VZ9140001ENTERPRISE ACCESS POINT

EAP767 V1.00 Enterprise Access Point Quick Installation Guide EAP767 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. i Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations. All rights reserved. To download up-to-date version, please visit www.4ipnet.com. Quick Installation Guide EAP767 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. ii FCC CAUTION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. The device contains a low power transmitter which will send out Radio Frequency (RF) signal when transmitting. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Quick Installation Guide EAP767 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. iii CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: EAP767 For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328 : • EMC: EN 301.489-1, EN 301.489-17, • EMC: EN 55022 Class B, EN 55024 : + A1 + A2 including the followings: EN 61000-3-2, EN 61000-3-3. EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 • Safety: EN 60950-1 + A11, Caution:  This declaration is only valid for configurations (combinations of software, firmware, and hardware) provided and supported by 4ipnet Inc. The use of software or firmware not provided and supported by 4ipnet Inc. may result in the equipment no longer being compliant with the regulatory requirements. European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835 GHz. This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact your local regulatory authority for compliance. Taiwan NCC Statement 根據NCC低功率電波輻射性電機管理辦法 規定: 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或 變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時應立即停用，並改善至 無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之擾。 在5.25 ~ 5.35秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。 Quick Installation Guide EAP767 Enterprise Access Point ENGLISH Copyright © 4IPNET, INC. All rights reserved. 1 Preface Package Contents 4ipnet EAP767 is a high-end, dual radio 802.11 b/g/n + ac MIMO Access Point (AP) with the best performance for business and industrial applications and is compliant with the latest industrial wireless security standards that are required in the tightly secured enterprise network environments. EAP767 makes the wireless communication fast, secure and easy. It supports business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and WPA2). The EAP767 supports multiple point-to-point wireless links to form wider wireless network coverage. EAP767 also features multiple ESSIDs with VLAN tags and multiple Virtual APs; great for enterprise applications, such as separating traffic from different departments using different ESSIDs. The PoE Uplink port is able to receive power from Power over Ethernet (PoE) sourcing devices. This Quick Installation Guide provides instructions and reference materials to get you started with 4ipnet EAP767. 1. 4ipnet EAP767 x 1 2. Quick Installation Guide (QIG) x 1 3. Wall Mount Kit x 1 4. Ceiling Mount Kit x 1 5. Torx Screwdriver x 1 It is recommended to keep the original packing material for possible future shipment when repair or maintenance is required. Any returned product should be packed in its original packaging …

Text truncated - open the document above for the full version.

Report No.: 140423C02 1 of 14 CONSTRUCTION PHOTOS OF EUT 廠牌：4ipnet ／ 型號：EAP767 Report No.: 140423C02 2 of 14 Report No.: 140423C02 13 of 14 Report No.: 140423C02 14 of 14

Report No.: 140423C02 3 of 14 Report No.: 140423C02 4 of 14 Report No.: 140423C02 5 of 14 Report No.: 140423C02 6 of 14 Report No.: 140423C02 7 of 14 Report No.: 140423C02 8 of 14 Report No.: 140423C02 9 of 14 Report No.: 140423C02 10 of 14 Report No.: 140423C02 11 of 14 Report No.: 140423C02 12 of 14

FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 1 of 8 Report No. : SA140423C02 Issued Date : May 21, 2014 FCC MPE Evaluation Report Report No. : SA140423C02 Applicant : 4IPNET, INC. Address : 3F-3, No. 369, Fusing N. Rd., Taipei 105, Taiwan, R.O.C. Product : Enterprise Access Point Brand : 4ipnet Model No. : EAP767 Standards : FCC Part 2 (Section 2.1091) KDB 447498 D01 Sample Received Date : Apr. 23, 2014 Date of Evaluation : May 14, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 2 of 8 Report No. : SA140423C02 Issued Date : May 21, 2014 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Description of Equipment Under Test ................................................................................................................................. 4 2. MPE (Maximum Permissible Exposure) Assessment ......................................................................................................... 5 2.1 Introduction .................................................................................................................................................................. 5 2.2 RF Radiation Exposure Limits ...................................................................................................................................... 5 2.3 MPE Assessment Method ............................................................................................................................................ 6 2.4 MPE Calculation for Standalone Operations ................................................................................................................ 6 3. Information on the Testing Laboratories ............................................................................................................................. 8 FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 3 of 8 Report No. : SA140423C02 Issued Date : May 21, 2014 Release Control Record Report No. Reason for Change Date Issued SA140423C02 Initial release May 21, 2014 FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 4 of 8 Report No. : SA140423C02 Issued Date : May 21, 2014 1. Description of Equipment Under Test EUT Type Enterprise Access Point Brand Name 4ipnet Model Name EAP767 Tx Frequency Bands (Unit: MHz) 2412 ~ 2462, 5180 ~ 5240, 5745 ~ 5825 Uplink Modulations 802.11b : DSSS 802.11a/g/n/ac : OFDM EUT Stage Identical Prototype Note: 1. The antenna information is listed as below. Antenna Type Antenna Model Band Frequency Band Tx Antenna Antenna Gain PCB AP331AI sercomm 2412 ~ 2462 1 4.28 2 1.34 3 2.54 5180 ~ 5240 1 4.67 2 4.1 3 3.94 5745 ~ 5825 1 4.42 2 4.5 3 3.98 2. The above EUT information is declared by manufacturer and for more detailed features description please refers to the manufacturer's specifications or User's Manual. List of Accessory: AC Adapter Brand Name Asian Model Name WA-30B12 Power Rating I/P:100-240Vac, 50-60Hz, 0.8A; O/P: 12Vdc, 2.5A DC Power Cord Type 1.5 meter shielded cable without ferrite core FCC MPE Evaluation Report Report Format Version 5.0.0 Page No. : 5 of 8 Report No. : SA140423C02 Issued Date : May 21, 2014 2. MPE (Maximum Permissible Exposure) Assessment 2.1 Introduction According to 47 CFR §2.1091, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitting antenna and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal comput…

Text truncated - open the document above for the full version.

Report No.: RF140423C02 1 of 141 Report Format Version 5.2.0 FCC TEST REPORT (15.247) REPORT NO.: RF140423C02 MODEL NO.: EAP767 FCC ID: VZ9140001 RECEIVED: Apr. 23, 2014 TESTED: Apr. 29, 2014 ~ May 08, 2014 ISSUED: May 21, 2014 APPLICANT: 4IPNET, INC. ADDRESS: 3F-3, No. 369, Fusing N. Rd., Taipei 105, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140423C02 2 of 141 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..............................................................................................................5 1. CERTIFICATION ..................................................................................................................................6 2. SUMMARY OF TEST RESULTS .........................................................................................................7 2.1 MEASUREMENT UNCERTAINTY...............................................................................................7 3. GENERAL INFORMATION ..................................................................................................................8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................8 3.2 DESCRIPTION OF TEST MODES ........................................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 11 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 15 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................... 15 3.4 DUTY CYCLE TEST SIGNAL ................................................................................................... 17 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 22 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ....................................................................... 23 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 23 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................... 23 4.1.2 TEST INSTRUMENTS ................................................................................................. 24 4.1.3 TEST PROCEDURES ................................................................................................. 25 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 25 4.1.5 TEST SETUP ............................................................................................................... 26 4.1.6 EUT OPERATING CONDITIONS ................................................................................ 27 4.1.7 TEST RESULTS........................................................................................................... 28 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................... 49 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 49 4.2.2 TEST INSTRUMENTS ................................................................................................. 49 4.2.3 TEST PROCEDURES ................................................................................................. 50 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................... 50 4.2.5 TEST SETUP ............................................................................................................... 51 4.2.6 EUT OPERATING CONDITIONS ................................................................................ 51 4.2.7 TEST RESULTS........................................................................................................... 52 4.3 6dB BANDWIDTH MEASUREMENT ....................................................................................... 56 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................................ 56 4.3.2 TEST SETUP ............................................................................................................... 56 4.3.3 TEST INSTRUMENTS ................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF140423C02 1 PHOTOGRAPHS OF THE TEST CONFIGURATION SAMPLE A CONDUCTED EMISSION TEST (For WLAN 2.4GHz) Report No.: RF140423C02 2 CONDUCTED EMISSION TEST (For WLAN 5GHz) Report No.: RF140423C02 3 SAMPLE B CONDUCTED EMISSION TEST (For WLAN 2.4GHz) Report No.: RF140423C02 4 CONDUCTED EMISSION TEST (For WLAN 5GHz) Report No.: RF140423C02 5 SAMPLE A RADIATED EMISSION TEST Report No.: RF140423C02 6 RADIATED EMISSION TEST Report No.: RF140423C02 7 SAMPLE B RADIATED EMISSION TEST