YJ7TLCKMAJDTLCKMAJD Module

Purpose This document describes the installation process of the TLCKMAJD Module in Stanley Black & Decker battery packs. NOTICE: Installation of this module may only be made by qualified Stanley Black & Decker Installer. This is not a field upgrade, and must be done at the Stanley Black & Decker factory. The user manual for the end product must include the following information in a prominent location (including English and French for Canada): To comply with FCC and Industry Canada RF radiation exposure limits for general population, the antenna used for this device must not be co-located or operating in conjunction with any other antenna or transmitter. Pour se conformer à la FCC et d'Industrie Canada limites d'exposition aux rayonnements RF pour la population générale, l'antenne utilisée pour cet appareil ne doit pas être co- localisées ou opérant en conjonction avec une autre antenne ou un autre émetteur. FCC Notice FCC ID: YJ7TLCKMAJD Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Interference Statement (Part 15.105 (b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This portable transmitter with its antenna complies with FCC and Industry Canada RF exposure limits for general population / uncontrolled exposure Cet émetteur portable avec son antenne est conforme aux limites d'exposition aux RF de la FCC et d'Industrie Canada pour la population générale / exposition non contrôlée Industry Canada Notice IC: 9082A-TLCKMAJD Section 7.1.2 of RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Section 7.1.3 of RSS-GEN This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Section 7.1.2 du CNR-GEN En vertu de la réglementation de l'industrie du Canada, cet émetteur de radio ne peut fonctionner à l'aide d'une antenne de un type et un maximum (ou moins) Gain approuvé pour l'émetteur par Industrie Canada. A réduire les interférences radio potentielles aux autres utilisateurs, le type d'antenne et son gain doivent être si choisi que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Section 7.1.3 du CNR-GEN Cet appareil est conforme norme Industrie Canada RSS exempts de licence (s). Son fonctionnement est soumis aux deux conditions suivantes: 1) cet appareil ne doit pas provoquer d'interférences, et 2) cet appareil doit accepter toute interférence, y compris les interférences pouvant provoquer un fonctionnement indésirable du dispositif. Installation Instructions: 1) Make sure the correct module is selected to match the capacity of the battery pack. 2) Place the module in the fixture and use the slider to bend the thermistor lead. 3) Mount the module assembly in the battery pack bracket. Make sure the three wires are routed properly for the SOC PCA. 4) Place the manual soldering fixture over the battery pack. 5) Solder B+ and B- leads to cell terminal tabs and the four cell tap locations to the module PCA. 6) Inspect all solder locations. 7) Place mica insulator over B- lead on the module PCA.

Kirwan Magdamo Sr. Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 F (410) 716 2961 Request for Confidentiality Date: May 4, 2015 Co nfidentiality Request for: FCC ID: YJ7TLCKMAJD IC ID: 9082A-TLCKMAJD To Whom It May Concern, Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 6.4, the applicant requests that a part o f the subject FCC and/or IC application be held confidential. The applicant requests the exhibits listed below be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Block Diagram Schematics Op eration Description/Theory of Operation Applicant has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Sincerely, (Signature) Name: Kirwan Magdamo Title: Sr. Project Engineer Phone: 410-716-3563 Email: [email protected]

Kirwan Magdamo Sr. Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 F (410) 716 2961 Authority to Act as Agent Date: February 18, 2015 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Thomas T. Smith, Ryan Urness and Amanda Hauck of LS Research, LLC are authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. The term of this Agency Agreement shall start on the above date of this Agreement and shall continue in force until one (1) year thereafter. Thank you, By: __________________________ Kirwan Magdamo (Signature) (Print name) Title: Sr. Project Engineer On behalf of: Stanley Black & Decker (Company Name) Telephone: 410-716-3563

LS Research, LLC | W66 N220 Commerce Court | Cedarburg WI 53012 O: 262.375.4400 | F: 262.375.4248 | www.lsr.com May 20, 2015 RE: ACB Application ATCB017437 To Whom It May Concern: This letter is to help clarify the intent of this limited modular filing to the ACB reviewer. This application is being submitted under two company names, which are both divisions of a larger company. The module itself and test report are exactly the same for both companies. Please note the FCC and IC ID numbers that have been requested: FCC Application: Company Name: Stanley Black & Decker. Model: TLCKMAJD FCC ID: YJ7TLCKMAJD IC Application: Company Name: Stanley Black & Decker Canada Corp. Model: TLCKMAJD IC: 9082A-TLCKMAJD Please let us know if you need further clarification. Regards,

