XYN761BRemote Control with BT 4.0 Low Energy

ruwido austria gmbh . Köstendorfer Str. 8 . Austria . t +43 6216 4571-0 . www.ruwido.com Page 1 of 3 This document is intellectual property of ruwido austria gmbh and contains confidential information. Reproduction, modification,. communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido austria. © 2015. please note: this document must not be shared with third parties without prior written consent from ruwido product types: 2761-515, 2761-525, 2761-526, 2761-531 ble remote control guide 2761-515 RCU user guide-2015-11-20.docx page 2 of 3 copyright 2015 ruwido austria gmbh – this document is the intellectual property of ruwido austria gmbh and contains confidential information. reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido. 1 LED behaviour during regular operation  LED behaviour: green LED when BLE command is transmitted (as long as button is pressed)  red LED when IR command is transmitted (as long as button is pressed) 2 manual pairing  power on STB / plug in USB dongle (in case usb dongle is used)  press "On Demand" and "Play/Pause" keys for 3 sec to start pairing process (continues red flashing)  LED will stop flashing red if pairing was successful  to delete pairing from remote control press 4 and 6 keys for 3 seconds to delete pairing  LED will flash 4 times red if paring deletion was successful 3 factory settings  to set remote control back to factory mode press 7 and 9 keys for 3 seconds  LED will flash 4 times 4 notes  factory default settings: BLE mode (with rstep) and voice enabled  pairing information will remain if batteries are being removed / changed  mode settings will remain if batteries are being removed / changed 2761-515 RCU user guide-2015-11-20.docx page 3 of 3 copyright 2015 ruwido austria gmbh – this document is the intellectual property of ruwido austria gmbh and contains confidential information. reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido. DECLARATION User Information FCC 15.2: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Part 15 Statement. FCC 15.19/RSS Gen Issue 3 Sect. 7.1.3 This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Statement Class B Digital Device FCC 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/ TV technician for help.

CSA Group Bayern GmbH File No. T40428-00-xxGK, page 1 of 4 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 Attachment B Type / Model Name : Type 2761B Product Description : Remote control with Bluetooth 4.0 Low Energy Applicant : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Manufacturer : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Licence holder : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA according to Test Report No. : T40428-00-xxGK 18. December 2015 ______________________________________________________________________________________________ Date of issue The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. CSA Group Bayern GmbH File No. T40428-00-xxGK, page 2 of 4 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 Contents 1 P h o t o d o c u m e n t a t i o n o f t h e E U T 3 1.1 External views: 3 1.2 Internal views: 4 1.3 RF Section: 4 1.4 Antenna structure: 4 CSA Group Bayern GmbH File No. T40428-00-xxGK, page 3 of 4 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 1 P h o t o d o c u m e n t a t i o n o f t h e E U T 1.1 External views:

CSA Group Bayern GmbH File No. T40428-00-xxGK, page 1 of 4 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 Attachment B Type / Model Name : Type 2761B Product Description : Remote control with Bluetooth 4.0 Low Energy Applicant : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Manufacturer : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Licence holder : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA according to Test Report No. : T40428-00-xxGK 18. December 2015 ______________________________________________________________________________________________ Date of issue The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. CSA Group Bayern GmbH File No. T40428-00-xxGK, page 2 of 4 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 Contents 1 P h o t o d o c u m e n t a t i o n o f t h e E U T 3 1.1 External views: 3 1.2 Internal views: 4 1.3 RF Section: 4 1.4 Antenna structure: 4 CSA Group Bayern GmbH File No. T40428-00-xxGK, page 4 of 4 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 1.2 Internal views: 1.3 RF Section: 1.4 Antenna structure: PCB antenna

