Y7HZB5SKOsitrack RFID compact stations (ref ZB5SKR0...) is a range of short range devices with integrated antenna, operating with a carrier frequency of 13.56 MHz and designed for mounting through a 022 hole.

1 Dimensions / Dimensions 1/8 05 - 2021 Printed in NNZ53033 - 02 ZB5SKp01 © 2020 Schneider Electric. “All Rights Reserved.” Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. en fr www.se.com ZB5SKR01 RFID Reader Lecteur RFID ZB5SKR01 mm in. COM TAG 40 1.57 40 1.57 Assembly / montage Utilization precautions / Précautions d'utilisation e >20 mm e >0.787in. e1 = e2 u 310 mm / 12.2 in. Mounting on a metal structure Montage sur structure métallique Minimum distances between two Readers Distances minimales entre deux lecteurs Possible to use anti-rotating plate ZB5AZ902. Possibilité d’utiliser la plaquette anti-rotation ZB5AZ902. COM TAG e e e e e e e1 e2 L’installation, l’utilisation, la réparation et la maintenance des équipements électriques doivent être assurées par du personnel qualifié uniquement. Schneider Electric décline toute responsabilité quant aux conséquences de l’utilisation de ce matériel. WARNING / AVERTISSEMENT UNINTENDED EQUIPMENT OPERATION Failure to follow these instructions can result in death, serious injury, or equipment damage. p Do not use the unit as the only means of control for critical system functions such as motor start/stop power control. FONCTIONNEMENT INATTENDU DE L'EQUIPEMENT Le non-respect de ces instructions peut provoquer la mort, des blessures graves ou des dommages matériels. p N'utilisez pas cette unité comme seul moyen pour contrôler les foncttions système critiques, telles que le démarrage/l'arrêt du moteur ou le contrôle de l'alimentation. COM TAG COM TAG COM TAG COM TAG ZB5SKT01 - RESET KEY ZB5SKT01 - RESET KEY ZB5SKT01 ZB5SKT01 ZB5SKT01 ZB5SKT01 ZB5SKT01 ZB5SKT01 ZB5SKT01 ZB5SKT01 ZB5SKT01 ZB5SKT01 RECYCLABLE Ø39 Ø1.54 16,5 0.63 19 0.75 28 1.10 2000 78.74 COM TAG 1 2 3 1...6 0.04...0.24 Ø22,3 Ø0.88 +0,4 0 +0.016 0 ZB5SKT01 Configuration kit Kit de configuration ZB5SKT01 2/8 05 - 2021 NNZ53033 - 02 ZB5SKp01 www.se.com WARNING TO USERS IN THE UNITED STATES Federal Communication Commission Interference Statement This equipment complies with FCC's radiation exposure limits set forth for an uncontrolled environment under the following conditions: 1. This equipment should be installed and operated such that a minimum separation distance of 20 cm is maintained between the radiator (antenna) and user's/nearby person's body at all times. 2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: p Reorient or relocate the receiving antenna. p Increase the separation between the equipment and receiver. p Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. p Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. NO UNAUTHORIZED MODIFICATIONS CAUTION: This equipment may not be modified, altered, or changed in any way without signed written permission from SCHNEIDER ELECTRIC. Any changes or modifications to this equipment not expressly approved by SCHNEIDER ELECTRIC may cause harmful interference, will void the FCC authorization to operate this equipment and will void the SCHNEIDER ELECTRIC warranty. WARNING TO USERS IN THE CANADA / ATTENTION POUR LES UTILISATEURS AU CANADA This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference received, including interference that may cause undesired operation of the device. This equipment complies with RSS102's radiation exposure limits set forth for an uncontrolled environment under the following conditions : 1. This equipment should be installed and operated such that a minimum separation distance of 20 cm is maintained between the radiator (antenna) and user's/nearby person's body at all times. 2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. L'émetteur/récepteur exempt de license contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement Economique Canada applicables aux appareils radio exempts de license. L’exploitation est autorisée aux deux conditions suivantes : 1. Il ne doit pas produire de brouillage, et 2. L’appareil doit accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible d’en compromettre le fonctionnement. Cet équipement est conforme aux limites d'expositions de la CNR102 applicables pour un environnement non contrôlé aux conditions suivantes : 1. Cet équipement devra être installé et fonctionner de telle manière qu'une distance minimale de séparation de 20 cm soit maintenue entre la partie rayonnante (l'antenne) et l'utilisateur / le…

Text truncated - open the document above for the full version.

