For more information, go to: www.essence-grp.com © 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice Indoor Photo Detector ES700IPD Detect and view events as they happen 11 Lifestyle ProductSpecifications The perfect combination of motion detection and image capture functionality. It features: •A compact, indoor detector and photo verification device •Once armed, the ES700IPD captures a photo images upon PIR detection •Can be also triggered by a user request •Compressed stream of photos are sent via RF to the control unit, and from there to a designated recipient (security service provider, email account, etc.) •Full-color JPEG photos sent through the network to monitoring service or user email •Walk through mode when combined with a Magnet Switch •Wireless and battery-operated for easy, maintenance-free installation “Plug-&-Play” state-of-the-art Wireless security system: •User-friendly •Utilizes cutting-edge technology •Bidirectional RF wireless communication •Battery operated •Easy to install •Nonintrusive, state-of-the-art design COMMUNICATION: •Bi-directional: End-to-End Bi-Directional ESI protocol •Advanced radio supervision algorithm •Up to 700 meters RF range (open air) •Modulation and Frequency: BFSK , 868.3 MHz for Europe or 916.5 MHz for USA •Encoding: 32-bit ID, over 4 billion combinations SECURITY: •Unique electronic serial number •Tamper alarm when tilted IMAGE CAPTURE: •Captured full-color JPEG photos (up to 5 frames/second) •Selectable Quality & Resolution: from 320x240 to640x480 •Illumination (for image capture in darkness/low-light): Super-bright white LED CAMERA: •VGA (640 x 480) pixel color CMOS camera •Shooting Angle (diagonal): 67° •Shooting Range: 10m / 32.8 ft. at daylight POWER: •Uses 3 standard AA Alkaline batteries, •Battery life of 3 years •DC-jack for an optional external power supply ADDITIONAL INFORMATION: •Detection Type: Passive Infrared •Insect Immunity: Sealed Optics •Pet Immune option SIZE and WEIGHT: •Dimensions: 123x60x60 mm / 4.9x2.4x2.4 In. (LxWxD) •Weight: 160 gr. / 0.35 lb. (batteries: 50 gr. / 0.11 lb.) ENVIRONMENT: •Operating Ambient Temperature range: -10°C ~ 55°C / 14°F ~ 131°F •Humidity: up to 95%, non condensing CERTIFICATION: •CE: CE mark, EMC/EMI according to ETSI EN 301 489-4, ETSI EN 301 489-1, EN 50130-4:1996, EU Directive 1999/5/EC for R&TTE •Radio: ETSI EN 300 220-3, ETSI EN 300 220-1, CEPT/ERC Recommendation 70- 03, EN 50131-5-3:2005 + A1:2008 •Safety: EN/IEC60950-1, TUV : UL 60950-1 •Security & Alarm systems: EN 50131-1:2006 + A1:2009 Class-II Grade-2, EN 50131-2-2:2008 Class-II Grade-2, EN50131-6:2008 Type-C •Reliability (Mech. & Environmental conditions): EN 50130-5:1999 &IEC 60068 Certifications and approvals: NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Essence Security International Ltd.) could void the user’s authority to operate the equipment. WARNING!To comply with FCC RF exposure compliance requirements, the device should be located at a distance of at least 20 cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any other antenna or transmitter. This devicecomplies withFCC RulesPart 15. Operationissubjectto the followingtwo conditions: (1) This devicemaynot cause harmfulinterference, and (2) This devicemust acceptanyinterferencereceived, includinginterferencethatmay cause undesiredoperation

Cover Letter(s)

, January 13, 2014 Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Application for certification of an indoor photo detector, FCC ID:YXG-ES700IPD Dear Gentlemen, Please find attached our application for certification of an indoor photo detector, model ES700IPD, FCC ID:YXG- ES700IPD, prepared in accordance with FCC Rules part 2 and part 15 subpart C section 15.231(a). The product testing and this application for certification were performed by Hermon Laboratories, which is listed by FCC, Registration Numbers 90623, 90624. The FCC Designation Number is US1003. Hermon Labs responsible person is Mr. Michael Nikishin, tel: +972 4626 8440, fax:+972 4628 8277, e-mail: [email protected]. Please send an invoice to Hermon Labs. We hope this application satisfies your requirements Sincerely yours, Igal Zertser, RF Engineering TL

External Photos

Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 1 of 3 EXTERNAL PHOTOGRAPHS This document contains 2 photographs Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 2 of 3 Photograph No.1 ES700IPD indoor photo detector front view Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 3 of 3 Photograph No.2 ES700IPD indoor photo detector rear side view

Internal Photos

Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 1 of 7 INTERNAL PHOTOGRAPHS This document contains 6 photographs Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 2 of 7 Photograph No.1 ES700IPD indoor photo detector internal view Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 3 of 7 Photograph No.2 ES700IPD indoor photo detector main PCB front view Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 4 of 7 Photograph No.3 ES700IPD main PCB second side view Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 5 of 7 Photograph No.4 RF module and antenna view Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 6 of 7 Photograph No.5 RF module front view Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 7 of 7 Photograph No.6 RF PCB second side

