X9PBKB76FBluetooth Keyboard

BL-BKB76F Bluetooth Keyboard Manual Packing Include: 1,A Bluetooth keyboard 2,A list of manual 3,USB charging cable Product Features: 1, With Broadcom20730 as main control chip , with Bluetooth 3.0 interface . 2, Use industry-leading Bluetooth solution, WIDCOMM BTW Bluetooth software which is specified software by Microsoft official. 3, Buit-in power management software, It can automatically show the available capacity in the Microsoft Windows 4, Silence design, It will not affect other people’s rest 5, Architecture design provides comfortable handing fell. 6, Work with PC and commerical mobile , It will be convenient to work . 7, Working temperaturer :-20°C-55 humidity:20%°C-50% 8.Built-in lithium battery, you do not need to frequently change battery Specifications 1, Executive standard: Bluetooth V3.0 2，Working distance: 10 meters 3, Modulation system: FHSS 2.4G 4, Transmitting power: Class 2 5, Operating voltage: 3.7V 6, Work current: <3.0MA 7, Standby current: 2.0MA 8, Sleeping current: <60UA 9, Charging current:> 100MA 10, Standby time: 200days 11, Theory of working Time: 22 days 12, Uninterrupted working time: 90 hours 13, Charging time: 2.5-3.5 hours 14, Li-ion battery Capacity: Minimum 280MAH 15, Lithium battery life: 3 years 16, Lithium battery Specifications: 3.0 * 24 * 47MM 17, Key strength: 60± 40g 18, Key life: 500 million 19, Operating temperature: -20 - +60 °C 20, Storage temperature: -30 - +70 °C Note: When you switch on the keyboard, the power light and Bluetooth light will be on in three seconds , at this time the keyboard do not connnect with any device.,But the LED light will automatically be off if the keyboard still do not connected to any device after the Led keep lighting for 5 seconds. The keyboard can connect when you switch on after your first successfully use ,the power light will keep lighting ,but the bluetooth light will be off after it successfully connect to device . Install Bluetooth Keyboard 1, How to install bluetooth keyboard into IPAD (1), As shown, Turn on the toggle switch ,power light and Bluetooth light will be on in 3 seconds , But after keep lighting for 5 seconds , it will be off .At this time the keyboard is in working situation . (2),Press the connect button ,the Bluetooth light will be flashing , Power light will be lighting ,so the keyboard is in connecting situation . （3) Click setting of the screen of the Ipad .Ipad will in setting area , then choose Bluetooth , open the bluetooth ., Ipad is in searching bluetooth keyboard working situation . (4): Enter the password and connect Note There will not have any prompt , just click enter after your enter passwork in the Ipad screen ..It will be connected successfully. (5): Connect successfully , The keyboard is in working situation Keyboard and iPad hotkeys specifies Press this button can return home page. Press this button can control IPAD screen brightness drop. Press this button can control IPAD screen brightness increases. IPAD locked in on this key, IPAD into the screen saver pictures interface. When in use IPAD edit the document by this button to call up and hidden IPAD virtual keyboard. IPAD in boot state, press this button can enter the IPAD search page. When the IPAD in music broadcast, click this button can control music upgrade a. IPAD in boot state, press this button can control the play/pause music. When the IPAD in music broadcast, click this button can control music downwards a. Press this button can be mute, click again, hold "cancel mute . Press this button can to reduce the volume. Press this button can to increase the volume. Press this button can lock IPAD screen. Charge The power light keep flashing in your working ,the keyboard is short of power . It is time to charge the keyboard . Charging procedure as follows： （1）、Use the IPAD charger/USB charger cable plug into outlet, put one end of the plug into keyboard charging interface，as follows, 2)at this time will indicator , when the batteries will be destroyed after indicator. (theory charging time for 4.5 hours) Storage (1)、When you are finished using your keyboard or you will be required after the keyboard to carry , so don't forget to set aside the keyboard to switch the source OFF, turn off the keyboard's power to extend battery life (2)When you need a long time storage your keyboard, please don't forget to pack the battery power, about half of the filling , then store your keyboard, so can make your keyboard lithium life longer. FAQ: 1. If unable to connect the Bluetooth Keyboard to the computer, or the Keyboard work unconventionally, please try the steps below: (1),Before you install your Bluetooth Keyboard, please make sure you have done the Bluetooth Dongle installation procedure, and the Bluetooth facility is turned on. (2),Press and release the connect button on the bottom of Bluetooth Keyboard. The red led light will change into a flashing mode. (3),Make sure that the keyboard is within the effective range---10M. (4),Make sure that there’s no change of the Bluetooth facility. If anything changed, please kindly rematch. (5),If your Bluetooth facility is connected to other Bluetooth products, please kindly confirm that the speed of the Bluetooth facility is enough. (6),Please kindly check the batteries. If they are short of power, replace them for new ones. (7),Please make sure that your Bluetooth Dongle is damaged or not . Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device. Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if no installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try …

Text truncated - open the document above for the full version.