CSA Group Bayern GmbH File No. T40428-00-03GK, page 1 of 15 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 EMI − T E S T R E P O R T - Human Exposure - Type / Model Name : Type 2761B Product Description : Remote control with Bluetooth 4.0 Low Energy Applicant : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Manufacturer : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Licence holder : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Test Result according to the standards listed in clause 1 test standards: POSITIVE Test Report No. : T40428-00-03GK 18. December 2015 ______________________________________________________________________________________________ Date of issue The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-03GK, page 2 of 15 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 Contents 1 T E S T S T A N D A R D S 3 2 E Q U I P M E N T U N D E R T E S T 4 2.1 Photo documentation of the EUT – Detailed photos see Attachment B 4 2.2 Equipment category 4 2.3 Short description of the equipment under test (EUT) 4 2.4 Operation frequency and channel plan 4 2.5 Variants of the EUT 5 2.6 Transmit operating modes 5 2.7 Antenna 5 2.8 Power supply system utilised 5 2.9 Peripheral devices and interface cables 5 2.10 Determination of worst case conditions for final measurement 5 3 T E S T R E S U L T S U M M E R Y 6 3.1 Final assessment 6 4 T E S T E N V I R O N M E N T 7 4.1 Address of the test laboratory 7 4.2 Environmental conditions 7 4.3 Statement of the measurement uncertainty 7 4.4 Measurement protocol for FCC and IC 8 5 T E S T C O N D I T I O N S A N D R E S U L T S 9 5.1 Maximum peak output power 9 6 H U M A N E X P O S U R E 11 6.1 Maximum permissible exposure (MPE) 11 6.2 SAR test exclusion considerations 13 6.3 SAR test exemption considerations 14 6.4 Co-location and Co-transmission 15 ATTACHMENT B as separte supplement FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-03GK, page 3 of 15 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 1, Subpart I - Procedures Implementing the National Environmental Policy Act of 1969 Part 1, Subpart I, Section 1.1310 Radiofrequency radiation exposure limits Part 1, Subpart 2, Section 2.1093 Radiofrequency radiation exposure evaluation: portable device OET Bulletin 65, 65A, 65B Edition 97-01, August 1997 – Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. KDB 447498 D01 v05r02 Mobile and portable devices RF Exposure procedures and equipment authorisation policies, February 7, 2014. KDB 865664 D01 SAR Measurement Requirements for 100 MHz to 6 GHz, February 7, 2014. ANSI C95.1: 2005 IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz ETSI TR 100 028 V1.3.1: 2001-03, Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Uncertainties in the Measurement of Mobile Radio Equipment Characteristics—Part 1 and Part 2 RSS-102, Issue 5, March 2015 Radio Frequency (RF) Exposure Compliance of Radio- communication Apparatus (All Frequency Bands) FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-03GK, page 4 of 15 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 2 E Q U I P M E N T U N D E R T E S T 2.1 Photo documentation of the EUT – Detailed photos see Attachment B 2.2 Equipment category Bluetooth Low Energy device, portable equipment. 2.3 Short description of the equipment under test (EUT) The EUT is a Bluetooth Low Energy wireless remote control system. The EUT is compatible with the standard 802.15.1. It supports the 2.4 GHz frequency band. A single PCB antenna is used within the system. The modulation used by the EUT is GFSK with a data rate of 1 Mbits which means worst case for testing. The EUT has only one integrated antenna, no temporary connector and no external antenna can be connected. The EUT is powered by two 1.5 V alkaline batteries. Number of tested samples : 1 (emission test) 1 (CPC measurement) Serial number : Pre-production sample Pre-production sample Firmware version : V 0.15.55 V 0.15.55 Items Description BT type 4.0 Low Energy BT chipset type Texas Instruments CC2541 Modulation GFSK Frequency range 2400 MHz to 2483.5 MHz Channel numbers 40 Data rate (kbps) 1000 Antenna type PCB EUT configuration: (The CDF filled by the applicant can be viewed at the test laboratory.) 2.4 Operation frequency and channel plan The operating frequency is 2400 MHz to 2483.5 MHz. Channel plan: Note: the marked frequencies are determined for final testing. ChannelFrequencyChannelFrequencyChannelFrequencyChannelFrequency 37240292422182442282462 02404102424192444292464 12406382426202446302466 22408112428212448312468 32410122430222450322470 42412132432232452332472 52414142434242454342474 62416152436252456352476 72418162438262458362478 82420172440272460392480 FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-03GK, page 5 of 15 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 2.5 Variants of the EUT None 2.6 Transmit operating modes The EUT uses GFSK and provide following data rate: 1000 kbps (kbps = kilobits per second) 2.7 Antenna The following antennas shall be used with the EUT: 2.8 Power supply system utilised Power suppl…

