YAI19013.5G data card

InnoComm Mobile Technology Corp. Amazon Modem Module Development Kit User Manual Version 1.1 Editor: Cathy Lee [挑選日期] Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 TABLE OF CONTENT 1. INTRODUCTION ...................................................................................... 3 1.1. DEVELOPMENT KIT CONTENT................................................................. 3 1.2. A MAZON MODEM MODULE AND EXTENSION BOARD PHOTO......................... 4 1.2.1. Amazon 1: PCI-E Type ............................................................................. 4 1.2.2. Amazon 2: BTB Connector Type .............................................................. 5 1.2.3. Extension Board........................................................................................ 6 2. HW TEST SETUP..................................................................................... 6 2.1. CONNECT PC USB PORT TO EXTENSION BOARD USB CONNECTOR......... 6 2.2. C ONNECT PC USB PORT TO EXTENSION BOARD USIF 1 PORT................ 8 3. SW TEST SETUP ................................................................................... 10 3.1 DRIVER INSTALLATION......................................................................... 10 3.1.1. HS-USB Driver Installation...................................................................... 10 3.1.2. Prolific Driver Installation ........................................................................ 13 3.1.3. Connection Manager Installation ............................................................ 14 3.2 CONNECTION MANAGER...................................................................... 15 3.3 C ONNECTION WITH TEST INSTRUMENT.................................................. 16 APPENDIX 1: DETAIL DESCRIPTION OF EXTENSION BOARD .............. 19 APPENDIX 2: FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT ................................................................................................ 22 Notice Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 InnoComm may make changes to the user guide at any time; the information in this document is subject to change without notice. 1. INTRODUCTION This document describes operation and test setup of Amazon modem module. There are two types with Amazon modem module, one is PCI-E type (Amazon 1) and the other one is BTB connector type (Amazon 2). Extension board is used to connect Amazon modem module to PC side to do function test and debug. 1.1. Development Kit Content The development kit for Amazon modem module contains following items. 1. Modem Module: Amazon modem module x 1 2. Extension Board x 1 3. RF cable x 1 4. External Antenna x 1 5. SW driver disk x 1 Figure 1-1 Development Kit Content Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 1.2. Amazon modem module and Extension board photo 1.2.1. Amazon 1: PCI-E Type Figure 1-2 Amazon1 TOP Figure 1-3 Amazon1 BOTTOM Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 1.2.2. Amazon 2: BTB Connector Type Figure 1-4 Amazon2 TOP Figure 1-5 Amazon2 BOTTOM Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 1.2.3. Extension Board Figure 1-6 Extension Board 2. HW TEST SETUP 2.1. Connect PC USB Port to Extension Board USB Connector Application: Test with Instrument (CMU200, Agilent 8960...) or Real network test Requirement: SW: Driver, CM (Connection manager) installation HW: Test SIM for test with Instrument (CMU200, Agilent8960....etc) x1 Real SIM for test with Real network (Via external antenna) x1 Power supply x 1 Input voltage --- 3.3 V for Amazon 1 --- 3.7 V for Amazon 2 Instrument or external antenna x1 RF cable x 1 USB cable x1 Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 +3.7+3.7 DC POWER SUPPLY CMU200 PC USB PORT RF cable Power cable USB cable (to USB) Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 2.2. Connect PC USB Port to Extension Board USIF 1 Port Application: Test with Instrument (CMU200, Agilent 8960...) Requirement: SW: Driver HW: Test SIM card x 1 Power supply x 1 Input voltage --- 3.3 V for Amazon 1 --- 3.7 V for Amazon 2 Instrument (CMU200, Agilent8960....etc) x1 RF cable x 1 USB cable x 1 Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 Power cable RF cable +3.7V+3.7V DC POWER SUPPLY CMU200 PC USB PORT USB cable (to USIF1) Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 3. SW TEST SETUP 3.1 Driver Installation 3.1.1. HS-USB Driver Installation The HS-USB driver should be installed when using USB Port. Following are the steps for installation. Step 1: Unzip and install the driver. File name: WMC_Comneon2_3.12.1 Driver\ Setup.exe. Then it will create one folder under C:\Program Files\Comneon\Highspeed Modem 0x20\Drivers\. Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 Figure 3-1 Setup.exe Figure 3-2 Driver folders Step 2: Connect UE device to PC with USB2.0 cable, and power on device Step 3: Install HS_USB Driver to PC. When device powered on and PC detect the device. The driver will install automatically or set direction to C:\Program Files\Comneon\Highspeed Modem 0x20\Drivers\ Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 Figure 3-3: Auto installations 6 virtual ports will be installed. (Comneon Mobile Highspeed Port), and One Modem Port. (Comneon Mobile Highspeed Modem MPE1) Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 Figure 3-4 Virtual Ports 3.1.2. Prolific Driver Installation The Prolific Driver should be installed when using USIF 1 or USIF 5 Port. Following are the steps for installation. Step 1: Unzip and install File name: PL2303_Prolific_DriverInstaller_v10518.exe. Step 2: Plug in USIF1 or USIF 5. PC will detect USB to Serial Ports and install the driver automatically. Figure 3-5 USIF1 and USIF 5 Port USIF 1 USIF 5 HS_USB Amazon Modem Module Development Kit User Manual Ver1.1 7/26/2010 Figure 3-6 USB to Serial Ports 3.1.3. Con…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (current) 1.0 1.0 August 19, 2010 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 Sporton International Inc. August 19, 2010 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, _Sporton International Inc._hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product description: 3.5G data card Model name: AMAZON We affirm that between SIEMIC and __Sporton Internationl Inc.___, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature: Client’s name / title: Roy Wu Contact information / address: No.52, HwaYa 1st Rd., Kwei-Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C.

Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 1 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 1. External Photograph of EUT Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 2 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 3 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 4 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 5 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 6 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 720510 Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 7 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 2. Internal Photograph of EUT

Project Name: File Name : Ver: Designer : Date : Note: Amazon 2010.07.12 V01XXXXXXX Label mobile technology Label 28.2mm x 14.5mm

Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 8 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 9 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 10 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 Photographs of EUT Report No.: EP052706 Brand Name: InnoComm Mobile / Model Name: AMAZON SPORTON INTERNATIONAL INC. Page Number : 11 of 11 TEL : 886-3-327-3456 Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 720510

SPORTON INTERNATIONAL INC. Page Number : 1 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 RF Exposure Evaluation Report Report No. : FA052706 RF Exposure Evaluation Report APPLICANT : InnoComm Mobile Technology Corporation EQUIPMENT : 3.5G data card BRAND NAME : InnoComm Mobile MODEL NAME : AMAZON FCC ID : YAI1901 FILING TYPE : Certification STANDARD : OET Bulletin 65 Supplement C (Edition 01-01) We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with FCC OET Bulletin 65 Supplement C (Edition 01-01). The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Roy Wu / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 RF Exposure Evaluation Report Report No. : FA052706 Table of Contents REVISION HISTORY .......................................................................................................................................... 3 1. INTRODUCTION .......................................................................................................................................... 4 2. ADMINISTRATION DATA ........................................................................................................................... 6 2.1 Testing Laboratory ............................................................................................................................. 6 2.2 Applicant ............................................................................................................................................ 6 2.3 Manufacturer ...................................................................................................................................... 6 3. GENERAL INFORMATION ......................................................................................................................... 7 3.1 Description of Device Under Test (DUT) ........................................................................................... 7 4. RF EXPOSURE EVALUATION ................................................................................................................... 8 4.1 Radio Frequency Radiation Exposure Evaluation ............................................................................. 8 SPORTON INTERNATIONAL INC. Page Number : 3 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 RF Exposure Evaluation Report Report No. : FA052706 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA052706 Rev. 01 Initial issue of report Jul. 21, 2010 SPORTON INTERNATIONAL INC. Page Number : 4 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 RF Exposure Evaluation Report Report No. : FA052706 1. Introduction The report has been prepared on behalf of InnoComm Mobile Technology Corporation 3.5G data card to show compliance with the RF Exposure.  Requirements Three different categories of transmitters are defined by the FCC in OET Bulletin 65. These categories are fixed installation, mobile and portable and are defined as follows:  Fixed installation: Fixed location means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. Additionally, distance to humans form the antenna is maintained to at least 2 meters.  Mobile Devices: A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to be generally used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitters’s radiating structures and the body of the user or nearby persons. Transmitters designed to be used by consumers or workers that can be easily re-located are considered mobile devices if they meet the 20 centimeter separation requirement. The FCC rules for evaluating mobile devices for RF compliance are found in 47 CFR 2.1091.  