YJ7DCR010BBluetooth Speaker

Wireless Certifications and Safety Information • This device is either CAN ICES-3(B)/NMB-3(B) or CAN ICES- 5(B)/NMB-5(B) compliant. • This device complies with Part 15 of the FCC Rules and Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna, 2) Increase the separation between the equipment and receiver, 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected or 4) Consult the dealer or an experienced radio/TV technician for help. • Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the device. • Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. • To comply with FCC and Industry Canada RF exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. For Bluetooth® Products • When traveling on airlines, be sure to comply with the airline restrictions on usage of personal electronic devices and Bluetooth®. • The out of range alert feature has been designed to act as an aid to warn against products getting misplaced or stolen. It is not a security system. • The connectivity range is up to 100 feet (30.5 meters) depending on environment and location. • The shortwave radio frequency signals of a Bluetooth® device may impair the operation of other electronic and medical devices (such as pacemakers or hearing aids). NOTE: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their respective owners. This product complies with these standards when operated with a 6 foot (1.8 meters) or shorter extension cord. Homologation du matériel sans fil et informations sécurité • Cet appareil est conforme à la norme CAN ICES-3(B)/NMB- 3(B) ou CAN ICES-5(B)/NMB-5(B). • Cet appareil est conforme au paragraphe 15 du règlement du FCC et à la (aux) norme(s) RSS exempté(s) de licence d’Industrie Canada. Son utilisation est sujette aux deux conditions suivantes : 1) Ce dispositif ne doit pas causer d’interférences nuisibles; et 2) Ce dispositif doit accepter toute interférence reçue, y compris toute interférence pouvant causer un fonctionnement indésirable. Cet équipement a été testé et jugé conforme aux limites propres aux appareils numériques de Classe B, conformément au Paragraphe 15 du règlement du FCC. Ces limites sont destinées à offrir une protection raisonnable contre les interférences nuisibles d’une installation résidentielle. Cet équipement produit, utilise et peut émaner des ondes radiofréquences qui, s’il n’est pas installé et utilisé conformément aux directives, pourront causer des interférences nuisibles aux communications radio. Cependant, en fonction des installations réalisées, l’absence d’interférences n’est pas garantie. Si cet équipement cause des interférences nuisibles à la réception radio ou télévision (ce qui peut être déterminé par la mise sous/hors tension de cet équipement) l’utilisateur est encouragé à tenter de corriger ces interférences en prenant l’une ou plusieurs des mesures suivantes : 1) Réorienter l’antenne de réception ou en changer l’emplacement, 2) Augmenter la distance entre l’équipement et le récepteur, 3) Brancher l’équipement à une prise située sur un circuit différent de celui sur lequel le récepteur est connecté, ou 4) Contacter un revendeur ou consulter un technicien radio/télé qualifié. • Tout changement ou toute modification à l’appareil qui ne serait pas expressément approuvé par le fabricant pourra annuler les droits de l’utilisateur à employer cet équipement. Stanley Black and Decker, 701 East Joppa Road, Towson, MD 21286 www.stanleyblackanddecker.com (FEB19) Part No. N591662 Copyright © 2018, 2019 FINAL PAGE SIZE: 8.5" x 5.5" (half letter) • Conformément aux réglementions d’Industrie Canada, cet émetteur radio ne peut fonctionner qu’avec une antenne dont le type et le gain maximal (ou d’une valeur moindre) sont homologués par Industrie Canada pour cet émetteur. Pour réduire toute interférence radio potentielle pouvant affecter les autres utilisateurs, le type d’antenne et ses gains devraient être choisis de façon à ce que la puissance isotrope rayonnée équivalente ne soit pas supérieure aux limites permettant la communication. • Afin de se conformer aux limites d’exposition aux RF de FCC et Industrie Canada p…

Text truncated - open the document above for the full version.

