YXG-ES700ISNIndoor siren

For more information, go to: www.essence-grp.com © 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice Indoor Siren ES700ISN Indoor, bi-directional, battery-operated RF siren 11 Lifestyle ProductSpecifications An indoor bi-directional RF battery-operated loud siren. It features: •Upon Intrusions detection, loud siren sound (105 dBA sound output from 1 meter) is activated for 5 to 180 seconds (user defined parameter) •Adjustable volume level •Two orange LED strobes •Two kinds of security alarm sounds, safety alarm sound, entry/exit beeps and chime. •Two modes: operational and maintenance “Plug-&-Play” state-of-the-art Wireless security system: •User-friendly •Utilizes cutting-edge technology •Bidirectional RF wireless communication •Battery operated •Easy to install •Nonintrusive, state-of-the-art design COMMUNICATION: •Bi-directional: End-to-End Bi-Directional ESI protocol •Advanced radio supervision algorithm •Up to 700 meters / 2296 ft. RF range (open air) •Modulation and Frequency: BFSK , 868.3 MHz for Europe or 916.5 MHz for USA •Encoding: 32-bit ID, over 4 billion combinations SECURITY: •Tamper mechanism when removed from wall mount •Unique electronic serial number POWER CONSUMPTION: •Long operation period (over 36 months) without external power source •Uses 4 standard AA Alkaline batteries SIZE and WEIGHT: •Dimensions: 120x120x40 mm / 4.7x4.7x1.6 In. (LxWxD) •Weight: 150 gr. / 0.33 lb. (batteries: 100 gr. / 0.22 lb.) ENVIRONMENT: •Operating Ambient Temperature range: -10°C ~ 55°C / 14°F ~ 131°F •Humidity: up to 95%, non condensing CERTIFICATION: •CE: CE mark, EMC/EMI according to ETSI EN 301 489-4, ETSI EN 301 489-1, EN 50130-4:1996, EU Directive 1999/5/EC for R&TTE •Radio: ETSI EN 300 220-3, ETSI EN 300 220-1, CEPT/ERC Recommendation 70-03, EN 50131-5-3:2005 + A1:2008 •Safety: EN/IEC60950-1, TUV : UL 60950-1 •Security & Alarm systems: EN 50131-1:2006 + A1:2009 Class-II Grade- 2, EN 50131-4:2009 Class-II Grade-2, EN50131-6:2008 Type-C •Environmental Regulation: RoHS2002/95/EC •Reliability (Mechanical & Environmental conditions): EN 50130-5:1999 and IEC 60068 •Manufacturing and Materials Standards: ISO 9001:2008, ISO 14000 Certifications and approvals: NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Essence Security International Ltd.) could void the user’s authority to operate the equipment. WARNING!To comply with FCC RF exposure compliance requirements, the device should be located at a distance of at least 20 cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any other antenna or transmitter. This devicecomplies withFCC RulesPart 15. Operationissubjectto the followingtwo conditions: (1) This devicemaynot cause harmfulinterference, and (2) This devicemust acceptanyinterferencereceived, includinginterferencethatmay cause undesiredoperation

, January 14, 2014 Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Application for certification of an indoor siren, FCC ID:YXG-ES700ISN Dear Gentlemen, Please find attached our application for certification of an indoor siren, model ES700ISN, FCC ID:YXG-ES700ISN, prepared in accordance with FCC Rules part 2 and part 15 subpart C section 15.231(a). The product testing and this application for certification were performed by Hermon Laboratories, which is listed by FCC, Registration Numbers 90623, 90624. The FCC Designation Number is US1003. Hermon Labs responsible person is Mr. Michael Nikishin, tel: +972 4626 8440, fax:+972 4628 8277, e-mail: [email protected]. Please send an invoice to Hermon Labs. We hope this application satisfies your requirements Sincerely yours, Igal Zertser, RF Engineering TL

Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 1 of 3 EXTERNAL PHOTOGRAPHS This document contains 2 photographs Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 2 of 3 Photograph No.1 ES700ISN indoor siren front view Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 3 of 3 Photograph No.2 ES700ISN indoor siren rear side view

Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 1 of 1 Label The label is affixed on the rear side of the indoor siren as shown below. The label material is PVC with a permanent adhesive. Label location Label with FCC ID:YXG-ES700ISN is located at the rear side panel. The statement according to FCC part 15 §15.19(a)(3) is placed in User’s Guide (Application exhibit User_manual_25192). FCC ID:YXG-ES700ISN

Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 1 of 7 INTERNAL PHOTOGRAPHS This document contains 6 photographs Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 2 of 7 Photograph No.1 ES700ISN indoor siren internal view Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 3 of 7 Photograph No.2 ES700ISN indoor siren main PCB front view Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 4 of 7 Photograph No.3 ES700ISN main PCB second side view Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 5 of 7 Photograph No.4 RF module and antenna view Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 6 of 7 Photograph No.6 RF PCB front view Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 7 of 7 Photograph No.6 RF PCB second side view