Shenzhen Paoluy Silicone Technology Co., Ltd. FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We, (the approval holder) Com pany name Shenzhen Paoluy Silicone Technology Co., Ltd. Address No.31, Furong Road, Gushu Village, Xixiang Town, Bao’an District, City Shenzhen Country China declare that the following representative (agent): Name (person) Daniel Zhu Company name Anbotek Compliance Laboratory Limited Addresss 1/F, 1 /Build, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Bluetooth Keyboard Type or Model(s) BKB76F Tradename or Brand(s) N.A. We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen 2012-07-16 Xiaogang Yang Quality Director

Shenzhen Paoluy Silicone Technology Co., Ltd. FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Shenzhen Paoluy Silicone Technology Co., Ltd. Address No.31, Furong Road, Gushu Village, Xixiang Town, Bao’an District, City Shenzhen Country China request for this certification filing under: Grantee Code Product Number FCC ID: X9P BKB76F to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Description √ Operational Description Cruit Description.pdf explaining the functioning of the block diagram √ Block Diagrams Block Diagram.pdf showing the systematic building blocks of the EUT √ Schematics Diagrams SCH.pdf showing components, their values and interconnection Bill of Materials List of components used on the PCB’s of the EUT Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen 2012-07-16 Xiaogang Yang Quality Director

Page 21 of 23 FCC ID: X9PBKB76F Anbotek Compliance Laboratory Limited Report No.201206826F APPENDIX I (ExternalPhotos) Figure 1 The EUT-Overall View Figure 2 The EUT-Back View

FCC ID Label Sample for FCC ID: X9PBKB76F FCC ID: X9PBKB76F This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

The proposed Label Location on EUT Proposed FCC ID Label Location Proposed Label Location on EUT The EUT-Back View/Proposed FCC ID Label Location

Page 22 of 23 FCC ID: X9PBKB76F Anbotek Compliance Laboratory Limited Report No.201206826F APPENDIX II(InternalPhotos) Figure 3 The EUT-Inside View Figure 4 PCB of the EUT-Front View Page 23 of 23 FCC ID: X9PBKB76F Anbotek Compliance Laboratory Limited Report No.201206826F Figure 5 PCB of the EUT-Back View Figure 6 PCB of the EUT-Front View(BT Module)

Page 1 of 23 FCC ID: X9PBKB76F Anbotek Compliance Laboratory Limited Report No.201206826F FCC TEST REPORT for Shenzhen Paoluy Silicone Technology Co., Ltd. Bluetooth Keyboard Model No.: BKB76F Report Number : 201206826F Date of Test : Jul. 02~12, 2012 Date of Report : Jul. 15, 2012 Prepared for : Shenzhen Paoluy Silicone Technology Co., Ltd. Address : No.31, Furong Road, Gushu Village, Xixiang Town, Bao’an District, Shenzhen Prepared By : Anbotek Compliance Laboratory Limited Address : 1/F, 1 /Building, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District, Shenzhen, 518054, China Tel: (86) 755-26066544 Fax: (86) 755-26014772 Page 2 of 23 FCC ID: X9PBKB76F Anbotek Compliance Laboratory Limited Report No.201206826F TABLE OF CONTENTS Description Page Test Report 1.GENERAL INFORMATION ..........................................................................................................4 1.1.Description of Device (EUT).....................................................................................................................4 1.2.Auxiliary Equipment Used during Test .....................................................................................................5 1.3.Description of Test Facility .......................................................................................................................6 1.4.Measurement Uncertainty..........................................................................................................................6 2. MEASURING DEVICE AND TEST EQUIPMENT.................................................................... 7 3. TEST PROCEDURE ....................................................................................................................... 8 4. CONDUCTED LIMITS .................................................................................................................. 9 4.1. Block Diagram of Test Setup ...................................................................................................................9 4.2. Power Line Conducted Emission Measurement Limits (15.207) .............................................................9 4.3. Configuration of EUT on Measurement ...................................................................................................9 4.4. Operating Condition of EUT ....................................................................................................................9 4.5. Test Procedure ........................................................................................................................................10 4.6. Power Line Conducted Emission Measurement Results ........................................................................10 5. RADIATION INTERFERENCE.................................................................................................. 13 5.1. Requirements (15.249, 15.209): .............................................................................................................13 5.2 Test Procedure .........................................................................................................................................13 5.3 Test Results..............................................................................................................................................13 6. OCCUPIED BANDWIDTH..........................................................................................................17 6.1. Requirements (15.249): ..........................................................................................................................17 6.2. Test Procedure ........................................................................................................................................17 6.3. Test Configuration:.................................................................................................................................17 6.4. Test Results.............................................................................................................................................17 7. PHOTOGRAPH.......................................................................................................................... 20 7.1. Photo of Power Line Conducted Emission Measurement ......................................................................20 7.2. Photo of Radiation Emission Test ..........................................................................................................20 APPENDIX I (ExternalPhotos) (1 Page) APPENDIX II(InternalPhotos) (2 Pages) Page 3 of 23 FCC ID: X9PBKB76F Anbotek Compliance Laboratory Limited Report No.201206826F TEST REPORT Applicant : Shenzhen Paoluy Silicone Technology Co., Ltd. Manufacturer : Shenzhen Paoluy Silicone Technology Co., Ltd. EUT : Bluetooth Keyboard Model No. : BKB76F Serial No. : N/A Rating : DC 3.7-4.2V, 5-7mA Trade Mark : N/A Measurement Procedure Used: FCC Part15 Subpart C, Paragraph 15.207, 15.249 & 15.209 The device described above is tested by Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 15 Subpart C requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Anbotek Compliance Laboratory Limited Date of Test : Jul. 02~12, 2012 Prepared by : (Tested Engineer / Andy Chen) Reviewer : (Project Manager / Jerry Du) Approved & Authorized Signer : (Manager / Tom Chen) Page 4 of 23 FCC ID: X9PBKB76F Anbotek Compliance Laboratory Limited Report No.201206826F 1. GENERAL INFORMATION 1.1. Description of Dev…

Text truncated - open the document above for the full version.

Page 20 of 23 FCC ID: X9PBKB76F Anbotek Compliance Laboratory Limited Report No.201206826F 7. PHOTOGRAPH 7.1. Photo of Power Line Conducted Emission Measurement 7.2. Photo of Radiation Emission Test