Schneider Electric Industries France L’Isle d’Espagnac BP 660 – Zone Industrielle 16340 L’ISLE D’ESPAGNAC FRANCE Attn: TIMCO Engineering Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 Authority to Act as Agent FCC ID: Y7HXGCS4L, Y7HXGCS4D and Y7HZB5SK. IC ID: 7002C-XGCS4L, 7002C-XGCS4D and 7002C-ZB5SK. On our behalf, I appoint M. Thomas LEDRESSEUR from Emitech Angers - site de Juigné, 21 rue de la Fuye PA de Lanserre, 49610 Juigné sur Loire FRANCE, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s and Industry Canada’s regulations, will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by TIMCO Engineering Inc., still resides with Schneider Electric Industries. This authorization is valid until further written notice from Schneider Electric Industries. 6 April 2021 By Jean-Pierre LAIDET – Products Certification Manager Signature

Schneider Electric Industries France L’Isle d’Espagnac BP 660 – ZI No.3 16340 L’ISLE D’ESPAGNAC FRANCE Attn: TIMCO Engineering Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 Confidentiality Request regarding application for certification of FCC ID: Y7HZB5SK. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Harmony_ZB5S_D22_w.output - Technical description v1.1.docx (§ 6) Schematics Harmony_ZB5S_D22_w.output - Technical description v1.1.docx (§ 9) Operational Description Harmony_ZB5S_D22_w.output - Technical description v1.1.docx (§ 7) Parts List Harmony_ZB5S_D22_w.output - Technical description v1.1.docx (§ 11) Tune-up Infos Harmony_ZB5S_D22_w.output - Technical description v1.1.docx (§ 8) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below until 12/31/2021: Exhibit Type File Name Internal Photos Harmony_ZB5S_D22_w.output - Technical description v1.1.docx (§ 5) Sincerely, 21 April 2021 By Jean-Pierre LAIDET – Products Certification Manager Signature

Harmony ZB5SKR01 (with output) technical description v1.1 8/27 4 – Nameplate Harmony RFID compact stations ZB5SKR01 nameplate is composed of a paper label, stuck on the side of the product (refer to the picture below). 4.1 – Position 4.2 – Description (Scale = 3) 4.3 – FCC ID and IC Version/Model type FCC ID IC ZB5SKR01 Y7HZB5SK 7002C-ZB5SK Product nameplate

Harmony ZB5SKR01 (with output) technical description v1.1 9/27 5 – Internal construction The electronic hardware of Harmony RFID compact stations ZB5SKR01 is composed of 2 boards : 1 - the main board, which integrates the power supply, the micro-controller and all active components for RFID communication, 2 - the antenna board, which is dedicated to RFID transmission and integrates a printed coil (antenna) and passive components for tuning of the antenna. Harmony ZB5SKR01 shares the same internal structure as Ositrack XGCS491B201. Both products only differ from their connection mode : - XGCS491B201 uses 3 wires integrated cable, - XGCS491B201 uses a M12 (male) 5 pins connector. Harmony ZB5SKR01 shares also the same circuit boards as Ositrack XGCS491B201 : - same main board, but with a slightly different applicative software (without impact on radio and/or EMC characteristics), - same antenna board. Internal structure of the product as well as circuit boards are shown in sections 5.1 to 5.3 hereafter. Harmony ZB5SKR01 (with output) technical description v1.1 10/27 5.1 – Internal structure Internal structure is as below : Harmony ZB5SKR01 (with output) technical description v1.1 11/27 5.2 – Main board PCBA (with components) : NNZ52906–03 PCB (w/out components) : NHA93098–03 Components side (TOP) Solder side (BOTTOM) 5.3 – Antenna board PCBA (with components) : W816574060111–14 PCB (w/out components) : NVE98563–01 Components side (TOP) Coil side (BOTTOM)

