X3XMX-P3WDOCUMENT CAMERA

FCC regulatory conformance： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user' s authority to operate the equipment. FCC RF exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating IC Warning This device complies with CAN ICES-003 (B)/NMB-003(B). This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme à la norme CAN ICES-003 (B)/ NMB-003 (B). Cet appareil contient des émetteurs / récepteurs exempt (s) de licence qui sont conformes aux RSS exemptes de licence d'Innovation, Sciences et Développement économique Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. IC Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d exposition aux rayonnements de la IC établies pour unenvironnement non contrôé. Cet équipement doit être installé et fonctionner àau moins 20cm de distance d un radiateur ou de votre corps.

(TECHNO HORIZON CO., LTD.) Federal Communications Commission Authorization and Evaluation Division 7 435 Oakland Mills Road Columbia, MD 21046 USA Date: 23 Au gust 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: X3XMX-P3W FRN: 0019467752 (TECHNO HORIZON CO., LTD.) TECH NO HORIZON CO., LTD. certifies that, as o f the date of the filing of the'application, ELMO USA Corp. is our designated U.S. agent f or s ervice of process for the above referenced FCC ID. TECH NO HORIZON CO., LTD. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. E LMO USA Corp. accepts, as of the date of th e filing of the application, the obligation of the de signated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: ELMO USA Corp. Address: 6851 Jericho Turnpike, Suite 145, Syosset, NY 11791 Contact Person: Harry Ochiai Tel.: 516.501.1400 Fax No.: 516.501.0429 · Email: [email protected] Sincerely, Insert applicant name: TECHNO HORIZON CO., LTD. Applicant printed name: Hidehito Achiwa Ap ;;;;;i;;; = Ac� 1 wa Rev 1/26/2023 U.S. Agent company nam,e: ELMO USA Corp. U.S. Agent printed name: Harry Ochiai U.S. Agent signature: . ��Oduu v

Report No.: BL-SZ2360645-AW 1 / 5 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Report No.: BL-SZ2360645-AW 2 / 5 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: BL-SZ2360645-AW 3 / 5 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: BL-SZ2360645-AW 4 / 5 Accessory-Adapter CLOSE-UP Report No.: BL-SZ2360645-AW 5 / 5 Accessory-USB Cable --BLANK BELOW--

Location: Located in the center of the bottom of the product Label

Report No.: BL-SZ2360645-AI 1 / 6 EUT INTERNAL PHOTOS EUT UNCOVER VIEW 1 EUT UNCOVER VIEW 2 Report No.: BL-SZ2360645-AI 2 / 6 EUT UNCOVER VIEW 3 EUT UNCOVER VIEW 4 Report No.: BL-SZ2360645-AI 3 / 6 MAIN BOARD TOP VIEW (WITH SHIELDING) MAIN BOARD TOP VIEW (WITHOUT SHIELDING) RF Chip Report No.: BL-SZ2360645-AI 4 / 6 MAIN BOARD REAR VIEW MAIN BOARD TOP VIEW Report No.: BL-SZ2360645-AI 5 / 6 MAIN BOARD REAR VIEW FPC Antenna Report No.: BL-SZ2360645-AI 6 / 6 BATTERY (FRONT) BATTERY (REAR) --BLANK BELOW--

Report No.: BL-SZ2360645-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: TECHNO HORIZON CO., LTD. Address: 2-13-1 Chikamatori Minami-ku, Nagoya, 457-0071, Japan Equipment Type: DOCUMENT CAMERA Model Name: MX-P3W Brand Name: ELMO FCC ID: X3XMX-P3W Test Standard: 47 CFR Part 2.1091 KDB 447498 D04 v01 Sample Arrival Date: Jun. 21, 2023 Test Date: Jun. 25, 2023 - Jul. 11, 2023 Date of Issue: Aug. 18, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Xiong Lining Checked by: Xu Rui Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2360645-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Aug. 18, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory .............................................................................................................. 3 1.2 Test Location .................................................................................................................. 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ...................................................................................................... 4 2.2 Manufacturer Information ............................................................................................... 4 2.3 Factory Information ........................................................................................................ 4 2.4 General Description for Equipment under Test (EUT) ................................................... 4 2.5 Ancillary Equipment ........................................................................................................ 4 2.6 Technical Information ..................................................................................................... 5 3 SUMMARY OF TEST RESULT ................................................................................................... 6 3.1 Test Standards ............................................................................................................... 6 4 DEVICE CATEGORY AND LEVELS LIMITS .............................................................................. 7 5 ASSESSMENT RESULT ............................................................................................................. 9 5.1 Output Power ................................................................................................................. 9 5.2 Tune-up power ............................................................................................................... 9 5.3 RF Exposure Evaluation Result ..................................................................................... 9 5.4 Conclusion ...................................................................................................................... 9 Report No.: BL-SZ2360645-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-SZ2360645-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant TECHNO HORIZON CO., LTD. Address 2-13-1 Chikamatori Minami-ku, Nagoya, 457-0071, Japan 2.2 Manufacturer Information Manufacturer TECHNO HORIZON CO., LTD. Address 2-13-1 Chikamatori Minami-ku, Nagoya, 457-0071, Japan 2.3 Factory Information Factory 1 AIDEN VIETNAM LIMITED Address 1 Lot L5, Nam Sach Industrial Zone, Ai Quoc Ward, Hai Duong City, Hai Duong Province, Vietnam Factory 2 DONGGUAN SHINGI ELECTRONICS CO., LTD. Address 2 151 Naner Street Qiaodong Road, Shanhe Village, Qiaotou Town, Dongguan City, Guangdong, P.R. China 2.4 General Description for Equipment under Test (EUT) EUT Name DOCUMENT CAMERA Model Name Under Test MX-P3W Series Model Name N/A Description of Model name differentiation N/A Hardware Version V20.3 Software Version EM-CAI184-0008 Dimensions (Approx.) N/A Weight (Approx.) N/A 2.5 Ancillary Equipment Ancillary Equipment 1 Battery Brand Name N/A Model No. SY18650ZL2-1S2PP Serial No. N/A Capacitance 4900 mAh Rated Voltage 3.7 V Limited Voltage 4.2 V Manufacturer SHEN ZHEN BAT ELECTRONICS CO., LTD Report No.: BL-SZ236…

