YJ7DCE042DCE042 Bluetooth Audit Chip

DCE042 Tool Connect™ Chip Wireless Certifications and Safety Information • This device is either CAN ICES-3(B)/NMB-3(B) or CAN ICES-5(B)/ NMB-5(B) compliant. • This device complies with Part 15 of the FCC Rules and Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna, 2) Increase the separation between the equipment and receiver, 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected or 4) Consult the dealer or an experienced radio/TV technician for help. • Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the device. • Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. • To comply with FCC and Industry Canada RF exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5mm in the United States and 10mm in Canada from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. For Bluetooth® Products • When traveling on airlines, be sure to comply with the airline restrictions on usage of personal electronic devices and Bluetooth®. • The out of range alert feature has been designed to act as an aid to warn against products getting misplaced or stolen. It is not a security system. • The connectivity range is up to 100 feet (30.5 meters) depending on environment and location. • The shortwave radio frequency signals of a Bluetooth® device may impair the operation of other electronic and medical devices (such as pacemakers or hearing aids). NOTE: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their respective owners. This product complies with these standards when operated with a 6 foot (1.8 meters) or shorter extension cord. DCE042 Puce Tool Connect MC Homologation du matériel sans fil et informations sécurité • Cet appareil est conforme à la norme CAN ICES-3(B)/NMB-3(B) ou CAN ICES-5(B)/NMB-5(B). • Cet appareil est conforme au paragraphe 15 du règlement du FCC et à la (aux) norme(s) RSS exempté(s) de licence d’Industrie Canada. Son utilisation est sujette aux deux conditions suivantes : 1) Ce dispositif ne doit pas causer d’interférences nuisibles; et 2) Ce dispositif doit accepter toute interférence reçue, y compris toute interférence pouvant causer un fonctionnement indésirable. Cet équipement a été testé et jugé conforme aux limites propres aux appareils numériques de Classe B, conformément au Paragraphe 15 du règlement du FCC. Ces limites sont destinées à offrir une protection raisonnable contre les interférences nuisibles d’une installation résidentielle. Cet équipement produit, utilise et peut émaner des ondes radiofréquences qui, s’il n’est pas installé et utilisé conformément aux directives, pourront causer des interférences nuisibles aux communications radio. Cependant, en fonction des installations réalisées, l’absence d’interférences n’est pas garantie. Si cet équipement cause des interférences nuisibles à la réception radio ou télévision (ce qui peut être déterminé par la mise sous/hors tension de cet équipement) l’utilisateur est encouragé à tenter de corriger ces interférences en prenant l’une ou plusieurs des mesures suivantes : 1) Réorienter l’antenne de réception ou en changer l’emplacement, 2) Augmenter la distance entre l’équipement et le récepteur, 3) Brancher l’équipement à une prise située sur un circuit différent de celui sur lequel le récepteur est connecté, ou 4) Contacter un revendeur ou consulter un technicien radio/télé qualifié. • Tout changement ou toute modification à l’appareil qui ne serait pas expressément approuvé par le fabricant pourra annuler les droits de l’utilisateur à employer cet équipement. • Conformément aux réglementions d’Industrie Canada, cet émetteur radio ne peut fonctionner qu’avec une antenne dont le type et le gain maximal (ou d’une valeur moindre) sont Stanley Black and Decker, 701 East Joppa Road, Towson, MD 21286 www.stanleyblackanddecker.com (NOV22) Part No. xxxx Copyright © 2022 homologués par Industrie Canada pour cet émetteur. Pour réduire toute interférence radio potentielle pouvant affecter les autres utilisateurs, le type d’antenne et ses gains devraient être choisis de façon à ce que la puissance isotrope rayonnée équivalente ne soit pas supérieure aux limites permettant la communication. • Afin de se conformer aux limites d’exposit…

Text truncated - open the document above for the full version.

