YXG-ES6502HCEverGuard-Care Control Panel

- CONFIDENTIAL – DISCLOSED UNDER NDA - To Whom it may concern Subject : module equivalence Dear Sir/Madame: We, Telit Communication SpA , being the manufacturer, hereby declare that this product, Telit UMTS / HSPA 5.76/7.2 (Model Name: HE910‐NAR), is FCC & IC certied and the official label of this module is shown in the picture on the right. In addition, we declare that the engineering sample mounted in the application of our customer Essence, as shown in the picture, has the same HW configuration of the certified module that is currently in mass production. Should you have any queries, please do not hesitate to contact us. Best regards ____________________________ Product Management EMEA Telit Communications S.p.A.

EverGuard‐Care is a Personalized Home Care Solution designed for the growing population, disabled and people that suffer from dementia and that wishes to “age peacefully at home”. EverGuard‐Care Control Panel ES6502HC Personalized Home Care Solution With millions of systems and peripherals installed internationally, Essence Security is a technological and market leader in the field of advanced machine to machine solutions for homes, offices and full‐service central monitoring stations A discreet and passive monitoring of the individual’s activities of daily living (ADL) assuring his/her wellbeing. The system automatically learns the individual behavior and notifies upon nay abnormality. part of the Essence Group Long‐Range Deployments ‐over 2000 feet RF reach Remote Monitoring of System Status ‐temperature report embedded in every peripheral Various Communication Modules ‐Cellular 3G/4G Reduced Shipment Costs ‐compact, light‐weight design Less Maintenance ‐Long battery life ES6502HC Control Panel Specifications Wireless communication with the peripherals: •Up to 1000 meters RF range (open air) •End‐to‐end bidirectional ESI protocol •Advanced radio supervision algorithm •Modulation: BFSK •Frequencies: 868.3 MHz or 916.5 MHz •Encoding: 32‐bit ID, over 4 billion combinations High quality, long range voice verification: •Two‐way Audio •Enhanced echo canceling DSP‐based algorithm •Speaker programmable gain •Ultra sensitive microphone Safety Functionality: •Various Detectors (Water, Smoke, Gas, etc.) •Extreme Temperature Detection •Various panic (SOS) devices Video (external camera): •High Resolution & Quality Color motion JPEG Video* or JPEG Stills Remote Control: •Automatic Software Upgrade •Remote Programming and Configuration Electrical Power Supply: •Input: 100‐240 VAC, 50/60Hz ‐external AC adaptor •Li‐Polymer rechargeable backup battery for up to 36 hours ‐3.7V, 1.4Ah Communication Modules: •Cellular Network: GSM/GPRS/EDGE/3G •Cellular Module: Quad band (850/900/1800/1900 MHz) Communication Modules: •Interfacing protocols: SIA or Essence Proprietary Protocol (ESI) Physical: •Dimensions: 127x 127 x 72 mm (L x W x D) •Weight: 560 grams (incl. battery) •Color: White & Grey •Mounting: Desktop, Wall, with Bracket Environmental: •Operating Temperatures: 0°~ 49°Celsius General Features: •Personal Security •Multi language vocal reminders •Onboard SOS and call CMS buttons •LED indications for system status Essence Security International (E.S.I.) Ltd. www.essence‐grp.com+972‐73‐244‐7777 info@essence‐grp.com © 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice. Certifications and approvals: This device complies with FCC Rules Part 15 and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Essence Ltd.) could void the user’s authority to operate the equipment. WARNING! To comply with FCC and IC RF exposure compliance requirements, the device should be located at a distance of at least 20 cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any other antenna or transmitter. Le dispositif doit être placé à une distance d'au moins 20 cm à partir de toutes les personnes au cours de son fonctionnement normal. Les antennes utilisées pour ce produit ne doivent pas être situés ou exploités conjointement avec une autre antenne ou transmetteur.

, July 29, 2013 Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Application for certification of a control panel, FCC ID:YXG-ES6502HC Dear Gentlemen, Please find attached our application for certification of a control panel, model ES6502HC, FCC ID:YXG-ES6502HC, prepared in accordance with FCC Rules part 2 and part 15 subpart C section 15.231(a). The product testing and this application for certification were performed by Hermon Laboratories, which is listed by FCC, Registration Numbers 90623, 90624. The FCC Designation Number is US1003. Hermon Labs responsible person is Mr. Michael Nikishin, tel: +972 4626 8440, fax:+972 4628 8277, e-mail: [email protected]. Please send an invoice to Hermon Labs. We hope this application satisfies your requirements Sincerely yours, Amir Boim, HW Director