Operational Description

Essence Security International (E.S.I.) Ltd. www.essence-grp.com+972-73-244-7777 [email protected] © 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice. The 3 AA batteries (or optionally the DC power inlet) provide the power to the power management block, which convert it to several voltages needed by the components. The main micro-controller gets data from PIR sensor, temperature sensor, ambient light sensor and tamper switch. It interacts with the camera, JPEG encoder chip and with the RF-transceiver chip. It stores the JPEG pictures in the serial flash memory as an intermediate buffer before transmitting it towards the control panel. The product have a red indication LED and a strong white LED used as a flashlight to shoot color pictures in dark environments. Modulation and Frequency: BFSK , 868.3 for Europe MHz or 916.5MHz for USA Block Diagram Description part of the Essence Group 2 7 M H z Indoor Photo Detector ES700IPD Detect and view events as they happen

Test Report

Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Tel. +972-4-6288001 Fax. +972-4-6288277 E-mail: [email protected] Page 1 of 53 Report ID: ESSRAD_FCC.25191.docx Date of Issue: 26-Dec-13 ELECTRICAL TESTING 0839.01 TEST REPORT ACCORDING TO: FCC CFR 47 Part 15 subpart C, section 15.231 (a) and subpart B FOR: Essence Security International Ltd. Indoor Photo Detector Model:ES700IPD FCC ID:YXG-ES700IPD This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: ESSRAD_FCC.25191.docx Date of Issue: 26-Dec-13 Page 2 of 53 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 Test configuration .......................................................................................................................................................... 5 6.3 Changes made in the EUT ............................................................................................................................................ 5 6.4 Transmitter characteristics ............................................................................................................................................ 6 7 Transmitter tests according to 47CFR part 15 subpart C requirements ........................................................................ 7 7.1 Periodic operation requirements ................................................................................................................................... 7 7.2 Field strength of emissions .......................................................................................................................................... 11 7.3 Occupied bandwidth test ............................................................................................................................................. 31 7.4 Antenna requirements ................................................................................................................................................. 34 8 Unintentional emissions .............................................................................................................................................. 35 8.1 Radiated emission measurements .............................................................................................................................. 35 9 APPENDIX A Test equipment and ancillaries used for tests ....................................................................................... 41 10 APPENDIX B Measurement uncertainties ................................................................................................................... 42 11 APPENDIX C Test laboratory description ................................................................................................................... 43 12 APPENDIX D Specification references ....................................................................................................................... 43 13 APPENDIX E Test equipment correction factors ......................................................................................................... 44 14 APPENDIX F Abbreviations and acronyms ................................................................................................................. 52 15 APPENDIX G Manufacturer’s declaration ................................................................................................................... 53 Report ID: ESSRAD_FCC.25191.docx Date of Issue: 26-Dec-13 Page 3 of 53 1 Applicant information Client name: Essence Security International Ltd. Address: 12 Abba Eban Avenue, Ackerstein Towers Bldg. D, P.O.B. 2073, Herzliya 4612001, Israel Telephone: +972 73 244 7735 Fax: +972 9772 9962 E-mail: [email protected] Contact name: Mr. Israel Gottesman 2 Equipment under test attributes Product name: Indoor photo detector Product type: Transceiver Model(s): ES700IPD Serial number: 46110926005f18f6 Hardware version: 3C Software release: 3C Receipt date 25-Nov-13 3 Manufacturer information Manufacturer name: Essence Security International Ltd. Address: 12 Abba Eban Avenue, Ackerstein Towers Bldg. D, P.O.B. 2073, Herzliya 4612001, Israel Telephone: +972 73 244 7735 Fax: +972 9772 9962 E-Mail: [email protected] Contact name: Mr. Israel Gottesman 4 Test details Project ID: 25191 Location: Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Test started: 25-Nov-13 Test completed: 16-Dec-13 Test specification(s): FCC 47CFR part 15, …

Text truncated - open the document above for the full version.

Test Setup Photos

Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 1 of 8 SETUP PHOTOGRAPHS This document contains 7 photographs Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 2 of 8 Photograph No.1 Setup for spurious emission field strength measurements in the anechoic chamber below 30 MHz Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 3 of 8 Photograph No.2 Setup for carrier and spurious emission field strength measurements in the anechoic chamber in 30 – 1000 MHz range Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 4 of 8 Photograph No.3 Setup for spurious emission field strength measurements in the anechoic chamber above 1000 MHz Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 5 of 8 Photograph No.4 Setup for spurious emission field strength measurements in the anechoic chamber, EUT close view Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 6 of 8 Photograph No.5 Setup for carrier field strength measurements at the OATS Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 7 of 8 Photograph No.6 Setup for occupied bandwidth measurements Essence Security International Ltd. FCC ID:YXG-ES700IPD Page 8 of 8 Photograph No.7 Setup for occupied bandwidth measurements