W59XAP1040XAP Access Point

luxul.com Simply Connected User Guide XAP-1040 Luxul Xen™ High Performance Outdoor 802.11b/g/n Wireless Access Point Use the XAP-1040 to: „„ Provide„a„High„Performance„Outdoor„802.11n„Wi-Fi„Network„„ „„ Setup„a„Superior„Point-to-Point„or„Point-to-Multipoint„Bridge„Link„ „„ Increase„Mobile„Client„Device„Network„Sensitivity„and„Performance „„ Simplify„Installation„While„Minimizing„Setup„Time„and„Expense„ „„ Eliminate„Client„Device„Roaming„Issues AP User Guide 2 © Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders. LUXUL Xen™ HiGH PerfOrmAnce OUtdOOr 802.11b/g/n„Wireless„Access„Point Model„Number:„XAP-1040„ FCC„ID:„W59XAP1040„ IC:„8584A-XAP1040 USER„GUIDE ©„2011„„Luxul.„All„Rights„Reserved. No„part„of„this„publication„may„be„modified„or„adapted„in„any„way,„for„any„ purposes„without„permission„in„writing„from„Luxul.„The„material„in„this„manual„ is„subject„to„change„without„notice.„Luxul„reserves„the„right„to„make„changes„to„ any„product„to„improve„reliability,„function,„or„design.„No„license„is„granted,„either„ expressly„or„by„implication„or„otherwise„under„any„Luxul„intellectual„property„rights.„ An„implied„license„only„exists„for„equipment,„circuits„and„subsystems„contained„in„ this„or„any„Luxul„product.„ This„product„is„covered„by„one„or„more„U.S.„and„foreign„patents„Patents:„7,379,717,„ 6,606,075,„6,373,448,„other„patents„pending dOcUment cOnventiOns The„following„graphical„alerts„are„used„in„this„document„to„indicate„notable„situations: „ NOTE:„„Tips,„hints,„or„special„requirements„that„you„should„take„note„of. „ CAUTION:„„Care„is„required.„Disregarding„a„caution„can„result„in„data„ loss„or„equipment„malfunction. „ WARNING!: Indicates„a„condition„or„procedure„that„could„result„in„ personal„injury„or„equipment„damage. fcc cOmPLiAnce This„device„complies„with„Part„15„of„the„FCC„Rules.„Operation„is„subject„to„the„ following„two„conditions:„(1)„this„device„may„not„cause„harmful„interference,„and„(2)„ this„device„must„accept„any„interference„received,„including„interference„that„may„ cause„undesired„operation. luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460 User Guide 3 cOntents 1 intrOdUctiOn 4 1.1 Warnings 5 1.2 Site Preparation 5 2 XAP-1040 sPecificAtiOns 6 3 GettinG stArted 7 3.1 System Requirements 7 3.2 Package Contents 7 3.3 Safety Information 8 4 HArdWAre feAtUres And instALLAtiOn 8 4.1 Front View 8 4.2 Rear View 9 4.3 Bottom View 9 4.4 Inside View 10 4.5 Environmental Requirements 12 4.6 Hardware Installation 13 5 cOnfiGUrAtiOn 16 5.1 Login 16 5.2 Quick Setup 17 5.3 WireLess 20 5.4 Maintenance 23 5.6 Status 26 6 reGULAtOry cOmPLiAnce 28 6.1 Health and Safety Recommendations 28 6.2 RF Exposure Guidelines 28 6.3 Radio Frequency Interference Requirements—FCC 29 6.4 Radio Transmitters (Part 15) 30 6.5 Industry Canada (RSS-Gen Issue 2) 30 APPendiX 1: tecHnicAL sUPPOrt 31 User Guide 4 © Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders. 1 InTRodUCTIon Congratulations„on„your„purchase„of„the„Luxul„Xen™„High„Performance„Outdoor„ 802.11n„Wireless„Access„Point„(XAP-1040).