Siège Social : Emitech - 3, rue des Coudriers - Z.A. de l’Observatoire - 78180 MONTIGNY LE BX - France Siret : 344 545 645 00022 - Tél. : 33 (0)1 30 57 55 55 - Fax : 33 (0)1 30 43 74 48 - E-mail : [email protected] - URL : www.emitech.fr S.A. au capital de 1 560 000 € - R.C.S. VERSAILLES 344 545 645 - APE 7112B S 51 RTY 000 EMF 00006 [ 0 1 ] RE051-20-103141-5-A Ed. 0 MPE test report According to the standard: CFR 47 FCC PART 15 Equipment under test: ZB5SKR01 RFID compact station FCC ID: Y7HZB5SK Company: SCHNEIDER ELECTRIC INDUSTRIES Distribution: Mr CORAZZA (Company: Schneider Electric Industries) Number of pages: 5 Technical Verification and Quality Approval Ed. Date Modified Page(s) Name and Function Visa 0 27-Apr-21 Creation T. LEDRESSEUR, Radio Technician Duplication of this document is only permitted for an integral photographic facsimile. It includes the number of pages referenced here above. This document is the result of testing a specimen or a sample of the product submitted. It does not imply an assessment of the conformity of the whole manufactured products of the tested sample. RE051-20-103141-5-A Ed. 0 Page 2/5 DESIGNATION OF PRODUCT: ZB5SKR01 RFID compact station Serial number (S/N): Without Reference / model (P/N): ZB5SKR01 Software version: 1.05 MANUFACTURER: SCHNEIDER ELECTRIC INDUSTRIES COMPANY SUBMITTING THE PRODUCT: Company: SCHNEIDER ELECTRIC INDUSTRIES Address: BLD SALVADOR ALLENDE ZONE INDUSTRIELLE N°3 BP660 16340 L’ISLE D’ ESPAGNAC FRANCE Responsible: Mr CORAZZA Person present during the tests: Mr LAVIGNE (the first day) DATE(S) OF TEST: From 7-Oct-20 to 29-Jun-21 TESTING LOCATION: EMITECH ANGERS laboratory at JUIGNE SUR LOIRE (49) FRANCE FCC Accredited under US-EU MRA Designation Number: FR0009 Test Firm Registration Number: 873677 TESTED BY: S. LOUIS VISA: WRITTEN BY: S. LOUIS RE051-20-103141-5-A Ed. 0 Page 3/5 CONTENTS TITLE PAGE 1. INTRODUCTION ....................................................................................................................................... 4 2. PRODUCT DESCRIPTION ....................................................................................................................... 4 3. NORMATIVE REFERENCE ...................................................................................................................... 5 4. RF EXPOSURE ......................................................................................................................................... 5 RE051-20-103141-5-A Ed. 0 Page 4/5 1. INTRODUCTION This report presents the results of radio test carried out on the following radio equipment: ZB5SKR01 RFID compact station, in accordance with normative reference. The device under test integrates a RFID Radio part. 2. PRODUCT DESCRIPTION Class: B Utilization: Tag and barcode reader Antenna type and gain: integrated antenna, 0dBi Operating frequency band: From 13.110 MHz to 14.010 MHz Channel spacing: Not concerned Modulation: ASK Power source: 24Vdc Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product and the circuit boards are joined with this file. RE051-20-103141-5-A Ed. 0 Page 5/5 3. NORMATIVE REFERENCE The standards and testing methods related throughout this report are those listed below. They are applied on the whole test report even though the extensions (version, date and amendment) are not repeated. CFR 47 (2020) Radio Frequency Devices ANSI C63.10 2013 Procedures for ComplianceTesting of Unlicensed Wireless Devices. 447498 D01 General RF RF Exposure procedures and equipment authorization policies for mobile and Exposure Guidance v06 portable equipment OET BULLETIN 65 Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields 4. RF EXPOSURE MPE Maximum measured power = 41.14 dBμV/m = 0.0000433 mW at 13.56 MHz with P = (E×d) 2 / (30×Gp) with d = 10 m and Gp = 1 In accordance with KDB 447498 D01 General RF Exposure Guidance v06: PSD= EIRP/(4*π*R 2)  0.0000339/(4*π*(20 cm)²)= 0.00000000861 mW/cm² (limit = 0.978 mW/cm²) The equipment fulfils the requirements on power density for general population/uncontrolled exposure and therefore fulfils the requirements of 47 CFR §1.1310.