Essence Security International (E.S.I.) Ltd. www.essence-grp.com+972-73-244-7777 [email protected] © 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice. The 4 AA batteries provide the power directly to the board components and through a switched LDO to the speaker. The main micro-controller gets data from a tamper switch and interacts with the RF-transceiver chip in the RF-module. It also control the activation and the volume of the siren emitting speaker. The product have a red indication LED. Modulation and Frequency: BFSK , 868.3 for Europe MHz or 916.5MHz for USA Block Diagram Description part of the Essence Group Indoor Siren ES700ISN Indoor, bi-directional, battery-operated RF siren

Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Tel. +972-4-6288001 Fax. +972-4-6288277 E-mail: [email protected] Page 1 of 54 Report ID: ESSRAD_FCC.25192.docx Date of Issue: 26-Dec-13 ELECTRICAL TESTING 0839.01 TEST REPORT ACCORDING TO: FCC CFR 47 Part 15 subpart C, section 15.231 (a) and subpart B FOR: Essence Security International Ltd. Indoor Siren Model:ES700ISN FCC ID:YXG-ES700ISN This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: ESSRAD_FCC.25192.docx Date of Issue: 26-Dec-13 Page 2 of 54 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 Test configuration .......................................................................................................................................................... 5 6.3 Changes made in the EUT ............................................................................................................................................ 5 6.4 Transmitter characteristics ............................................................................................................................................ 6 7 Transmitter tests according to 47CFR part 15 subpart C requirements ........................................................................ 7 7.1 Periodic operation requirements ................................................................................................................................... 7 7.2 Field strength of emissions .......................................................................................................................................... 11 7.3 Occupied bandwidth test ............................................................................................................................................. 32 7.4 Antenna requirements ................................................................................................................................................. 35 8 Unintentional emissions .............................................................................................................................................. 36 8.1 Radiated emission measurements .............................................................................................................................. 36 9 APPENDIX A Test equipment and ancillaries used for tests ....................................................................................... 42 10 APPENDIX B Measurement uncertainties ................................................................................................................... 43 11 APPENDIX C Test laboratory description ................................................................................................................... 44 12 APPENDIX D Specification references ....................................................................................................................... 44 13 APPENDIX E Test equipment correction factors ......................................................................................................... 45 14 APPENDIX F Abbreviations and acronyms ................................................................................................................. 53 15 APPENDIX G Manufacturer’s declaration ................................................................................................................... 54 Report ID: ESSRAD_FCC.25192.docx Date of Issue: 26-Dec-13 Page 3 of 54 1 Applicant information Client name: Essence Security International Ltd. Address: 12 Abba Eban Avenue, Ackerstein Towers Bldg. D, P.O.B. 2073, Herzliya 4612001, Israel Telephone: +972 73 244 7735 Fax: +972 9772 9962 E-mail: [email protected] Contact name: Mr. Israel Gottesman 2 Equipment under test attributes Product name: Indoor siren Product type: Transceiver Model(s): ES700ISN Serial number: 4013091f00240bff Hardware version: 2 Software release: 1.14.3 Receipt date 27-Nov-13 3 Manufacturer information Manufacturer name: Essence Security International Ltd. Address: 12 Abba Eban Avenue, Ackerstein Towers Bldg. D, P.O.B. 2073, Herzliya 4612001, Israel Telephone: +972 73 244 7735 Fax: +972 9772 9962 E-Mail: [email protected] Contact name: Mr. Israel Gottesman 4 Test details Project ID: 25192 Location: Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Test started: 27-Nov-13 Test completed: 16-Dec-13 Test specification(s): FCC 47CFR part 15, subpart C, §15.…

Text truncated - open the document above for the full version.

Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 1 of 8 SETUP PHOTOGRAPHS This document contains 7 photographs Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 2 of 8 Photograph No.1 Setup for spurious emission field strength measurements in the anechoic chamber below 30 MHz Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 3 of 8 Photograph No.2 Setup for carrier and spurious emission field strength measurements in the anechoic chamber in 30 – 1000 MHz range Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 4 of 8 Photograph No.3 Setup for spurious emission field strength measurements in the anechoic chamber above 1000 MHz Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 5 of 8 Photograph No.4 Setup for spurious emission field strength measurements in the anechoic chamber, EUT close view Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 6 of 8 Photograph No.5 Setup for carrier field strength measurements at the OATS Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 7 of 8 Photograph No.6 Setup for occupied bandwidth measurements Essence Security International Ltd. FCC ID:YXG-ES700ISN Page 8 of 8 Photograph No.7 Setup for occupied bandwidth measurements