XS8-CONV3Majestouch Convertible 3

EN CN TW KR Majestouch Convertible 3 Majestouch Convertible 3 Majestouch Convertible 3 Majestouch Convertible 3 1 ON 2 3 4 5 6 7 PC : When installing with a wired connection, please use a Windows PC that has a USB port. OS Windows XP Service Pack 2 or higher version, Windows Vista, 7, 8, 8.1, 10, 11 If using Bluetooth connection, the personal computer must be equipped with Bluetooth function or have a Bluetooth adapt- er. Nevertheless, due to toggling, there might be situations whereby it is unable to connect. Therefore, not all Bluetooth adapters are supported. * When installing Bluetooth connection, please ensure to use the mouse for operations. When installing with a wireless connection, please use a Windows PC that has a Bluetooth HID Profile. System Requirements Cherry MX Key Switch Cherry MX key switch is a mechanical switch manufactured by CHERRY GmbH, Germany. Its depth differs from standard keyboards, it has more depth, the keystroke depth is approximately 4mm, the actuation point is at approximately 2mm, and it has a higher spring distance. Because this product has an independent key switch, therefore the operation of the key is brisk. FR-4 2-Layer Circuit Board We have introduced the new 2-layer printed circuit board FR-4 (fiberglass board), thus enhancing the basic performance. All terminals are through-holes, and are securely soldered, so as to effectively prevent any influence from vibrations and loads to the base and copper foil wirings during typing. Therefore, this product has been improved for durability, reliability and keys operational performance. 2way Keyboard USB wired connection and Bluetooth wireless connection USB Connection May use the USB cable supplied with the product for operations. (This product is not equipped with battery recharging function.) Bluetooth Connection This product uses the technique of standard Bluetooth Version 5.1 Class 2 Specification to enhance the power saving function of the personal computer during the connection. This way; a wireless operating environment may be enjoyed. The supported range for the product is within approximately 10m. Performing the computer connection setup is only required for the first time. Henceforth, future usage does not require installation setup. A maximum of four units of personal comput- ers may be connected and toggled randomly. Besides using power from batteries, power may also be supplied by the USB cable from the USB. When using battery power, if there is no activity for more than 30 minutes, it will automatically enter into power saving mode, to save electrical consumption. Product Overview Thank you for purchasing the FILCO Majestouch Convertible 3 Bluetooth Keyboard. Please read carefully the Attention Items published in this manual. Health Issues Attention Items If you have been using a mouse, keyboard, trackball mouse for a prolong period of time, the stress to your hand, wrist, head or shoulder might result in pain or numbness in these areas. If you continue to use repeatedly, it might result in serious injuries. When you encounter any of the above-mentioned discomforts, please stop using the mouse and keyboard immediately, and it is recommended that you consult a professional doctor. When using a personal computer, please rest periodically, and please take care not to add stress to your hand, wrist, head and shoulder. Attention Items During Communication • Please use in an environment where there are no obstructions and where there is good reception. The distance for reception may vary, depending on the building structure and influence from obstructing objects. When sandwiched between steel, metals and concrete, the signal might not come online. • If user moves to a location where there is an obstruction to the communication and where there is no wireless signal, under such circumstances, the communication connectivity will be terminated. • During connection, please ensure a distance of at least 2m away from any AV or OA equipment. In addition, microwaves tend to influence signals. Therefore, during connection, please maintain a distance of at least 3m away, or else the connection will not be successful. • IEEE802.11g/b wireless LAN mechanism and the Bluetooth mechanism in our product uses the same frequency (2.4GHz), if the distance is too near during use, it might result in wave interference, affecting connection speed or unable to connect. Under such circumstances, please switch off the power of the device that is not in use. • Electromagnetic waves are emitted from this product or other Bluetooth devices, please do not use in the vicinity of a televi- sion or radio, as it might interfere with the transmission of sound or images. • To begin installation, please register using an account that has administrator privileges. • This product is applicable only for general usage within the office or at home. Please do not use this product with medical facilities and financial systems, computer systems, nuclear power facilities where there might be direct or indirect impact to life, or in an environment that requires a high level of security and reliability, or an environment that directly impacts military defense objectives. Our Company will not be liable for any losses incurred from any of these above actions. • Our Company will not be liable for any losses incurred by external factors, such as product malfunction, connectivity failure, bad communication, power outage, or interference by a third party resulting in lost communication opportunities. • Our Company will not be liable for any losses incurred due to interception of communications, leaked information, tamper- ing or destruction by a third party. Attention Items During Use comprising of internal batteries and transformer. Therefore, please handle with care, and avoid spilling beverages or liquid into the interior of the keyboard. • Please do not dismantle or modify. Please do not tear off or modify the original factory maintenance label to…

Text truncated - open the document above for the full version.

