XT5-BRQT40braille notetaker and book reader

Mantis Q40 Getting Started Overview Front view Left side view Rear view Getting Started Thank you for purchasing the Mantis Q40. This getting started guide provides instructions for charging the device, orientation, powering on and off, navigating menus, panning text, using the Context Menu, and accessing the User Guide. For more information on how to use your Mantis, please refer to the digital user guide integrated in your Mantis. In the Box Check that the listed items have been included. Contact Customer Service at 1-800-223-1839 or [email protected] with any problems. • Mantis Q40 braille display • USB-C to USB-A cable • USB to AC adapter • Green thermoplastic polyurethane (TPU) bumper case • Braille Getting Started Guide • Print Getting Started Guide Orientation and Description With the device on a flat surface in front of you, the proper operational orientation is with the braille cells closest to you. The top surface includes the braille display and the QWERTY keyboard. Beginning with the braille cells (closest to you) and moving away from you are the small round Cursor Routing buttons, located just above the braille cells. You use the routing buttons to move the braille cursor when reading and editing, and to activate items in a menu. Continuing away from you, on a small rise in the surface is the QWERTY computer keyboard. The layout of the keys for the QWERTY keyboard is similar to many laptop keyboards. Along the front edge of the device closest to you are five controls. The two outermost rectangular buttons are the Previous and Next thumb keys. When editing, they act much the same as the Up and Down Arrow keys on the keyboard. You also use them to move between items in a menu. Moving inward along the front edge, are two more rectangular buttons called the Panning keys. These allow you to move to the previous and next 40-cell section of the text you are reading. In the center of the front edge is the small, round Home key. Use this key to return to the Main Menu at any time, as well as to exit the braille terminal when in Terminal mode. On the left edge of the device, from front to back, is the USB-A port, used to connect a USB drive or other external USB storage device to the Mantis. Next is the Power button, which has a small dot on it for easy recognition. Next is a small LED display, which shows the status of your device. The last port is the USB-C connector, used to connect the Mantis to a host device or the AC adapter. On the back edge of the device and to the far left is an SD Card slot. Use an SD card for storing documents and for updating the software and firmware on the device. Charging the Device NOTE: Make sure to charge your Mantis completely prior to use. Connect the USB-C end of the USB cable to the USB-C port located on the left edge of your Mantis. Very little effort is required, and forcing the connection can damage the cable or the device. Connect the other end of the USB cable to the power adapter. Then plug the power adapter into a power outlet. The USB connector and power adapter are included with your Mantis. Use the provided power adapter for optimal recharge. Powering On and Off If your device is charged, press and hold the Power button on the left edge of the device for approximately 2 seconds to turn on your Mantis. “Starting” should appear on the braille display with a tactile loading animation that circles during start-up. After a few seconds, loading is complete. The “Notetaker” application is shown as selected on the braille display. Your Mantis is now ready for use. To turn the device off, press and hold the Power button for 2 seconds. Navigating Menus To navigate from item to item in menus, press the Previous (leftmost) and Next (rightmost) thumb keys, located on the front edge of your device. You may also use the Up and Down Arrow keys on the QWERTY keyboard. As you press the Previous and Next thumb keys, the menu items change on the braille display. Each item represents an application or option you can activate. To activate a menu item, press one of the Cursor Routing keys. You can also press the Enter key on the keyboard to activate a menu item. Panning Text Often, sentences may exceed the 40 characters allowed by your Mantis. To continue reading through the end of a sentence or backward towards the start of a sentence, use the Left and Right thumb keys to pan the text located on the front edge of your device immediately to the left and right of the Home button. Using the Context Menu The Context Menu is accessible from almost everywhere in your device. It offers useful contextual functions that are relevant to what you are currently doing on your Mantis. For example, if you are looking for a specific action or shortcut, chances are you can find it in the Context Menu. To activate the Context Menu, hold Ctrl then press M. The Ctrl key is located in the front left corner of your QWERTY keyboard. A menu opens with a list of actions you can perform at that particular moment. Scroll through this menu until you find what you are looking for, and then press Enter or any Cursor Routing button. Accessing the Built-in User Guide To access the build-in user guide, activate the Library item from the Main Menu, then select User Guide. There you find the complete user guide along with a command reference. This is where to find the most up-to-date information, as well as other resources to help you make the most of your Mantis Q40. Alternatively, you can download the user guide from www.aph.org/product/mantis-q40/. Specifications Power requirement: [email protected] Battery: Li-Ion 3.7V nominal, 2000 mAh Operating temperature range: +5 ~ +45 degrees Celsius Battery charging temperature range: +5 ~ +35 degrees Celsius Storage temperature: -20 ~ +65 degrees Celsius Operating humidity: 5% ~ 95% (non-condensing) Storage humidity: 5% ~ 95% (non-condensing) Warnings Battery Safety Precautions: CAUTION: - Risk of explosion if battery is replaced by an incorrect type. - Dispose…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation External photos.docx; Date: May 2013 External photos 390290‐1RADWL Date of issue: April 27, 2020 Applicant: Technologies Humanware Inc Product: Brail reader with BLE and Wi‐Fi module Model: BRQT40 FCC ID: IC Registration number: XT5‐BRQT40 8670A‐BRQT40 Section 1: External photos Report reference ID: ‐1RADWL Page φ of ψ Section λ. External photos λ.λ Top front view Section 1: External photos Report reference ID: ‐1RADWL Page χ of ψ λ.μ Top rear view Section 1: External photos Report reference ID: ‐1RADWL Page ψ of ψ λ.ν Bottom view λ.ξ Side view λ.ο Top view λ.π Side view