If you have questions or comments, contact us. Pour toute question ou tout commentaire, nous contacter. Si tiene dudas o comentarios, contáctenos. 1-800-4-DeWALT Instruction Manual Guide D’utilisation Manual de instrucciones DCR010 12V/20V Max* Worksite Bluetooth® Speaker 12 V/20 V max* Haut-parleur Bluetooth® de lieu de travail Altavoz de Sitio de Trabajo Bluetooth® 12 V/20 V Max* final page size: 8.5 x 5.5 in English English (original instructions) 1 Français (traduction de la notice d’instructions originale) 10 Español (traducido de las instrucciones originales) 20 English 1 English (original instructions) Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.  DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.  WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.  CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.  (Used without word) Indicates a safety related message. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.  WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING: To reduce the risk of injury, read the instruction manual. if you have any questions or comments about this or any DeWALT tool, call us toll free at: 1-800-4- DeWALT (1-800-433-9258). 1 Power button 2 Volume buttons +/- 3 Track change buttons 4 Bluetooth®** status indicator 5 Play/Pause button 6 Bluetooth® button 7 Auxiliary port 8 USB port 9 Handle and mobile phone cradle 10 Cell phone tray Fig. A 7 8 2359 10 6 1 2 34 English 2 IMPORTANT SAFETY INSTRUCTIONS  WARNING: a ) Read these instructions. b ) Keep these instructions. c ) Heed all warnings. d ) Follow all instructions. e ) Do not use this apparatus near water. f ) Clean only with a dry cloth. g ) Do not block any ventilation openings. Use in accordance with the manufacturer’s instructions. h ) Do not use near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. i ) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. j ) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. k ) Only use attachments/accessories specified by the manufacturer. l ) Unplug this apparatus during lightning storms or when unused for long periods of time. m ) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n ) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. o ) Do not use under wet conditions or in presence of flammable liquids or gases. p ) Do not keep ears close to this appliance. Safety Instructions for Speakers • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Do not abuse cord. Never carry the speaker by its cord. Never pull the cord to disconnect from the socket. Keep the cord away from heat, oil and sharp edges. • Remove the battery pack. Switch off before leaving it unattended. Remove the battery pack when not in use, before changing accessories or attachments and before servicing. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • No exposed flame sources, such as lighted candles, should be placed on the speaker. • To reduce the risk of hearing damage, do not place ears too close to the speaker. • Mains plug is used as the disconnect device; the disconnect device (plug) shall remain readily operable. • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is, 16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The lower the gauge number, the heavier the cord. Minimum gauge for Cord sets Volts Total length of Cord in Feet (meters) 120 V25 (7.6)50 (15.2)100 (30.5)150 (45.7) 240 V50 (15.2)100 (30.5)200 (61.0)300 (91.4) Ampere Rating American Wire gauge More Than not More Than 0618161614 61018161412 101216161412 12161412Not Recommended The label on this unit may include the following symbols. The symbols and their definitions are as follows: V ......................... volts Hz .......................hertz min .....................minutes or DC …

Text truncated - open the document above for the full version.

Kirwan Magdamo Lead Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 U.S. Agent Designation for Service of Process TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant Company name: Stanley Black & Decker FRN #: 0019980119 Grantee Code: YJ7 Contact Name: Kirwan Magdamo Street Address: 701 East Joppa Road City/Province/Zip: Towson, MD 21286 Telephone No: 410-716-3563 Email: [email protected] Applicant Signature 1 : Date: August 9, 2023 Signed by (Printed Name/Title): Kirwan Magdamo, Lead Project Engineer, Stanley Black & Decker 1 - Letters must be placed on appropriate letterhead. The signee for the applicant must be one of the following: Applicant (grantee) contact of record in the FCC’s authorization system, or authorized officers or employee of the applicant (grantee).

Kirwan Magdamo Lead Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 Certification Application Attestation Statements Date: August 16, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Stanley Black & Decker certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) _Stanley Black & Decker (“the applicant”) certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Thank you, By: Kirwan Magdamo (Signature 2 ) (Print name) 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters must be placed on appropriate letterhead. Title: Lead Project Engineer Company: Stanley Black & Decker Telephone: 410-716-3563

Kirwan Magdamo Lead Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 Authority to Act as Agent Date: August 16, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Kimberly Colbert is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: April 8, 2024 By: Kirwan Magdamo (Signature 1 ) (Print name) Title: Lead Project Engineer 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. On behalf of: Stanley Black & Decker (Company Name) Telephone: 410-716-3563

