YCP-STM32WB5M001STM32WB5MMG.

DB4047 - Rev 2 - December 2019 For further information contact your local STMicroelectronics sales office. www.st.com STMicroelectronics SAS 32WB5M Data brief Bluetooth ® Low Energy 5.0 and 802.15.4 module Top view Bottom view These pictures are not contractual Features • Module name : BLE SiP Dory • Brand : STMelectronics • Model name : STM32WB5M • Integrated chip antenna • Bluetooth ® Low Energy 5.0, ZigBee ® 3.0, OpenThread certified • IEEE 802.15.4-2011 MAC PHY • Supports 2 Mbits/s • TX output power up to +6 dBm with 1 dB steps • RX sensitivity: -96 dBm (Bluetooth ® Low Energy at 1 Mbps), -100 dBm (802.15.4) • Dedicated Arm ® Cortex ® -M0+ for radio and security tasks • Dedicated Arm ® Cortex ® -M4 CPU with FPU and ART (adaptative real-time accelerator) up to 64 MHz speed • 1-Mbyte Flash, 256-Kbyte SRAM • Embedded 32 MHz radio and 32 kHz RTC crystals • Integrated IPD for best-in-class and reliable antenna matching • 1.8 V to 3.6 V VDD range • -40 °C to 85 °C temperature range • Built-in security feature as secure firmware installation (SFI) for radio stack, customer key storage/key management services, PKA, AES 256-bit, TRNG, PCROP, CRC, 96-bit UID, possibility to derive 802.15.4 and Bluetooth ® Low Energy 48-bit UEI • Certifications: CE, FCC, IC, JRF, SRRC, RoHS, REACH, GOST, KC, NCC • Two layers PCB compatible (using external raw pins only) Application • Lighting and home automation • Wireless audio devices • Wellness, healthcare, personal trackers • Gaming and toys • Smart locks • Beacons and accessories • Industrial Description The STM32WB5MMG is an ultra-low-power and small form factor certified wireless module. It supports Bluetooth ® Low Energy 5.0, ZigBee ® 3.0, OpenThread and 802.15.4 proprietary protocols. Based on STMicroelectronics STM32WB55VG wireless SOC, the STM32WB5MMG provides best-in-class RF performance thanks to its good receiver sensitivity and a high output power signal. Its low-power features enable extended battery life time, small coin-cell batteries or energy harvesting. The STM32WB5MMG requires no RF expertise and is the best way to speed-up any development and to reduce associated costs. The module is completely protocol stack royalty-free. Product summary Order code STM32WB5MMG Temperature range -40 °C to 85 °C Package 10x10 LGA 86L Package dimensions ( mm) 7.3 x 11 x 1.342 x 0.435 pitch Packaging Tape and reel ST Restricted - Subject to Non-Disclosure Agreement – Do not copy FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Label requirements If the identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module, Contains FCC ID: YCP-STM32WB5M001, Contain IC: 8976A-STM32WB5M01. HVIN: STM32WB5M01 (XXXX should be corrected in accordance with current module ID) Other Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the multi-transmitter procedures. The host integrator must follow the integration instructions provided in this document and ensure that the composite-system end product complies with the requirements by a technical assessment or evaluation to the rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the requirements by a technical assessment or evaluation to the rules, including the transmitter operation and should refer to guidance in KDB 996369. RF Exposure statement The module antenna must be installed to meet the RF exposure compliance separation distance of “20 cm” and any additional testing and authorization process as required For Canada, the “compliance statement and unlicensed device usage conditions” which must be shown in the user manual has changed. It should now read like this: This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, (2) this device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’…

Text truncated - open the document above for the full version.

