 2 ANTSEL1 Antenna Selection Control 29 3 ANTSEL2 Antenna Selection Control 30 4 nRESET Master chip reset. Active low 32 5 SOP2 Sense On Power 2 21 6 SOP1 Sense On Power 1 34 7 SOP0 Sense On Power 0 35 8 NC 9 NC 10 NC 11 GND Ground 65 12 GND Ground 65 13 VBT_CC Chip Supply Voltage (VBAT) 10,37,39,44,54 14 VDD_ANA2 ANA2 DCDC O 47 15 GPIO_30 General-Purpose I/O 53 1 16 17 28 29 44 18.22mm 26.65mm BEIJING JIA AN ELECTRONIC TECHNOLOGY CO,.LTD. TA3200R1D-SA User Manual V1.0 http://www.rf-products.com Apr. 13th 2015 ————————————————————————————————————————————— - 5 - 16 GPIO_31 General-Purpose I/O 45 17 GND Ground 65 18 GPIO_00 General-Purpose I/O 50 19 GPIO_01 General-Purpose I/O 55 Pad Number Pin Name Description CC3200 Pkg pin number 20 GPIO_02 General-Purpose I/O 57 21 GPIO_03 General-Purpose I/O 58 22 GPIO_04 General-Purpose I/O 59 23 GPIO_05 General-Purpose I/O 60 24 GPIO_06 General-Purpose I/O 61 25 GPIO_07 General-Purpose I/O 62 26 GPIO_08 General-Purpose I/O 63 27 GPIO_09 General-Purpose I/O 64 28 GND Ground 65 29 GND Ground 65 30 GPIO_10 General-Purpose I/O 1 31 GPIO_11 General-Purpose I/O 2 32 GPIO_12 General-Purpose I/O 3 33 GPIO_13 General-Purpose I/O 4 34 GPIO_14 General-Purpose I/O 5 35 GPIO_15 General-Purpose I/O 6 36 GPIO_16 General-Purpose I/O 7 37 GPIO_17 General-Purpose I/O 8 38 GPIO_22 General-Purpose I/O 15 39 JTAG_TDI JTAG TDI. Reset Default Pinout. 16 40 JTAG_TDO JTAG TDO. Reset Default Pinout 17 41 GPIO_28 General-Purpose I/O 18 42 JTAG_TCK JTAG/SWD TCK Reset Default Pinout 19 43 JTAG_TMS JTAG/SWD TMS Reset Default Pinout 20 44 GND Ground 65 BEIJING JIA AN ELECTRONIC TECHNOLOGY CO,.LTD. TA3200R1D-SA User Manual V1.0 http://www.rf-products.com Apr. 13th 2015 ————————————————————————————————————————————— - 6 - Application Information V BAT Wide-Voltage Mode 2.2 to 3.6 V Noted: The device can draw up to 600mA for 25mS. Consider adding extra decoupling capacitors if the battery can not source the current. And please also make sure these two capacitors are closed to the port of VBT_CC. VBT_CC VDD_ANA2 100μF 100μF 2.2 — 3.6V BEIJING JIA AN ELECTRONIC TECHNOLOGY CO,.LTD. TA3200R1D-SA User Manual V1.0 http://www.rf-products.com Apr. 13th 2015 ————————————————————————————————————————————— - 7 - Antenna Style TA3200R1D-SA(PCB Strip Antenna) The TA3200R1D-SA module is designed to comply with the FCC statement. FCC ID is VVJ-TA3200R1D-SA. The host system using TA3200R1D-SA, should have label indicated it contain modular’s FCC ID VVJ-TA3200R1D-SA. This radio module must not installed to co-locate and operating simultaneously with other radios in host system , additional testing and equipment authorization may be required to operating simultaneously with other radio. FCC STATEMENT § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for complia nce could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B dig ital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea sonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in a ccordance with the instructions, may ca…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Beijing Jia An Electronic Technology Co,. Ltd 2014.12.20 To: SIEMIC, Inc. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ____ Beijing Jia An Electronic Technology Co,. Ltd _____hereby authorize SIEMIC, Inc. to act as Certification Body for certifying for the following project(s): Product description： Wifi Module Model name： TA3200R1D-SA FCC ID：VVJ-TA3200R1D-SA Sincerely, Client’s signature ： Client’s name / title ：Helen BAN/ General Manager Contact information / address ：Beijing Jia An Electronic Technology Co,. Ltd No.19 GuCheng West Street, Shi Jing Shan District, Beijing 100043,CHINA

