Z3M-GGL30Lighting Gateway

Lighting Kit {Model Numbers} Table of Contents Lighting Kit Overview 1 Basic Concepts of Wireless Lighting 2 Planning Your Lighting Network 2 Installation 6 Installation without a Gateway 7 Installation with a Gateway 9 Remote Control 12 Turning Lights on and Off 14 Dimming and Brightening Lights 14 Programming Lighting Groups 15 Adding Additional Light Bulbs to the Network 17 Adding Additional Remote Controls to the Network 19 Installing Batteries 20 Mobile Application 22 Gateway 23 Adding a Gateway to a Lighting Network 26 Troubleshooting 27 Safety Information 30 About GreenWave 32 Product Specifications 34 1 Lighting Kit Overview The GreenWave Reality lighting kit includes a wireless smart lighting system that helps make the lighting in your home more energy efficient and easier to manage. The kit includes LED light bulbs and a remote control that work together to help you manage your lighting wirelessly. Depending on your lighting kit, it may also include a GreenWave Reality Gateway, which provides an enhanced network connection to your light bulbs. This Gateway connection allows you to use your smartphone to set up and manage your home lighting system and to set up user- defined Smart Controls to set schedules and other controls for automatically turning your lighting on or off. 2 Basic Concepts of Wireless Lighting Wireless light bulbs work with your light fixtures the same way as standard light bulbs. They are different, however, in a couple of ways: • The lighting element in the light bulb uses LED technology, making your lighting more energy efficient. • The light bulb includes wireless technology that allows the light bulb to connect to a network and be managed remotely. Because the light bulbs can be connected to a network, you have greater flexibility in how you use them. For example, you can program your lighting network so that when you press a button upon arriving home, an entryway and a hallway light turn on. Or when you go to bed, your remote control can turn off all lights on the network. Planning Your Lighting Network Whether you have only one wireless light bulb, or you are replacing your entire home lighting with wireless light bulbs, you should plan how you want the lighting on your network to behave. For example, if you only have one light bulb you might want to place it in a central location that would be optimum for turning on and off when you are away or arrive home. If you have multiple light bulbs, however, you might want to set them up in lighting groups to be able to better manage them across your home. 3 Lighting Groups A lighting group is a set of network light bulbs that you can control together through your remote control or mobile application (for kits with a Gateway). For example, you might have a lighting group that includes light bulbs on the same floor. Or you might have a group that includes hallway and entryway lights, making it easy to turn on or off as you arrive or leave home. All light bulbs in the same group turn on and off together and brighten or dim to the same level. A light bulb can belong to more than one lighting group, allowing you to include it in different groups for different purposes. There are some limitations: • One light bulb can belong to a maximum of eight different lighting groups. • One remote control can control up to four different lighting groups. • You can add additional remote controls to add four more lighting groups per remote control. • The Gateway (if included) does not have lighting group limitations other than the eight-group limit on light bulbs. Multi-fixture Lights When installing light bulbs or setting up lighting groups, you should consider how you want multi-fixture lights to behave. Since power to the light has to remain on (so the remote control or mobile application can access the light bulb) you would either use all network light bulbs in a multi-fixture light or no network light bulbs at all. If you are using network light bulbs in a multi-fixture light, you should add them all to the same group so that they turn on and off together (though you do not have to). 4 Network Range As with any remote control, your lighting kit’s remote control must be within range of your lighting network to be able to control your lighting. However, this does not mean that it has to be within range of any particular light bulb. Since the light bulbs on your network are interconnected across the network, they can pass commands to each other as long as they are within network range of each other. This means that a nearby light bulb can receive your remote control command and pass that command across the network of connected light bulbs, ultimately to a light bulb you want to control in a distant room. Because of this effect, larger homes would make better use of having more network light bulbs spread across the home, maintaining a distance that allows each light bulb to communicate with one another. If you are using the mobile application (for kits with a Gateway), the only restriction for your smartphone is that it maintains network connectivity with the Gateway. If your Gateway is connected to the Internet through a router, you could even access your lighting network from your smartphone from a remote location. Maximum Number of Light Bulbs If your lighting network includes a Gateway, you can install up to 250 light bulbs on the same network. If you are using only a remote control, you can install up to 40 light bulbs. Power and Power Failure with Wireless Light Bulbs Wireless light bulbs are powered through light fixtures the same way standard light bulbs are. However, you must leave the light fixtures in the on position so that power is available when using your remote control to turn the 5 wireless light bulbs on and off. If power is removed from a light bulb, whether from power failure or from manually turning off the light fixture, the light bulb will of course turn off. When power is restored, all network light bulbs…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6