STMicroelectronics SAS 190 Avenue Celestin COQ 13106 ROUSSET FRANCE QF094234 Page 1 of 1 Revision 0 Authority to Act as Agent Date: 2020-05-06 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern: I appoint TUV Taiwan to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with STMicroelectronics SAS / 190 Avenue Celestin Coq, Rousset, France For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months By : JOEL HULOUX (Signature) (Print Name) Title : Director Lobbying & Standardization Telephone : 33442688625 On behalf of : STMicroelectronics SAS (Company Name)

STMicroelectronics SAS 190 Avenue Celestin COQ 13106 ROUSSET FRANCE Confidentiality Letter Date: 2020.06.16 Subject: Confidentiality Request for FCC ID: YCP-STM32WB5M001 and IC: 8976A-STM32WB5M01; Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Part List/Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent User’s Manual STMicroelectronics SAS has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: JOEL HULOUX (Signature/Title) (Print name)

Appendix P Photo Documentation Page 1 of 5 50348466 001, 50348467 001, 50348468 001, 50348469 001 , Product: STM32WB5MMG Type Identification: 32WB5M Appendix P Photo Documentation Page 2 of 5 50348466 001, 50348467 001, 50348468 001, 50348469 001 , Product: STM32WB5MMG Type Identification: 32WB5M Appendix P Photo Documentation Page 3 of 5 50348466 001, 50348467 001, 50348468 001, 50348469 001 , Product: STM32WB5MMG Type Identification: 32WB5M Appendix P Photo Documentation Page 4 of 5 50348466 001, 50348467 001, 50348468 001, 50348469 001 , Product: STM32WB5MMG Type Identification: 32WB5M

Label on package Date 2020/07/06 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Dear Examiner, We are asking for the permission from “STMicroelectronics SAS.” to place the label for the product into the user manual and package instead of the exterior of the device, due to the dimensions of the “Wireless module” being extremely small. Brand Name: STMicroelectronics SAS Product name: STM32WB5MMG Model name: 32WB5M IC: 8976A‐STM32WB5M01 HVIN: STM32WB5M01 Sincerely, By: JOEL HULOUX (Signature/Title) (Print name) STMicroelectronics SAS 1 90 Avenue Celestin COQ 13106 ROUSSET FRANCE

Appendix P Photo Documentation Page 5 of 5 50348466 001, 50348467 001, 50348468 001, 50348469 001 , Product: STM32WB5MMG Type Identification: 32WB5M Antenna

Produkte Products Prüfbericht - Nr.: Test Report No. Seite 1 von 2 Page 1 of 2 1 Safety Human Exposure 1.1 Radio Frequency Exposure Compliance 1.1.1 Electromagnetic Fields RESULT: Pass Test Specification Test standard : CFR47 FCC Part 2: Section 2.1091 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 v06, section 7 RSS-102 Issue 5 March 2015, section 2.5.1  FCC requirements FCC requirement: Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20cm normally can be maintained between the user and the device. MPE Calculation Method according to KDB 447498 v06 Power Density: S (mW/cm 2 ) = PG/4πR 2 or EIRP/4πR 2 Where: S = power density (mW/cm 2 ) P = power input to the antenna (mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm) From the peak RF output power, the minimum mobile separation distance, d=20 cm, as well as the antenna gain (Max. 2.0 dBi), the RF power density can be calculated as below: S (mW/cm 2 ) = PG/4πR 2 a) EUT RF Exposure Evaluation standalone operations Test Mode Measured Conducted Power Antenna Gain (dBi) Measured e.i.r.p (mW) S (mW/cm 2 ) = PG/4πR 2 Limit (mW/cm 2 ) (dBm) (mW) (dBm) (mW) BLE 3.90 2.45 2 5.90 3.89 0.0008 1.0 Zigbee 4.86 3.13 2 6.86 4.85 0.001 1.0 b) EUT RF Exposure Evaluation simultaneous transmission operations Simultaneous transmission mode The sum of the ratios Result Not supported N/A N/A Produkte Products Prüfbericht - Nr.: Test Report No. Seite 2 von 2 Page 2 of 2  IC requirements: The EUT shall comply with the requirement of RSS-102 section 2.5.2. Exemption from Routine Evaluation Limits – RF Exposure Evaluation RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10 -2 ƒ 0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz;  RF exposure evaluation exempted power for BLE: 2.670 W  RF exposure evaluation exempted power for ZigBee: 2.671 W a) EUT RF Exposure Evaluation standalone operations: Test Mode Measured Peak Power Antenna Gain (dBi) Measured e.i.r.p (mW) (dBm) (W) (dBm) (W) BLE 3.90 2.45 2 5.90 3.89 Zigbee 4.86 3.13 2 6.86 4.85 b) EUT RF Exposure Evaluation simultaneous transmission operations Simultaneous transmission mode The sum of the ratios Result Not supported N/A N/A “RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.”

