YW2ZMAP9701KBBLUETOOTH KEYBOARD

Provide Protection, Bluetooth Keyboard, and integrated Stand for tablet device Storage and Protection It attaches to the front of the tablet device by inserting the tablet face first into the opening of the tray. The tablet device is safely held into position, and protected, by using a shock absorbing, friction fitting around the inside edges of the product. Use To utilize the stand and keyboard function of the product, you remove the tablet device by gently prying the tablet out of the case. You then lift up the hinge and lock it in place by choosing your desired angle and sliding the tabs down into the proper slots and pushing back to lock hinge in place. Then, simply place tablet device (either in portrait or landscape mode) into the opening, running from end to end, and rest it against the raised hinge. Bluetooth Keyboard Pairing To utilize the Bluetooth keyboard, you must pair it to the tablet. We will demonstrate this process using an iPad, however, it will be similar for all tablet devices. The pairing process is as follows: 1. On the tablet, click on Settings icon on desktop 2. On tablet, Click General 3. On tablet, Click Bluetooth 4. On the product, slide the power button to on 5. On product, Click on pair 6. The tablet will display a code 7. Type the code on the keyboard and press enter 8. Your product is now paired to your tablet device FCC NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

1234 A B C D 4 321 D C B A BCM2042 EEPROM 24 MHz Keymartix Led indicator Low battery Monitor Power supply PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

External Photo for model: ZMAP9701KB External Photo for model: ZMAP9701KB External Photo for model: ZMAP9701KB

FCC ID LABEL FCC ID: YW2ZMAP9701KB This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received,including interference that may cause undesired operation. Label Location on EUT EUT Bottom View/ FCC ID Label Location

Internal Photo for model: ZMAP9701KB Internal Photo for model: ZMAP9701KB Internal Photo for model: ZMAP9701KB Internal Photo for model: ZMAP9701KB Antenna Internal Photo for model: ZMAP9701KB

Operational Description for Bluetooth Keyboard Keyboard:(1)Once a key or multi keys of keyboard are pressed or released,the signal change will be detected by MCU. (2)The MCU converts these signals into HID data packet. (3)The MCU send HID data packet to Bluetooth Module via uart interface. (4)The BT module transmits the modulation signal on frequency of 2.4GHz using FHSS modulation.