 WARNING: For your own safety, read the tool instruction manual before using any accessory. Failure to heed these warnings may result in serious personal injury and damage to the tool and the accessory. When servicing this tool, use only identical replacement parts. English (original instructions) Fig. A WARNING: To reduce the risk of injury, read the instruction manual. AVERTISSEMENT : afin de réduire le risque de blessures, lire le mode d’emploi de l’outil. ADVERTENCIA: Para reducir el riesgo de lesiones, lea el manual de instrucciones. DCE042 Tool Connect™ Chip / Puce Tool Connect MC / Chip Tool Connect™ ENGLISH FRANÇAIS Tool Connect™ Chip (Fig. A)  WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start‑up can cause injury. Tool Connect™ chip 1 communicates with an optional application for your smart device (such as a smart phone or tablet) that connects the device to utilize the mobile application for inventory management functions. The Tool Connect™ chip is an Internet of Things device which is designed to be part of a connected asset management system. NOTE: Do not remove battery pull tab until instructed by mobile application. Tool Connect™ chip must be setup in the Tool Connect™ Site Manager application prior to installation. Tool Connect™ chip does not function until setup has been completed in the Site Manager application 1. Tool Connect™ Site Manager mobile application can be downloaded from: 2. Launch the Site Manager mobile application and follow instructions on adding a new Tool Connect™ new device. Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.  DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.  WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.  CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.  (Used without word) Indicates a safety related message. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. 4 3 2 LED Indicators to UserTool Connect™ Chip At Power Up1 Long Blink Pairing Complete2 Short Blinks Unpairing Successful2 Short Blinks Chip is Un‑paired1 Short Blink, Every 10 Seconds Identify (Commanded from App)Blinks On and Off for 10 seconds Installing the Tool Connect™ Chip 1. Remove the retaining T10 Torx screws 2 that hold the Tool Connect™ chip protective cover 3 into the tool. 2. Remove the protective cover and insert the Tool Connect™ chip into the empty pocket 4 . 3. Ensure that the Tool Connect™ chip is flush with the housing. Secure it with the retaining screws and tighten the screws to 0.3 Nm ±0.1 Nm. Do not overtighten. 1  AVERTISSEMENT : pour votre propre sécurité, lisez le guide d’utilisation de l’outil avant d’utiliser tout accessoire. Ne pas suivre ces avertissements peut entraîner une blessure corporelle grave ou endommager l’outil et l’accessoire. Lorsque vous réparez cet outil, utilisez seulement des pièces de remplacement identiques. Puce Tool Connect MC (Fig. A)  AVERTISSEMENT : afin de réduire le risque des blessures corporelles graves, éteignez l’outil et retirez le blocs‑piles avant d’effectuer tout réglage ou de retirer/installer des pièces ou des accessoires. Un démarrage accidentel peut causer des blessures. La puce Tool Connect MC 1 communique avec une application optionnelle pour votre appareil intelligent (comme un téléphone intelligent ou une tablette) qui connecte l’appareil afin d’utiliser l'application mobile pour des fonctions de gestion de l'inventaire. La puce Tool Connect MC est un dispositif Internet des objets conçue pour s’intégrer à un système de gestion d’inventaire connecté. REMARQUE : Ne retirez pas la languette d’ouverture de la pile avant d’y être invité par l’application mobile. La puce Tool Connect MC doit être configurée dans Tool Connect MC Site Manager avant installation. La puce Tool Connect™ ne fonctionne pas tant que la configuration n’est pas terminée dans l’application Site Manager 1. L’application mobile Tool Connect MC Site Manager peut être téléchargée depuis : 2. Lancez l’application mobile Site Manager et suivez les instructions pour ajouter un nouveau dispositif Tool Connect MC . Témoins lumineux destinés à l’utilisateur Puce Tool Connect MC À la mise sous tension1 Clignotement long Appariage terminé2 Clignotements courts Appariage réussi2 Clignotements courts Puce non appariée1 Clignotement court toutes les 10 secondes Identifier (commande depuis l’application)Clignote et s’éteint pendant 10 secondes Définitions : symboles et termes d'alarmes sécurité Ces guides d'utilisation utilisent les symboles et termes d'alarmes sécurité suivants pour vous prévenir de situations dangereuses et de risques de dommages corporels ou matériels.  DANGER : indique une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort ou des blessures graves.  AVERTISSEMENT : indique une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner la mort ou des blessures graves.  ATTENTION : indique une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner des blessures légères ou modérées.  (Si utilisé sans aucun terme) Indique un message propre à la sécurité. AVIS : indique une pratique ne posant aucun risque de dommages corporels mais qui par contre, si rien n’est fait pour l’éviter, pourrait poser des risques de dommages matériels. Chip Tool Connect™ (Fig. A)  ADVERTENCIA: Para reducir el riesgo de lesiones personales serias, apague la unidad y retire el paquete de batería antes de r…

