WP3NEXTCAMPGPWireless Motion detector with integrated camera

NEXT CAM PG+ Motion Detector with Integrated Camera The reference to NEXT CAM PG+ throughout this document includes the models NEXT CAM P9M0, NEXT CAM P8M0 and NEXT CAM P8M1. EN To download the full manual for this product, go to https://www.visonic.com/download-center or scan the QR code. ES Para descargar el manual completo de este producto, vaya a https://www.visonic.com/download-center o escanee el código QR. FR Pour télécharger les manuels complets,veuillez visiter https://www.visonic.com/download-center ou scanner le code QR. PT Para baixar os manuais completos,acesse https://www.visonic.com/download-center ou escaneie o código QR. DA Besøg https://www.visonic.com/download-center eller scan QR-koden for at downloade de komplette manualer. DE ZumDownload der ausführlichen anleitung,scannen Sie bitte auf https://www.visonic.com/download-center oder gehen Sie den QR-Code. IT Per scaricare i manuali completi, visitare https://www.visonic.com/download-center o scansionare il codice QR. NL Downloaden volledige handleidingen op https://www.visonic.com/download-center of scan de QR-code. SV Besök https://www.visonic.com/download-center eller skanna QR-koden,för att ladda ned den kompletta manualerna. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with FCC Section 1.1310 for human exposure to radio frequency electromagnetic fields, implement the following instruction: A distance of at least 20cm. between the equipment and all persons should be maintained during the operation of the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Simplified EU declaration of conformity Hereby, Visonic Ltd. Declares that the radio equipment type NEXT CAM P8M0 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.visonic.com/download-center Max Tx power: 14 dBm @ 868 MHz Product Certification NEXT CAM PG+ complies with the following standards: NEXT CAM P9M0 FCC (915 MHz): 47CFR part 15.247 NEXT CAM P8M0 NEXT CAM P8M1 Europe (868 MHz): EN 300220, EN 301489, EN 50130-4, EN 50130-5, EN 61000-6-3, EN 62368-1, EN 50131-1, EN 50131-5- 3, EN50131-2-6 Grade 2, Class II and EN 50131-6 Type C UK (868 MHz): is suitable for use in systems installed to conform to PD6662 at Grade 2 and environmental class II, DD243 and BS8243 Safety Instructions Read the safety information before you install the equipment. The detector shall be installed and used within an environment that provides the pollution degree max 2 and over voltages category II in non-hazardous locations, indoor only. The equipment is designed to be installed by SERVICE PERSONS only; (SERVICE PERSON is defined as a person having the appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed in performing a task and of measures to minimize the risks to that person or other persons). The detector is to be installed in an indoor dry location. Exposure to weather or corrosive conditions may damage the unit. CAUTION: Risk of explosion if the battery is replaced with an incorrect type. Dispose of used battery according to the manufacturer's instructions. WARRANTY Visonic Limited (the “Manufacturer") warrants this product only (the "Product") to the original purchaser only (the “Purchaser”) against defective workmanship and materials under normal use of the Product for a period of twelve (12) months from the date of shipment by the Manufacturer. This Warranty is absolutely conditional upon the Product having been properly installed, maintained and operated under conditions of normal use in accordance with the Manufacturers recommended installation and operation instructions. Products which have become defective for any other reason, according to the Manufacturers discretion, such as improper installation, failure to follow recommended installation and operational instructions, neglect, wilful damage, misuse or vandalism, accidental damage, alteration or tampering, or repair by anyone other than the manufacturer, are not covered by this Warranty. There is absolutely no warranty on software, and all software products are sold as a user license under the terms of the software license agreement included with such Product. The Manufacturer does not represent that this Product may not be compromised and/or circumvented or that the Product will prevent any death and/or personal injury and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the Product will i…

Text truncated - open the document above for the full version.

Visonic Ltd. 13 Zarhin Street P.O.Box 4228 Raanana, 4366241, Israel Tele: +972 3 645 6789 Fax: +972 3 645 6788 www.visonic.com U .S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands AT TENTION: FCC Certification – Section 2.911(d)(7) Information D esignated U.S. Agent Company name: Qolsys Inc. FRN: 0022572226 Contact person name: Mark Skeen Street address: 1919 S. Bascom Ave. ZIP/City/State Campbell, CA 95008, USA Telephone number: Email address: [email protected] Signature: Date: 2023 0316 Thi s letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The A pplicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. A pplicant Company name: Visonic Ltd. Grantee Code: WP3 Contact person name: Zuri Rubin Street address: 13 Zarhin street ZIP/City/State 4366241, Raanana, Israel Telephone number: +972 3 6456832 Email address: [email protected] Signature: Date: 20.3.2023 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvdM 02 1 15-05-2023 Added FRN to Agent details RvdM Issued/modified by : Richard van der Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : __-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvM Issued/modified by : Richard van der Meer Function : Certification assessor Revision 01 Date :07-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 09-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 09-02-2023