55 44 33 22 11 D D C C B B A A TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88 --- cover page 14 TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88 --- cover page 14 TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88 --- cover page 14 Broadcom Proprietary & Confidential REVISION HISTORYRevision 0000-P2 -- EEPROM for BCM2042A1 set switcher VDDA output to 1.85v, and using VDDA for on chip LDO inputRevision 0020-P1 -- Put additional resistor R22 to avoid Xtal startup issueRevision 0020-P2 -- update the components value on "pi" low pass filter for 2nd and 3rd harmonic reduction 115056-0020 55 44 33 22 11 D D C C B B A A VBATT 3P0V 1P5VC 3P0V_1 1P8V_1 VBATT 3P0V VBATT 3P0V 3P0V 3P0V P0_3P1_5P1_3 P4_4 P0_1P0_4P1_6 SDA P0_2P3_0 P4_5 P0_5P2_7P1_7 P4_2 P0_6 SCL P2_0UP_TX P4_0 P0_7P2_5P2_1P3_5P3_2P2_2UP_RXP1_0P3_1P3_3P2_6P1_1 P4_1 P3_4P1_4P1_2 P4_3 P0_0P2_3P2_4 SCLSDA RESET_N TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88 --- BASEBAND 24 TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88 --- BASEBAND 24 TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88 --- BASEBAND 24 Broadcom Proprietary & Confidential Note: The switching regulator isconfigured for 2 battery cells inserial. 115056-0020 L1 4_7uH L1 4_7uH C121uFC121uF R20 681K R20 681K C14_7uFC14_7uF U5A BCM2042_88 PIN_1 U5A BCM2042_88 PIN_1 UP_TX J10 UP_RX J9 VDD_IO D7 GND F7 GND J8 GND F6 VDD_CORE J4 GND E6 RESET_n H8 P1_0 F4 P1_1 E4 P1_2 A4 P1_3 A5 P1_4 B4 P1_5 E8 P1_6 D8 P1_7 C6 P2_0 B5 P2_1 C5 P2_2 D9 P2_3 E9 P2_4 D10 P2_5 F8 P2_6 G5 P2_7 G6 P3_0 F9 P3_1 E10 P3_2 A6 P0_0 F10 P0_1 G7 P0_2 G8 P0_3 H7 P0_4 G9 P0_5 G10 P0_6 H9 P0_7 H10 SDA H6 P3_3 B6 P3_4 A7 P3_5 B7 SCL H5 VDD_IO D6 GND D4 GND H4 P4_0 E5 P4_1 D5 P4_2 F5 P4_3 C3 P4_4 D3 P4_5 E3 TMC B3 VDD_IO E7 VDD_CORE J7 VDD_CORE C4 R18 499K R18 499K R1510kR1510k M24C128 U6 M24C128 U6 E0 1 VSS 4 E2 3 SDA 5 VCC 8 E1 2 WP 7 SCL 6 R1610kR1610k L2 10uH L2 10uH R17976KR17976K C110_1uFC110_1uF C13220pFC13220pF C510_1uFC510_1uF U5C BCM2042_88 PIN_1 U5C BCM2042_88 PIN_1 BAT1 A9 BAT2 C8 BATOUT B9 SW1_LO A10 SW2_LO C10 SW1_HI C9 FB1 B8 SW2_HI A8 FB2 C7 SWGND B10 C4 10uF C4 10uF C3 10uF C3 10uF R211MR211M C14220pFC14220pF 55 44 33 22 11 D D C C B B A A 1P5VC 1P5VA 1P5VA 1P5VA 1P5VREG1 1P5VC 1P8V_1 TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88--- RF 34 TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88--- RF 34 TitleSize Document Number Rev Date: Sheet of P1 Monday, May 08, 2006 BCM92042MDX-B88--- RF 34 Broadcom Proprietary & Confidential Note: Antenna matching network.Replace LC1=2.7pF for module only antenna matching. If your board dimensionhas enough space, please change the "L" networktype circuit with a "pi"nectwork.Please mote that thevalue on those componentsmay vary by differentlayout and differenthousing design. Note:"Pi" harmonic filterfor 2nd and 3rdharmonic +/- 0.1pF +/- 0.1pF Note:Place ground viaas close to pinF1 as possible Note: Place C40 as closeto pin D1 aspossible note: for 10pF crystal thematching caps values are--C29=12pF and C28=15pF The 1M ohm resistor would help in which design that had the crystal startup problem 115056-0020 C74_7uFC74_7uF C2922pFC2922pF LC2TBDLC2TBD C35 0_01uF C35 0_01uF LC12_7pFLC12_7pF C2820pFC2820pF R221MR221M C34 0_01uF C34 0_01uF C501.8pFC501.8pF LC31.8pFLC31.8pF C1610uFC1610uF C37470pFC37470pF C32 0_01uF C32 0_01uF L5 BEAD0402 L5 BEAD0402 A2 INV_F_ANTENNA_3 A2 INV_F_ANTENNA_3 1 2 L4BEAD0603L4BEAD0603 C33 0_01uF C33 0_01uF C84_7uFC84_7uF C36 1_3pF C36 1_3pF Y224MHz_12pFY224MHz_12pF 1 3 24 LC52.7nHLC52.7nH R12 150K R12 150K L6BEAD0402L6BEAD0402 C403_9pFC403_9pF C31 4_7uF C31 4_7uF U5B BCM2042_88 PIN_1 U5B BCM2042_88 PIN_1 RFION E1 VDDRF B1 VDDPLL G2 RES G4 VDDR3V A3 VCTRIFP H2 XTAL_IN J3 XTAL_OUT J2 GND F1 VDDTF C1 RFIOP D1 VDDXO J1 VDDVCO G1 GND E2 GND D2 GND C2 GND B2 VDDLO F2 VDDIFP H1 VREG2 A1 VREG1 A2 TST1 F3 GND G3 GND H3 55 44 33 22 11 D D C C B B A A VBATT 3P0V_13P0V 1P8V_1 P1_0P1_3P1_1P1_4P1_2 P1_5P1_6P1_7P2_0P2_1P2_2P2_3 P2_4P3_0P2_7P2_5P2_6P3_2P3_1P3_3 P3_4P0_3P0_1P0_2P0_0P0_4P0_5 P0_6 P3_5 RESET_N P0_7 P4_0P4_1P4_2P4_3P4_4P4_5 UP_TXUP_RX TitleSize Document Number Rev Date: Sheet of P1 Saturday, April 01, 2006 BCM92042MDX-B88 ---MODULE I/O 44 TitleSize Document Number Rev Date: Sheet of P1 Saturday, April 01, 2006 BCM92042MDX-B88 ---MODULE I/O 44 TitleSize Document Number Rev Date: Sheet of P1 Saturday, April 01, 2006 BCM92042MDX-B88 ---MODULE I/O 44 Broadcom Proprietary & Confidential Note: To use 2042 on chip switchingregulator for the 3v Flash connect"3P0V_1" to "3P0V" by installing R1 115056-0020 TP8TEST_POINTTP8TEST_POINT 1 TP46TEST_POINTTP46TEST_POINT 1 TP48TEST POINTTP48TEST POINT 1 TP25TEST POINTTP25TEST POINT 1 TP37TEST_POINTTP37TEST_POINT 1 TP20TEST_POINTTP20TEST_POINT 1 TP3TEST_POINTTP3TEST_POINT 1 TP32TEST_POINTTP32TEST_POINT 1 TP15TEST_POINTTP15TEST_POINT 1 TP27TEST POINTTP27TEST POINT 1 TP10TEST_POINTTP10TEST_POINT 1 TP39TEST_POINTTP39TEST_POINT 1 TP22TEST_POINTTP22TEST_POINT 1 TP44TEST_POINTTP44TEST_POINT 1 TP5TEST_POINTTP5TEST_POINT 1 TP17TEST_POINTTP17TEST_POINT 1 TP47TEST_POINTTP47TEST_POINT 1 TP34TEST_POINTTP34TEST_POINT 1 TP29TEST_POINTTP29TEST_POINT 1 TP42TEST_POINTTP42TEST_POINT 1 TP12TEST_POINTTP12TEST_POINT 1 TP50TEST_POINTTP50TEST_POINT 1 TP7TEST_POINTTP7TEST_POINT 1 TP41TEST_POINTTP41TEST_POINT 1 TP24TEST_POINTTP24TEST_POINT 1 TP19TEST_POINTTP19TEST_POINT 1 TP36TEST_POINTTP36TEST_POINT 1 TP31TEST_POINTTP31TEST_POINT 1 TP14TEST_POINTTP14TEST_POINT 1 TP9TEST_POINTTP9TEST_POINT 1 TP43TEST_POINTTP43TEST_POINT 1 TP26TEST POINTTP26TEST POINT 1 TP38TEST_POINTTP38TEST_POINT 1 R10R10 TP21TEST_POINTTP21TEST_POINT 1 TP4TEST_POINTTP4TEST_POINT 1 TP33TEST_POINTTP33TEST_POINT 1 TP16TEST_POINTTP16TEST_POINT 1 TP28TEST POINTTP28TEST POINT 1 TP11TEST_POINTTP11TES…