Text truncated - open the document above for the full version.

Kirwan Magdamo Lead Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 Request for Confidentiality Date: August 16, 2022 Subject: Confidentiality Request for: YJ7DCE042 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☒ Short Term --------------------------- External Photos ☒ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☒ Permanent Schematics ☒ Short Term --------------------------- Test Setup Photos ☒ Short Term ☐ Permanent * 1 User’s Manual Stanley Black & Decker has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 2 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Short Term Confidentiality for Industry Canada Applications: Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: 3/15/2023. Sincerely, By: Kirwan Magdamo (Signature/Title 2 ) (Print name) 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Kirwan Magdamo Lead Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 F (410) 716 2961 Authority to Act as Agent Date: August 16, 2022 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Ryan Urness and Amanda Hauck of Laird Connectivity, LLC are authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: August 16, 2023 By: Kirwan Magdamo (Signature 1 ) (Print name) Title: Lead Project Engineer On behalf of: Stanley Black & Decker Telephone: 410-716-3563 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

EXTERNAL PHOTOS Company Name Stanley Black and Decker Model # DCE042 FCC ID # YJ7DCE042 IC # 9082A-DCE042 Page 1 of 2 EXTERNAL PHOTOS Company Name Stanley Black and Decker Model # DCE042 FCC ID # YJ7DCE042 IC # 9082A-DCE042 Page 2 of 2

INTERNAL PHOTOS Company Name Stanley Black and Decker Model # DCE042 FCC ID # YJ7DCE042 IC # 9082A-DCE042 Page 1 of 2 INTERNAL PHOTOS Company Name Stanley Black and Decker Model # DCE042 FCC ID # YJ7DCE042 IC # 9082A-DCE042 Page 2 of 2