FCC ID : XT5-BRQT40 IC : 8670A-BRQT40 _____________________________________________________________________________________ Label Location

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation Internal photos.docx; Date: May 2013 Internal photos 390290‐1RADWL Date of issue: April 27, 2020 Applicant: Technologies Humanware Inc Product: Brail reader with BLE and Wi‐Fi module Model: BRQT40 FCC ID: IC Registration number: XT5‐BRQT40 8670A‐BRQT40 Section 1: Internal photos Report reference ID: ‐390290‐1RADWL Page φ of ϋ Section λ. Internal photos λ.λ Top general view Section 1: Internal photos Report reference ID: ‐390290‐1RADWL Page χ of ϋ λ.μ μ.ξ GHz module shielded view Section 1: Internal photos Report reference ID: ‐390290‐1RADWL Page ψ of ϋ λ.ν RF modules view with removed shieldings Section 1: Internal photos Report reference ID: ‐390290‐1RADWL Page ω of ϋ λ.ξ PCB bottom view Section 1: Internal photos Report reference ID: ‐390290‐1RADWL Page ϊ of ϋ Section 1: Internal photos Report reference ID: ‐390290‐1RADWL Page ϋ of ϋ

Humanware QT40 Tune up Value for SAR RateMod.Power limit (dBm) Frequency (MHz) ChannelBDRERDBLE 1 MBpsb18.50 240206.009.006.00 2 MBpsb18.50 2440396.009.006.00 5.5 Mbpsb18.50 2480986.009.006.00 11 Mbpsb18.50 6 Mbpsg23.50Note: EDR3 not available 9 Mbpsg23.50 12 Mbpsg23.50 18Mbpsg20.83 24 MbpSg20.83 36 Mbpsg18.17 48 Mbpsg18.17 54 Mbpsg15.50 6.5Mbpsn (20Mhz)23.50 13 Mbpsn (20Mhz)21.25 19.5 Mbpsn (20Mhz)21.25 26Mbpsn (20Mhz)19.00 39 MbpSn (20Mhz)19.00 52 Mbpsn (20Mhz)16.75 58.5 Mbpsn (20Mhz)16.75 65 Mbpsn (20Mhz)14.50 13.5 Mbpsn (40Mhz)21.50 27 Mbpsn (40Mhz)19.75 40,5 Mbpsn (40Mhz)19.75 54 Mbpsn (40Mhz)18.00 81 MbpSn (40Mhz)18.00 108 Mbpsn (40Mhz)16.25 121.5 Mbpsn (40Mhz)16.25 135 Mbpsn (40Mhz)14.50 WIFI settings Maximum RMS output power Bluetooth average output power (dBm)