Test Report No.50348466 001 Appendix D: Radiated and Mains Spurious Emission Data (File: 50348466 001Appendix D) Contents Spurious Emissions, Bandedge for BLE 1M .................................................................................................. 2 Spurious Emissions, Bandedge for BLE 2M ................................................................................................ 14 Spurious Emissions, TX Mode, 9kHz-30MHz, BLE 1M ............................................................................. 26 Spurious Emissions, TX Mode, 30MHz-1GHz, BLE 1M ............................................................................ 28 Spurious Emissions, TX Mode, 1GHz-26.5GHz, BLE 1M ......................................................................... 30 Spurious Emissions, TX Mode, 1GHz-26.5GHz, BLE 2M ......................................................................... 36 Spurious Emissions, AC Mains, BLE 1M .................................................................................................... 42 2 Spurious Emissions, Bandedge for BLE 1M 2402MHz 3 4 5 6 2440MHz 7 8 9 10 2480MHz 11 12 13 14 Spurious Emissions, Bandedge for BLE 2M 2402MHz 15 16 17 18 2440MHz 19 20 21 22 2480MHz 23 24 25 26 Spurious Emissions, TX Mode, 9kHz-30MHz, BLE 1M 2402MHz 27 28 Spurious Emissions, TX Mode, 30MHz-1GHz, BLE 1M 2402MHz 29 30 Spurious Emissions, TX Mode, 1GHz-26.5GHz, BLE 1M 2402MHz 31 32 2440MHz 33 34 2480MHz 35 36 Spurious Emissions, TX Mode, 1GHz-26.5GHz, BLE 2M 2402MHz 37 38 2440MHz 39 40 2480MHz 41 42 Spurious Emissions, AC Mains, BLE 1M 2402MHz 43

Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: 50348466 001 Auftrags-Nr.: Order no.: 238112162 Seite 1 von 42 Page 1 of 42 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 6-Feb-2020 Auftraggeber: Client: STMicroelectronics SAS 190 Avenue Celestin Coq, Rousset, France Prü fgegenstand: Test item: STM32WB5MMG Bezeichnung / Typ-Nr.: Identification / Type no.: 32WB5M Auftrags-Inhalt: Order content: FCC Part 15C/ISED RSS-247/ Test report (BLE) Prü fgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.247(DTS) ISED RSS-247 ISSUE 2 FEB 2017 Wareneingangsdatum: Date of sample receipt: 19-Feb-2020 Prü fmuster-Nr.: Test sample no: A001065433-010, A001065433-024 Prü fzeitraum: Testing period: 21-Feb-2020 - 24-Mar-2020 Ort der Prü fung: Place of testing: EMC/RF Laboratory Taipei Prü flaboratorium: Testing laboratory: Taipei Testing laboratories Prü fergebnis*: Test result*: Pass ü berprü ft von: reviewed by: M a r s Y . J . Li n genehmigt von: authorized by: R y a n W . T . C h e n Datum: 02-Jul-2020 Date: Datum: 02-Jul-2020 Date: Stellung / Position: Project Engineer Stellung / Position: Project Manager Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Produkte Products Prü fbericht - Nr.: Test Report No. 50348466 001 Seite 2 von 42 Page 2 of 42 TEST SUMMARY 5.1.1 ANTENNA REQUIREMENT RESULT: Passed 5.1.2 PEAK OUTPUT POWER RESULT: Passed 5.1.3 6DB BANDWIDTH AND 99% BANDWIDTH RESULT: Passed 5.1.4 POWER DENSITY RESULT: Passed 5.1.5 CONDUCTED SPURIOUS EMISSIONS AND FREQUENCY BAND EDGE MEASURED IN 100KHZ BANDWIDTH RESULT: Passed 5.1.6 SPURIOUS EMISSION RESULT: Passed 5.2.1 MAINS CONDUCTED EMISSIONS RESULT: Passed 6.1.1 ELECTROMAGNETIC FIELDS RESULT: Passed Produkte Products Prü fbericht - Nr.: Test Report No. 50348466 001 Seite 3 von 42 Page 3 of 42 Contents 1. GENERAL REMARKS ............................................................................................... 5 1.1 COMPLEMENTARY MATERIALS ................................................................................. 5 1.2 DECISION RULE OF CONFORMITY .................................................................................. 5 2. TEST SITES ............................................................................................................ 6 2.1 TEST LABORATORY ................................................................................................ 6 2.2 TEST FACILITY ........................................................................................................ 6 2.3 LIST OF TEST AND MEASUREMENT INSTRUMENTS ...................................................... 7 2.4 TRACEABILITY ........................................................................................................ 8 2.5 CALIBRATION ......................................................................................................... 8 2.6 MEASUREMENT UNCERTAINTY ................................................................................. 8 3. GENERAL PRODUCT INFORMATION ........................................................................... 9 3.1 PRODUCT FUNCTION AND INTENDED USE ................................................................. 9 3.2 SYSTEM DETAILS AND RATINGS ............................................................................... 9 3.3 INDEPENDENT OPERATION MODES ......................................................................... 10 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS ............................................ 10 3.5 SUBMITTED DOCUMENTS ....................................................................................... 10 4. TEST SET-UP AND OPERATION MODES ................................................................... 11 4.1 PRINCIPLE OF CONFIGURATION SELECTION ............................................................ 11 4.2 TEST OPERATION AND TEST SOFTWARE................................................................. 11 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ............................................... 12 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE .............................................. 12 4.5 TEST SETUP DIAGRAM .......................................................................................... 12 5. TEST RESULTS ..................................................................................................... 14 5.1 TRANSMITTER REQUIREMENT & TEST SUITES ......................................................... 14 5.1.1 Antenna Requirement ................................................................................................................ 14 5.1.2 Peak Output Power .................................................................................................................... 15 5.1.3 6dB Bandwidth and 99% Bandwidth .......................................................................................... …