Text truncated - open the document above for the full version.

FCC PART 15.249 EMI MEASUREMENT AND TEST REPORT For Wagons Digital Co., Ltd Flat/Rm 1701 17/F Henan Building 90 Jaffe Road Wanchai, Hong Kong, China FCC ID: YW2ZMAP9701KB Nov. 04, 2010 This Report Concerns: Original Report Equipment Type Bluetooth keyboard Test Engineer: Eric Li Report No.: BST10100345Y-1ER-3 Receive EUT Date/Test Date: Oct.26,2010/ Oct.26-Nov.04,2010 Reviewed By: Christina Deng Prepared By: Shenzhen BST Technology Co.,Ltd. 3F,Weames Technology Building, No. 10 Kefa Road, Science Park, Nanshan District,Shenzhen,Guangdong,China Tel: 0755-267477513 Fax: 0755-267477513 ext.826 Note: The test report is specially limited to the above company and this particular sample only. It may not be duplicated without prior written consent of Shenzhen BST Technology Co.,Ltd. This report must not be used by the client to claim product certification,approval,or endorsement by NVLAP, NIST or any agency of the US Government. Wagons Digital Co., Ltd FCC ID: YW2ZMAP9701KB BST FCC ID REPORT : BST10100345Y-1ER-3 Page 2/17 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................3 1.1. Report information ............................................................................................................3 1.2. Measurement Uncertainty .................................................................................................3 2. PRODUCT DESCRIPTION ......................................................................................................4 2.1. EUT Description ...............................................................................................................4 2.2. Block Diagram of EUT Configuration..............................................................................4 2.3. Support Equipment List ....................................................................................................4 2.4. Test Conditions .................................................................................................................4 3. FCC ID LABEL...........................................................................................................................5 4. TEST RESULTS SUMMARY ...................................................................................................6 Modifications ................................................................................................................................6 5. TEST EQUIPMENT USED .......................................................................................................7 6. CONDUCTED POWER LINE TEST .......................................................................................8 6.1. Test Equipment .................................................................................................................8 6.2. Test Procedure ..................................................................................................................8 6.3. Test Setup..........................................................................................................................8 6.4. Configurating of the EUT .................................................................................................8 6.5. EUT Operating Condition...............................................................................................10 6.6. Conducted Power line Emission Limits..........................................................................10 6.7. Conducted Power Line Test Result.................................................................................10 7. RADIATED EMISSION TEST ...............................................................................................11 7.1. Test Equipment ...............................................................................................................11 7.2. Test Procedure ................................................................................................................11 7.3. Radiated Test Setup ........................................................................................................11 7.4. Confihuration of the EUT ...............................................................................................12 7.5. EUT Operating Condition...............................................................................................12 7.6. Radiated Emission Limit.................................................................................................12 7.7. Radiated Emission Test Result .......................................................................................13 8. BAND EDGE .............................................................................................................................15 8.1. Test Equipment ...............................................................................................................15 8.2. Test Procedure ................................................................................................................15 8.3. Configuration of The EUT ..............................................................................................15 8.4. EUT Operating Condition...............................................................................................15 8.5. Band Edge FCC 15.249(d) Limit ....................................................................................15 8.6. Band Edge Test Result ....................................................................................................15 Wagons Digital Co., Ltd FCC ID: YW2ZMAP9701KB BST FCC ID REPORT : BST10100345Y-1ER-3 Page 3/17 1. GENERAL INFORMATION 1.1. Report information 1.1.1.This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results mu…

Text truncated - open the document above for the full version.