X4D-EMU-200Arm-based IoT Gateway with WiFi

EMU-200 Series Arm-based IoT Gateway / Arm架構IoT閘道器 User’s Manual Manual Rev.: 0.17 Revision Date: Nov. 6, 2023 Part No: 50M-19701-1000 PRELIMINARY FOR REGULATION ii Revision History RevisionRelease DateDescription of Change(s) 0.172023-11-06 Next draft PRELIMINARY FOR REGULATION Preface iii EMU-200 Series Preface Copyright © 2023 ADLINK Technology Inc. This document contains proprietary information protected by copy- right. All rights are reserved. No part of this manual may be repro- duced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Disclaimer The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. ADLINK is committed to fulfill its social responsi- bility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encour- aged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company. Battery Labels (for products with battery) ᘄ㟁ụᆪᅇᨲ PRELIMINARY FOR REGULATION ivPreface California Proposition 65 Warning WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Diox- ane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Trademarks Product names mentioned herein are used for identification pur- poses only and may be trademarks and/or registered trademarks of their respective companies. Conventions Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly. NOTE: NOTE: Additional information, aids, and tips that help users perform tasks. CAUTION: Information to prevent minor physical injury, component dam- age, data loss, and/or program corruption when trying to com- plete a task. WARNING: Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task. PRELIMINARY FOR REGULATION Preface v EMU-200 Series BSMI Warning 警告:為避免電磁干擾，本產品不應安裝或使用於住宅環境 NCC Warning 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者 均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現 有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前述合法通信，指依電信管理法規定作業之無線電通信。 低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性 電機設備之干擾。 1.應避免影響附近雷達系統之操作。 2.高增益指向性天線只得應用於固定式點對點系統。 FCC Warning Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any PRELIMINARY FOR REGULATION viPreface interference received, including interference that may cause undesired operation. RF exposure statements 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or nearby persons. IC Warning RSS-GEN 8.4 Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. Caution: 1) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co- channel mobile satellite systems; 2) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment …

Text truncated - open the document above for the full version.

V02072023 ADLINK TECHNOLOGY INC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10/24/2023 Ref: Attestation Statement Part 2.911(d)(7) Filing FCC ID:X4D-EMU-200 ADLINK TECHNOLOGY INC certifies that, as of the dates of this application, Americas Compliance Consultin g LLC db a iCertif i “iCertifi ” is our designated U.S. agent f or service of process for the above referenced FCC ID. ADLINK TECHNOLOGY INC accepts to maintain an agent f or no less than one year after th e grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent f or service process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Americas Compliance consulting, LLC dba iCertifi FCC FRN: 0033399411 Address: 1001 SW Disk Drive, Suite 250, Bend, Oregon 97702 Contact Person: Mr Paul A Preston Tel: 866-885-4575 Email: [email protected] Sincerely, ADLINK TECHNOLOGY INC FRN : 0019481472 Americas Compliance Consulting LLC dba iCertifi Sean Ba Paul Preston Signature

5 5 4 4 3 3 2 2 1 1 DD CC BB AA ARM Cortex A9 USB 2.0 USB 2.0 Hub USB 2.0 Connector USB 2.0 Connector USB 2.0 USB 2.0 MDI GbE RJ45 LAN PHY RMII LED RTC Battery w/ Cable Function Button TX & RX LED DDR3L SDRAM 1GB DDR3 MMC eMMC 32GB SD Card Connector SDIO SDIO WiFi Module USB 2.0 X2 RS485/422/232 5 Pin Connector MDI GbE RJ45 LAN PHY RMII USB 2.0 Pin header (For External BT) USB 2.0 Isolated Circuit WIFI Antenna Connector X2 X2 X4 X5

ADLINK TECHNOLOGY INC. No 66 Huaya 1st Rd Guishan District Taoyuan City 333, Taiwan Declaration of Authorization We Company Name: ADLINK TECHNOLOGY INC. Address: No 66 Huaya 1st Rd Guishan District Taoyuan City 333, Taiwan City: Taoyuan City State: Country: Taiwan Declare that Name Representative of agent: William Chung / Senior Director Agent Company name: Eurofins E&E Wireless Taiwan Co., Ltd. Address: No. 140-1, Changan Street, Bade District, City: Taoyuan Country: Taiwan Is authorized to apply for Certification of the following product(s) Product Name: Arm-based IoT Gateway FCC ID : X4D-EMU-200 Trademark: ADLINK on our behalf This is valid until December 31, 2024, or until FCC certification are completed, whichever comes sooner. Date: 2023/10/12 Contact Person / Title: Sean Ba / Senior Engineer Tel.: +886-2-82265877 E- mail: [email protected] Signature:

ADLINK TECHNOLOGY INC. Date: 2023/11/9 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: X4D-EMU-200 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - e.g. Schematics The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Contact Person / Title: Sean Ba / Senior Engineer Tel.: +886-2-82265877 E-mail: [email protected] Signature:

ADLINK TECHNOLOGY INC. No 66 Huaya 1st Rd Guishan District Taoyuan City 333, Taiwan Date : 10/12/2023 UNII Device Declaration Letter To whom it may concern : We have declared below featured for FCC equipment authorization, Device FCC ID : X4D-EMU-200 (1) DFS Device -- Master , Client with Radar detection capability , Client without radar detection capability , N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 5150-5250 Yes , No Yes , No Yes , No Yes , No 5725-5850 Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No (3) Country code selection ability - Yes , No If no, pls explain how it was implemented : This function is disabled via firmware setting. (4) Meet 15.202 / RSS 247 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled) Contact Person / Title: Sean Ba / Senior Engineer Tel.: +886-2-82265877 E-mail: [email protected] Signature:

ADLINK TECHNOLOGY INC. No 66 Huaya 1st Rd Guishan District Taoyuan City 333, Taiwan Date: 2023/10/12 Dear Sir or Madam, Due to the business consideration, we hereby declare that our product of Arm-based IoT Gateway Model: EMU-200-W Serial model: EMU-200L-W The difference of models mentioned above is : Model Description EMU-200-W w/ Web Console; w/ WIFI EMU-200L-W w/o Web Console; w/ WIFI Any questions regarding this declaration, please don’t hesitate to contact us. Sincerely, Contact Person / Title: Sean Ba / Senior Engineer Tel.: +886-2-82265877 E- mail: [email protected] Signature:

ADLINK TECHNOLOGY INC. No 66 Huaya 1st Rd Guishan District Taoyuan City 333, Taiwan Date: 2023/10/24 WIFI Channel 12 & 13 Declaration Letter To whom it may concern : We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability for FCC ID : X4D-EMU-200 Please check Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. _________________ Others Pls explain detail here. Contact Person / Title: Sean Ba / Senior Engineer Tel.: +886-2-82265877 E-mail: [email protected] Signature:

C237004_EUT External Photos Page 1 of 11 External Photos Model Number: EMU-200-W, EMU-200L-W C237004_EUT External Photos Page 2 of 11 EUT Photo (1) EUT Photo (2) WLAN 2.4+5 GHz Ant 1 WLAN 2.4+5 GHz Ant 0 C237004_EUT External Photos Page 3 of 11 EUT Photo (3) EUT Photo (4) C237004_EUT External Photos Page 4 of 11 EUT Photo (5) EUT Photo (6) C237004_EUT External Photos Page 5 of 11 EUT Photo (7) EUT Photo (8) C237004_EUT External Photos Page 6 of 11 EUT Photo (9) EUT Photo (10) C237004_EUT External Photos Page 7 of 11 EUT Photo (11) EUT Photo (12) C237004_EUT External Photos Page 8 of 11 EUT Photo (13) EUT Photo (14) C237004_EUT External Photos Page 9 of 11 EUT Photo (15) EUT Photo (16) C237004_EUT External Photos Page 10 of 11 EUT Photo (17) EUT Photo (18) C237004_EUT External Photos Page 11 of 11 EUT Photo (19) EUT Photo (20)

C237004_EUT Internal Photos Page 1 of 8 Internal Photos Model Number: EMU-200-W, EMU-200L-W C237004_EUT Internal Photos Page 2 of 8 EUT Photo (1) EUT Photo (2) C237004_EUT Internal Photos Page 3 of 8 EUT Photo (3) EUT Photo (4) C237004_EUT Internal Photos Page 4 of 8 EUT Photo (5) EUT Photo (6) C237004_EUT Internal Photos Page 5 of 8 EUT Photo (7) EUT Photo (8) C237004_EUT Internal Photos Page 6 of 8 EUT Photo (9) EUT Photo (10) C237004_EUT Internal Photos Page 7 of 8 EUT Photo (11) EUT Photo (12) C237004_EUT Internal Photos Page 8 of 8 EUT Photo (13)