Approval sheet Page 1 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 RFANT Series – RoHS Compliance MULTILAYER CERAMIC ANTENNA Halogens Free Product 2.4 GHz ISM Band RF Application P/N: RFANT3216120A5T *Contents in this sheet are subject to change without prior notice. No.7, South 4th Road, CIANJHEN DIST, Kaohsiung, 80681, Taiwan Approval sheet Page 2 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X1.2 mm 3 meet future miniaturization trend. 2. LTCC process 3. High stability in Temperature / Humidity Change APPLICATIONS 1. 2.4GHz ISM band RF applications 2.Bluetooth, Wireless, HomeRF CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.20 ± 0.20 W 1.60 ± 0.10 T 1.20 ± 0.10 A 0.25 ± 0.15 PINConnection 1Feeding 2 Identification Mark 3 Soldering terminal No.7, South 4th Road, CIANJHEN DIST, Kaohsiung, 80681, Taiwan Approval sheet Page 3 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 ELECTRICAL CHARACTERISTICS RFANT3216120A5T Specification Working Frequency Range 2450 ± 50 MHz Fc (GHz) 2.9 Gain (dBi) 2 (Typical) VSWR2 max. Series 1 6.8nH Matching component value Series 2 - Power Capacity 3 W max. Maximum Input Power 5 Watts for 5 minutes Operation Temperature -40 ̊C ~ +85 ̊C PolarizationLinear Azimuth Beamwidth Omni-directional * This frequency must be adjusted to 2.45GHz with matching circuit. SOLDER LAND PATTERN DESIGN Figure No.7, South 4th Road, CIANJHEN DIST, Kaohsiung, 80681, Taiwan Approval sheet Page 4 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 Antenna on Test Board ( Thickness 1.2mm) Antenna S11 on Test Boa rd Antenna VSWR on Test Board No.7, South 4th Road, CIANJHEN DIST, Kaohsiung, 80681, Taiwan Approval sheet Page 5 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFANT3216120A5T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board VerticalHo rizontal Y - Z Plane Average Gain= 0.948 dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain = 2.93dBi Average Gain = 0.60dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain= -5.60dBi Average Gain=-10.19dBi X - Z Plane Average Gain= -2.147 dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 127.0 Peak Gain= -4.98 dBi Average Gain= -9.68dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain= 1. 61 dBi Average Gain= -2.99 dBi X - Y Plane Average Gain= -2.810 dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain= -3.79 dBi Average Gain= -8.89dBi X Cut -40 -30 -20 -10 0 0 30 60 90 120 150 180 210 240 270 300 330 Peak Gain= 0. 77 dBi Average Gain= -4.04 dBi x Y Z x Y x Y Z X Z X Z Y Z Y No.7, South 4th Road, CIANJHEN DIST, Kaohsiung, 80681, Taiwan Approval sheet Page 6 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235  5C *Immersion time：2  0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260  5C *Leaching immersion time：30  0.5 sec Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：2705C *Immersion time：101 sec Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 Customer’s specification. *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temperature for 242 hours No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. No.7, South 4th Road, CIANJHEN DIST, Kaohsiung, 80681, Taiwan Approval sheet Page 7 of 9 ASC_RFANT3216120A5T_V09 Aug. 2018 Temperature cycle JIS C 0025 1.303 minutes at -40C3C, 2.10~15 minutes at room temperature, 3.303 minutes at +85C3C, 4.10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. High temperature JIS C 0021 *Temperature：85C2C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the d…

Text truncated - open the document above for the full version.