„The„XAP-1040„provides„superior„Wi-Fi„ coverage„for„outdoor„areas„while„maintaining„an„unobtrusive„profile„for„use„in„ residential„and„commercial„Wi-Fi„installations.„The„ruggedly„elegant„XAP-1040„is„ weather„resistant„to„IP-66„specifications„and„can„be„installed„directly„on„a„wall„or„ on„a„pole„with„the„included„mounting„bracket.„It„is„also„an„excellent„solution„for„ creating„a„point-to-point„or„point-to-multipoint„bridge„link.„Powered„by„Luxul’s„ Xen3D™„Technology,„the„XAP-1040„enhances„data„throughput„and„coverage„by„as„ much„as„400%„over„traditional„Wi-Fi„gear,„providing„for„superior„area„coverage„ and„a„farther„reaching„signal.„With„this„high„performance„wireless„access„point,„ computers„and„wireless„devices„that„are„compatible„with„802.11b/g„and/or„802.11n„ can„sustain„maximum„data„rates„and„improved„overall„performance„at„significantly„ greater„distances.„ The„XAP-1040„features„Luxul’s„XenSmart™„web„based„management„interface.„ XenSmart„provides„a„powerful,„yet„simple„method„for„setting„up„and„optimizing„ the„wireless„network.„The„XAP-1040„is„also„XenConnect™„enabled„for„optimal„per- formance„and„installation„simplicity„when„deployed„together„with„Luxul„Routers,„ Gigabit„Switches,„and„other„Luxul„products.„ XAP-1040 Features: „X Implements„Patented„Xen3D™„Technology„for„Enhanced„Throughput„and„ Coverage „X Highest„FCC„Approved„Performance„(Effective„EIRP„36dBm)„for„Farther„Reaching„ Signal„and„Maximum„Data„Rates„ „X 18dB„of„Receive„Gain„Increases„Client„Device„Network„Sensitivity„and„ Performance „X Complies„with„2.4„GHz„IEEE„802.11n„Standard.„Backward„Compatible„with„IEEE„ 802.11g/b„ „X Supports„WMM„QoS„Functionality„to„Prioritize„Multimedia„Traffic„ „X Enhanced„Multi-Level„Security„with„WPA-PSK„(TKIP,„AES,„TKIP„&„AES),„WPA2-PSK„ (AES),„WPA-PSK/WPA2-PSK„Personal„(TKIP„&„AES)„and„128-bit„WEP„ „X Supports„up„to„8„SSIDs„with„Individual„Security„Settings „X Multiple„SSIDs„Support„VLAN„Tagging„(1„VLAN„per„SSID) „X Single„Cable„Installation„with„PoE„(supports„both„IEEE„802.3af„and„Legacy)„ „X Firmware„Upgradeable„ „X Easy„3„Step„Setup„through„Web-based„XenSmart™„User„Interface luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460 User Guide 5 „X Weather„Resistant„IP-66„Compliant„Enclosure„ „X Installs„Directly„on„an„Outdoor„Wall„or„on„a„Pole„Using„Adjustable„Mounting„ Bracket „X XenConnect™„Enabled„for„Maximum„Compatibility„and„Performance„with„Other„ Luxul„Xen„Products 1.1 Warnings „X Read„all„installation„instructions„and„site„survey„reports,„and„verify„correct„equip- ment„installation„before„connecting„the„XAP-1040„to„its„power„source. „X Remove„jewelry„and„watches„before„installing„this„equipment. „X Verify„that„the„unit„is„grounded„before„connecting„it„to„the„power„source. „X Verify„that„any„device„conne…