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 Beijing Jia An Electronic Technology Co,. Ltd 2014.12.20 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: VVJ-TA3200R1D-SA We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name & title : Helen BAN/ General Manager Contact information / address: Beijing Jia An Electronic Technology Co,. Ltd No.19 GuCheng West Street, Shi Jing Shan District, Beijing 100043,CHINA

SCS-F26 Modular Approval Letter Page 1 of 3 Rev 9.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Modular Approval Declaration Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (Obsolete) 1.0 1.0 Dec-04-2006 Added IC Modular Letter (Obsolete) 1.0 2.0 Feb 16 2009 Add LMA and MA option (Obsolete) 2.0 3.0 April 14 2010 Revised per RSS Gen issue 3.0 (Obsolete) 3.0 4.0 Jan 12 2011 Removed Foot(2) (obsolete) 4.0 5.0 July 19 2011 Adding New note per KDB996369 D01 V01R03 (obsolete) 5.0 6.0 August 29 2011 Updated company template & Added text box (obsolete) 6.0 7.0 Jan-31-2012 Updated modular requirement (obsolete) 7.0 8.0 Sept 05 2014 Updated template to meet RSP 100 issue 10 (current) 8.0 9.0 Nov 20 2014 SCS-F26 Modular Approval Letter Page 2 of 3 Rev 9.0 Beijing Jia An Electronic Technology Co,. Ltd (Date) nov. 12th, 2014 (Product name) FCC ID : VVJ-TA3200R1D-SA , is seeking FCC Authorization as a Single Modular transmitter / Single Limited Modular Approval (Please check one). The EUT meets the requirements for Single Modular approval / Single Limited Modular Approval (please check one) as detailed in FCC public Notice DA00-1407. Compliance to each of the requirements is described below : Questions are: * Please provide a detailed explanation if the answer is “No.” Item Modular requirement Yes No 1 The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly; √ 2 The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal; √ 3 The module must contain power supply regulation on the module; √ 4 The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b); √ 5 The module must demonstrate compliance in a stand-alone configuration; √ 6 The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements); √ 7 The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee; √ 8 The module must comply with RF exposure requirements √ Note: (1) LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured. (2) Please provide Clear and specific instructions describing the conditions, limitations and procedures for third-parties to use and/or integrate the module into a host device. (3) For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description of how such control is implemented to ensure prevention of third party modification must be provided (see KDB 594280). Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand-alone unit, complies with all applicable technical standards. Client’s signature Client’s name / title ： Helen BAN/ General Manager Contact information / address ： Beijing Jia An Electronic Technology Co,. Ltd No.19 GuCheng West Street, Shi Jing Shan District, Beijing 100043,CHINA

Test Report No. 14021186-FCC-R1 Page 33 of 40 Annex B. EUT And Test Setup Photographs Annex B.i. Photograph EUT External Photo Front View of EUT Rear View 1 of EUT Antenna

Label Location

Wi-Fi TA3200R1D-SA FCC ID: VVJ-TA3200R1D-SA Beijing Jia An Electronic Technology Co,.Ltd. 1518 14.6mm 14.6mm

Test Report No. 14021186-FCC-R1 Page 34 of 40 Annex B.ii. Photograph EUT Internal Photo Shielding Off Front View of EUT Shielding Off Rear View of EUT

