VZ9110002Access Point

EAP110 V1.10 Enterprise Access Point Quick Installation Guide EAP110 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. i Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations. All rights reserved. To download up-to-date version, please visit www.4ipnet.com. Quick Installation Guide EAP110 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. ii FCC CAUTION This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. The device contains a low power transmitter which will send out Radio Frequency (RF) signal when transmitting. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Quick Installation Guide EAP110 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. iii CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: EAP110 For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328 : • EMF: EN 50385:2002 • EMC: EN 301.489-1, EN 301.489-17 • Safety: EN 60950-1 + A11, Caution: ƒ This declaration is only valid for configurations (combinations of software, firmware, and hardware) provided and supported by 4IPNET, Inc. The use of software or firmware not provided and supported by 4IPNET, Inc. may result in the equipment no longer being compliant with the regulatory requirements. European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835 GHz. This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact your local regulatory authority for compliance. Taiwan NCC Statement 根據NCC低功率電波輻射性電機管理辦法 規定: 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或 變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時應立即停用，並改善至 無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之擾。 Quick Installation Guide EAP110 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. 1 Preface Package Contents 4ipnet EAP110 is a high-end 802.11n/b/g 2.4GHz MIMO Access Point (AP) with the best price/ performance for wireless connectivity in enterprise and industrial applications and is compliant with the latest industrial wireless security standards. EAP110 makes the wireless communication fast, secure and easy. It supports business grade security such as IEEE802.1X, and Wi-Fi Protected Access (WPA and WPA2). EAP110 also features multiple ESSIDs with VLAN tags and multiple Virtual APs; great for enterprise applications, such as separating the traffics of different departments using different ESSIDs. The PoE LAN port can receive power from Power over Ethernet (PoE) sourcing device. Its metal case is IP50 anti-dust compliant, which means that EAP110 is well suited to WLAN deployment in industrial environments. This Quick Installation Guide provides instructions and reference materials for getting started with 4ipnet EAP110. 1. 4ipnet EAP110 x 1 2. Quick Installation Guide (QIG) x 1 3. CD-ROM (with User’s Manual and QIG) x 1 4. Power Adapter (DC 5V) x 1 5. Antenna x 2 It is recommended to keep the original packing material for possible future shipment when repair or maintenance is required. Any returned product should be packed in its original packaging to prevent damage during delivery. Network Layout with EAP110s Quick Installation Guide EAP110 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. 2 System Overview Connector Panel EAP110 Connector Panel 1 5V 1A Attach the power adapter here. 2 LAN(PoE) Attach the Ethernet cable here for connecting to wired local network. This port supports PoE as well which can be connected to a PSE (power sourcing equipment) as an alternative power sourcing. 3 WES Press to start running WES process. WES Role Master (Press for more than 3 seconds until the WLAN LED blinks twice and then release) Slave (Press once until the WLAN LED starts blinki…

Text truncated - open the document above for the full version.

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C3 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 Model No. : EAP110v1 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C4 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C5 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C6 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C7 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C8 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C15 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 Model No. : EAP110 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C16 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C17 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C18 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C19 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : C20 OF C24 TEL : 886-2-2696-2468 ISSUED DATE : Sep. 02, 2011 FAX : 886-2-2696-2255

Page No. : A1 of A3 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Appendix A. Maximum Permissible Exposure Page No. : A2 of A3 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) = d GP30 Power Density: Pd (W/m²) = 377 2 E E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 377 30 d GP   From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Page No. : A3 of A3 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI 1.3. Calculated Result and Limit Antenna Type : Dipole Antenna Max Conducted Power for IEEE 802.11n: 17.85dBm Test Mode Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 2.4G 20 3 1.995262 14.59 28.7740 0.0114