© 2020 RF Exposure Lab, LLC This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. 802 N. Twin Oaks Valley Road, Suite 105 • San Marcos, CA 92069 • U.S.A. TEL (760) 471-2100 • FAX (760) 471-2121 http://www.rfexposurelab.com CERTIFICATE OF COMPLIANCE SAR EVALUATION Technologies Humanware Inc. Dates of Test: April 1-2, 2020 1800 Michaud Street Test Report Number: SAR.20200402 Drummondville, QC J2C 7G7 Canada This wireless mobile and/or portable device has been shown to be compliant for localized specific absorption rate (SAR) for uncontrolled environment/general exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in IEEE 1528-2013, EN/IEC 62209:2010 and IEC 62209-2 Amd 2 (See test report). I attest to the accuracy of the data. All measurements were performed by myself or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. RF Exposure Lab, LLC certifies that no party to this application is subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Jay M. Moulton Vice President Testing Cert. # 2387.01 FCC ID: XT5-QT40 IC Certificate: 8670A-QT40 Model(s): QT40 Test Sample: Engineering Unit Same as Production Serial Number: Eng 1 Equipment Type: Wireless Braille Keyboard Classification: Portable Transmitter Next to Body TX Frequency Range: 2412-2462 MHz; 2402-2480 MHz Frequency Tolerance: ± 2.5 ppm Maximum RF Output: 2450 MHz (b) – 18.5 dBm, 2450 MHz (g) – 23.5 dBm , 2450 MHz (n20) – 23.5 dBm , 2450 MHz (n40) – 21.5 dBm , 2450 MHz (BT) – 9.0 dBm Conducted Signal Modulation: DSSS, OFDM, GFSK Antenna: Internal Chip for WiFi/BT Battery: Internal Application Type: Certification FCC Rule Parts: Part 2, 15C KDB Test Methodology: KDB 447498 D01 v06, KDB 248227 D01 v02r02, KDB 865664 D01 v01r04, KDB 865664 D02 v01r01 Industry Canada: RSS-102 Issue 5, Safety Code 6 Maximum SAR Value: 1.18 W/kg Reported Separation Distance: 0 mm Report Number: SAR.20200402 © 2020 RF Exposure Lab, LLC Page 2 of 61 This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. Table of Contents 1. Introduction ........................................................................................................................ 4 SAR Definition [5] ................................................................................................................... 5 2. SAR Measurement Setup ................................................................................................... 6 Robotic System ...................................................................................................................... 6 System Hardware ................................................................................................................... 6 System Electronics ................................................................................................................. 7 Probe Measurement System .................................................................................................. 7 3. Probe and Dipole Calibration .............................................................................................15 4. Phantom & Simulating Tissue Specifications .....................................................................16 Head & Body Simulating Mixture Characterization ................................................................16 5. ANSI/IEEE C95.1 – 1992 RF Exposure Limits [2] ..............................................................17 Uncontrolled Environment .....................................................................................................17 Controlled Environment .........................................................................................................17 6. Measurement Uncertainty .................................................................................................18 7. System Validation..............................................................................................................19 Tissue Verification .................................................................................................................19 Test System Verification ........................................................................................................19 8. SAR Test Data Summary ..................................................................................................20 Procedures Used To Establish Test Signal ...........................................................................20 Device Test Condition ...........................................................................................................20 SAR Data Summary – 2450 MHz Body 802.11bg & BT ........................................................24 9. Test Equipment List ...........................................................................................................25 10. Conclusion ....................................................................................................................26 11. References ....................................................................................................................27 Appendix A – System Validation Plots and Data .......................................................................28 Appendix B – SAR Test Data Plots ...........................................................................................31 Appendix C – SAR Test Setup Photos ......................................................................................33 A ppendix D – Probe Calibration Data Sheets ............................................................................39 Appe…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC 15.247 and RSS-247.docx; Date: Apr 2019 MRA il ac SCC Accredited LAB LAB Accrédité CCN TM Choose Scandinavian trust Wireless test report – 390290-2TRFWL Applicant: Technologies Humanware Inc Product type: Brail reader with BLE and Wi-Fi module Model: BRQT40 FCC ID: ISED Registration number: XT5-BRQT40 8670A-BRQT40 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.247 Operation in the 902–928 MHz, 2400–2483.5 MHz, and 5725–5850 MHz  RSS-247, Issue 2, Feb 2017, Section 5 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices 5) Standard specifications for frequency hopping systems and digital transmission systems operating in the bands 902–928 MHz, 2400–2483.5 MHz and 5725–5850 MHz Date of issue: May 7, 2020 Redwanul Rasel, EMC Specialist Tested by Signature Yong Huang, Wireless/EMC Specialist Tested by Signature Andrey Adelberg, Senior Wireless/EMC Specialist Reviewed by Signature Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 2 of 70 Test location(s) Company name Nemko Canada Site name Montreal Address 292 Labrosse Avenue City Pointe-Claire Province Quebec Postal code H9R 5L8 Country Canada Telephone +1 514 694 2684 Facsimile +1 514 694 3528 Website www.nemko.com Site number (3 m SAC) FCC: CA2041; IC: 2040G-5 Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 3 of 70 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Test methods ............................................................................................................................................................................................................ 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Exclusions ................................................................................................................................................................................................................. 4 1.6 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart C, general requirements test results ........................................................................................................................................ 5 2.2 FCC Part 15 Subpart C, intentional radiators test results for digital transmission systems (DTS) ............................................................................. 5 2.3 ISED RSS-Gen, Issue 5, test results............................................................................................................................................................................ 6 2.4 ISED RSS-247, Issue 2, test results for digital transmission systems (DTS) ................................................................................................................ 6 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 7 3.1 Sample information .................................................................................................................................................................................................. 7 3.2 EUT information ....................................................................................................................................................................................................... 7 3.3 Technical information ................................…