Text truncated - open the document above for the full version.

Test Report No.50348468 001 Appendix D: Radiated and Mains Spurious Emission Data (File: 50348468 001 Appendix D) Contents Spurious Emissions, Band Edges ................................................................................................................... 2 Spurious Emissions, TX Mode, 9kHz-30MHz ............................................................................................. 14 Spurious Emissions, TX Mode, 30MHz-1GHz ............................................................................................ 16 Spurious Emissions, TX Mode, 1GHz-26.5GHz.......................................................................................... 18 Spurious Emissions, AC Mains .................................................................................................................... 24 2 Spurious Emissions, Band Edges 2405MHz 3 4 5 6 2435MHz 7 8 9 10 2480MHz 11 12 13 14 Spurious Emissions, TX Mode, 9kHz-30MHz 2405MHz 15 16 Spurious Emissions, TX Mode, 30MHz-1GHz 2405MHz 17 18 Spurious Emissions, TX Mode, 1GHz-26.5GHz 2405MHz 19 20 2435MHz 21 22 2480MHz 23 24 Spurious Emissions, AC Mains 2405MHz 25

Prü fbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: 50348468 001 Auftrags-Nr.: Order no.: 238112162 Seite 1 von 36 Page 1 of 36 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 6-Feb-2020 Auftraggeber: Client: STMicroelectronics SAS 190 Avenue Celestin Coq, Rousset, France Prü fgegenstand: Test item: STM32WB5MMG Bezeichnung / Typ-Nr.: Identification / Type no.: 32WB5M Auftrags-Inhalt: Order content: FCC Part 15C/ISED RSS-247/ Test report (Zigbee) Prü fgrundlage: Test specification: FCC 47CFR Part 15: Subpart C Section 15.247(DTS) ISED RSS-247 ISSUE 2 FEB 2017 Wareneingangsdatum: Date of sample receipt: 19-Feb-2020 Prü fmuster-Nr.: Test sample no: A001065433-003, A001065433-004 Prü fzeitraum: Testing period: 22-Feb-2020 - 3-Mar-2020 Ort der Prü fung: Place of testing: EMC/RF Laboratory Taipei Prü flaboratorium: Testing laboratory: Taipei Testing laboratories Prü fergebnis*: Test result*: Pass ü berprü ft von: reviewed by: M a r s Y . J . L i n genehmigt von: authorized by: Ryan W .T. Chen Datum: 02-Jul-2020 Date: Datum: 02-Jul-2020 Date: Stellung / Position: Project Engineer Stellung / Position: Project Manager Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Produkte Products Prü fbericht - Nr.: Test Report No. 50348468 001 Seite 2 von 36 Page 2 of 36 TEST SUMMARY 5.1.1 ANTENNA REQUIREMENT RESULT: Passed 5.1.2 PEAK OUTPUT POWER RESULT: Passed 5.1.3 6DB BANDWIDTH AND 99% BANDWIDTH RESULT: Passed 5.1.4 POWER DENSITY RESULT: Passed 5.1.5 CONDUCTED SPURIOUS EMISSIONS AND FREQUENCY BAND EDGE MEASURED IN 100KHZ BANDWIDTH RESULT: Passed 5.1.6 SPURIOUS EMISSION RESULT: Passed 5.2.1 MAINS CONDUCTED EMISSIONS RESULT: Passed 6.1.1 ELECTROMAGNETIC FIELDS RESULT: Passed Produkte Products Prü fbericht - Nr.: Test Report No. 50348468 001 Seite 3 von 36 Page 3 of 36 Contents 1. GENERAL REMARKS ............................................................................................... 5 1.1 COMPLEMENTARY MATERIALS ................................................................................. 5 1.2 DECISION RULE OF CONFORMITY .................................................................................. 5 2. TEST SITES ............................................................................................................ 6 2.1 TEST LABORATORY ................................................................................................ 