Page No. : A1 of A3 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AC Appendix A. Maximum Permissible Exposure Page No. : A2 of A3 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AC 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) = d GP30 Power Density: Pd (W/m²) = 377 2 E E = Electric field (V/m) P = Peak RF output power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = 2 377 30 d GP   From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Page No. : A3 of A3 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AC 1.3. Calculated Result and Limit Antenna Type : Dipole Antenna Max Conducted Power for IEEE 802.11b/g: 17.85dBm Test Mode Min. User Distance (cm) Gain (dBi) Numeric Gain Conducted Power (dBm) Conducted Power (mW) Power Density (mW/cm2) 2.4G 20 3 1.995262 17.85 60.9537 0.0242

SPORTON International Inc. Report Format Version: a FCC TEST REPORT Report No. : FR151735AI FCC RADIO TEST REPORT according to 47 CFR FCC Part 15 Subpart C § 15.247 Equipment : Enterprise Access Point Brand Name : 4ipnet Model No. : EAP110v1 / EAP110 Filing Type : New Application Applicant Manufacturer : 4IPNET, INC. 3F, No. 369, Fusing N. Rd., Taipei 105, Taiwan, R.O.C. FCC ID : VZ9110002 Received Date : Mar. 04, 2009 Final Test Date : Aug. 10, 2011 Statement Test result included is only for the 802.11n of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. SPORTON International Inc. No. 52 Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON International Inc. Page No. : i of ii TEL : 886-2-2696-2468 Issued Date : Sep. 05, 2011 FAX : 886-2-2696-2255 FCC ID : VZ9110002 FCC TEST REPORT Report No. : FR151735AI Table of Contents 1 SUMMARY OF THE TEST RESULT ....................................................................................................................... 2 2 GENERAL INFORMATION ...................................................................................................................................... 3 2.1 Product Details .........................................................................................................................................................................................3 2.2 Accessories ..............................................................................................................................................................................................3 2.3 Table for Filed Antenna ............................................................................................................................................................................3 2.4 Table for Carrier Frequencies ..................................................................................................................................................................4 2.5 Table for Test Modes ...............................................................................................................................................................................4 2.6 Table for Testing Locations ......................................................................................................................................................................4 2.7 Table for Supporting Units .......................................................................................................................................................................5 2.8 Table for Parameters of Test Software Setting ........................................................................................................................................5 2.9 EUT Operation during Test ......................................................................................................................................................................5 2.10 Test Configuration ....................................................................................................................................................................................6 3 TEST RESULT ......................................................................................................................................................... 9 3.2 Maximum Conducted Output Power Measurement ...............................................................................................................................19 3.3 Power Spectral Density Measurement ...................................................................................................................................................22 3.4 6dB Spectrum Bandwidth Measurement ...............................................................................................................................................28 3.5 Radiated Emissions Measurement ........................................................................................................................................................34 3.6 Band Edge and Fundamental Emissions Measurement ........................................................................................................................58 3.7 Antenna Requirements ..........................................................................................................................................................................63 4 LIST OF MEASURING EQUIPMENTS .................................................................................................................. 64 5 TEST LOCATION ................................................................................................................................................... 69 6 TAF CERTIFICATE OF ACCREDITATION ........................................................................................................... 70 APPENDIX A. MAXIMUM PERMISSIBLE EXPOSURE ................................................................................. A1 ~ A3 APPENDIX B. TEST PHOTOS ...................................................................................................................... B1 ~ B16 APPENDIX C. PHOTOGRAPHS OF EUT ..................................................................................................... C1 ~ C24 SPORTON International Inc. Page No. : ii of ii TEL : 886-2-2696-2468 Issued Date : Sep. 05, 2011 FAX : 886-2-2696-2255 FCC ID : VZ9110002 FCC TEST REPORT Report No. : FR151735AI H…

Text truncated - open the document above for the full version.