Text truncated - open the document above for the full version.

Front VView of the E EUT Back VView of the E EUT

Reear Cover Reemoved Showwing Antenn na Mountingg and Coax View oof the Anten nna View oof the Compponent Side oof the PCB w with RF Shieelding in Pla ace View of the Componnents Under the RF Shieelding VView of the TTrace Side of f the PCB

RF Exposure Evaluation Declaration Product Name: Xen 802.11bgn Access Point Model Number: XAP-1040 FCC ID: W59XAP1040 Applicant: Luxul Wireless Address: 357 S 670 W Suite 160 Lindon UT 84042 USA Date of Declaration: 15 Aug 2011 The declaration results relate only to the samples calculated. RF Exposure Evaluation Limits Per FCC 1.1310 Table 1B, the maximum permissible RF exposure for an uncontrolled environment is 1 mW/cm 2 for the frequencies used in this device. The worst-case power for the antenna at the center frequency of the band of operation is used for the calculation below. The power density at a 20 cm distance is shown for each of the antenna options. As shown, the calculated power density is below the FCC’s limit for Class B exposure of 1mW/cm 2 . The actual power density for the EUT calculated as shown below. Pd=(Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and the center of the radiator in cm NOTICE: Radiation Exposure Statement This equipment shall only be installed and operated with the antenna types shown above and installed with a minimum of 20 cm of separation distance between the antenna and all persons during normal operation. Frequency A ntennaModulationA ntennaNumericPowerSeparationPower Density MHzTypeType Max Linear Gain (dBi)Ga in( mW )Dis t a n c e ( c m) (mw/cm 2 ) 2437Patch11b4.02.5916.22200.4579 2437Patch11g4.02.5959.40200.4772 2437Patch11n4.02.5959.40200.4794

