XGK-C-ONE-LF-AGRC-One2 LF AGRIDENT

C-One² Quick Start and Regulatory Guide QSG 180190 B00 Siège social 185 avenue Archimède 13857 Aix-en-Provence Cedex 3 • France • Tel. +33(0)4 42 65 25 65 • Fax +33(0)4 42 51 57 32 SAS au C api t al d e 10 0 0 00 E ur o s • R CS A IX 50 9 05 9 5 72 • SI RE T: 5 09 05 9 572 0 00 16 • APE 6 20 1Z • TV A: F R 5 8 5 0 9 0 59 57 2 C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr COPPERNIC C-One² LF AGRIDENT C-One Product Overview Microphone Flash Scanner Hand Strap Holder Power Key Programmable Key (P3) Scan Key/Programmable Key (P1) Camera Speaker NFC/RFID Area LED Indicators (P2) C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr Setting up your phone MICRO SIM CARD INSTALLATION Open Micro SD/Micro SIM door. To remove the Micro SIM card: Insert a removal tool (pin type) into the hole then push until the tray pops out. Put the Micro SIM card on the tray. Insert Micro SIM tray into SIM slot. Close the door after installation. MICRO SD CARD INSTALLATION ® Open Micro SD/Micro SIM door. ® Insert Micro SD card into Micro SD card slot. ® Close the door after installation. C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr Caution: Failure to completely reseal the SIM/microSD card slot cover may lead to water or other liquids entering the casing, which may cause damage to the phone. Note: Micro SIM card and Micro SD card should be purchased separately. C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr CHARGE THE BATTERY Before using the C-ONE², charge the battery using one of the following accessories approved by COPPERNIC: Micro USB cable + Power Adaptor Jack (included in package) and insert the cable to Micro USB hole Cradle Charging + DC Power Cable + Power Adaptor Jack C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr LED INDICATORS Red LED blinks (LED1) Low battery Red LED (LED1) Battery is charging Green LED (LED1) Battery is fully charged Blue LED blinks (LED2) BT devices connected or receiving messages/notifications CAUTION: Please make sure the device being charged fully when using C-ONE² at first time. Please ensure the Micro USB port clean and dry before inserting a USB cable for charging to avoid the operating issues on the device. Please remove water or moisture from the Micro USB port instantly with soft cloth when the device gets wet, to avoid the operating issues on the device. LED1 LED2 C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr Using Your Phone TURNING ON/OFF YOUR PHONE To turn on the phone, press and hold the power button during 5s. To turn off the phone, press the power button and select “Power off” in the dialog box. To reset the phone, press and hold the power button during 30s. Note: Device turns to the modes as below by pressing power button key. u Suspend Mode Press and release the power button to place the device in suspend mode. The display will be off and go into a low power state to conserve battery power. u Reboot Press and hold the power button, and select “Reboot” in the dialog window to restart the device. DATA CAPTURE (BARCODE SCANNER) Scan Demo with the Imager: ® Install the “Scan SDK” provided separately by COPPERNIC (SDK includes API service and the demo application) Side-Key Remapping for scanning: Go to “Settings”à Select “Remap button & Shortcut” Select the key (P1, P2- blue side keys) à Tap Remap Keyà Tap Barcode Scan The red laser aiming pattern turn on to assist in aiming, scan ready when beep sounds. Release the scan button. C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr Using barcode scanning reader as keyboard input: 1. Tap “Demo” apk -> Tap -> Select “Settings” -> Enable “Keyboard Simulation” to replace physical key input on keyboard with scanning input. 2. Choose barcode symbolizes Tap “Demo” apk -> Tap -> Select “Settings” -> Tap “Enable/Disable” under symbology configuration -> Tap “Symbology Config”. Note: Please remove the protector film before using scanner. CAUTION: CLASS 2 LASER WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW WITH OPTICAL INSTRUMENTS. COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC/EN 60825-1:2014 RFID For C-One² HF ASK with RFID option, to read put the TAG/CARD on the RFID area. RFID Reading area C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr For C-One² LF AGRIDENT with RFID option, to read put the TAG/CARD on the RFID area. PHOTO & VIDEOS Using the rear camera to take photos and capture video. 1. Go to Home Screenà select “Camera”à Tap camera icon or screen to take a picture/switch to video icon and tap for video recording. 2. Using the rear camera to take photos and capture video. Note: Ensure device memory or extend Micro SD card space is available. RFID Reading area RFID Reading area (Option: Stick LF AGRIDENT antenna) C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr Regulatory Information Caution: Only use COPPERNIC approved accessories. Operating Frequencies l C-ONE² EUT Type Handheld Device Brand Name COPPERNIC Model Name C-ONE²/C-ONE²(WOS) Tx Frequency Bands (Unit: MHz) GSM900 : 880 ~ 915 GSM1800 : 1710 ~ 1785 WCDMA Band I : 1920 ~ 1980 WCDMA Band VIII : 880 ~ 915 LTE Band 1 : 1920 ~ 1980 LTE Band 3 : 1710 ~ 1785 LTE Band 7 : 2500 ~ 2570 LTE Band 8 : 880 ~ 915 LTE Band 20 : 832 ~ 862 LTE Band 28 : 703 ~ 748 WLAN : 2412 ~ 2472, 5180 ~ 5320, 5500 ~ 5700 Bluetooth : 2402 ~ 2480 RFID options : 13.56MHz / 134.2KHz GPS : 1575.42 Maximum AVG Conducted Power (Unit: dBm) GSM900 : 33.78 GSM1800 : 31.12 WCDMA Band I : 23.68 WCDMA Band VIII : 23.77 LTE Band 1 : 24.52 LTE Band 3 : 23.98 LTE Band 7 : 23.97 LTE Band 8 : 23.99 LTE Band 20 : 23.99 LTE Band 28 : 23.94 C-One² Quick Start and Regulatory Guide QSG 180190 B00 www.coppernic.fr 802.11b : 15.83 802.11g : 16.72 802.11n HT20 (2.4GHz) : 16.76 802.11n HT40 (2.4GHz) : 15.83 802.11a : 15.13 802.11n HT20 (5GHz…