Portable Devices: A portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable device requirements are found in Section 2.1093 of the FCC’s Rules (47 CFR 2.1093) For this test report the InnoComm Mobile AMAZON is being done as a mobile device and the MPE is evaluated at the 20cm test distance. The FCC also categorizes the use of the device as based upon the user’s awareness and ability to exercise control over his or her exposure. The two categories defined are Occupational/Controlled Exposure and General Population/Uncontrolled Exposure. These two categories are defined as follows: SPORTON INTERNATIONAL INC. Page Number : 5 of 8 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 RF Exposure Evaluation Report Report No. : FA052706  Occupational/controlled Exposure: In general, occupational/controlled exposure limits are applicable to situation in which persons are exposed as a consequence of their employment, who have been made fully aware of the potential for exposure. Awareness of the potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a RF safety program. If appropriate, warning signs and labels can also be used to establish such awareness by providing prominent information on the risk of potential exposure and instructions on methods to minimize su…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : 1 of 67 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 FCC RF Test Report Report No. : FG052706 FCC RF Test Report APPLICANT : InnoComm Mobile Technology Corporation EQUIPMENT : 3.5G data card BRAND NAME : InnoComm Mobile MODEL NAME : AMAZON FCC ID : YAI1901 STANDARD : FCC 47 CFR Part 2, 22(H), 24(E) CLASSIFICATION : PCS Licensed Transmitter (PCB) Tx/Rx FREQUENCY RANGE : GSM850 : 824.2 ~ 848.8 MHz / 869.2 ~ 893.8 MHz GSM1900 : 1850.2 ~ 1909.8 MHz / 1930.2 ~ 1989.8 MHz WCDMA Band V : 826.4 ~ 846.6 MHz / 871.4 ~ 891.6 MHz WCDMA Band II : 1852.4 ~ 1907.6 MHz / 1932.4 ~ 1987.6 MHz MAX. ERP/EIRP POWER : GSM850 (GPRS 8) : 0.70 W GSM850 (EDGE 8) : 0.33 W GSM1900 (GPRS 8) : 0.41 W GSM1900 (EDGE 8) : 0.37 W WCDMA Band V (RMC 12.2Kbps) : 0.10 W WCDMA Band II (RMC 12.2Kbps) : 0.11 W EMISSION DESIGNATOR : GMSK : 244KGXW 8PSK : 246KG7W QPSK : 4M08F9W The product was received on May 27, 2010 and completely tested on Jun. 22, 2010. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI / TIA / EIA-603-C-2004 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Roy Wu / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 67 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 FCC RF Test Report Report No. : FG052706 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ..................................................................................................................................... 5 1.3 Feature of Equipment Under Test ..................................................................................................... 5 1.4 Testing Site........................................................................................................................................ 7 1.5 Applied Standards ............................................................................................................................. 7 1.6 Ancillary Equipment List .................................................................................................................... 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Test Mode.......................................................................................................................................... 8 2.2 Connection Diagram of Test System ................................................................................................ 9 3 TEST RESULT ........................................................................................................................................... 10 3.1 Conducted Output Power Measurement ......................................................................................... 10 3.2 Effective Radiated Power and Effective Isotropic Radiated Power Measurement ......................... 12 3.3 Occupied Bandwidth Measurement ................................................................................................ 18 3.4 Band Edge Measurement ................................................................................................................ 25 3.5 Conducted Emission Measurement ................................................................................................ 32 3.6 Field Strength of Spurious Radiation Measurement ....................................................................... 48 3.7 Frequency Stability Measurement ................................................................................................... 62 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 66 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 67 APPENDIX A. PHOTOGRAPHS OF EUT APPENDIX B. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL INC. Page Number : 3 of 67 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 FCC RF Test Report Report No. : FG052706 REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FG052706 Rev. 01 Initial issue of report Jul. 21, 2010 SPORTON INTERNATIONAL INC. Page Number : 4 of 67 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 FCC RF Test Report Report No. : FG052706 SUMMARY OF TEST RESULT Report Section FCC Rule IC Rule Description Limit Result Remark 3.1 §2.1046 N/A Conducted Output Power N/A PASS - 3.2 §22.913(a)(2) RSS-132(4.4) SRSP-503(5.1.3) Effective Radiated Power < 7 Watts PASS - 3.2 §24.232(c) RSS-133 (6.4) SRSP-510(5.1.2) Equivalent Isotropic Radiated Power < 2 Watts PASS - 3.3 §2.1049 §22.917(a) §24.238(a) N/A Occupied Bandwidth N/A PASS - 3.4 §2.1051 §22.917(a) §24.238(a) RSS-132 (4.5.…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : B1 of B2 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 FCC RF Test Report Report No. : FG052706 Appendix B. Setup Photographs <Radiated Emission> Front View Rear View SPORTON INTERNATIONAL INC. Page Number : B2 of B2 TEL : 886-3-327-3456 Report Issued Date : Jul. 21, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : YAI1901 FCC RF Test Report Report No. : FG052706 Remote View