WONBC91005010915 MICRO BEACON

Precyse Technologies, Inc. Date: 3 November 2013 Page 1 of 10 Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 Document No. 20130918-2 Revision 1.0 BC91/005010 BC91/005011 BC91/005012 BC91/005013 BC91/005014 Release Date: 18/09/2013 Prepared by: Yossi Nurok Distribution (Check all appropriate): Precyse Only Project Team Only Customer and Supplier Precyse Technologies, Ltd. Date: 3 November 2013 Page 2 of 10 Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 Revision Record Rev. Effective Date Description 1.0 18/09/2013 1 st release Reference documents # Doc # Description 1 Precyse Technologies, Ltd. Date: 3 November 2013 Page 3 of 10 Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 TABLE OF CONTENTS Section/Title Page Regulatory Information/disclaimers ....................................................................... 4 Abstract ................................................................................................................. 6 Product description ............................................................................................... 6 Micro Beacon: .................................................................................................... 6 Technical Data Sheet – 915 Micro Beacon ........................................................... 6 Compatibility: .............................................................................................. 6 Performance: ................................................................................................ 6 Communication: .......................................................................................... 6 Electrical: ....................................................................................................... 6 Environmental: ............................................................................................ 7 Antenna ................................................................................................................ 7 Schematics ........................................................................................................... 7 System test configuration ...................................................................................... 7 Beacon ............................................................................................................... 7 Method of operation .............................................................................................. 8 iLocate system block diagram ............................................................................... 9 Unit definitions: ................................................................................................... 10 Marketing and installation ..................................... Error! Bookmark not defined. Precyse Technologies, Ltd. Date: 3 November 2013 Page 4 of 10 Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 Regulatory Information/disclaimers Installation and use of this Wireless Radio device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, of the substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Instructions concerning human exposure to radio frequency electromagnetic fields: To comply with FCC Section 1.307 (b) (1) for human exposure to radio frequency electromagnetic fields, implement the following instruction: A distance of at least 20cm. between the equipment and all persons should be maintained during the operation of the equipment. Precyse Technologies, Ltd. Date: 3 November 2013 Page 5 of 10 Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. Precyse Technologies, Ltd. Date: 3 November 2013 Page 6 of 10 Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 303…

Text truncated - open the document above for the full version.

Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 To Whom It May Concern, We hereby authorize Mr. Shaike Raz of I.T.L. (Product Testing) Ltd (ITL) to act on our behalf regarding the FCC ID Certification Process for the following applications: Micro Beacon Models: BC91/005010 915 Micro Beacon- II BC91/005011 915 Micro Beacon - EI BC91/005012 915 Micro Beacon – IE BC91/005013 915 Micro Beacon – EE BC91/005014 915 Micro ExBeacon – II FCC ID: WONBC91005010 Thank you, Yossi Nurok Hardware engineer Precyse Technologies Tel: 972-3-9227107 Mobile: 972-54-4482062 Fax: 972-3-9227515

1 www.PrecyseTech.com Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: WONBC91005010. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: CONF APPENDIX BC91005010 BlkDia.pdf CONF APPENDIX BC91005010 PartsLst.pdf CONF APPENDIX BC91005010 Schem.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Yossi Nurok Hardware engineer

Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Monday, October 14, 2013 To Whom It May Concern: The BC91/005010, BC91/005011, BC91/005012, BC91/005013, BC91/005014 FCC ID: WONBC91005010 and label is so small that it cannot include the statement specified in FCC Part 15 Sub-part A, Section 15.19 (a) (3) “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation." Due to this reason, we are using the provisions of Part 15 Sub-part A, Section 15.19 (a) (5) and this testament appears in a prominent location in the user manual. Sincerely, Yossi Nurok Hardware engineer Precyse Technologies Inc Tel: 972-3-9227093 Mobile: 972-54-4482062 Fax: 972-3-9227515

Precyse labels for Micro Beacon variants P/N Product Name Comments BC91/005010 915 Micro Beacon- II Internal power, Internal Antenna BC91/005011 915 Micro Beacon - EI External power, Internal Antenna BC91/005012 915 Micro Beacon - IE Internal power, External Antenna BC91/005013 915 Micro Beacon - EE External power, External Antenna BC91/005014 915 Micro ExBeacon - II Internal power, Internal Antenna, HZ All labels which contain FCC ID are the same size: 50.8mm X 25.4mm and located at the base. Figure 1 The labels: Figure 2 Figure 3 Figure 4 Figure 5 Figure 6