Text truncated - open the document above for the full version.

COPPERNIC DATE :2020-3-23 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: XGK-C-ONE-LF-AGR Product Name: C-One² LF AGRIDENT Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: · Schematics and part list · B lock diagram · Operation description and Tune up T hese materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2020-3-23 By: Marc Piepers Signature Printed Title: Director of Engineering On behalf of : COPPERNIC Telephone: 0033442652576

COPPERNIC Date: 2020-3-23 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize C ompliance Testing, LLC t o act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these m atters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Dated this 2020-3-23 By: Marc Piepers Signature Printed Title: Director of Engineering On behalf of : Director of Engineering Telephone: 0033442652576

COPPERNIC DATE:2020-3-23 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint Shenzhen Zhongjian Nanfang Testing Co.,Ltd.; 1st Floor, Block No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China；Bruce.Zhang, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with 185 avenue Archimede, 13857 Aix en Provence, FRANCE Dated this 2020-3-23 By: Marc Piepers Signature Printed Title: Director of Engineering On behalf of : COPPERNIC Telephone: 0033442652576

Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 44 of 75 8 EUT Constructional Details Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 45 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 46 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 47 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 48 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 49 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 50 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 51 of 75

label location

Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 52 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 53 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 54 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 55 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 56 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 57 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 58 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 59 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 60 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 61 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 62 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 63 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 64 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 65 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 66 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 67 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 68 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 69 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 70 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 71 of 75 Report No: CCISE191107101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 72 of 75 Report No: CCISE191107101 Shenzhen Z…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE191107102V01 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC & IC REPORT (Bluetooth) Applicant: COPPERNIC Address of Applicant: 185 avenue Archimede, 13857 Aix en Provence, FRANCE Equipment Under Test (EUT) Product Name: C-One² LF AGRIDENT Model No.: C-One Trade mark: COPPERNIC FCC ID: XGK-C-ONE-LF-AGR Canada IC: 8402A-CONELFAGR Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 RSS-Gen Issue 5, April 2018 RSS-247 Issue 2, February 2017 Date of sample receipt: 11 Nov., 2019 Date of Test: 12 Nov., 2019 to 10 Mar., 2020 Date of report issued: 02 Apr., 2020 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCISE191107102V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 56 2 Version Version No. Date Description 00 11 Mar., 2020 Original 01 02 Apr., 2020 Update page1, Update IC ID number Tested by: Date: 02 Apr., 2020 Test Engineer Reviewed by: Date: 02 Apr., 2020 Project Engineer Report No: CCISE191107102V01 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 56 3 Contents Page 1 COVER PAGE ................................................................................................................................................... 1 2 VERSION ........................................................................................................................................................... 2 3 CONTENTS ....................................................................................................................................................... 3 4 TEST SUMMARY .............................................................................................................................................. 4 5 GENERAL INFORMATION .............................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. ............................................................................................................ 5 5.3 TEST ENVIRONMENT AND TEST MODE ......................................................................................................... 6 5.4 DESCRIPTION OF SUPPORT UNITS ............................................................................................................. 6 5.5 MEASUREMENT UNCERTAINTY .................................................................................................................. 6 5.6 LABORATORY FACILITY ............................................................................................................................. 6 5.7 LABORATORY LOCATION ........................................................................................................................... 7 5.8 TEST INSTRUMENTS LIST ........................................................................................................................... 7 6 TEST RESULTS AND MEASUREMENT DATA ............................................................................................. 8 6.1 ANTENNA REQUIREMENT........................................................................................................................... 8 6.2 CONDUCTED EMISSIONS ........................................................................................................................... 9 6.3 CONDUCTED OUTPUT POWER ................................................................................................................. 12 6.4 20DB OCCUPY BANDWIDTH .................................................................................................................... 15 6.5 CARRIER FREQUENCIES SEPARATION ...................................................................................................... 20 6.6 HOPPING CHANNEL NUMBER ................................................................................................................... 24 6.7 DWELL TIME ........................................................................................................................................... 26 6.8 PSEUDORANDOM FREQUENCY HOPPING SEQUENCE ................................................................................ 29 6.9 BAND EDGE ................................................................................................…

Text truncated - open the document above for the full version.

Report No: CCISE191107102 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 55 of 56 7 Test Setup Photo Radiated Spurious Emission Below 1GHz Above 1GHz Report No: CCISE191107102 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1911071 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 56 of 56 Conducted Emission 8 EUT Constructional Details Reference to the test report No. CCISE191107101 ------End of report------