Kirwan Magdamo Sr. Project Engineer 701 East Joppa Road, Towson, MD 21286 T (410) 716 3563 F (410) 716 2961 Re: Limited Modular Transmitter Approval FCC ID: YJ7TLCKMAJD To Whom It May Concern, The following information is being provided per the requirements of 15.212 regarding modular approval of Part 15 devices. This transceiver is a complete RF module with an integral reference oscillator. External connections are provided for power and data communication. The following numbered items correspond to similarly numbered paragraphs in 15.212. Each item is a response to the requirements of that document. 1) The module does not contain integral RF shielding. Stanley Black & Decker will maintain control of the installation and distribution of this module for its own products and modules will not be sold separately. 2) All inputs are processed as data by the on-board microcontroller. The outside user has no direct control of transmit modulation. 3) There is a 3.3V voltage regulator on board that powers the radio transceiver. 4) An integral PCB – trace antenna is used with this module. This is in accordance with Part 15.203. 5) The module was tested in a host configuration and found to be compliant with Part 15 regulations. 6) An FCC ID label is affixed to each unit at the time of manufacture. Information is also clearly presented in the user guide about labeling requirements for the final assembly. 7) This unit is compliant with Part 15.247. Installation and other requirements are presented in the user guide to allow the unit to be correctly installed. 8) The unit is compliant with the RF exposure requirements of Parts 15.247 and 2.1091. Further information may be obtained from Stanley Black & Decker. Sincerely, Kirwan Magdamo 701 East Joppa Road Towson, MD 21286 410-716-3563 [email protected]

PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 1 of 3 Back side of module Back side of module PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 2 of 3 PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 3 of 3

HOST PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 1 of 2 HOST PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 2 of 2

PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 1 of 3 Back side of module Back side of module PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 2 of 3 PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 3 of 3