The Theory of operation For Wi-Fi: TI WL1807 WiLink 8 industrial dual band module provides data connectivity on 802.11a/b/g/n 2x2 MIMO. Wi-Fi function goes through standard SDIO interface. It offers a maximum data rate of 100Mbps (UDP). This module supports the connection of dual frequency bands, 20/40MHz SISO and 20MHz 2x2 MIMO at 2.4GHz. RF_ANT2 and RF_ANT1 support 2.4GHz/5GHz TX / RX. WL1807 Operating temperature: –40°C to +85°C industrial temperature grade, Small form factor: 13.3 × 13.4 × 2 mm and connect with 2 external dipole antenna.

Page 1 of 9 Report Number: USSC237004001 Version: 00 FCC MPE Report Applicant ： ADLINK TECHNOLOGY INC. Product Name ： Arm-based IoT Gateway Trade Name ： ADLINK Model Number ： EMU-200-W, EMU-200L-W Applicable Standard ： 47 CFR § 2.1091 Received Date ： Jul. 03, 2023 Issued Date ： Sep. 26, 2023 Issued by Approved By ： Eurofins E&E Wireless Taiwan Co., Ltd. No. 140-1, Changan Street, Bade District, Taoyuan City 334025, Taiwan (R.O.C.) Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Note: 1.The test results are valid only for samples provided by customers and under the test conditions described in this report. 2.This report shall not be reproduced except in full, without the written approval of Eurofins E&E Wireless Taiwan Co., Ltd. 3.The relevant information is provided by customers in this test report. According to the correctness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory does not take the responsibility. Page 2 of 9 Report Number: USSC237004001 Version: 00 Revision History Version Issued Date Revisions Revised By 00 Sep. 26, 2023 Initial Issue Rowan Hsieh Page 3 of 9 Report Number: USSC237004001 Version: 00 Contents 1. General Information .................................................................................................................... 4 2. Description of Equipment under Test (EUT) ............................................................................ 5 3. RF Exposure Limit ...................................................................................................................... 6 4. RF Exposure Assessment .......................................................................................................... 7 5. Maximum Transmitting Mode Evaluation ................................................................................. 9 6. Result ........................................................................................................................................... 9 7. Conclusion ................................................................................................................................... 9 Page 4 of 9 Report Number: USSC237004001 Version: 00 1. General Information 1.1 Reference Applicable Standard Standard Description Version IEEE C95.1 American National Standard safety levels with respect to human exposure to radio frequency electromagnetic fields, 300 KHz to 100 GHz, New York. 1992 47 CFR § 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. - 47 CFR § 1.1310 Radiofrequency radiation exposure limits. - 1.2 Testing Location Lab Name: Eurofins E&E Wireless Taiwan Co., Ltd. Site Address: ■ No. 140-1, Changan Street, Bade District, Taoyuan City 334025, Taiwan (R.O.C.) Site Address: □ No. 2, Wuquan 5th Rd. Wugu Dist., New Taipei City, Taiwan (R.O.C.) Page 5 of 9 Report Number: USSC237004001 Version: 00 2. Description of Equipment under Test (EUT) Applicant ADLINK TECHNOLOGY INC. No 66 Huaya 1st Rd Guishan District Taoyuan City, 333 Taiwan Product Name Arm-based IoT Gateway Trade Name ADLINK Model Number EMU-200-W, EMU-200L-W Models Different Description Series Description EMU-200-W w/ Web Console; w/ WIFI EMU-200L-W w/o Web Console; w/ WIFI FCC ID X4D-EMU-200 Use Distance 20 cm Antenna Information Antenna Trade Name Model No. Type Gain ANT-0 VSO JR2Q00498-X0 Dipole Antenna 2.4 GHz 2.04 dBi 5150~5350 MHz 2.14 dBi 5725~5850 MHz 2.33 dBi ANT-1 VSO JR2Q00498-X0 Dipole Antenna 2.4 GHz 1.74 dBi 5150~5350 MHz 2.14 dBi 5725~5850 MHz 2.33 dBi Note: The above information of DUT was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 2.1 RF Specification Wi-Fi 2.4G Support type: ☒ 802.11b ☒ 802.11g ☒ 802.11n ☐ 802.11ax Support bandwidth: ☒ 20 MHz ☒ 40 MHz Wi-Fi 5G Operation Band: ☒ U-NII-1 ☐ U-NII-2A ☐ U-NII-2C ☒ U-NII-3 ☐ U-NII-5 Support type: ☒ 802.11a ☒ 802.11n ☐ 802.11ac ☐ 802.11ax Support bandwidth: ☒ 20 MHz ☒ 40 MHz ☐ 80 MHz ☐ 160 MHz Page 6 of 9 Report Number: USSC237004001 Version: 00 3. RF Exposure Limit For devices that operate at larger distances from persons, where there are minimal RF coupling interactions between a device and the user or nearby persons, RF exposure compliance using maximum permissible exposure (MPE) limits is applied. The limits for MPE is listed as below: Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm²) Averaging Time|E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824 / f 2.19 / f (180 / f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 - - F / 1,500 30 1,500-100,000 - - 1.0 30 Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm²) Averaging Time|E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1,842 / f 4.89 / f (900 / f 2 )* 6 30-300 61.4 0.163 1.0 6 300-1,500 - - F / 300 6 1,500-100,000 - - 5 6 f = frequency in MHz. * = Plane-wave equivalent power density. Page 7 of 9 Report Number: USSC237004001 Version: 00 4. RF Exposure Assessment 4.1 Exemption Evaluation Exemption evaluation was performed according to the appendix A and B in KDB447498 D04. The General Sequence for Determination of Procedure demonstrated in Figure A.1 of KDB447498 D04 was applied. Page 8 of 9 Report Number: USSC237004001 Version: 00 4.2 Human Exposure Assessment Due to the design and installation of this product, it is not possible to conduct SAR evaluation. This is because client either manufactures or supplies the antenna(s) that will be used in the installation of this product. Therefore, this product will be evaluated as a mobile device per 47 CFR § 1.1310 titled “Radiofrequency radiation exposure limits”, gener…