RF EXPOSURE REPORT Report No.: 14021186-FCC-H1 Supersede Report No.: N/A Applicant Beijing Jia An Electronic Technology Co,. Ltd Product Name Wifi Module Model No. TA3200R1D-SA Test Standard FCC 2.1091 Test Date April 27 to April 29, 2015 Issue Date April 29, 2015 Test Result Pass Fail Equipment complied with the specification Equipment did not comply with the specification William Long Test Engineer Herve Idoko Checked By This test report may be reproduced in full only Test result presented in this test report is applicable to the tested sample only Issued by: SIEMIC (Nanjing-China) Laboratories 2-1 Longcang Avenue Yuhua Economic and Technology Development Park, Nanjing, China Tel:+86(25)86730128/86730129 Fax:+86(25)86730127 Email: [email protected] Test Report No. 14021186-FCC-H1 Page 2 of 10 Laboratories Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Scope USA EMC, RF/Wireless, SAR, Telecom Canada EMC, RF/Wireless, SAR, Telecom Taiwan EMC, RF, Telecom, SAR, Safety Hong Kong RF/Wireless, SAR, Telecom Australia EMC, RF, Telecom, SAR, Safety Korea EMI, EMS, RF, SAR, Telecom, Safety Japan EMI, RF/Wireless, SAR, Telecom Singapore EMC, RF, SAR, Telecom Europe EMC, RF, SAR, Telecom, Safety Test Report No. 14021186-FCC-H1 Page 3 of 10 This page has been left blank intentionally. Test Report No. 14021186-FCC-H1 Page 4 of 10 CONTENTS 1 REPORT REVISION HISTORY ....................................................................................................................................... 5 2 CUSTOMER INFORMATION ......................................................................................................................................... 5 3 TEST SITE INFORMATION ............................................................................................................................................ 5 4 EQUIPMENT UNDER TEST (EUT) INFORMATION ......................................................................................................... 6 5 FCC §2.1091 - MAXIMUM PERMISSIBLE EXPOSURE (MPE) .......................................................................................... 7 Test Report No. 14021186-FCC-H1 Page 5 of 10 1 Report Revision History Report No. Report Version Description Issue Date 14021186-FCC-H1 NONE Original April 29, 2015 2 Customer information Applicant Name Beijing Jia An Electronic Technology Co,. Ltd Applicant Add No.19 GuCheng West Street, Shi Jing Shan District, Beijing 100043,CHINA Manufacturer Beijing Jia An Electronic Technology Co,. Ltd Manufacturer Add No.19 GuCheng West Street, Shi Jing Shan District, Beijing 100043,CHINA 3 Test site information Lab performing tests SIEMIC (Nanjing-China) Laboratories Lab Address 2-1 Longcang Avenue Yuhua Economic and Technology Development Park, Nanjing, China FCC Test Site No. 986914 IC Test Site No. 4842B-1 Test Software Labview of SIEMIC version 1.0 Test Report No. 14021186-FCC-H1 Page 6 of 10 4 Equipment under Test (EUT) Information Description of EUT: Wifi Module Main Model: TA3200R1D-SA Serial Model: N/A Date EUT received: November 10, 2014 Test Date(s): April 27 to April 29, 2015 Output power 16.19 dBm (41.59mW) Antenna Gain: PCB Antenna Gain: 1dBi Type of Modulation: 802.11b/g/n: DSSS/OFDM RF Operating Frequency (ies): 802.11b/g/n(20M): 2412-2462 MHz(TX/RX) Number of Channels: 802.11b/g/n(20M): 11CH Port: N/A Input Power: DC 3.3V Trade Name : N/A FCC ID: VVJ-TA3200R1D-SA Test Report No. 14021186-FCC-H1 Page 7 of 10 5 FCC §2.1091 - MaximuM Permissible exposure (MPE) Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Test Data Predication of MPE limit at a given distance Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Test Report No. 14021186-FCC-H1 Page 8 of 10 Type Test mode CH Freq (MHz) Conducted Power (dBm) Tune Up Power (dBm) Output power 802.11b Low 2412 15.96 15.5±1 Mid 2437 16.19 High 2462 15.23 802.11g Low 2412 11.34 11.5±1 Mid 2437 12.17 High 2462 11.17 802.11n(20M) Low 2412 10.16 10.5±1 Mid 2437 11.22 High 2462 9.77 For the antenna manufacturer provide only used limited to ERP/EIRP or radiated spurious emission test. The MPE evaluation as below: 802.11b The maximum peak output power (turn-up power) in low channel of WIFI is 16.5 dBm Maximum peak output power (turn-up power) at antenna input terminal: 44.67 (mW) Prediction distance: >20 (cm) Predication frequency: 2412(MHz) lowest f…

Text truncated - open the document above for the full version.