Text truncated - open the document above for the full version.

1.CUSTOMER 2.CUSTOMER PART NAME 3.CUSTOMER CODE 4.ANT TYPE 5.PROPOSES DATES 6.manufacturer 7.ERSION 2023-6-15 SPECIFICATION FOR APPROVAL テクノホライゾン株式会社 WIFI-ANTENNA-P3W 5ZA0000751 FPC V0 CUSTOMER APPROVAL U TECH ASIA INDUSTRY (HK) CO., LIMITED TEL:+86-769-85324256 E-Mail：[email protected] H P: www.utech-cn.com ユーテック U TECH ASIA INDUSTRY (HK) CO., LIMITED Change History No. versionRevision contentRevision dateRevised 1 V0 Initial Release 2023-06-15 Xiaoshuqin FPC WiFi Dual band antenna WiFi Dual band antenna 3N0401BK-062 c ha ra ct eristic ●● Aesthetics ● Working 24/7 ● Optimized dimensions Medium gain, low standing w ave ● Flexible Application: ●WIFI system Model NO 3N0401BK-062 Electric Spec Fr equency rang-MHz 2400-2500MHz 5150-5850MHz Bandwidth -MHz See waveform diagram for details Gain -dBi see table VSWR 2.0 MAX. Impedance-Ω 50 Con nector model generation Ipex Mec hanical Specification Siz e -mm L=270mm An tenna weight-kg / Wor king Temperature -°c -40～+60 Rad ome color black CABLE Spec RG-113 Black coaxial line A 1 2 3 4 5 6 7 8 B CD E F G H 1 2 3 4 5 AB CD E F G H 10 0 20 PAGE: SCALE: PRO.: UNIT: SIZE:CODE: FILE TYPE:DRA./DATE:CHE./DATE:APP./DATE:FORM No.: GENERAL TOLERANCE: A4 mm 3rd HJ-QR-E-03 22.09.01 TITLE: UNLESS OTHERWISE SPECIFIED LINEAR: < L ≤ 60.5 ± 0.05 < L ≤ 306 ± 0.10 < L ≤ 120 30 ± 0.20 ANGULAR: < L ≤ 100 ± 1°30' < L ≤ 5010 ± 1°00' < L ≤ 120 50 ± 0°30' DongGuan HuangJie Communication Technology Co., Ltd. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRETARY TO HuangJie AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION. REV. RELEASE AND CHANGE SUMMARY DATE Product S.He 23.06.03 1:1 1/1 3N0401BK-062 A 2023.06.03 2.4/5.8G Internal Antenna OD1.13 double tin wire black, P1 end riveted IPEX first generation original factory, P2 end welded FPC (2YF199), cut wire length L=270mm Technical S equi S ements: Di S ection S equi S ement: None 2. Elect S ical cha S acte S istics: Cha S acte S istic impe E ance: 50 Ω; F S equency S ange: 2.4~2.5GHz; 5.15-5.85GHz; Inspection metho E : Single test antenna, 100% test using a netwo S k analyze S ; Compa S e wavefo S ms at 2-6GHz. 3 Cable S etention fo S ce: Pulling fo S ce between cable an E . HF: minimum 1.30kgf. Test metho E : Lift a 1.30kg weight ve S tically off the table at a spee E of app S oximately 25 ± 3 millimete S s pe S minute along the cent S al axis of the cable, which is consi E e S e E qualifie E . 4. Dimensional inspection: [*], FAI fi S st a S ticle p S ocess inspection items; ◆ Key inspection items fo S QIP; ★ , CPK p S ocess cont S ol p S oject. 5. Appea S ance inspection: visual full inspection. The su S face of the p S o E uct must not be sc S atche E , E amage E , o S E i S ty; The coating colo S shall be b S ight an E unifo S m, an E the S e shall be no oxi E ation. 6 packaging specifications: 25CS/bun E le, 4 bun E les/package, i.e. 100PCS/package. 7 Envi S onmental S equi S ements: All mate S ials use E in p S o E ucts an E p S o E uction p S ocesses must meet the S equi S ements of the EU RoHS E i S ective. BOM List No. PART NUMBER PART NAME AND DESCRIPTION Q'TY 1 2C5M11312BK1 Micro coaxial cable ： OD1.13,50Ω, Double tin wire, black 2 2LM10P113012 MHF-1-PLUG FOR OD1.13 CABLE,20278-112R-13, 原厂 11 3 2YF199 FPC ： L40.00*W9.00, Surface sprayed with black oil, front side 3M 300LSE 1 优特 ◆ [10] 270.00±1.00 Line cutting diagram P1 IPEX First generation original factory P2 FPC [14] 1.00±0.20 tin-plating [15] 1.50±0.20 [16] 2.00±0.20 tin-plating [11] 1.30±0.20 [12] 1.00±0.20 [13] 1.00±0.20 [5] 9.00 [7] 17.00 [6] 3.00 [9] 3.00±0.10 ◆ [8] 2.10±0.10 ◆[17] 2.00 MAX Solder height 2:1 [3] 9.00 [2] 40.00 [4] 20.65 [8] 5.10 ◆ [1] 270.00±3.00 2 3 1 Dongguan Huangjie Communication Technology Co., Ltd Antenna Electrical Characteristic Test Report Part Number: 3N0401BK-062 ItemSpecJudge Part Name: FPC WIFI Dual band antenna Characteristic impedance 50Ω OK Test Equipment Network analyzer/microwave darkroom 2400-2500MHz VSWR 2.0 Max OK Ｑuantity 2 pcs OK Test Date 2023/06/09 Gain See table OK Checker: Wang jun Tester: River 5150-5850MHz VSWR 2.0 Max

