Y8AWTX001AIPHONE TX

WTX001A/WTX001AB Warnings and Precautions FCC Warnings Additional Warnings Important Safety Instructions Special note: When placing your unit on a lacquered or natura nish, protect your furniture with a cloth or other protective material. This equipment complies with FCC RF radiation exposure limits set forth an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operationg in conjunction with any other IC Warnings a. "Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be sochosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication." "Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante." b. "This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." "Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  7$%/(2)&217(176 7DEOHRI&RQWHQWV )HDWXUHV %XWWRQVDQG&RQQHFWLRQV 6HWXS 5HFHLYHU6HWXS 7UDQVPLWWHU6HWXS 2SHUDWLRQ &KDQJLQJWKH5)&KDQQHO 6SHFL¿FDWLRQV 1\ULXV:DUUDQW\ ‡ 6HQGPXVLFIURP\RXUL3KRQHL3RGL3DGZLUHOHVVO\WR\RXUVRXQGV\VWHP ‡ 8QFRPSUHVVHGGLJLWDOWUDQVPLVVLRQIRU+'VRXQGTXDOLW\ ‡ (DV\SOXJ SOD\VHWXSQRPHVV\ZLUHV ‡ 3RUWDEOHFRPSDFWVL]H±QREDWWHULHVQHHGHG ‡ ,QFOXGHVDXWRSRZHUVDYHZKHQQRPXVLFLVSOD\HG ‡  *+] WUDQVPLWWHU ZLWK  FKDQQHOV IRU 12 LQWHUIHUHQFH 7KLV XQLW VXSSRUWVXQOLPLWHGUHFHLYHUV ‡ 3URYLGHVFOHDUVRXQGWKURXJKZDOOVÀ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‡ ,I\RXZRXOGOLNHWRFKDQJHWKHRSHUDWLQJFKDQQHOWRLP…

Text truncated - open the document above for the full version.

(Jun 03, 2011) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: Y8AWTX001A We hereby request confidential treatment of information accompanying this application as outlined below: Block Diagrams Schematics Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title: Liming Jiang/Certification Engineer Contact information / address Tel: 86-769-87771430 EXT. 5275 Fax: 86-769-87771430 EXT. 5265 Web site: www.ngailik.com E-mail: [email protected]

FCC ID: Y8AWTX001A POWER OF ATTORNEY (2011-06-03) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize I-Test Laboratory (MR. Pauler LI, Manager) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by I-Test Laboratory (MR. Pauler LI, Manager) on our behalf shall have the same effect as acts of our own. This authorization expires on (2011-09-03). This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, (Ngai Lik Electronics Enterprises Limited), are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, ( Ngai Lik Electronics Enterprises Limited ) <SIGNATURE> Liming Jiang/Certification Engineer

External and Internal Photos of the EUT External Photos

Label Location

S:1:1 S:2:1 Brand:NYRIUS Model no.: WTX001A Color: Print on buttom enclosure of main with Size:19x13mm NiAA300b iPhone TX INPUT: 3.3V 100mA FCC ID: Y8AWTX001A Ngai Lik Electronics Enterprises Limited Made In China IC: 9485A-WTX001AIC: 9485A-WTX001A WTX001A iPhone TX INPUT: 3.3V 100mA FCC ID: Y8AWTX001A Ngai Lik Electronics Enterprises Limited Made In China IC: 9485A-WTX001AIC: 9485A-WTX001A NiAA300b iPhone TX INPUT: 3.3V 100mA FCC ID: Y8AWTX001A Ngai Lik Electronics Enterprises Limited Made In China IC: 9485A-WTX001AIC: 9485A-WTX001A WTX001A iPhone TX INPUT: 3.3V 100mA FCC ID: Y8AWTX001A Ngai Lik Electronics Enterprises Limited Made In China IC: 9485A-WTX001AIC: 9485A-WTX001A

Internal Photos

ITL Page 1 of 22 Report. No. 1110747601 TEST REPORT Applicant: Ngai Lik Electronics Enterprises Limited Address of Applicant: Flat 29-32, 8/F., Block B, Focal Industrial Centre, 21 Man Lok Street, Hung H Kowloon, Hong Kong. Manufacturer: Ngai Lik Electronics Enterprises Limited Address of Manufacturer: Flat 29-32, 8/F., Block B, Focal Industrial Centre, 21 Man Lok Street, Hung H Kowloon, Hong Kong. Product name: iPhone Tx Model: WTX001A,NiAA300b Rating(s): 3.3Vdc 100mA Trademark: Nyrius FCC test lab register number ： 935596 FCC ID: Y8AWTX001A Operating frequency range: 2404.8~2474.5 MHz Standards: FCC Part 15.249: Operation within the bands 920-928 MHz, 2400-2483.5 MHz, 5725-5850 MHz and 24.0 - 24.25 GHz. Data of Receipt: 2011-04-21 Date of Test: 2011-04-27 Date of Issue: 2011-05-05 Test Result Pass* * In the configuration tested, the test item complied with the standards specified above. Authorized for issue by : Test by: Reviewed by: May.05.2011 Jumy Qiu May.05.2011 Pauler Li Project Engineer Project Engineer Date Name/Position Signature Date Name/Position Signature This report is for the exclusive use of ITL’s client and is provided pursuant to the agreement between ITL assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the C lient is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the ITL name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by ITL. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an ITL certification program. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. ITL Page 2 of 22 Report. No. 1110747601 This report is for the exclusive use of ITL’s client and is provided pursuant to the agreement between ITL assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the ITL name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by ITL. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an ITL certification program. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. Testing Laboratory information: Testing Laboratory Name .......... : I-Test Laboratory Address ..................................... : 1-2 floor, South Block, Building A2 , No 3 Keyan Lu, Science City, Guangzhou, Guangdong Province, P.R. China Testing location ......................... : Same as above Tel................................................ : 0086-20-32209330 Fax .............................................. : 0086-20-62824387 E-mail .......................................... : [email protected] Possible test case verdicts: - test case does not apply to the test object.. :N/A - test object does meet the requirement........ :P (Pass) - test object does not meet the requirement . :F (Fail) General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report would be invalid test report without all the signatures of testing technician and approver. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. General product information: The applied models WTX001A and NiAA300b are the same except model name. All the tests are carried out on model NiAA300b. ITL Page 3 of 22 Report. No. 1110747601 This report is for the exclusive use of ITL’s client and is provided pursuant to the agreement between ITL assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the ITL name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by ITL. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an ITL certification program. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. Contents TEST REPORT................................................................................................................... 1 1.TEST STANDARDS....................................................................................................... 4 2 SUMMARY........................................................................................................................ 5 2.1 Equipment Under Test................................................................................................................5 2.2 Short description of the Equipment under Test (EUT)......................................................5 2.3 EUT operation mode.......................................................................................…

Text truncated - open the document above for the full version.

Test Setup Photos of the EUT (Radiated emission below 1GHz) (Radiated emission above 1GHz)