RF TEST REPORT Report No.: 14021186-FCC-R1 Supersede Report No.: N/A Applicant Beijing Jia An Electronic Technology Co,. Ltd Product Name Wifi Module Main Model TA3200R1D-SA Test Standard FCC Part 15.247: 2014, ANSI C63.10: 2013 Test Date April 27 to April 29, 2015 Issue Date April 29, 2015 Test Result Pass Fail Equipment complied with the specification Equipment did not comply with the specification William Long Test Engineer Herve Idoko Checked By This test report may be reproduced in full only Test result presented in this test report is applicable to the tested sample only Issued by: SIEMIC (Nanjing-China) Laboratories 2-1 Longcang Avenue Yuhua Economic and Technology Development Park, Nanjing, China Tel:+86(25)86730128/86730129 Fax:+86(25)86730127 Email: [email protected] Test Report No. 14021186-FCC-R1 Page 2 of 40 Laboratories Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management throughout a project. Our extensive experience with China, Asia Pacific, North America, European, and International compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Scope USA EMC, RF/Wireless, SAR, Telecom Canada EMC, RF/Wireless, SAR, Telecom Taiwan EMC, RF, Telecom, SAR, Safety Hong Kong RF/Wireless, SAR, Telecom Australia EMC, RF, Telecom, SAR, Safety Korea EMI, EMS, RF, SAR, Telecom, Safety Japan EMI, RF/Wireless, SAR, Telecom Singapore EMC, RF, SAR, Telecom Europe EMC, RF, SAR, Telecom, Safety Test Report No. 14021186-FCC-R1 Page 3 of 40 This page has been left blank intentionally. Test Report No. 14021186-FCC-R1 Page 4 of 40 CONTENTS 1. REPORT REVISION HISTORY ....................................................................................................................................... 5 2. CUSTOMER INFORMATION ......................................................................................................................................... 5 3. TEST SITE INFORMATION ............................................................................................................................................ 5 4. EQUIPMENT UNDER TEST (EUT) INFORMATION ......................................................................................................... 6 5. TEST SUMMARY .......................................................................................................................................................... 7 6. MEASUREMENTS, EXAMINATION AND DERIVED RESULTS ........................................................................................ 8 6.1 RF EXPOSURE ................................................................................................................................................................ 8 6.2 ANTENNA REQUIREMENT ............................................................................................................................................... 9 6.3 DTS (6 DB&20 DB) CHANNEL BANDWIDTH .................................................................................................................... 10 6.4 MAXIMUM OUTPUT POWER .......................................................................................................................................... 16 6.5 POWER SPECTRAL DENSITY ........................................................................................................................................ 20 6.6 BAND-EDGE & UNWANTED EMISSIONS INTO NON-RESTRICTED FREQUENCY BANDS ................................................ 24 6.7 AC POWER LINE CONDUCTED EMISSIONS ................................................................................................................... 27 6.8 RADIATED SPURIOUS EMISSIONS ................................................................................................................................ 28 ANNEX A. TEST INSTRUMENT ........................................................................................................................................... 32 ANNEX B. EUT AND TEST SETUP PHOTOGRAPHS ........................................................................................................... 33 ANNEX C. TEST SETUP AND SUPPORTING EQUIPMENT ................................................................................................... 36 ANNEX D. USER MANUAL / BLOCK DIAGRAM / SCHEMATICS / PARTLIST ........................................................................ 39 ANNEX E. DECLARATION OF SIMILARITY ......................................................................................................................... 40 Test Report No. 14021186-FCC-R1 Page 5 of 40 1. Report Revision History Report No. Report Version Description Issue Date 14021186-FCC-R1 NONE Original April 29, 2015 2. Customer information Applicant Name Beijing Jia An Electronic Technology Co,. Ltd Applicant Add No.19 GuCheng West Street, Shi Jing Shan District, Beijing 100043,CHINA Manufacturer Beijing Jia An Electronic Technology Co,. Ltd Manufacturer Add No.19 GuCheng West Street, Shi Jing Shan District, Beijing 100043,CHINA 3. Test site information Lab performing tests SIEMIC (Nanjing-China) Laboratories Lab Address 2-1 Longcang Avenue Yuhua Economic and Technology Development Park, Nanjing, China FCC Test Site No. 986914 IC Test Site No. 4842B-1 Test Software Labview of SIEMIC version 1.0 Test Report No. 14021186-FCC-R1 Page 6 of 40 4. Equipment under Test (EUT) Information Description of EUT: Wifi Module Main Model: TA3200R1D-SA Serial Model: N/A Date EUT received: November 10, 2014 Test Date(s): April 27…

Text truncated - open the document above for the full version.

Test Report No. 14021186-FCC-R1 Page 36 of 41 Annex B.iii. Photograph: Test Setup Photo Radiated Spurious Emissions Test Setup Below 1GHz Radiated Spurious Emissions Test Setup Above 1GHz