Report No.: BL-SZ2360645-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 71 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: TECHNO HORIZON CO., LTD. Address: 2-13-1 Chikamatori Minami-ku, Nagoya, 457-0071, Japan Equipment Type: DOCUMENT CAMERA Model Name: MX-P3W Brand Name: ELMO FCC ID: X3XMX-P3W ISED Number: 8804A-X3XMXP3W Test Standard: 47 CFR Part 15 Subpart C RSS-Gen Issue 5 RSS-247 Issue 2 (refer to section 3.1) Sample Arrival Date: Jun. 21, 2023 Test Date: Jun. 25, 2023 - Jul. 11, 2023 Date of Issue: Aug. 18, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie Zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2360645-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 71 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Aug. 18, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................. 8 3.1 Test Standards ............................................................................................................... 8 3.2 Test Verdict .................................................................................................................... 8 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 9 4.1 Test Environments ......................................................................................................... 9 4.2 Test Equipment List ........................................................................................................ 9 4.3 Test Software List ........................................................................................................... 9 4.4 Measurement Uncertainty ............................................................................................ 10 4.5 Description of Test Setup ............................................................................................. 10 4.6 Measurement Results Explanation Example ................................................................ 13 5 TEST ITEMS .............................................................................................................................. 14 5.1 Antenna Requirements ................................................................................................. 14 5.2 Output Power ............................................................................................................... 15 5.3 Occupied Bandwidth .................................................................................................... 17 5.4 Conducted Spurious Emission ..................................................................................... 18 Report No.: BL-SZ2360645-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 71 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.5 Band Edge (Authorized-band band-edge) .................................................................... 20 5.6 Conducted Emission .................................................................................................... 22 5.7 Radiated Spurious Emission ........................................................................................ 23 5.8 Band Edge (Restricted-band band-edge) ..................................................................... 28 5.9 Power Spectral density (PSD) ...................................................................................... 29 ANNEX A TEST RESULT ............................................................................................................. 30 A.1 Output Power ............................................................................................................... 30 A.2 Occupied Bandwidth .................................................................................................... 33 A.3 Conducted Spurious Emissions ................................................................................... 38 A.4 Band Edge (Authorized-band band-edge) .................................................................... 45 A.5 Conducted Emissions ...............................................................................................…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2360645-AR 1 / 5 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz 30MHz-1GHz Report No.: BL-SZ2360645-AR 2 / 5 Close-up Above 1GHz Report No.: BL-SZ2360645-AR 3 / 5 Close-up 2 Conducted Test Photo Conducted Test-2.4G WIFI Report No.: BL-SZ2360645-AR 4 / 5 Conducted Test-5G WIFI DFS Test Report No.: BL-SZ2360645-AR 5 / 5 3 Conducted Emissions Test Photo 1 Test Photo 2 --BLANK BELOW--