A Company: Stanley Black & Decker Page 1 of 13 Name: DCE042 Report: TR3600C Model: DCE042 Quote: NBO-01-2022-004577-2 Serial: Engineering Sample Test Report C-3600C Equipment Under Test: DCE042 Requirement(s): FCC 1.1310 ISED RSS-102 Test Date(s): 8/8/2022 Prepared for: Stanley Black & Decker Attn: Kirwan Magdamo 701 East Joppa Road Towson, MD 21286 Report Issued by: Anthony Smith, EMC Engineering Specialist Signature: Date: 10/21/2022 Report Reviewed by: Adam Alger, Laboratory Manager Signature: Date: 10/21/2022 Report Constructed by: Anthony Smith, EMC Engineering Specialist Signature: Date: 10/21/2022 This test report may not be reproduced, except in full, without approval of Laird Connectivity LLC Company: Stanley Black & Decker Page 2 of 13 Name: DCE042 Report: TR3600C Model: DCE042 Quote: NBO-01-2022-004577-2 Serial: Engineering Sample CONTENTS Contents ........................................................................................................................................................ 2 Laird Connectivity Test Services in Review ............................................................................................... 3 1 Test Report Summary ........................................................................................................................... 4 2 Client Information ................................................................................................................................. 5 2.1 Equipment Under Test (EUT) Information .................................................................................... 5 2.2 Product Description ...................................................................................................................... 5 2.3 Modifications Incorporated for Compliance ................................................................................. 5 2.4 Deviations and Exclusions from Test Specifications ..................................................................... 5 2.5 Additional Information .................................................................................................................. 5 3 References ............................................................................................................................................ 6 4 Uncertainty Summary ........................................................................................................................... 7 5 Test Data ............................................................................................................................................... 8 5.1 Antenna Port Conducted Emissions .............................................................................................. 8 6 FCC 1-G SAR Test Exclusion Calculations ............................................................................................ 11 6.1 Power Calculations ...................................................................................................................... 11 6.2 Distance ....................................................................................................................................... 11 6.3 SAR Test Exclusion Calculation .................................................................................................... 11 6.4 Result .......................................................................................................................................... 11 7 IC Exemption Calculation for Routine SAR Evaluation ........................................................................ 12 7.1 Power Calculations ...................................................................................................................... 12 7.2 Distance ....................................................................................................................................... 12 7.3 Exemption Limits ......................................................................................................................... 12 7.4 SAR Test Exclusion Calculation .................................................................................................... 12 7.5 Result .......................................................................................................................................... 12 8 Revision History .................................................................................................................................. 13 Company: Stanley Black & Decker Page 3 of 13 Name: DCE042 Report: TR3600C Model: DCE042 Quote: NBO-01-2022-004577-2 Serial: Engineering Sample Laird Connectivity Test Services in Review The Laird Connectivity LLC laboratory located at W66 N220 Commerce Court Cedarburg, Wisconsin, 53012 USA is recognized through the following organizations: A2LA – American Association for Laboratory Accreditation Accreditation based on ISO/IEC 17025:2017 with Electrical (EMC) Scope A2LA Certificate Number: 1255.01 Scope of accreditation includes all test methods listed herein unless otherwise noted Federal Communications Commission (FCC) – USA Accredited Test Firm Registration Number: 953492 Recognition of two 3 meter Semi-Anechoic Chambers Innovation, Science and Economic Development Canada Accredited U.S. Identification Number: US0218 Recognition of two 3 meter Semi-Anechoic Chambers Company: Stanley Black & Decker Page 4 of 13 Name: DCE042 Report: TR3600C Model: DCE042 Quote: NBO-01-2022-004577-2 Serial: Engineering Sample 1 TEST REPORT SUMMARY On 8/8/2022 the Equipment Under Test (EUT), DCE042, as provided by Stanley Black & Decker was tested to the following requirements: Portable Device Requirements Description Method Result FCC: 1.1310 Radiofrequency Radiation Exposure Limits Distance ≤ 5mm 1g-SAR Reported IC: RSS-102 Radiofrequency Radiation Exposure Limits Distance 10mm 1g-SAR Reported Notice: The results relate only to the item tested as configured and described in this report. Any additional conf…

Text truncated - open the document above for the full version.

A Company: Stanley Black & Decker Page 1 of 35 Name: DCE042 Report: TR3600A Model: DCE042 Quote: NBO-01-2022-004577-2 Serial: Engineering Sample Test Report C-3600A Equipment Under Test: DCE042 Requirement(s): FCC 15.247, RSS-247 Test Date(s): 8/8/2022-8/10/2022 Prepared for: Stanley Black & Decker Attn: Kirwan Magdamo 701 East Joppa Road Towson, MD 21286 Report Issued by: Anthony Smith, EMC Engineering Specialist Signature: Date: 01/04/2023 Report Reviewed by: Adam Alger, Laboratory Manager Signature: Date: 01/04/2023 Report Constructed by: Anthony Smith, EMC Engineering Specialist Signature: Date: 01/04/2023 This test report may not be reproduced, except in full, without approval of Laird Connectivity LLC Company: Stanley Black & Decker Page 2 of 35 Name: DCE042 Report: TR3600A Model: DCE042 Quote: NBO-01-2022-004577-2 Serial: Engineering Sample CONTENTS Contents ........................................................................................................................................................ 2 Laird Connectivity Test Services in Review .......................…

Text truncated - open the document above for the full version.