T June Nemko 1940 West Salt Lake 80 Tes Ce X F W5 Test S FCC PAR Test Report S A Lux 357 South 6 Lindo Da e 27 – 29, 20 Issue Dat Accredited T NVLAP L o-CCL, t Alexander e City, UT 8 1-972-6146 st Report ertification Test Of: XAP-1040 FCC ID: 59XAP1040 Specification RT 15, Subp Serial No: 18 Applicant: xul Wireless 670 West, Su on, UT 8404 ate of Test: 011 and July e: August 1 , Testing Laborat Lab Code 1002 Inc. Street 84119 ns: part C 80885-2.1 uite 160 42 5 & 6, 2011 , 2011 atory By: 272-0 1 Nemko-CCL, Inc. TEST REPORT: 180885-2.1 FCC ID#: W59XAP1040 Page 2 of 85 CERTIFICATION OF ENGINEERING REPORT This report has been prepared by Nemko-CCL, Inc. to document compliance of the device described below with the requirements of Federal Communications Commission (FCC) Part 15, Subpart C. This report may be reproduced in full, partial reproduction may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested. - Applicant: Luxul Wireless - Manufacturer: Luxul Wireless - Brand Name: Luxul - Model Number: XAP-1040 - FCC ID Number: W59XAP1040 On this 1 st day of August 2011, I, individually, and for Nemko-CCL, Inc., certify that the statements made in this engineering report are true, complete, and correct to the best of my knowledge, and are made in good faith. Although NVLAP has recognized that the Nemko-CCL, Inc. EMC testing facilities are in good standing, this report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. Nemko-CCL, Inc. Tested by: Norman P. Hansen EMC Technician Nemko-CCL, Inc. TEST REPORT: 180885-2.1 FCC ID#: W59XAP1040 Page 3 of 85 TABLE OF CONTENTS PAGE SECTION 1.0 CLIENT INFORMATION .................................................................................4 SECTION 2.0 EQUIPMENT UNDER TEST (EUT) ..................................................................5 SECTION 3.0 TEST SPECIFICATION, METHODS & PROCEDURES .............................8 SECTION 4.0 OPERATION OF EUT DURING TESTING ..................................................14 SECTION 5.0 SUMMARY OF TEST RESULTS ...................................................................15 SECTION 6.0 MEASUREMENTS, EXAMINATIONS AND DERIVED RESULTS ..........16 APPENDIX 1 TEST PROCEDURES AND TEST EQUIPMENT ..........................................66 APPENDIX 2 PHOTOGRAPHS ................................................................................................74 APPENDIX 3 MANUFACTURER’S STATEMENT/ATTESTATION .................................85 Nemko-CCL, Inc. TEST REPORT: 180885-2.1 FCC ID#: W59XAP1040 Page 4 of 85 SECTION 1.0 CLIENT INFORMATION 1.1 Applicant: Company Name: Luxul Wireless 357 South 670 West, Suite 160 Lindon, UT 84042 Contact Name: Vaughn Staheli Title: V.P. Engineering 1.2 Manufacturer: Company Name: Luxul Wireless 105 South 1380 West, Unit 1 Lindon, UT 84042 Contact Name: Vaughn Staheli Title: V.P. Engineering Nemko-CCL, Inc. TEST REPORT: 180885-2.1 FCC ID#: W59XAP1040 Page 5 of 85 SECTION 2.0 EQUIPMENT UNDER TEST (EUT) 2.1 Identification of EUT: Brand Name: Luxul Model Number: XAP-1040 Serial Number: SW1015820 2.2 Description of EUT: The XAP-1040 is an 802.11bgn access point operating in the 2400 MHz to 2483.5 MHz band. The 802.11n transmission is a single antenna single chain with 20 or 40 MHz BW. The XAP-1040 is designed for outdoor use and fits into a weather tight, plastic housing that mounts to a wall, pole or other device. The XAP-1040 uses an embedded antenna. The XAP-1040 connects to a wired network and receives power over an Ethernet port. Power is provided by a Shenzhen Flypower Technology Co. Ltd. PS48IEIAY1000S power supply thru an Engenius EBU-101-01 POE injector. Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 1 2412 5 2432 9 2452 2 2417 6 2437 10 2457 3 2422 7 2442 11 2462 4 2427 8 2447 Testing was performed using available data rates and modulations at channels 1, 6, and 11 for 802.11b, 802.11g, and 802.11n (20 MHz BW) and at channels 3, 6, and 11 for 802.11n (40 MHz BW). Channels 1 and 2 as shown above are removed by software when operating at 802.11n (40 MHz BW). This report covers the circuitry of the devices subject to FCC Part 15, Subpart C. The circuitry of the device subject to FCC Subpart B is covered in Nemko-CCL, Inc. report #180885- 1.1. 2.3 EUT and Support Equipment: The FCC ID numbers for all the EUT and support equipment used during the test are listed below: Nemko-CCL, Inc. TEST REPORT: 180885-2.1 FCC ID#: W59XAP1040 Page 6 of 85 Brand Name Model Number Serial Number FCC ID Number or Compliance Description Name of Interface Ports / Interface Cables BN: Luxul MN: XAP-1040 ( Note 1) SN: SW1015820 W59XAP1040 WiFi Signal Booster See Section 2.4 BN: Netgear MN: WG103 SN: 20B103540015A PY30840097 Access Point Ethernet/Cat 5 cable w/RJ45 connectors (Note 2) RF/Coax cable (Note 2) BN: Engenius MN: EBU-101-01 SN: None DoC POE Injector Ethernet with Power/Cat 5 cable w/RJ45 connectors (Note 2) Ethernet/Cat 5 cable w/RJ45 connectors BN: TRENDnet MN: TEG-S50TXE SN: None DoC 5 port LAN switch Ethernet/Cat 5 cable w/RJ45 connectors BN: Toshiba MN: Satelite SN: None DoC Laptop Computer Ethernet/Cat 5 cable w/RJ45 connectors Note: (1) EUT (2) Interface port connected to EUT (See Section 2.4) The support equipment listed above was not modified in order to achieve compliance with this standard. Nemko-CCL, Inc. TEST REPORT: 180885-2.1 FCC ID#: W59XAP1040 Page 7 of 85 2.4 Interface Ports on EUT: Name of Ports No. of Ports Fitted to EUT Cable Descriptions/Length Ethernet with Power 1 Cat 5e with RJ45 connectors/1 meter 2.5 Modification Incorporated/Special Accessories on EUT: The following modifications were made to the EUT by the Client during testing to comply with the specification. This report is not complete without an accompanying signed attestation, included as Appendix 3, that the product will have all of the…

Text truncated - open the document above for the full version.

Frront View WWorst-Case RRadiated Em missions Connfiguration BBack View WWorst-Case RRadiated Em missions Conffiguration Froont View WWorst-Case Coonducted Em missions Connfiguration BBack View WWorst-Case RRadiated Em missions Conffiguration