Internal Splatch Antenna

Precyse Technologies, Inc. Date: 18 September 2013 Page 1 of 6 One Stamford Plaza, 263 Tresser Blvd Suite 957, Stamford, CT 06901 Tel: 203.564.1526 Document No. 2013918-1 Revision 1.0 BC91/005010 BC91/005011 BC91/005012 BC91/005013 BC91/005014 Operation description Release Date: 18Sep2013 Prepared by: Yossi Nurok Distribution (Check all appropriate): Precyse Only Project Team Only Customer and Supplier Precyse Technologies, Ltd.. Date: 18 September 2013 Page 2 of 6 One Stamford Plaza, 263 Tresser Blvd Suite 957, Stamford, CT 06901 Tel: 203.564.1526 Revision Record Rev. Effective Date Description 1.0 18/9/2013 Initial Release Reference documents # Doc # Description 1 Precyse Technologies, Ltd.. Date: 18 September 2013 Page 3 of 6 One Stamford Plaza, 263 Tresser Blvd Suite 957, Stamford, CT 06901 Tel: 203.564.1526 TABLE OF CONTENTS Section/Title Page Product description ........................................................................................... 4 Performance: ....................................................................................................... 4 Communication: .................................................................................................. 4 Electrical: ............................................................................................................ 4 Block diagram .................................................................................................... 5 Method of operation ......................................................................................... 6 Installation: ........................................................................................................ 6 Precyse Technologies, Ltd.. Date: 18 September 2013 Page 4 of 6 One Stamford Plaza, 263 Tresser Blvd Suite 957, Stamford, CT 06901 Tel: 203.564.1526 Product description Precyse BC91/005010, BC91/005011, BC91/005012, BC91/005013, BC91/005014 are radio transmitters used to define location zones in an iLocate system. The devices consist of 4 transceivers. Each transceiver operates in the 902MHz – 917MHz frequency band. Specifications: Performance: Read range: up to 500 m. (Within line of sight) Write range: up to 500 m. (Within line of sight) Read rate: 250 Kbps. Write rate: 250 Kbps. Communication: 4 channels with the following parameters: Frequency: 902 – 917MHz Modulation: 2-FSK Deviation: 190 KHz Channel bandwidth: 800 KHz EIRP: Up to 11dBm, digitally controlled Communication protocol: 2WiSAP, optional AES128 Encryption Transmission: Continuous transmission of its identification. Duty cycle: up to 20% Electrical: Power supply for BC91/005010, BC91/005012, BC91/005014: 3.6Vdc Power supply for BC91/005011, BC91/005013: 12Vdc External Antenna for BC91/005012, BC91/005013: Lynx Technologies ANT-916-CW-RH-SMA Precyse Technologies, Ltd.. Date: 18 September 2013 Page 5 of 6 One Stamford Plaza, 263 Tresser Blvd Suite 957, Stamford, CT 06901 Tel: 203.564.1526 Block diagram Microcontroller Transceiver Transceiver Transceiver Transceiver 26.000MHz 26.000MHz 26.000MHz 26.000MHz 32.768KHz 3.6V for BC91/005010 BC91/005012 BC91/005014 Variable attenuator Variable attenuator Variable attenuator Variable attenuator PA/LNA 12V for BC91/005011 BC91/005013 ANT-916-SP for: BC91/005010 BC91/005011 BC91/005014 ANT-916-CW-RH-SMA for: BC91/005012 BC91/005013 Precyse Technologies, Ltd.. Date: 18 September 2013 Page 6 of 6 One Stamford Plaza, 263 Tresser Blvd Suite 957, Stamford, CT 06901 Tel: 203.564.1526 Method of operation The BC91/00501x has 4 independent transceivers. The transceivers cannot operate as MIMO or phase array (beam shaping). All the transceivers are connected to a single low power microprocessor unit. Each transceiver in the unit transmits its identification packet at 20% or lower duty cycle. Each transceiver operates at a different 800 KHz band (905.0, 905.8, 906.6 etc). One of the channels (One which has the best reception from the base station) acts as a communication channel to the base station. This unit’s function is to provide location information to the mobile agents (tags). Upon packet reception, the tag transmits its signal strength (RSSI) and ID to the base station and its location can be calculated using various algorithms. Installation: Installation of the unit is intended for professional technician, see attached installation guide.