Text truncated - open the document above for the full version.

CSA Group Bayern GmbH File No. T40428-00-02GK, page 1 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 EMI − T E S T R E P O R T - FCC Part 15.249, RSS210 - Type / Model Name : Type 2761B Product Description : Remote control with Bluetooth 4.0 Low Energy Applicant : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Manufacturer : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Licence holder : ruwido austria gmbh Address : Köstendorfer Strasse 8 5202 NEUMARKT, AUSTRIA Test Result according to the standards listed in clause 1 test standards: POSITIVE Test Report No. : T40428-00-02GK 18. December 2015 ______________________________________________________________________________________________ Date of issue The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-02GK, page 2 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 Contents 1 T E S T S T A N D A R D S 3 2 E Q U I P M E N T U N D E R T E S T 4 2.1 Photo documentation of the EUT 4 2.2 Equipment category 4 2.3 Short description of the equipment under test (EUT) 4 2.4 Variants of the EUT 4 2.5 Operation frequency and channel plan 5 2.6 Transmit operating modes 5 2.7 Antenna 5 2.8 Power supply system utilised 6 2.9 Peripheral devices and interface cables 6 2.10 Determination of worst case conditions for final measurement 6 3 T E S T R E S U L T S U M M E R Y 7 3.1 Final assessment 7 4 T E S T E N V I R O N M E N T 8 4.1 Address of the test laboratory 8 4.2 Environmental conditions 8 4.3 Statement of the measurement uncertainty 8 4.4 Measurement protocol for FCC and IC 9 5 T E S T C O N D I T I O N S A N D R E S U L T S 10 5.1 AC power line conducted emissions 10 5.2 Field strength of fundamental 11 5.3 Out-of-band emission, radiated 13 5.4 EBW and OBW 20 5.5 Correction for pulse operation (duty cycle) 23 5.6 Antenna application 24 6 U S E D T E S T E Q U I P M E N T A N D A C C E S S O R I E S 25 Attachment B as separate supplement FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-02GK, page 3 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15, Subpart A - General (September, 2015) Part 15, Subpart A, Section 15.31 Measurement standards Part 15, Subpart A, Section 15.33 Frequency range of radiated measurements Part 15, Subpart A, Section 15.35 Measurement detector functions and bandwidths FCC Rules and Regulations Part 15, Subpart C - Intentional Radiators (September, 2015) Part 15, Subpart C, Section 15.203 Antenna requirement Part 15, Subpart C, Section 15.204 External radio frequency power amplifiers and antenna modifications Part 15, Subpart C, Section 15.205 Restricted bands of operation Part 15, Subpart C, Section 15.207 Conducted limits Part 15, Subpart C, Section 15.209 Radiated emission limits, general requirements Part 15, Subpart C, Section 15.249 Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz ANSI C63.4: 2014 Methods of Measurement of Radio-Noise Emissions from Low- Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. ANSI C63.10: 2013 Testing Unlicensed Wireless Devices ANSI C95.1:2005 IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz CISPR 16-4-2: 2013 Uncertainty in EMC measurement CISPR 22: 2008 Information technology equipment EN 55022: 2010 FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-02GK, page 4 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 2 E Q U I P M E N T U N D E R T E S T 2.1 Photo documentation of the EUT Detailed photos see Attachment B 2.2 Equipment category Bluetooth Low Energy device, portable equipment. 2.3 Short description of the equipment under test (EUT) The EUT is a Bluetooth Low Energy wireless remote control system. The EUT is compatible with the standard 802.15.1. It supports the 2.4 GHz frequency band. A single PCB antenna is used within the system. The modulation used by the EUT is GFSK with a data rate of 1 Mbits which means worst case for testing. The EUT has only one integrated antenna, no temporary connector and no external antenna can be connected. Number of tested samples : 1 (emission test) 1 (CPC measurement) Serial number : Pre-production sample Pre-production sample Firmware version : V 0.15.55 V 0.15.55 Items Description BT type 4.0 Low Energy BT chipset type Texas Instruments CC2541 Modulation GFSK Frequency range 2400 MHz to 2483.5 MHz Channel numbers 40 Data rate (kbps) 1000 Antenna type PCB EUT configuration: (The CDF filled by the applicant can be viewed at the test laboratory.) 2.4 Variants of the EUT None FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-02GK, page 5 of 25 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 2.5 Operation frequency and channel plan The operating frequency is 2400 MHz to 2483.5 MHz. Channel plan: Note: the marked frequencies are determined for final testing. 2.6 Transmit operating modes The EUT uses GFSK and provide following data rate: 1000 kbps (kbps = kilobits per second) 2.7 Antenna The following antenna shall be used with the EUT: Calculation of gain: Note: For test instruments and accessories used see section 6 Part CPC 3. ChannelFrequencyChannelFrequencyChannelFrequencyChannelFrequency 372402924…