Kirwan Magdamo Lead Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 Request for Confidentiality Date: August 16, 2023 Subject: Confidentiality Request for: YJ7DCR010B and 9082A-DCR010B Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term --------------------------- External Photos ☐ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term --------------------------- Test Setup Photos ☐ Short Term ☐ Permanent * 1 User’s Manual Stanley Black & Decker has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __ (specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. Short Term Confidentiality for Industry Canada Applications: Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: (specify ISED expiration date / date of marketing) . Sincerely, By: Kirwan Magdamo (Signature/Title 3 ) (Print name) 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

DCR010, Bluetooth Speaker DCR010, whole view, net weight approx. 2000g DCR010, front view DCR010, back view (with name plate & FCC/IC label) DCR010, top view Bottom view DCR010, left view DCR010, right view Right view, with an AUDIO IN jack (φ3.5 mm stereo mini jack) and a USB type-A connector (for output charging only).

B B FN2D N607317 / N640365 –Proposed label change for DCR010 BT module update 2023

Label Location ONLY (Not correct ID’s used)

DCR010 Bluetooth Speaker without shield around the antenna

MPE TEST REPORT for the STANLEY BLACK & DECKER, INC FCC ID: YJ7DCR010B IC ID: 9082A-DCR010B WLL REPORT# 18285-01 REV 0 Prepared for: Stanley Black & Decker, Inc 701 East Joppa Road Towson, Maryland 21286 Prepared By: Washington Laboratories, Ltd. 4840 Winchester Boulevard. Suite #5. Frederick, Maryland 21703 Testing Certificate AT-1448 Certificates and reports shall not be reproduced except in full, without the written permission of Washington Laboratories, Ltd Stanley Black & Decker, Inc BT Speaker: DCR010 MPE Test Report WLL Report 18285-01 Rev 0 Page-2 of 13 MPE Test Report for the Stanley Black & Decker, Inc BT Speaker: DCR010 FCC ID: YJ7DCR010B ISED ID: 9082A-DCR010B August 14, 2023 WLL Report# 18285-01 Rev 0 Prepared by: ___________________________ Ryan Mascaro RF Test Engineer Reviewed by: ____________________________ Samuel Violette Vice President Stanley Black & Decker, Inc BT Speaker: DCR010 MPE Test Report WLL Report 18285-01 Rev 0 Page-3 of 13 Abstract This report has been prepared on behalf of Stanley Black & Decker, Inc to document the findings of the maximum permissible exposure evaluation on the Stanley Black & Decker, Inc BT Speaker: DCR010. The information provided on this report is only applicable to device herein documented. The purpose of this evaluation is to establish a minimum safe distance as per the RF exposure requirements as defined in FCC §1.1307 & §1.1310 and in RSS-102. This report documents the results of testing to the requirements of: • CFR Title 47 Volume 1 Practice and Procedure; (1.1307) Environmental Assessments • RSS-102 Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) This evaluation was performed by Washington Laboratories, Ltd, 4840 Winchester Blvd., Suite 5, Frederick, MD 21703. Washington Laboratories, Ltd. has been accepted as an EMC Conformity Assessment Body (CAB) under the United States/European Union Memorandum of Agreement. Washington Laboratories, Ltd. has been accepted by the FCC and approved by ANAB under Testing Certificate AT-1448 as an independent FCC test laboratory. Revision History Description of Change Date Rev 0 Initial Release August 14, 2023 Rev 1 Update Antenna Gain from .76 to .45 dBi November 8, 2023 Stanley Black & Decker, Inc BT Speaker: DCR010 MPE Test Report WLL Report 18285-01 Rev 0 Page-4 of 13 Table of Contents Abstract ...................................................................................................................................................... iii Table of Contents ....................................................................................................................................... iv List of Tables ............................................................................................................................................. iv 1 Introduction ......................................................................................................................................5 2 Requirements ...................................................................................................................................6 Transmitter Categories ................................................................................................................ 6 2.1.1 Fixed Installations ................................................................................................................... 6 2.1.2 Mobile Devices ....................................................................................................................... 6 2.1.3 Portable Devices ..................................................................................................................... 6 Exposure Categories ................................................................................................................... 7 2.2.1 Occupational/Controlled Exposure ......................................................................................... 7 2.2.2 General Population/Uncontrolled Exposure ........................................................................... 7 3 Device Summary ............................................................................................................................10 4 Radio Frequency Radiation Exposure Evaluation .........................................................................11 List of Tables Table 1: MPE Limits – FCC ....................................................................................................................... 8 Table 2: MPE Limits – ISED ...................................................................................................................... 9 Table 3: Device Summary – BT Speaker: DCR010 ................................................................................. 10 Table 4: Transmitter MPE Calculation Summary (FCC) ......................................................................... 12 Table 5: Transmitter MPE Calculation Summary (ISED) ........................................................................ 13 Stanley Black & Decker, Inc BT Speaker: DCR010 MPE Test Report WLL Report 18285-01 Rev 0 Page-5 of 13 1 Introduction This report has been prepared on behalf of Stanley Black & Decker, Inc for the BT Speaker: DCR010 (FCC ID: YJ7DCR010B) to show compliance with the RF exposure requirements as defined in FCC §1.1307 & §1.1310 and in RSS-102. The testing in-support of this evaluation was performed at Washington Laboratories, Ltd, 4840 Winchester Blvd., Frederick, MD 21703. Washington Laboratories, Ltd. has been accepted as an EMC Conformity Assessment Body (CAB) under the United States/European Union Memorandum of Agreement. Washington Laboratories, Ltd. is accredited with ANAB under Testing Certificate AT-1448. Stanley Black & Decker, Inc BT Speaker: DCR010 MPE Test Report WLL Report 18285-01 Rev 0 Page-6 of 13 2 Requirements Transmitter Categories 2.1.1 Fixed Installations A fixed location means that the device,…