Text truncated - open the document above for the full version.

Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 1/40 Regulatory WLAN Antenna Information English Language Required for Intel Regulatory Review / Approval (O EM/ODM or antenna vendor is required to complete this document with platform antenna information. Remove Intel references and make this your own document) Antenna information Vendor Type Antenna Part number (Main) Antenna Part number (Aux) VSO Dipole JR2Q00498-X0 JR2Q00498-X0 Peak gain w/ cable loss (dBi)* 2.4GHz 2400-2483.5 MHz 5.2GHz 5150-5250MHz 5.3GHz 5250-5350MHz 5.6GHz 5470-5725MHz 5.8GHz 5725-5850MHz 6.2GHz 5925-6425MHz 6.5GHz 6425-6525MHz 6.7GHz 6525-6875MHz 7.0 GHz 6875-7125MHz Main 2.04 2.14 2.14 2.04 2.33 1.93 1.73 1.73 1.43 Aux 1.74 2.14 2.14 2.04 2.33 1.93 1.73 1.73 1.43 Address: 7th Floor, No. 880, Zhongzheng Road, Zhonghe District, New Taipei City Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 2/40 Table of contents 1. Applicable test method 2. Test & System Description a. Test setup b. Equipment list 3. Setup photo Section 1. Antenna Assembly Specifications Section 2. Dimensioned Photos or Drawings of Antennas Section 3. Radiation characteristics of antenna loaded in Host Platform Section 4. Antenna Host Platform Location Information Section 5. Antenna dimensional information for SAR evaluation Section 6. Diagram Example of Co-Location Antenna Separation Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 3/40 1. Applicable test methods Host antenna testing under a Full Anechoic Chamber. 2. Test & System Description a. Test setup b. Equipment list 編 號 設備 型號 1 Anechoic Chamber WavePro FFC-600 2 Network Analyzer Agilent 5071C 3 Measurement systems NSI2000 4 RF cable 7M 30M~18GHz Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 4/40 3. Setup photo Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 5/40 Antenna Information Section 1. Antenna Assembly Specifications 1A 1B 1C 1D 1E 1F 1G 1H Antenna Part Number Manufacturer Antenna Type Cable Assembly Part Number and Information Freq Range MHz * Peak Gain W/ Cable loss (dBi) Peak Gain w/o Cable Loss (dBi) Max VSWR Cable Loss (dB) (P/N: JR2Q00498- X0) Main Antenna VSO Dipole (P/N: JR2Q00307-X2) 50 ohm Coaxial length: 20cm diameter: 1.13mm 2400-2483.5 2.04 2.7 2.0 0.66 5150-5250 2.14 3.1 2.0 0.96 5250-5350 2.14 3.1 2.0 0.96 5470-5725 2.04 3 2.0 0.96 5725-5850 2.33 3.5 2.0 1.17 5925-6425 1.93 3.1 2.0 1.17 6425-6525 1.73 2.9 2.0 1.17 6525-6875 1.73 2.9 2.0 1.17 6875-7125 1.43 2.6 2.0 1.17 (P/N: JR2Q00498- X0) Aux Antenna VSO Dipole (P/N: JR2Q00307-X2) 50 ohm Coaxial length: 20cm diameter: 1.13mm 2400-2483.5 1.74 2.7 2.0 0.66 5150-5250 2.14 3.1 2.0 0.96 5250-5350 2.14 3.1 2.0 0.96 5470-5725 2.04 3 2.0 0.96 5725-5850 2.33 3.5 2.0 1.17 5925-6425 1.93 3.1 2.0 1.17 6425-6525 1.73 2.9 2.0 1.17 6525-6875 1.73 2.9 2.0 1.17 6875-7125 1.43 2.6 2.0 1.17  3D Antenna Peak Gain required being test in system basis. Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 6/40 Section 2. Dimensioned Photos and Drawings of Antennas Include the dimensioned photo and drawing of Main antenna here. Main Antenna Drawing: Main Antenna Photo (Front/Back): Note: antenna photo should include L type ruler Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 7/40 Include the dimensioned photo and drawing of Aux antenna here. Aux Antenna Drawing: Aux Antenna Photo (Front/Back): Include front view photo of all 2 antennas here. Antenna Manufacturer: VSO Antenna Part Number: JR2Q00498-X0 (Main), JR2Q00498-X0 (Aux) Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 8/40 Include back view photo of all 2 antennas here. Antenna Manufacturer: VSO Antenna Part Number: JR2Q00498-X0 (Main), JR2Q00498-X0 (Aux) Note: antenna photo should include L type ruler MAIN Antenna AUX Antenna Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 9/40 Section 3. Radiation characteristics of antenna loaded in Host Platform 2400-2500MHz radiation characteristic Main antenna: 2400 MHz Center Frequency 24 00 MHz Three-dimensional (dBi) peak 2.4 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 10/40 Main antenna: 2450 MHz Center Frequency 2450 MHz Three-dimensional (dBi) peak 1.9 Main antenna: 2500 MHz Center Frequency 2500 MHz Three-dimensional (dBi) peak 2.7 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 11/40 Aux antenna: 2400 MHz Center Frequency 24 00 MHz Three-dimensional (dBi) peak 2.4 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 12/40 Aux antenna: 2450 MHz Center Frequency 2450 MHz Three-dimensional (dBi) peak 1.9 Aux antenna: 2500 MHz Center Frequency 2500 MHz Three-dimensional (dBi) peak 2.7 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 13/40 5150-5350MHz radiation characteristic Main antenna: 5150 MHz Main antenna: 5250 MHz Center Frequency 5250 MHz Three-dimensional (dBi) peak 3 Center Frequency 5150 MHz Three-dimensional (dBi) peak 3.1 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 14/40 Main antenna: 5350 MHz Center Frequency 5350 MHz Three-dimensional (dBi) peak 2.8 Aux antenna: 5150 MHz Center Frequency 5150 MHz Three-dimensional (dBi) peak 3.1 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 15/40 Aux antenna: 5250 MHz Center Frequency 5250 MHz Three-dimensional (dBi) peak 3 Aux antenna: 5350 MHz Center Frequency 5350 MHz Three-dimensional (dBi) peak 2.8 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 16/40 5470-5725MHz radiation characteristic Main antenna: 5470 MHz Center Frequency 5470 MHz Three-dimensional (dBi) peak 3 Main antenna: 5600 MHz Center Frequency 5600 MHz Three-dimensional (dBi) peak 2.8 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 17/40 Main antenna: 5725 MHz Center Frequency 5725 MHz Three-dimensional (dBi) peak 3 Aux antenna: 5470 MHz Center Frequency 5470 MHz Three-dimensional (dBi) peak 3 Doc.No.:3.8.05 Rev – 10.4 Regulatory WLAN Antenna Information 18/40 Aux antenna: 5600 MHz Center F…

Text truncated - open the document above for the full version.