Text truncated - open the document above for the full version.

FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-02GK, page 11 of 26 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 5.2 Field strength of fundamental For test instruments and accessories used see section 6 Part CPR 3. 5.2.1 Description of the test location Test location: Anechoic chamber 1 Test distance: 3 m 5.2.2 Photo documentation of the test set-up 5.2.1 Applicable standard According to FCC Part 15C, Section 15.249(a): The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the effective limits. 5.2.2 Description of Measurement The radiated emission of the fundamental wave from the EUT is measured using a spectrum analyser and appropriate linear polarized antennas. The set up of the EUT and the measurement procedure is in accordance to ANSI C63.10, Item 6.5. The EUT is measured in TX continuous mode modulated under normal conditions. Analyser settings: Peak measurement: RBW: 3 MHz VBW: 10 MHz Detector: Max peak FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-02GK, page 13 of 26 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 5.3 Out-of-band emission, radiated For test instruments and accessories used see section 6 Part SER1, SER 2, SER 3. 5.3.1 Description of the test location Test location: OATS 1 Test location: Anechoic chamber 1 Test distance: 3 m 5.3.2 Photo documentation of the test set-up Test setup 30 MHz – 1000 MHz: Test setup 1 GHz – 18 GHz: FCC ID: XYN761B IC: 8748A-761B CSA Group Bayern GmbH File No. T40428-00-02GK, page 21 of 26 Ohmstrasse 1-4  94342 STRASSKIRCHEN  GERMANY Tel.: +49(0)9424-94810  Fax: +49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 5.4 EBW and OBW For test instruments and accessories used see section 6 Part MB. 5.4.1 Description of the test location Test location: AREA4 5.4.2 Photo documentation of the test set-up 5.4.3 Applicable standard According to FCC Part 15, Section 15.215(c): Intentional radiators operating under the alternative provisions to the general emission limits, as contained in Section 15.217 through Section 15.257, must be designed to ensure that the 20 dB bandwidth of the emission is contained within the frequency band designated in the rule section under which the equipment is operated. 5.4.4 Description of Measurement The bandwidth is measured at an amplitude level reduced from the reference level by a specified ratio of -20 dB (99%). The x-dB-down (OBW) function of the analyser is used. The measurement is performed with normal modulation in TX continuous mode. Spectrum analyser settings: RBW: 30 kHz, VBW: 100 kHz, Span: 3 MHz, Trace mode: max. hold, Detector: max. peak;