Precyse Technologies 100 Ashford Center North Suite 360 Atlanta, GA 30338 attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Monday, October 14, 2013 To Whom It May Concern: BC91/005010, BC91/005011, BC91/005012, BC91/005013, BC91/005014 FCC ID: WONBC91005010 Do not require any Tuning procedures in order to function. The devices operate within the 902-928MHz ISM band. There are no trimmers, variable capacitors or any other such components within the unit. Please contact me if there is any information you may need. Sincerely, Yossi Nurok HW engineer Precyse Technologies Inc Tel: 972-3-9227093 Mobile: 972-54-4482062 Fax: 972-3-9227515

Test Report E131380.00 Precyse Technologies Inc Page 1 of 76 FCC ACC M Ver 1.1 05Mayl 2000 DATE: 22 October 2013 I.T.L. (PRODUCT TESTING) LTD. FCC Radio Test Report for Precyse Technologies Inc Equipment under test: 915 Micro Beacon BC91/005010, BC91/005011, BC91/005012, BC91/005013, BC91/005014* Written by: _____________________________ R. Pinchuck, Documentation Approved by: _____________________________ A.Sharabi, Test Engineer Approved by: _____________________________ I. Raz, EMC Laboratory Manager This report must not be reproduced, except in full, without the written permission of I.T.L. (Product Testing) Ltd. This report relates only to items tested. *See Customer’s Declaration on Page 6 Test Report E131380.00 Precyse Technologies Inc Page 2 of 76 FCC ACC M Ver 1.1 05Mayl 2000 Measurement/Technical Report for Precyse Technologies Inc 915 Micro Beacon BC91/005010, BC91/005011, BC91/005012, BC91/005013, BC91/005014 FCC ID: WONBC91005010 This report concerns: Original Grant: X Class I Change: Class II Change: Equipment type: Digital Transmission System Limits used: 47CFR15 Section 15.247 Measurement procedure used is according to KDB 558074 D01 9 April 2013 and ANSI 6.34: 2003. Application for Certification Applicant for this device: prepared by: (different from "prepared by") Ishaishou Raz Yossi Nurok ITL (Product Testing) Ltd. Precyse Technologies Ltd. Kfar Bin Nun Ha’amal 11 D.N. Shimshon 99780 Rosh Ha’ayin 48092 Israel Israel e-mail [email protected] Tel: +972-3-922-7093 Fax: +972-3-922-7515 e-mail: [email protected] Test Report E131380.00 Precyse Technologies Inc Page 3 of 76 FCC ACC M Ver 1.1 05Mayl 2000 TABLE OF CONTENTS 1. GENERAL INFORMATION ------------------------------------------------------------------------------- 5 1.1 Administrative Information ................................................................................. 5 1.2 List of Accreditations ......................................................................................... 7 1.3 Product Description ........................................................................................... 8 1.4 Test Methodology .............................................................................................. 8 1.5 Test Facility ....................................................................................................... 8 1.6 Measurement Uncertainty ................................................................................. 8 2. SYSTEM TEST CONFIGURATION --------------------------------------------------------------------- 9 2.1 Justification ........................................................................................................ 9 2.2 EUT Exercise Software ..................................................................................... 9 2.3 Special Accessories .......................................................................................... 9 2.4 Equipment Modifications ................................................................................... 9 2.5 Configuration of Tested System ...................................................................... 10 3. TEST SETUP PHOTOS ----------------------------------------------------------------------------------- 11 4. 6 DB MINIMUM BANDWIDTH -------------------------------------------------------------------------- 16 4.1 Test Specification ............................................................................................ 16 4.2 Test Procedure ................................................................................................ 16 4.3 Test Results..................................................................................................... 16 4.4 6 dB Minimum Bandwidth Test Equipment Used. ........................................... 19 5. MAXIMUM PEAK POWER OUTPUT ------------------------------------------------------------------ 20 5.1 Test Specification ............................................................................................ 20 5.2 Test Procedure ................................................................................................ 20 5.3 Test Results..................................................................................................... 20 5.1 Maximum Peak Output Power Test Equipment Used ..................................... 23 6. PEAK POWER OUTPUT OUT OF 902-928 MHZ BAND ----------------------------------------- 24 6.1 Test Specification ............................................................................................ 24 6.2 Test Procedure ................................................................................................ 24 6.3 Test Results..................................................................................................... 24 6.4 Peak Power Output of 902-928 MHz Band Test Equipment Used .................. 27 7. BAND EDGE SPECTRUM ------------------------------------------------------------------------------- 28 7.1 Test Specification ............................................................................................ 28 7.2 Test Procedure ................................................................................................ 28 7.3 Test Results..................................................................................................... 28 7.4 Band Edge Spectrum Test Equipment Used ................................................... 31 8. SPURIOUS RADIATED EMISSION, 9 KHZ – 30 MHZ ------------------------------------------- 32 8.1 Test Specification ............................................................................................ 32 8.2 Test Procedure ................................................................................................ 32 8.3 Test Results..................................................................................................... 32 8.4 Field Strength Calculation .....................................................…

Text truncated - open the document above for the full version.