Siège Social : Emitech - 3, rue des Coudriers - Z.A. de l’Observatoire - 78180 MONTIGNY LE BX - France Siret : 344 545 645 00022 - Tél. : 33 (0)1 30 57 55 55 - Fax : 33 (0)1 30 43 74 48 - E-mail : [email protected] - URL : www.emitech.fr S.A. au capital de 1 560 000 € - R.C.S. VERSAILLES 344 545 645 - APE 7112B S51 RTY 000 INT 000 02 [ 0 3 ] LISTE DES SITES ACCREDITES ET PORTEES DISPONIBLES SUR WWW.COFRAC.FR ACCREDITATIONS N° 1-0107, 1-0826, 1-0827, 1- 1925, 1-2069,1-2070, 1-2206, 1-2376 & 1-6086 RR051-20-103141-9-A Ed. 0 Certification Radio test report According to the standard: CFR 47 FCC PART 15 Equipment under test: ZB5SKR01 RFID compact station FCC ID: Y7HZB5SK Company: SCHNEIDER ELECTRIC INDUSTRIES Distribution: Mr CORAZZA (Company: Schneider Electric Industries) Number of pages: 22 with 4 appendixes Technical Verification and Quality Approval Ed. Date Modified Page(s) Name and Function Visa 0 27-Apr-21 Creation T. LEDRESSEUR, Radio Technician Duplication of this document is only permitted for an integral photographic facsimile. It includes the number of pages referenced here above. This document is the result of testing a specimen or a sample of the product submitted. It does not imply an assessment of the conformity of the whole manufactured products of the tested sample. RR051-20-103141-9-A Ed. 0 Page 2/22 DESIGNATION OF PRODUCT: ZB5SKR01 RFID compact station Serial number (S/N): Without Reference / model (P/N): ZB5SKR01 Software version: 1.05 MANUFACTURER: SCHNEIDER ELECTRIC INDUSTRIES COMPANY SUBMITTING THE PRODUCT: Company: SCHNEIDER ELECTRIC INDUSTRIES Address: BLD SALVADOR ALLENDE ZONE INDUSTRIELLE N°3 BP660 16340 L’ISLE D’ ESPAGNAC France Responsible: Mr CORAZZA Person present during the tests: Mr LAVIGNE (the first day) DATES OF TEST: From 7-Oct-20 to 29-Jun-21 TESTING LOCATION: EMITECH ANGERS laboratory at JUIGNE SUR LOIRE (49) FRANCE FCC Accredited under US-EU MRA Designation Number: FR0009 Test Firm Registration Number: 873677 TESTED BY: S. LOUIS VISA: WRITTEN BY: S. LOUIS RR051-20-103141-9-A Ed. 0 Page 3/22 CONTENTS TITLE PAGE 1. INTRODUCTION ....................................................................................................................................... 4 2. PRODUCT DESCRIPTION ....................................................................................................................... 4 3. NORMATIVE REFERENCE ...................................................................................................................... 4 4. TEST METHODOLOGY ............................................................................................................................ 5 5. TEST EQUIPMENT CALIBRATION DATES ............................................................................................ 6 6. TESTS RESULTS SUMMARY .................................................................................................................. 7 7. MEASUREMENT UNCERTAINTY ............................................................................................................ 8 8. CONDUCTED LIMITS ............................................................................................................................... 9 9. ADDITIONAL PROVISIONS TO THE GENERAL RADIATED EMISSION LIMITATIONS ......................11 10. OPERATION WITHIN THE BAND 13.110 – 14.010 MHZ........................................................................12 11. FIELD STRENGTH OUTSIDE THE BAND 13.110-14.01 MHZ ...............................................................15 APPENDIX 1: TEST EQUIPMENT LIST ........................................................................................................................... 17 APPENDIX 2: 20 DB BANDWIDTH .................................................................................................................................. 20 APPENDIX 3: 99% BANDWIDTH ..................................................................................................................................... 21 APPENDIX 4: BAND EDGE .............................................................................................................................................. 22 RR051-20-103141-9-A Ed. 0 Page 4/22 1. INTRODUCTION This report presents the results of radio test carried out on the following radio equipment: ZB5SKR01 RFID compact station, in accordance with normative reference. The device under test integrates a RFID Radio part. 2. PRODUCT DESCRIPTION Class: B Utilization: Tag and barcode reader Antenna type and gain: integrated antenna, 0dBi Operating frequency range: From 13.110 MHz to 14.010 MHz Number of channels: 1 Channel spacing: Not concerned Modulation: ASK Power source: 24Vdc by AC/DC Adapter Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product and the circuit boards are joined with this file. 3. NORMATIVE REFERENCE The standards and testing methods related throughout this report are those listed below. They are applied on the whole test report even though the extensions (version, date and amendment) are not repeated. CFR 47 FCC Part 15 (2020) Radio Frequency Devices ANSI C63.10 2013 Procedures for ComplianceTesting of Unlicensed Wireless Devices. RR051-20-103141-9-A Ed. 0 Page 5/22 4. TEST METHODOLOGY Radio performance tests procedures given in CFR 47 part 15: Subpart C – Intentional Radiators Paragraph 203: Antenna requirement Paragraph 205: Restricted bands of operation Paragraph 207: Conducted limits Paragraph 209: Radiated emission limits; general requirements Paragraph 212: Modular transmitter Paragraph 215: Additional provisions to the general radiated emission limitations Paragraph 225: Operation within the band 13.110-14.010 MHz RR051-20-103141-9-A Ed. 0 Page 6/22 5. TEST EQUIPMENT CALIBRATION DATES Emitech Number Model Type Last calibration Calibration interval (years) Next calibration due 0 BAT-EMC V3.18.0.26 Software / /…

Text truncated - open the document above for the full version.

Ground plane Ground plane Open area setup Below 30 MHz Turntable 1: Equipment Under Test 2: Measurement antenna 3: Measurement equipment Between 30 MHz and 1 GHz Turntable 1: Equipment Under Test 2: Measurement antenna 3: Measurement equipment 1 2 Antenna mast with range 1 m to 4 m 0.8 m 3 Distance : 10 m 1 2 Antenna height: 1 m 0.8 m 3 Distance : 10 m Installation of Equipment Under Test Open test area – Position 1 Open test area – Position 2 Open area test site Measure below 30 MHz Measure between 30 MHz to 200 MHz Measure between 200 MHz to 1000 MHz Conducted Emissions