W66 N220 Commerce Court ● Cedarburg, WI 53012 USA ● Phone: 262.375.4400 ● Fax: 262.375.4248 ● www.lsr.com Prepared For: Stanley Black and Decker Name: TLCKMAJD Report: RF314278 B FCC RF Model: TLCKMAJD LSR: C-2060 Serial: CL14A14502210 Page 1 of 9 i. Title Page ENGINEERING TEST REPORT # 314278 B LSR Job #: C-2060 Compliance Testing of: TLCKMAJD Test Date(s) February 6 th and 26 th , March 31 st , 2015 Prepared For: Stanley Black and Decker Attn: Kirwan Magdamo 701 E. Joppa Road Towson, MD 21286 Stanley Black and Decker Canada Attn: Mark Emmerson 6275 Millcreek Drive Mississauga, Ontario L5N7K6 This Test Report is issued under the Authority of: Shane D. Rismeyer, EMC Engineer Signature: Date: 4/13/15 This Test Report may not be reproduced, except in full, without written approval of LS Research, LLC. Prepared For: Stanley Black and Decker Name: TLCKMAJD Report: RF314278 B FCC RF Model: TLCKMAJD LSR: C-2060 Serial: CL14A14502210 Page 2 of 9 ii. Table of Contents Table of Contents i. Title Page ................................................................................................................................... 1 ii. Table of Contents ....................................................................................................................... 2 iii. LS Research, LLC ...................................................................................................................... 3 1.0 Conformance Summary ............................................................................................................. 4 2.0 SAR Test Exclusion Threshold .................................................................................................. 4 3.0 Client Information ...................................................................................................................... 5 3.1 Equipment Under Test (EUT) Information ................................................................................ 5 3.2 Product Description ................................................................................................................... 5 3.3 Modifications Incorporated In the EUT for Compliance Purposes ........................................... 5 3.4 Deviations & Exclusions from Test Specifications ................................................................... 5 3.5 Additional Information .............................................................................................................. 5 4.0 RF Conducted Measurement Data ............................................................................................. 6 5.0 SAR Test Exclusion Calculation ............................................................................................... 6 6.0 MPE Calculation ........................................................................................................................ 8 Prepared For: Stanley Black and Decker Name: TLCKMAJD Report: RF314278 B FCC RF Model: TLCKMAJD LSR: C-2060 Serial: CL14A14502210 Page 3 of 9 iii. LS Research, LLC LSR, LLC in Review As an EMC Testing Laboratory, our Accreditation and Assessments are recognized through the following: A2LA – American Association for Laboratory Accreditation Accreditation based on ISO/IEC 17025: 2005 with Electrical (EMC) Scope of Accreditation A2LA Certificate Number: 1255.01 Federal Communications Commission (FCC) – USA Listing of 3 Meter Semi-Anechoic Chamber based on Title 47 CFR – Part 2.948 FCC Registration Number: 90756 Industry Canada On file, 3 Meter Semi-Anechoic Chamber based on RSS-212 – Issue 1 File Number: IC 3088-A On file, 3 and 10 Meter OATS based on RSS-212 – Issue 1 File Number: IC 3088 U. S. Conformity Assessment Body (CAB) Validation Validated by the European Commission as a U. S. Competent Body operating under the U. S./EU, Mutual Recognition Agreement (MRA) operating under the European Union Electromagnetic Compatibility –Council Directive 2004/108/EC (formerly 89/336/EEC, Article 10.2). Date of Validation: January 16, 2001 Validated by the European Commission as a U.S. Notified Body operating under the U.S. /EU, Mutual Recognition Agreement (MRA) operating under the European Union Telecommunication Equipment – Council Directive 99/5/EC, Annex V. Date of Validation: November 20, 2002 Notified Body Identification Number: 1243 Prepared For: Stanley Black and Decker Name: TLCKMAJD Report: RF314278 B FCC RF Model: TLCKMAJD LSR: C-2060 Serial: CL14A14502210 Page 4 of 9 1.0 Conformance Summary The EUT was found to MEET the 5mm minimum test separation distance threshold for SAR test exclusion per FCC §2.1091(mobile) using methods of FCC KDB 447498 D01 General RF Exposure Guidance v05r02 as a standalone device. 2.0 SAR Test Exclusion Threshold SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 20 cm 1-g SAR test exclusion threshold equation: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] * [√f(GHz)] ≤ 3.0 10-g SAR test exclusion threshold equation: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] * [√f(GHz)] ≤ 7.5 Prepared For: Stanley Black and Decker Name: TLCKMAJD Report: RF314278 B FCC RF Model: TLCKMAJD LSR: C-2060 Serial: CL14A14502210 Page 5 of 9 3.0 Client Information Manufacturer Name: Stanley Black and Decker Address: 701 E. Joppa Road Contact Person: Kirwan Magdamo Manufacturer Name: Stanley Black and Decker Canada Address: 6275 Millcreek Drive Contact Person: Mark Emmerson 3.1 Equipment Under Test (EUT) Information The following information has been supplied by the applicant. Product Name: TLCKMAJD Model Number: TLCKMAJD Serial Number: CL14A14502210 FCC ID YJ7TLCKMAJD 3.2 Product Description The TLCKMAJD is capable of connecting with mobile devices that support Bluetooth Smart technology. 3.3 Modifications Incorporated In the EUT for Compliance Purposes None noted at time of test 3.4 Deviations & Exclusions from Test S…

Text truncated - open the document above for the full version.