Text truncated - open the document above for the full version.

Section 8 Testing data Test name FCC 15.247(b) and RSS-247 5.4(d) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-247, Issue 2 Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 36 of 70 8.6.3 Test data, Continued Figure 8.6-1: Output power on low channel Figure 8.6-2: Output power on mid channel Figure 8.6-3: Output power on high channel Section 8 Testing data Test name FCC 15.247(b) and RSS-247 5.4(b) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-247, Issue 2 Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 37 of 70 8.6.4 Test data, OFDM Modulation Table 8.6-2: Output power measurements results Frequency, MHz Conducted output power, dBm Margin, dB Antenna gain, dBi EIRP, dBm EIRP limit, dBm EIRP margin, dB Measured Limit 2412 23.13 30 6.87 3.5 26.63 36 9.37 2437 23.13 30 6.87 3.5 26.63 36 9.37 2462 23.28 30 6.72 3.5 26.78 36 9.22 Section 8 Testing data Test name FCC 15.247(b) and RSS-247 5.4(b) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-247, Issue 2 Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 38 of 70 8.6.5 Test data, Continued Figure 8.6-4: Output power on low channel Figure 8.6-5: Output power on mid channel Figure 8.6-6: Output power on high channel Section 8 Testing data Test name FCC 15.247(b) and RSS-247 5.4(b) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-247, Issue 2 Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 39 of 70 8.6.6 Test data, OFDM Modulation (802.11n.HT20) Table 8.6-3: Output power measurements results Frequency, MHz Conducted output power, dBm Margin, dB Antenna gain, dBi EIRP, dBm EIRP limit, dBm EIRP margin, dB Measured Limit 2412 23.31 30 6.69 3.5 26.81 36 9.19 2437 23.28 30 6.72 3.5 26.78 36 9.22 2462 23.43 30 6.57 3.5 26.93 36 9.07 Section 8 Testing data Test name FCC 15.247(b) and RSS-247 5.4(b) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-247, Issue 2 Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 40 of 70 8.6.7 Test data, Continued Figure 8.6-7: Output power on low channel Figure 8.6-8: Output power on mid channel Figure 8.6-9: Output power on high channel Section 8 Testing data Test name FCC 15.247(b) and RSS-247 5.4(b) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-247, Issue 2 Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 41 of 70 8.6.8 Test data, OFDM Modulation (802.11n.HT40) Table 8.6-4: Output power measurements results Frequency, MHz Conducted output power, dBm Margin, dB Antenna gain, dBi EIRP, dBm EIRP limit, dBm EIRP margin, dB Measured Limit 2422 21.10 30 8.90 3.5 24.60 36 11.40 2437 20.91 30 9.09 3.5 24.41 36 11.59 2452 21.09 30 8.91 3.5 24.59 36 11.41 Section 8 Testing data Test name FCC 15.247(b) and RSS-247 5.4(b) Transmitter output power and e.i.r.p. requirements Specification FCC Part 15 Subpart C and RSS-247, Issue 2 Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 42 of 70 8.6.8 Test data, Continued Figure 8.6-10: Output power on low