RF_160, Issue 03 Declaration of Authorization We Name: Essence Security International Ltd. Address: 12 Abba Eban avenue, Ackerstein Tower Bldg. D, P.O.Box 2073 City: Herzliya 4612001 Country: Israel Declare that: Name Representative of agent: ............. (1) Agent Company name: Hermon Laboratories Ltd. Address: Harakevet Industrial Zone City: Binyamina 30500 Country Israel is authorized to apply for Certification of the following product(s): Product description:  Control panel of Personal Emergency Response System (PERS) Type designation:  EverGuard-Care Trademark:  ES6502HC on our behalf. Date: July 18, 2013 City: Herzliya Name: Amir Boim (2) Function: HW Director Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Essence Security International Ltd. Address : 12 Abba Eban avenue, Ackerstein Tower Bldg. D, City: Herzliya 4612001 Country: Israel To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: YXG-ES6502HC Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: June 25, 2013 Name and signature of applicant: Amir Boim Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 1 of 5 EXTERNAL PHOTOGRAPHS This document contains 4 photographs Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 2 of 5 Photograph No.1 ES6502HC control panels general view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 3 of 5 Photograph No.2 ES6502HC control panel front view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 4 of 5 Photograph No.3 ES6502HC control panel rear side view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 5 of 5 Photograph No.4 ES6502HC control panel rear side with cover removed

Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 1 of 1 Label The label is affixed on the rear side of the control panel as shown below. The label material is PVC with a permanent adhesive. Label location Label with FCC ID:YXG-ES6502HC and IC:11061A-ES6502HC is located at the rear side panel. The statement according to FCC part 15 §15.19(a)(3) is placed in User’s Guide (Application exhibit User_manual_24388, page 2). FCC ID:YXG-ES6502HC IC:11061A-ES6502HC

Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 1 of 10 INTERNAL PHOTOGRAPHS This document contains 9 photographs Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 2 of 10 Photograph No.1 ES6502HC control panel internal view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 3 of 10 Photograph No.2 ES6502HC control panel internal view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 4 of 10 Photograph No.3 ES6502HC control panel PCB front view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 5 of 10 Photograph No.4 ES6502HC control panel PCB second side view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 6 of 10 Photograph No.5 Antenna view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 7 of 10 Photograph No.6 GSM module close view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 8 of 10 Photograph No.7 RF module close view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 9 of 10 Photograph No.8 RF module close view Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 10 of 10 Photograph No.9 RF PCB second side

EverGuard-Care is a Personalized Home Care Solution designed for the growing population, disabled and people that suffer from dementia and that wishes to “age peacefully at home”. EverGuard-Care Control Panel ES6502HC Personalized Home Care Solution With millions of systems and peripherals installed internationally, Essence Security is a technological and market leader in the field of advanced machine to machine solutions for homes, offices and full-service central monitoring stations A discreet and passive monitoring of the individual’s activities of daily living (ADL) assuring his/her wellbeing. The system automatically learns the individual behavior and notifies upon nay abnormality. part of the Essence Group Long-Range Deployments - over 2000 feet RF reach Remote Monitoring of System Status - temperature report embedded in every peripheral Various Communication Modules - Cellular 3G/4G Reduced Shipment Costs - compact, light-weight design Less Maintenance - Long battery life ES6502HC Control Panel Specifications Wireless communication with the peripherals: •Up to 1000 meters RF range (open air) •End-to-end bidirectional ESI protocol •Advanced radio supervision algorithm •Modulation: BFSK •Frequencies: 868.3 MHz or 916.5 MHz •Encoding: 32-bit ID, over 4 billion combinations High quality, long range voice verification: •Two-way Audio •Enhanced echo canceling DSP-based algorithm •Speaker programmable gain •Ultra sensitive microphone Safety Functionality: •Various Detectors (Water, Smoke, Gas, etc.) •Extreme Temperature Detection •Various panic (SOS) devices Video (external camera): •High Resolution & Quality Color motion JPEG Video* or JPEG Stills Remote Control: •Automatic Software Upgrade •Remote Programming and Configuration Electrical Power Supply: •Input: 100-240 VAC, 50/60Hz - external AC adaptor •Li-Polymer rechargeable backup battery for up to 36 hours - 3.7V, 1.4Ah Communication Modules: •Cellular Network: GSM/GPRS/EDGE/3G •Cellular Module: Quad band (850/900/1800/1900 MHz) Communication Modules: •Interfacing protocols: SIA or Essence Proprietary Protocol (ESI) Physical: •Dimensions: 127x 127 x 72 mm (L x W x D) •Weight: 560 grams (incl. battery) •Color: White & Grey •Mounting: Desktop, Wall, with Bracket Environmental: •Operating Temperatures: 0°~ 49° Celsius General Features: •Personal Security •Multi language vocal reminders •Onboard SOS and call CMS buttons •LED indications for system status Essence Security International (E.S.I.) Ltd. www.essence-grp.com +972-73-244-7777 [email protected] © 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice. Certifications and approvals: Essence Security International (E.S.I.) Ltd. www.essence-grp.com +972-73-244-7777 [email protected] © 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice. Control panel consists of: 1.Microcontroller 2.3G modules communicating with central operation station using cellular network respectively. 3.RF transceiver (915MHz) for communication with the peripherals 4.Speaker/microphone connected to CODEC 5.LEDs indicating system statuses 6.Power block providing all necessary voltages 7.Backup battery Block Diagram Description MCU CC1101 RF Transceiver Module SPI 3G cellular module Power Block Storage MMI (LEDS & switches) Service/ Programming/ Debug port External AC Adaptor SpeakerMicrophone Digital Audio 32.768KHz 26MHz 19.2MHz

Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC RF Exposure information The control panel transmitter operates according to FCC part 15 subpart C section 15.231(a) and RSS-210 Annex 1. The standards do not contain RF Exposure limits. The panel includes a single modular approved transmitter FCC ID:RI7HE910NA, IC:5131A- HE910NA. The power density P (mW/cm 2 ) = P T / 4 r 2 Maximum conducted output power given in FCC ID:RI7HE910NA module grant is 1648 mW (32.17 dBm) in 824.2-848.8 band. Limit for power density is f/1500 = 0.56 mW/cm 2 for 824-849 MHz for general population/uncontrolled exposure. The gain of antenna used with the module in the control panel is – 5 dBi. The maximum equivalent isotropically radiated power EIRP is P T = 32.17 dBm – 5 dBi = 27.17 dBm = 521.2 mW The power density at 20 cm is calculated as follows: 521.2 mW / 4 (20 cm) 2 = 0.1 mW/cm 2 < 0.56 mW/cm 2 General public cannot be exposed to dangerous RF level.

Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Tel. +972-4-6288001 Fax. +972-4-6288277 E-mail: [email protected] Page 1 of 51 Report ID: ESSRAD_FCC.24388.docx Date of Issue: 12-Jul-13 ELECTRICAL TESTING 0839.01 TEST REPORT ACCORDING TO: FCC CFR 47 Part 15 subpart C, section 15.231 (a) and subpart B RSS-210 issue 8 Annex 1, ICES-003 Issue 5:2012 FOR: Essence Security International Ltd. Control Panel Model: ES6502HC FCC ID:YXG-ES6502HC IC:11061A-ES6502HC This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: ESSRAD_FCC.24388.docx Date of Issue: 12-Jul-13 Page 2 of 51 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 Test configuration .......................................................................................................................................................... 5 6.3 Changes made in EUT .................................................................................................................................................. 5 6.4 Transmitter characteristics ............................................................................................................................................ 6 7 Transmitter tests according to 47CFR part 15 subpart C and RSS-210 Annex 1requirements .................................... 7 7.1 Periodic operation requirements ................................................................................................................................... 7 7.2 Field strength of emissions .......................................................................................................................................... 11 7.3 Occupied bandwidth test ............................................................................................................................................. 24 7.4 Conducted emissions .................................................................................................................................................. 26 7.5 Antenna requirements ................................................................................................................................................. 30 8 Unintentional emissions .............................................................................................................................................. 31 8.1 Conducted emissions .................................................................................................................................................. 31 8.2 Radiated emission measurements .............................................................................................................................. 35 9 APPENDIX A Test equipment and ancillaries used for tests ....................................................................................... 41 10 APPENDIX B Measurement uncertainties ................................................................................................................... 42 11 APPENDIX C Test laboratory description ................................................................................................................... 43 12 APPENDIX D Specification references ....................................................................................................................... 43 13 APPENDIX E Test equipment correction factors ......................................................................................................... 44 14 APPENDIX F Abbreviations and acronyms ................................................................................................................. 51 Report ID: ESSRAD_FCC.24388.docx Date of Issue: 12-Jul-13 Page 3 of 51 1 Applicant information Client name: Essence Security International Ltd. Address: 12 Abba Eban avenue, Ackerstein Tower Bldg. D,P.O.Box 2073, Herzliya 4612001, Israel Telephone: +972 7324 47735 Fax: +972 9772 9962 E-mail: [email protected] Contact name: Mr. Ilya Feldman 2 Equipment under test attributes Product name: Control Panel Product type: Transceiver Model(s): ES6502HC Serial number: 11130093900100003 Hardware version: V1 Software release: 8.11.252.1.8.8 Receipt date 6/6/2013 3 Manufacturer information Manufacturer name: Essence Security International Ltd. Address: 12 Abba Eban avenue, Ackerstein Tower Bldg. D,P.O.Box 2073, Herzliya 4612001, Israel Telephone: +972 7324 47735 Fax: +972 9772 9962 E-Mail: [email protected] Contact name: Mr. Ilya…

Text truncated - open the document above for the full version.

Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 1 of 8 SETUP PHOTOGRAPHS This document contains 7 photographs Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 2 of 8 Photograph No.1 Setup for spurious emission field strength measurements in the anechoic chamber below 30 MHz Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 3 of 8 Photograph No.2 Setup for spurious emission field strength measurements in the anechoic chamber in 30 – 1000 MHz range Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 4 of 8 Photograph No.3 Setup for spurious emission field strength measurements in the anechoic chamber above 1000 MHz range Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 5 of 8 Photograph No.4 Setup for occupied bandwidth measurements Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 6 of 8 Photograph No.5 Setup for periodic operation measurements Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 7 of 8 Photograph No.6 Setup for conducted emission measurements on AC power lines Essence Security International Ltd. FCC ID:YXG-ES6502HC IC:11061A-ES6502HC Page 8 of 8 Photograph No.7 Setup for conducted emission measurements on AC power lines