802.11a51801.4241.59289.4470.4840.702 802.11n HT2051801.3361.50488.8300.5140.749 802.11n HT4051900.6700.84079.7620.9821.493 Duty Factor (dB) 1/T Minimun VBW (kHz) Duty cycle on time (ms) on+off time (ms) Duty cycle (%) Mode Frequency (MHz) Appendix A:Test Data Page 1 of 6 Report Number: USRC237004001 Version: 01 CHAnt-0Ant-1Ant-2Ant-3 361800018000-- 402000020000-- 481950019500-- 1492000020000-- 1572000020000-- 1652000020000-- 361800018000-- 402000020000-- 481950019500-- 1492000020000-- 1572000020000-- 1652000020000-- 381300013000-- 462000020000-- 1512000020000-- 1592000020000-- 5180 5200 5745 RF power setting in Test SW Mode Frequency (MHz) Test SW Version 802.11aTeraTerm 802.11n HT20TeraTerm 5180 5200 5240 5240 5745 5785 5825 802.11n HT40TeraTerm 5755 5795 5785 5825 5190 5230 Page 2 of 6 Report Number: USRC237004001 Version: 01 Ant-0Ant-1Ant-2Ant-3Total dBmdBmdBmdBmdBmdBm 3612.5514.04---30.00 4014.4215.81---30.00 4813.3514.93---30.00 14912.1712.34---30.00 15711.2911.09---30.00 16510.6010.19---30.00 3612.7214.14---30.00 4014.1315.42---30.00 4813.2214.78---30.00 14911.9712.04---30.00 15711.0110.81---30.00 16510.499.94---30.00 387.749.03---30.00 4611.7113.32---30.00 15110.1710.31---30.00 1599.299.10---30.00 5785 5825 5745 5180 5200 5240 802.11n HT4013.5M 5785 5825 5180 5200 5240 5190 5230 5755 5795 5745 802.11n HT206.5M 802.11a6M Maximum Conducted Output Power Measurement Limit Mode Date Rate or Sub-test CH Frequency (MHz) Average power Page 3 of 6 Report Number: USRC237004001 Version: 01 Ant-0Ant-1Ant-2Ant-3Ant-0Ant-1Ant-2Ant-3 MHzMHzMHzMHzMHzMHzMHzMHz 365180-17.557---30.950-- 405200-20.365---36.530-- 485240-19.099---34.120-- 365180-18.573---31.110-- 405200-20.292---35.530-- 485240-19.283---31.290-- 385190-36.262---45.380-- 465230-36.799---69.670-- Ant-0Ant-1Ant-2Ant-3Ant-0Ant-1Ant-2Ant-3 MHzMHzMHzMHzkHzkHzkHzkHz 1495745-19.556---15120-- 1575785-19.496---15120-- 1655825 -19.425---15120-- 1495745-19.939---15120-- 1575785-20.088---15120-- 1655825-19.827---15120-- 1515755-36.906---33850-- 1595795-36.836---33850-- 802.11a 802.11n HT20 802.11n HT40 Mode Band III + IV_6 dB & 99 % RF Bandwidth Measurement CH Freq. (MHz) 99 % Bandwidth 6 dB Bandwidth Freq. (MHz) 26 dB & 99 % RF Bandwidth Measurement 26 dB Bandwidth 802.11n HT40 99 % Bandwidth 802.11n HT20 802.11a ModeCH Page 4 of 6 Report Number: USRC237004001 Version: 01 Ant-0Ant-1Ant-2Ant-3Total dBm/MHzdBm/MHzdBm/MHzdBm/MHzdBdBm/MHzdBm/MHz 36 5180-3.148--0.484 3.63217.000 40 5200-4.736--0.484 5.22017.000 48 5240-3.799--0.484 4.28317.000 36 5180-3.083--0.514 3.59717.000 40 5200-4.640--0.514 5.15417.000 48 5240-3.318--0.514 3.83217.000 38 5190--5.342--0.982 -4.36017.000 46 5230--0.696--0.982 0.28617.000 Note: Power Density = measured result + 10 log (1/duty cycle) + Conversion ratio = measured result + duty facto…

Text truncated - open the document above for the full version.