XBYWXD189RXWIRELESS REMOTE CONTROL-RX

Wireless Remote Control User Manual (WXD-189RX) Thank you for your purchase of Phottix product and viewing this instruction manual,be sure to read and understand this manual and the instruction manual of the camera entirely before use,so that you can use it correctly and expertly.we will spare no effort to add oges to your photograph.you can realize the use method and precautions easily through this manual. 1.Product description: Cleon is a remote control with radio frequency,the Working voltage as well as the electric current of the receiver is low,so it saves power safety,with strong anti interference ability.Smart code setting:Frequency pre-set in production.so you can use the remote instantly.in case change code in usage,press five times continuously the Set/ switch on receiver until light blinks,press the shutter button on transmitter one time to confirm the code.you can do this way to unlimited receivers with one transmitter.the Smart code system has up to 16,000,000 combination codes ,it can operate within the working distance of 100 meters (without obstacles)with no interference,In order to adapt to the specific shooting environment. 2．Parts of product： 3．Specification: 1).battery:one CR2 3V battery 2).standby current:1.2mA;Dormancy current:1uA 3).max. distance:100m(without obstacles) 4).frequency:433.92Mhz 5).Receiving sensitivity:-98dBM 4. Operating Instructions: SET/POWER button : has two fuctions,that is on/off and code setting. After installing the battery,keep pressing the button for 3 seconds,it is starting up,then keep pressing it for 3 seconds,it is turned off;when it is on,we press it continuously 5 times,then the indicator light blinks,we can have code setting now，then press the release button on the transmitter to confirm working.. 1).use method of wired remote: ①Set to ON position on receiver,take the 2.5mm cable to connect the 2.5mm socket of receiver and the shutter port of camera. ②Pressing the release button on the receiver manually to autofocus and take photos. The usage of Long Exposure:switch the receiver to the Hold position,then the camera has long exposure. 2).the usage of wireless remote: ①When the camera is off,switch the receiver to the ON position,take the 2.5mm cable to connect the 2.5mm socket of receiver and the shutter port of camera,after that,turn on the camera and the receiver; ②after the successful code setting,the transmitter can control the receiver,so that it can control the camera's sets,such as single shot mode, 2 seconds delay, continuous, as well as bulb mode for long exposures. Precautions: 1)This product belongs to the accessory of electronic product,maybe Because of the external environment factors,there is something wrong with the cameras,but it is a small probability event,do not panic. 2)please turn off the receiver,and take out the battery for long time unused. 3)Don't drag the cable when it is connected to the camera. 4)Don't put it in the high temperature places,such as the Enclosed vehicles and the control panels. 5)keep dry:Don't touch the product with wet hands,and it may be malfuction if immersed in or exposed to water. 6)Don't use it in the places where the materials can easily get fire and explosion. FCC ID: XBYWXD189RX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Contact Tel : (86) 0755-61116103 Contact Fax : (86) 0755-61116101 E-Mail: [email protected]

Block diagram for receiver MCU Receiver amplifier 433.92MHZ Power on/off Power supply Led1 Led2 2.5mm signal out WXD-189 RX

Report No.: TB-F095957 Shenzhen Toby Technology Co., Ltd. FCC ID : XBYWXD189RX Page 2 of 5 EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS Photo 1 Appearance of EUT Photo 2 Appearance of EUT

Report No.: TB-F095957 Shenzhen Toby Technology Co., Ltd. FCC ID : XBYWXD189RX Page 1 of 5 EXHIBIT 1- PRODUCT LABELING FCC ID Label Sample FCC ID: XBYWXD189RX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID Label Location on EUT FCC ID LOCATION

Report No.: TB-F095957 Shenzhen Toby Technology Co., Ltd. FCC ID : XBYWXD189RX Page 3 of 5 EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS Photo 3 Inside of EUT Photo 4 Appearance of PCB Report No.: TB-F095957 Shenzhen Toby Technology Co., Ltd. FCC ID : XBYWXD189RX Page 4 of 5 Photo 5 Appearance of PCB

Circuit Description (Receiver WXD-189RX) The receiver¡s version is WXD-189RX, it is a wireless remote. Using the advanced automatic smart code setting, it goes on code setting without using code switch, so it is convenient and easy to operate. The standby power is low because of being controlled by macro chip, the circuit is made of several parts; 1. CPU working parts, the producing of radio signal and the controlling of the smart code. 2. The RF frequency signal receiving circuit, can receive the radio signal from space transmission. 3. LED indicator light and output signal control circuit.

A B C DD C B A R6 100K +3V 1 2 4 3 SW1 2STAGE R101K R111K LED1 OBJ RG C2 47uF/10V Antenna IOA0 1 IOB7 2 IOB6 3 VDD 4 IOB5 5 IOB4 6 IOB3 7 IOB2 8 IOB1 9 IOB0 10 VSS 11 IOA3 12 IOA2 13 IOA1 14 U2AT8P53 RF_D RF_D +3V RED GREEN RED GREEN R4100 R3100 OUT1 R810K Q2 C945 R9 100K OUT2 R110K Q1 C945 R2 100K FOCUS CTL SHUT CTL 5 5 1 1 2 2 3 3 4 4 J1 5p R121K LED2 PWR +3V SCL 1 VSS 2 SDA 3 VCC 4 WP 5 U124LC01BT-1/OT C3 105 R5 10K SCL SDA SW2 learn PWR SCL SDA OUT1OUT2 PWR FOCUS CTL SHUT CTL 1 2 3 4 J2 433.92Mhz +3V RF_VCC RF_VCC LEARN LEARN HOLD SW3 HOLD FOCUS CTL SHUT CTL Denomination Sheet of: 1/1 revision 17-November-2009 Yuan Gui Li Auditing Date Yuan Bo Chen Shenzhen Fudasi Technology Co.,Ltd. WXD-189RX VCC GP23A