Text truncated - open the document above for the full version.

ANTENNA TEST REPORT for the DCR010 BLUETOOTH ANTENNA WLL REPORT# 18407-01 REV 0 Prepared for: Stanley Black & Decker, Inc. 701 E. Joppa Road - TW116 Towson, Maryland 21286 Prepared By: Washington Laboratories, Ltd. 4840 Winchester Boulevard Frederick, Maryland 21703 Certificates and reports shall not be reproduced except in full, without the written permission of Washington Laboratories, Ltd Stanley Black & Decker, Inc. DCR010 Bluetooth Antenna Antenna Test Report WLL Report 18407-01 Rev 0 Page-2 of 23 Antenna Test Report for the Stanley Black & Decker, Inc. DCR010 Bluetooth Antenna WLL Report# 18407-01 Rev 0 November 6, 2023 Prepared by: ___________________________ Sam Violette VP/Compliance Engineer Reviewed by: ____________________________ Steven D. Koster President Stanley Black & Decker, Inc. DCR010 Bluetooth Antenna Antenna Test Report WLL Report 18407-01 Rev 0 Page-3 of 23 Abstract This report has been prepared on behalf of Stanley Black & Decker, Inc. to document the testing/design of the DCR010 Bluetooth Antenna. The information provided within this report is only applicable to the device herein documented as the EUT. Testing was performed in the Free-space Anechoic Chamber Test-site (FACT) 3m chamber of Washington Laboratories, Ltd, located at 4840 Winchester Boulevard, Frederick, MD 21703. Revision History Description of Change Date Rev 0 Initial Release November 6, 2023 Stanley Black & Decker, Inc. DCR010 Bluetooth Antenna Antenna Test Report WLL Report 18407-01 Rev 0 Page-4 of 23 Table of Contents 1 Introduction ..................................................................................................................................... 6 1.1 Test Scope ................................................................................................................................... 6 1.2 Contract Information ................................................................................................................... 6 1.3 Test and Support Personnel ........................................................................................................ 6 1.4 Test Location .............................................................................................................................. 7 2 Equipment Under Test .................................................................................................................... 8 2.1 EUT Identification & Description .............................................................................................. 8 2.2 Test Configuration .................................................................................................................... 13 2.2.1 Test Equipment ..................................................................................................................... 14 3 Test Results ................................................................................................................................... 15 3.1 Antenna Pattern ......................................................................................................................... 15 3.1.1 Test Procedure ...................................................................................................................... 15 3.1.2 Radiated Data Reduction and Reporting ............................................................................... 17 3.1.3 Test Data ............................................................................................................................... 18 Stanley Black & Decker, Inc. DCR010 Bluetooth Antenna Antenna Test Report WLL Report 18407-01 Rev 0 Page-5 of 23 List of Tables Table 2: Device Summary ...........................…

Text truncated - open the document above for the full version.