SPORTON International Inc. Report Format Version: a FCC TEST REPORT Report No. : FR151735AC FCC RADIO TEST REPORT according to 47 CFR FCC Part 15 Subpart C § 15.247 Equipment : Enterprise Access Point Brand Name : 4ipnet Model No. : EAP110v1 / EAP110 Filing Type : New Application Applicant Manufacturer : 4IPNET, INC. 3F, No. 369, Fusing N. Rd., Taipei 105, Taiwan, R.O.C. FCC ID : VZ9110002 Received Date : Mar. 04, 2009 Final Test Date : Aug. 10, 2011 Statement Test result included is only for the 802.11b/g part of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. SPORTON International Inc. No. 52 Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON International Inc. Page No. : i of ii TEL : 886-2-2696-2468 Issued Date : Sep. 05, 2011 FAX : 886-2-2696-2255 FCC ID : VZ9110002 FCC TEST REPORT Report No. : FR151735AC Table of Contents 1 SUMMARY OF THE TEST RESULT ....................................................................................................................... 2 2 GENERAL INFORMATION ...................................................................................................................................... 3 2.1 Product Details .........................................................................................................................................................................................3 2.2 Accessories ..............................................................................................................................................................................................3 2.3 Table for Filed Antenna ............................................................................................................................................................................3 2.4 Table for Carrier Frequencies ..................................................................................................................................................................3 2.5 Table for Test Modes ...............................................................................................................................................................................4 2.6 Table for Testing Locations ......................................................................................................................................................................4 2.7 Table for Supporting Units .......................................................................................................................................................................4 2.8 Table for Parameters of Test Software Setting ........................................................................................................................................5 2.9 EUT Operation during Test ......................................................................................................................................................................5 2.10 Test Configuration ....................................................................................................................................................................................6 3 TEST RESULT ......................................................................................................................................................... 9 3.1 AC Power Line Conducted Emissions Measurement ..............................................................................................................................9 3.2 Maximum Conducted Output Power Measurement ...............................................................................................................................19 3.3 Power Spectral Density Measurement ...................................................................................................................................................21 3.4 6dB Spectrum Bandwidth Measurement ...............................................................................................................................................27 3.5 Radiated Emissions Measurement ........................................................................................................................................................33 3.6 Band Edge and Fundamental Emissions Measurement ........................................................................................................................57 3.7 Antenna Requirements ..........................................................................................................................................................................62 4 LIST OF MEASURING EQUIPMENTS .................................................................................................................. 63 5 TEST LOCATION ................................................................................................................................................... 68 6 TAF CERTIFICATE OF ACCREDITATION ........................................................................................................... 69 APPENDIX A. MAXIMUM PERMISSIBLE EXPOSURE ................................................................................. A1 ~ A3 APPENDIX B. TEST PHOTOS ...................................................................................................................... B1 ~ B16 APPENDIX C. PHOTOGRAPHS OF EUT ..................................................................................................... C1 …

Text truncated - open the document above for the full version.

Page No. : B1 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Appendix B. Test Photos Page No. : B2 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI 1 Photographs of Conducted Emissions Test Configuration Mode 1 FRONT VIEW REAR VIEW Page No. : B3 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI SIDE VIEW Page No. : B4 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Mode 2 FRONT VIEW REAR VIEW Page No. : B5 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI SIDE VIEW Page No. : B6 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Mode 3 FRONT VIEW REAR VIEW Page No. : B7 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI SIDE VIEW Page No. : B8 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Mode 4 FRONT VIEW REAR VIEW Page No. : B9 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI SIDE VIEW Page No. : B10 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI 2 Photographs of Radiated Emissions Test Configuration For radiated emissions 9kHz~30MHz FRONT VIEW REAR VIEW Page No. : B11 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI For radiated emissions 30MHz~1GHz Mode 1 FRONT VIEW REAR VIEW Page No. : B12 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Mode 2 FRONT VIEW REAR VIEW Page No. : B13 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Mode 3 FRONT VIEW REAR VIEW Page No. : B14 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Mode 4 FRONT VIEW REAR VIEW Page No. : B15 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI For radiated emissions above 1GHz Mode 1 FRONT VIEW REAR VIEW Page No. : B16 of B16 FCC ID : VZ9110002 F FCC TEST REPORT Report No. : FR151735AI Mode 3 FRONT VIEW REAR VIEW