Report No.: TB-F095957 Shenzhen Toby Technology Co.,Ltd. FCC ID : XBYWXD189RX Page 1 of 10 FCC PART 15.109 MEASUREMENT AND TEST REPORT For EUT Name: Wireless Remote Control Item No.: WXD-189RX FCC ID: XBYWXD189RX Serial No.: Not supplied by client Report Number : TB-F095957 Date of Test : Dec. 07-11, 2009 Date of Report : Dec. 14-16, 2009 Prepared for : Shenzhen Fudasi Technology Co., Ltd. B Building, Shengde Industrial Park, DaLang,Longhua Town, Baoan District, Shenzhen City, China Prepared By : Shenzhen Toby Technology Co., Ltd. 10/F., A Block, Jiada R & D Bldg., No.5 Songpingshan Road, Science & Technology Park, Nanshan District, Shenzhen, China TEL : 0086-18925263335 Report No.: TB-F095957 Shenzhen Toby Technology Co.,Ltd. FCC ID : XBYWXD189RX Page 2 of 10 TABLE OF CONTENTS TEST REPORT DECLARATION................................................................................................ 3 1. GENERAL INFORMATION .................................................................................................... 4 1.1. Product Description for Equipment Under Test (EUT).................................................... 4 1.2. Test Standards................................................................................................................... 4 1.3. Related Submittal(s)/Grant(s) ........................................................................................... 5 1.4. Test Methodology ............................................................................................................. 5 1.5. Accessories Equipment List and Details .......................................................................... 5 1.6. EUT Cable List and Details .............................................................................................. 5 1.7. Test Location .................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................................ 6 3. §15.109(A) - RADIATED EMISSION ...................................................................................... 7 3.1. Measurement Uncertainty................................................................................................. 7 3.2. Test Equipment List and Details....................................................................................... 7 3.3. Test Procedure ..................................................................................................................7 3.4. Corrected Amplitude & Margin Calculation .................................................................... 8 3.5. Environmental Conditions ................................................................................................ 8 3.6. Test Receiver Setup .......................................................................................................... 8 Report No.: TB-F095957 Shenzhen Toby Technology Co.,Ltd. FCC ID : XBYWXD189RX Page 3 of 10 TEST REPORT DECLARATION Applicant : Shenzhen Fudasi Technology Co., Ltd. Manufacturer : Shenzhen Fudasi Technology Co., Ltd. EUT Description : Wireless Remote Control Model No. : WXD-189RX The device described above is tested by SEM. Test Compliance Service Co., Ltd. to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart B limits for both radiation and conduction emissions. The measurement results are contained in this test report and Shenzhen Toby Technology Co., Ltd. is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT to be technically compliant with the FCC official limits. This report applies to above tested sample only. This report shall not be reproduced in part without written approval of Shenzhen Toby Technology Co., Ltd. Reported by: Date: Dec. 16, 2009 (Jacky Wang) Reviewer: Date: Dec. 17, 2009 (Benny Xu) Approved by: Date: Dec. 18, 2009 (Justin Zhang) Report No.: TB-F095957 Shenzhen Toby Technology Co.,Ltd. FCC ID : XBYWXD189RX Page 4 of 10 1. GENERAL INFORMATION 1.1. Product Description for Equipment Under Test (EUT) Client Information Applicant: Shenzhen Fudasi Technology Co., Ltd. Address of applicant : B Building, Shengde Industrial Park, DaLang,Longhua Town,Baoan District, Shenzhen City, China Manufacturer: Shenzhen Fudasi Technology Co., Ltd. Address of manufacturer: B Building, Shengde Industrial Park, DaLang,Longhua Town,Baoan District, Shenzhen City, China General Description of E.U.T Items Description EUT Description: Wireless Remote Control Trade Name: / Model No.: WXD-189RX Rated Voltage: DC 3V Batteries Frequency Range: 433.92MHz Tape of Antenna: Internal Antenna Size: 6.0cm x 3.8cm x 2.8cm For more information refer to the circuit diagram form and the user’s manual. The test data is gathered from a production sample, provided by the manufacturer. 1.2. Test Standards The following report is prepared on behalf of the Shenzhen Fudasi Technology Co.,Ltd. in accordance with Part 2, Subpart J, and Part 15, Subparts A and B of the Federal Communication Commissions rules. The objective is to determine compliance with FCC Part 15, Subpart B, and section 15.205, 15.107, and 15.109 rules. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission/immunity, should be checked to ensure compliance has been maintained. Report No.: TB-F095957 Shenzhen Toby Technology Co.,Ltd. FCC ID : XBYWXD189RX Page 5 of 10 1.3. Related Submittal(s)/Grant(s) No Related Submittal(s). 1.4. Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2009, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. The equipment under test (EUT) was con…

Text truncated - open the document above for the full version.

Report No.: TB-F095957 Shenzhen Toby Technology Co., Ltd. FCC ID : XBYWXD189RX Page 5 of 5 Photo 6 Radiation Emission Test