Certification Application Attestation Statements - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: City: Name (2) : Function: Telephone number: Email address: Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” To Whom It May Concern: 11-Dec.- 23 Visonic Ltd. 13 Zarhin Street Raanana 4366241, Israel Subject: FCC ID: WP3NEXTCAMPGP Statement for 47 CFR section 2.911(d)(5)(i) Visonic Ltd. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Visonic Ltd. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant Zuri Rubin Certification Manager 972 3 6456 832 [email protected] Raanana

Visonic Ltd. 13 Zarhin Street P.O.Box 4228 Raanana, 4366241, Israel Tele: +972 3 645 6789 Fax: +972 3 645 6788 www.visonic.com December 13, 2023 Telefication B.V. Attn: Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Application for certification for a Wireless Motion detector with integrated camera, FCC ID: WP3NEXTCAMPGP Dear Gentlemen, Please find attached our application for certification for a Wireless Motion detector with integrated camera, FCC ID: WP3NEXTCAMPGP, prepared in accordance with FCC Rules, parts 2 and 15, section 15.247(FHSS). The product testing and this application for certification were performed by Hermon Laboratories, which is recognized and accredited by FCC, Test Firm Registration Number is 927748, Designation Number is IL1001. Hermon Labs responsible person is Mr. Michael Nikishin, tel: +972 4626 8440, fax:+972 4628 8277, e-mail: [email protected]. We hope this application satisfies your requirements. Please send an invoice to Hermon Labs. Zuri Rubin, Certification Manager Visonic Ltd.

Visonic Ltd. 13 Zarhin Street P.O.Box 4228 Raanana, 4366241, Israel Tele: +972 3 645 6789 Fax: +972 3 645 6788 www.visonic.com Declaration of Authorization We Name: Visonic Ltd. Address: 13 Zarhin street City: Raanana, 4366241 Country: Israel Declare that: Name Representative of agent: Peysahov Sheynin Svetlana (1) Agent Company name: Hermon Laboratories Ltd. Address: Harakevet Industrial Zone City: Binyamina 3055001 Country Israel is authorized to apply for Certification of the following product(s): Product description: Wireless Motion detector with integrated camera Type designation: NEXT CAM P9M0 Trademark: Johnson Controls Validity/expiry date: October 26, 2023 on our behalf. Date: October 26, 2023 Name: Zuri Rubin (2) Function: Certification Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 23-06-2023 RF_501, Issue 11 Page 1 of 2 Company Name: Visonic Ltd. Address: 13 Zarhin street City: Raanana Country: Israel To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: WP3NEXTCAMPGP Reference number: 50798 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: in order to avoid exposed of the technology to the competitors Date: December 13, 2023 Name and signature of applicant: Mr. Zuri Rubin Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 23-06-2023 RF_501, Issue 11 Page 2 of 2 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 10 1 02-01-2023 History sheet added AG 11 1 & 2 23-06-2023 Corrected date and page# WJJ Issued/modified by : Willem Jan Jong Function : Team Lead Revision : 11 Date : 23-06-2023 Verified by : Axel Gase Function : Manager Quality Assurance Date : 23-06-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 23-06-2023

Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 1 of 3 EXTERNAL PHOTOGRAPHS This document contains 2 photographs Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 2 of 3 Photograph No.1 Wireless Motion detector with integrated camera Front view Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 3 of 3 Photograph No.2 Wireless Motion detector with integrated camera Rear side view

ECM Title: JCI LABEL DRAWING 23392 TBD Product Name: Label PG+ NEXT CAM 915 Product Date Name Document No: 4017868 17.11.2022 ALBERT F. Created Document Rev: 01 01.06.2023 ALBERT F. Updated Sheet 1 of 1 01.06.2023 SHAY A. Approved MATERIAL: Polyester S-0001-J SIZE: 23*22 mm - Two in one row. B A

Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 1 of 4 INTERNAL PHOTOGRAPHS This document contains 3 photographs Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 2 of 4 Photograph No.1 Wireless Motion detector with integrated camera PCB Main Board (front side) Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 3 of 4 Photograph No.1 Wireless Motion detector with integrated camera PCB Main Board (back side) Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 4 of 4 Photograph No.1 Wireless Motion detector with integrated camera PCB Camera

Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 1 of 1 Environmental evaluation and exposure limit according to FCC CFR 47part 1, §1.1307, §1.1310 The Wireless Motion Detector is classified as a mobile device. The Wireless Motion Detector includes transmitter operating according to FCC part 15 subpart C section 15.247 (FHSS) The FCC limit for power density for general population/uncontrolled exposure is f/1500 mW/cm 2 for 300 – 1500 MHz frequency range: P = 912.75/1500 = 0.61 mW/cm 2 The power density P (mW/cm 2 ) = P T / 4 r 2 P T is the transmitted power, which is equal to the peak transmitter output power 14.29 dBm plus maximum antenna gain 3 dBi, the maximum equivalent isotropically radiated power EIRP is P T = 14.29 dBm + 3 dBi = 17.29 dBm = 53.57 mW. The power density at 20 cm (minimum safe distance, required for mobile devices), calculated as follows: Compliance with FCC limit: 53.57 mW / 4 (20 cm) 2 = 0.011 mW/cm 2 << 0.61 mW/cm 2 General public cannot be exposed to dangerous RF level.

Johnson Controls 13 Zarhin Street, Raanana 4366241, Israel 1 NEXT CAM P9M0 Antenna Rev. 00 December, 2023 1. Antenna Specifications 1.1. Electrical/Functional Requirements Input Impedance: 50 Ohm nominal Frequency Range: 902-928 MHz 1.2 Antenna Mechanical View Peak Gain (relative to Isotropic): 3 dBi

Hermon Laboratories Ltd. 66 HaTachana str., P.O. Box 23, Binyamina 3055001, Israel Tel. +972 4628 8001 Fax. +972 4628 8277 E-mail: [email protected] Page 1 of 53 Report ID: VISRAD_FCC.50798.docx Date of Issue: 19-Oct-23 ELECTRICAL TESTING 0839.01 TEST REPORT ACCORDING TO: FCC 47CFR part 15 subpart C §15.247 (FHSS) and subpart B, RSS-247 Issue 2:2017, RSS-Gen Issue 5, ICES-003 Issue 7:2020 FOR: Visonic Ltd. Wireless Motion detector with integrated camera Model: NEXT CAM P9M0 FCC ID: WP3NEXTCAMPGP This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: VISRAD_FCC.50798.docx Date of Issue: 19-Oct-23 Page 2 of 53 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 Test configuration .......................................................................................................................................................... 5 6.3 Changes made in EUT .................................................................................................................................................. 5 6.4 Transmitter characteristics ............................................................................................................................................ 6 7 Transmitter tests according to 47CFR part 15 subpart C and RSS-247 requirements .................................................. 7 7.1 20 dB bandwidth ........................................................................................................................................................... 7 7.2 Carrier frequency separation ....................................................................................................................................... 11 7.3 Number of hopping frequencies .................................................................................................................................. 13 7.4 Average time of occupancy ......................................................................................................................................... 16 7.5 Peak output power ...................................................................................................................................................... 19 7.6 Field strength of spurious emissions ........................................................................................................................... 24 7.7 Band edge radiated emissions .................................................................................................................................... 37 7.8 Antenna requirements ................................................................................................................................................. 41 8 Emissions tests according to FCC 47CFR part 15 subpart B and ICES-003 requirements ......................................... 42 8.1 Radiated emission measurements .............................................................................................................................. 42 9 APPENDIX A Test equipment and ancillaries used for tests ....................................................................................... 46 10 APPENDIX B Test equipment correction factors ......................................................................................................... 47 11 APPENDIX C Measurement uncertainties .................................................................................................................. 50 12 APPENDIX D Test laboratory description ................................................................................................................... 51 13 APPENDIX E Specification references ........................................................................................................................ 52 14 APPENDIX F Abbreviations and acronyms ................................................................................................................. 53 Report ID: VISRAD_FCC.50798.docx Date of Issue: 19-Oct-23 Page 3 of 53 1 Applicant information Client name: Visonic Ltd. Address: 13 Zarhin Street, Raanana, 4366241, Israel Telephone: +972 3645 6832 Fax: +972 3645 6788 E-mail: [email protected] Contact name: Mr. Zuri Rubin 2 Equipment under test attributes Product name: Wireless Motion detector with integrated camera Product type: Transceiver Model(s): NEXT CAM P9M0 Serial number: NA Hardware version: 90-210317 Software release: JS-704000 Receipt date 23-May-23 3 Ma…

Text truncated - open the document above for the full version.

Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 1 of 5 SETUP PHOTOGRAPHS This document contains 5 photographs Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 2 of 5 Photograph No.1 Setup for spurious field strength measurements in anechoic chamber from 9 kHz to 30 MHz Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 3 of 5 Photograph No.2 Setup for carrier and spurious emissions measurements in anechoic chamber from 30 MHz to 1 GHz Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 4 of 5 Photograph No.3 Setup for field strength measurements in anechoic chamber above 1 GHz Visonic Ltd. FCC ID: WP3NEXTCAMPGP Page 5 of 5 Photograph No.4 Setup for 20 dB bandwidth measurements