W66 N220 Commerce Court ● Cedarburg, WI 53012 Phone: 262.375.4400 ● Fax: 262.375.4248 www.lsr.com ENGINEERING TEST REPORT # 314278 LSR Job #: C-2060 Compliance Testing of: TLCKMAJD Test Date(s) February 6 th and 26 th , March 31 st , 2015 Prepared For: Stanley Black and Decker Attn: Kirwan Magdamo 701 E. Joppa Road Towson, MD 21286 Stanley Black and Decker Canada Attn: Mark Emmerson 6275 Millcreek Drive Mississauga, Ontario L5N7K6 This Test Report is issued under the Authority of: Shane D. Rismeyer, EMC Engineer Signature: Date: 4/16/15 Test Report Reviewed by: Peter Feilen, EMC Engineer Signature: Date: 4/15/15 Report by: Shane D. Rismeyer, EMC Engineer Signature: Date: 4/14/15 This Test Report may not be reproduced, except in full, without written approval of LS Research, LLC. LS Research, LLC Page 2 of 31 Prepared For: Stanley Black and Decker Model Number: TLCKMAJD Report #: 314278 EUT: TLCKMAJD Serial Number: CL14A14502210 LSR Job #: C-2060 Table of Contents 1.0 Summary of Test Report ............................................................................................................ 4 2.0 Test Facilities ............................................................................................................................. 4 3.0 Client Information ...................................................................................................................... 5 3.1 Equipment Under Test (EUT) Information ................................................................................ 5 3.2 Product Description ................................................................................................................... 5 3.3 Modifications Incorporated In the EUT for Compliance Purposes ........................................... 5 3.4 Deviations & Exclusions from Test Specifications ................................................................... 5 3.5 Additional Information .............................................................................................................. 5 4.0 Conditions of Test ...................................................................................................................... 6 5.0 Test Equipment .......................................................................................................................... 6 6.0 Conformance Summary ............................................................................................................. 6 Appendix A – Test Equipment ............................................................................................................. 7 Appendix B – Test Data ........................................................................................................................ 8 B.1 – RF Conducted Emissions ........................................................................................................ 8 B.2 – Radiated Emissions ............................................................................................................... 15 B.3 – Frequency Stability ............................................................................................................... 26 B.4 – AC Mains Conducted Emissions .......................................................................................... 27 Appendix C - Uncertainty Summary .................................................................................................. 30 Appendix D - References .................................................................................................................... 31 LS Research, LLC Page 3 of 31 Prepared For: Stanley Black and Decker Model Number: TLCKMAJD Report #: 314278 EUT: TLCKMAJD Serial Number: CL14A14502210 LSR Job #: C-2060 LS Research, LLC in Review As an EMC Testing Laboratory, our Accreditation and Assessments are recognized through the following: A2LA – American Association for Laboratory Accreditation Accreditation based on ISO/IEC 17025: 2005 with Electrical (EMC) Scope of Accreditation A2LA Certificate Number: 1255.01 Federal Communications Commission (FCC) – USA Listing of 3 Meter Semi-Anechoic Chamber based on Title 47 CFR – Part 2.948 FCC Registration Number: 90756 Industry Canada On file, 3 Meter Semi-Anechoic Chamber based on RSS-212 – Issue 1 File Number: IC 3088-A On file, 3 and 10 Meter OATS based on RSS-212 – Issue 1 File Number: IC 3088 U. S. Conformity Assessment Body (CAB) Validation Validated by the European Commission as a U. S. Competent Body operating under the U. S./EU, Mutual Recognition Agreement (MRA) operating under the European Union Electromagnetic Compatibility –Council Directive 2004/108/EC (formerly 89/336/EEC, Article 10.2). Date of Validation: January 16, 2001 Validated by the European Commission as a U.S. Notified Body operating under the U.S. /EU, Mutual Recognition Agreement (MRA) operating under the European Union Telecommunication Equipment – Council Directive 99/5/EC, Annex V. Date of Validation: November 20, 2002 LS Research, LLC Page 4 of 31 Prepared For: Stanley Black and Decker Model Number: TLCKMAJD Report #: 314278 EUT: TLCKMAJD Serial Number: CL14A14502210 LSR Job #: C-2060 Notified Body Identification Number: 1243 1.0 Summary of Test Report In February- March 2015 the EUT, TLCKMAJD, was tested and MEETS the following requirements: FCC and IC Paragraph Test Requirements Compliance (Yes/No) FCC:15.247 (a)(2) IC: RSS 210 A8.2 (a) 6 dB Bandwidth of a Digital Modulation System Yes FCC : 15.247(b) & 1.1310 IC : RSS 210 A8.4 Maximum Output Power Yes FCC:15.247 (d) IC: RSS 210 A8.2 (b) Power Spectral Density of a Digital Modulation System Yes FCC :15.247(d) IC : RSS 210 A8.5 RF Conducted Spurious Emissions at the Transmitter Antenna Terminal Yes FCC : 15.247(c), 15.209 & 15.205 IC : RSS 210 A8.2(b), section 2.2, 2.6 and 2.7 Transmitter Radiated Emissions Yes FCC : 15.109 IC : RSS GEN Receive Mode (Digital Device) Radiated Emissions Yes FCC : 2.1055 (d) Frequency Stability Yes 2.0 Test…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 1 of 2 TEST SETUP PHOTOS Model # TLCKMAJD FCC ID # YJ7TLCKMAJD IC # 9082A‐TLCKMAJD Page 2 of 2