6 2.2 TEST FACILITY ........................................................................................................ 6 2.3 LIST OF TEST AND MEASUREMENT INSTRUMENTS ...................................................... 7 2.4 TRACEABILITY ........................................................................................................ 8 2.5 CALIBRATION ......................................................................................................... 8 2.6 MEASUREMENT UNCERTAINTY ................................................................................. 8 3. GENERAL PRODUCT INFORMATION ........................................................................... 9 3.1 PRODUCT FUNCTION AND INTENDED USE ................................................................. 9 3.2 SYSTEM DETAILS AND RATINGS ............................................................................... 9 3.3 INDEPENDENT OPERATION MODES ......................................................................... 10 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS ............................................ 10 3.5 SUBMITTED DOCUMENTS ....................................................................................... 10 4. TEST SET-UP AND OPERATION MODES ................................................................... 11 4.1 PRINCIPLE OF CONFIGURATION SELECTION ............................................................ 11 4.2 TEST OPERATION AND TEST SOFTWARE................................................................. 11 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ............................................... 12 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE .............................................. 12 4.5 TEST SETUP DIAGRAM .......................................................................................... 12 5. TEST RESULTS ..................................................................................................... 14 5.1 TRANSMITTER REQUIREMENT & TEST SUITES ......................................................... 14 5.1.1 Antenna Requirement ................................................................................................................ 14 5.1.2 Peak Output Power .................................................................................................................... 15 5.1.3 6dB Bandwidth and 99% Bandwidth .......................................................................................... 17 5.…

Text truncated - open the document above for the full version.

Produkte Products Prü fbericht - Nr.: Test Report No. 50348466 001 Seite 37 von 42 Page 37 of 42 7. Photographs of the Test Set-Up Photograph 1: Set-up for Spurious Emissions (Front View 1) Photograph 2: Set-up for Spurious Emissions (Front View 2) Produkte Products Prü fbericht - Nr.: Test Report No. 50348466 001 Seite 38 von 42 Page 38 of 42 Photograph 3: Set-up for Spurious Emissions (Back View 1) Photograph 4: Set-up for Spurious Emissions (Back View 2) Produkte Products Prü fbericht - Nr.: Test Report No. 50348466 001 Seite 39 von 42 Page 39 of 42 Photograph 5: Set-up for Spurious Emissions (Back View 3) Photograph 6: Set-up for Spurious Emissions (Back View 4) Produkte Products Prü fbericht - Nr.: Test Report No. 50348466 001 Seite 40 von 42 Page 40 of 42 Photograph 7: Set-up for Conducted testing(View 1) Photograph 8: Set-up for Conducted testing(View 2) Produkte Products Prü fbericht - Nr.: Test Report No. 50348466 001 Seite 41 von 42 Page 41 of 42 Photograph 9: Set-up for AC Mains Conducted testing (Front View) Photograph 10: Set-up for AC Mains Conducted testing (Back View)