channel Figure 8.6-11: Output power on mid channel Figure 8.6-12: Output power on high channel Section 8 Testing data Test name FCC 15.247(d) and RSS-247 5.5 Spurious (out-of-band) unwanted emissions Specification FCC Part 15 Subpart C and RSS-247, Issue 2 Report reference ID: 390290-1TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 43 of 70 8.7 FCC 15.247(d) and RSS-247 5.5 Spurious (out-of-band) unwanted emissions (Wifi) 8.7.1 Definitions and limits FCC: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)). ISED: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated device is operating, the RF power that is produced shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided that the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of root-mean-square averaging over a time interval, as permitted under section 5.4(d), the attenuation required shall be 30 dB instead of 20 dB. Attenuation below the general field strength limits specified in RSS-Gen is not required. Table 8.7-1: FCC §15.209 and RSS-Gen – Radiated emission limits Frequency, MHz Field strength of emissions Measurement distance, μV/m dBμV/m m 0.009–0.490 2400/F 67.6 – 20 × log 10 (F) 300 0.490–1.705 24000/F 87.6 – 20 × log 10 (F) 30 1.705–30.0 30 29.5 30 30–88 100 40.0 3 88–216 150 43.5 3 216–960 200 46.0 3 above 960 500 54.0 …

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC 15.247 and RSS-247.docx; Date: Apr 2019 MRA il ac SCC Accredited LAB LAB Accrédité CCN TM Choose Scandinavian trust Wireless test report – 390290-3TRFWL Applicant: Technologies Humanware Inc Product type: Brail reader with BLE and Wi-Fi module Model: BRQT40 FCC ID: ISED Registration number: XT5-BRQT40 8670A-BRQT40 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.247 Operation in the 902–928 MHz, 2400–2483.5 MHz, and 5725–5850 MHz  RSS-247, Issue 2, Feb 2017, Section 5 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices 5) Standard specifications for frequency hopping systems and digital transmission systems operating in the bands 902–928 MHz, 2400–2483.5 MHz and 5725–5850 MHz Date of issue: July 7, 2020 Redwanul Rasel, EMC Specialist Tested by Signature Yong Huang, Wireless/EMC Specialist Tested by Signature Andrey Adelberg, Senior Wireless/EMC Specialist Reviewed by Signature Report reference ID: 390290-3TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 2 of 88 Test location(s) Company name Nemko Canada Site name Montreal Address 292 Labrosse Avenue City Pointe-Claire Province Quebec Postal code H9R 5L8 Country Canada Telephone +1 514 694 2684 Facsimile +1 514 694 3528 Website www.nemko.com Site number (3 m SAC) FCC: CA2041; IC: 2040G-5 Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 390290-3TRFWL Applicant: Technologies Humanware Inc Model: BRQT40 Page 3 of 88 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications ......................................................................…

Text truncated - open the document above for the full version.