Reference No. BDBO-WTW-P22010549_ExtPho Page 1/7 CONSTRUCTION PHOTOS OF EUT FILCKFBT3-33 Reference No. BDBO-WTW-P22010549_ExtPho Page 2/7 Reference No. BDBO-WTW-P22010549_ExtPho Page 3/7 Reference No. BDBO-WTW-P22010549_ExtPho Page 4/7 FILCKTLBT3-33 Reference No. BDBO-WTW-P22010549_ExtPho Page 5/7 Reference No. BDBO-WTW-P22010549_ExtPho Page 6/7 Reference No. BDBO-WTW-P22010549_ExtPho Page 7/7

ABCD123 45678 1 ON 2 3 4 5 6 7 R- 41202681 IS 13252 ( PART 1 ) :2010

Reference No. BDBO-WTW-P22010549_IntPho Page 1/14 CONSTRUCTION PHOTOS OF EUT FILCKFBT3-33 Reference No. BDBO-WTW-P22010549_IntPho Page 2/14 Reference No. BDBO-WTW-P22010549_IntPho Page 3/14 Reference No. BDBO-WTW-P22010549_IntPho Page 4/14 Reference No. BDBO-WTW-P22010549_IntPho Page 5/14 Reference No. BDBO-WTW-P22010549_IntPho Page 6/14 Antenna Reference No. BDBO-WTW-P22010549_IntPho Page 7/14 Reference No. BDBO-WTW-P22010549_IntPho Page 8/14 FILCKTLBT3-33 Reference No. BDBO-WTW-P22010549_IntPho Page 9/14 Reference No. BDBO-WTW-P22010549_IntPho Page 10/14 Reference No. BDBO-WTW-P22010549_IntPho Page 11/14 Reference No. BDBO-WTW-P22010549_IntPho Page 12/14 Reference No. BDBO-WTW-P22010549_IntPho Page 13/14 Antenna Reference No. BDBO-WTW-P22010549_IntPho Page 14/14

Report No.: MFBDBO-WTW-P22010549 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: MFBDBO-WTW-P22010549 FCC ID: XS8-CONV3 Model No.: FILCKFBT3-33 Series Model: FILCKTLBT3-33 Received Date: 2022/1/15 Test Date: 2022/5/16 ~ 2022/5/19 Issued Date: 2022/7/8 Applicant: Diatec Corporation Address: 4F Kairaku BLDG(SOTO-KANDA) 6-5-4, Soto-Kanda, Chiyoda-Ku, Tokyo, 101-0021, Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBDBO-WTW-P22010549 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 3 SAR Test Exclusion Thresholds .......................................................................................................... 6 4 Conclusion ............................................................................................................................................ 6 Report No.: MFBDBO-WTW-P22010549 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued MFBDBO-WTW-P22010549 Original release. 2022/7/8 Report No.: MFBDBO-WTW-P22010549 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Majestouch Convertible 3 Brand: FILCO Model No.: FILCKFBT3-33 Series Model: FILCKTLBT3-33 Sample Status: Engineering sample Applicant: Diatec Corporation Test Date: 2022/5/16 ~ 2022/5/19 Standards: FCC Part 2 (Section 2.1093) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: 2022/7/8 Jessica Cheng / Senior Specialist Approved by : , Date: 2022/7/8 Jeremy Lin / Project Engineer Report No.: MFBDBO-WTW-P22010549 Page No. 5 / 6 Report Format Version: 6.1.1 2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  .  .  The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is requi…

Text truncated - open the document above for the full version.

Report No.: RFBDBO-WTW-P22010549 Page No. 1 / 61 Report Format Version: 7.1.0 Reference No.: BDBO-WTW-P22010549 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBDBO-WTW-P22010549 FCC ID: XS8-CONV3 Model No.: FILCKFBT3-33 Series Model: FILCKTLBT3-33 Received Date: 2022/1/15 Test Date: 2022/5/16 ~ 2022/5/19 Issued Date: 2022/7/8 Applicant: Diatec Corporation Address: 4F Kairaku BLDG(SOTO-KANDA) 6-5-4, Soto-Kanda, Chiyoda-Ku, Tokyo, 101-0021, Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 Approved by: , Date: 2022/7/8 Jeremy Lin / Project Engineer This test report consists of 61 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Jessica Cheng / Senior Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBDBO-WTW-P22010549 Page No. 2 / 61 Report Format Version: 7.1.0 Reference No.: BDBO-WTW-P22010549 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description .................................................................................................................................................. 7 3.2 Antenna Description of EUT ..................................................................................................................................... 8 3.3 Channel List .............................................................................................................................................................. 9 3.4 Test Mode Applicability and Tested Channel Detail ................................................................................................ 10 3.5 Duty Cycle of Test Signal........................................................................................................................................ 11 3.6 Test Program Used and Operation Descriptions .................................................................................................... 12 3.7 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 12 3.8 Configuration of Peripheral Devices and Cable Connections ................................................................................ 14 4 Test Instruments ...................................................................................................................................................... 15 4.1 RF Output Power .................................................................................................................................................... 15 4.2 Number of Hopping Frequency Used ..................................................................................................................... 15 4.3 Dwell Time on Each Channel ...............................................................................…

Text truncated - open the document above for the full version.

Reference No.:RFBDBO-WTW-P22010549-TSup Page 1/8 PHOTOGRAPHS OF THE TEST CONFIGURATION AC Power Conducted Emissions Mode C Reference No.:RFBDBO-WTW-P22010549-TSup Page 2/8 Mode D Reference No.:RFBDBO-WTW-P22010549-TSup Page 3/8 Unwanted Emissions below 1 GHz Mode A Reference No.:RFBDBO-WTW-P22010549-TSup Page 4/8 Mode B Reference No.:RFBDBO-WTW-P22010549-TSup Page 5/8 Mode C Reference No.:RFBDBO-WTW-P22010549-TSup Page 6/8 Mode D Reference No.:RFBDBO-WTW-P22010549-TSup Page 7/8 Unwanted Emissions above 1 GHz Mode A Reference No.:RFBDBO-WTW-P22010549-TSup Page 8/8 Mode B