Label

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5

FCC ID: Z3M-GGL30 Report No.: RF111015C04 Operational Description The transmitter of the EUT (Lighting Gateway) is powered by by 5Vdc from AC adapter. The output power of this device is very low. Under normal use condition, the transmitter and the receiver are quite close, so high EIRP power is neither necessary nor allowed because of interference. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF111015C04 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO. :RF111015C04 MODEL NO. :GL30000-xy (refer to item 3.1 for more details) FCC ID :Z3M-GGL30 RECEIVED :Oct. 15, 2011 TESTED :Oct. 20 ~ Oct. 21, 2011 ISSUED :Nov. 01, 2011 APPLICANT : Greenwave Reality Pte Ltd ADDRESS : 41 Science Park Road, #03-01, The Gemini, Science Park II, Singapore 117610 ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 33 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF111015C04 2 Report Format Version 4.0.0 Table of Contents RELEASE CONTROL RECORD...............................................................................................3 1. CERTIFICATION ...........................................................................................................4 2. SUMMARY OF TEST RESULTS ...................................................................................5 2.1 MEASUREMENT UNCERTAINTY ................................................................................5 3. GENERAL INFORMATION............................................................................................6 3.1 GENERAL DESCRIPTION OF EUT..............................................................................6 3.2 DESCRIPTION OF TEST MODES................................................................................7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................10 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................10 4. TEST TYPES AND RESULTS ..................................................................................... 11 4.1 RADIATED EMISSION MEASUREMENT ................................................................... 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................. 11 4.1.2 TEST INSTRUMENTS ................................................................................................12 4.1.3 TEST PROCEDURES .................................................................................................13 4.1.4 DEVIATION FROM TEST STANDARD .......................................................................13 4.1.5 TEST SETUP ..............................................................................................................14 4.1.6 EUT OPERATING CONDITIONS ................................................................................14 4.1.7 TEST RESULTS ..........................................................................................................15 4.2 CONDUCTED EMISSION MEASUREMENT ..............................................................21 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................................21 4.2.2 TEST INSTRUMENTS ................................................................................................21 4.2.3 TEST PROCEDURES .................................................................................................22 4.2.4 DEVIATION FROM TEST STANDARD .......................................................................22 4.2.5 TEST SETUP ..............................................................................................................23 4.2.6 EUT OPERATING CONDITIONS ................................................................................23 4.2.7 TEST RESULTS ..........................................................................................................24 4.3 BAND EDGES MEASUREMENT ................................................................................28 4.3.1 LIMITS OF BAND EDGES MEASUREMENT .............................................................28 4.3.2 TEST INSTRUMENTS ................................................................................................28 4.3.3 TEST PROCEDURE ...................................................................................................28 4.3.4 DEVIATION FROM TEST STANDARD .......................................................................28 4.3.5 EUT OPERATING CONDITION ..................................................................................28 4.3.6 TEST RESULTS ..........................................................................................................29 5. PHOTOGRAPHS OF THE TEST CONFIGURATION..................................................31 6. INFORMATION ON THE TESTING LABORATORIES ................................................32 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.........................................................................................33 Report No.: RF111015C04 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Nov. 01, 2011 Report No.: RF111015C04 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: Lighting Gateway MODEL NO.: GL30000-xy (refer to item 3.1 for more details) BRAND: greenWAVE APPLICANT: Greenwave Reality Pte Ltd TESTED: Oct. 20 ~ Oct. 21, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST TEST MODE A 2 CONDUCTED EMISSION TEST TEST MODE B 3 RADIATED EMISSION TEST TEST MODE A 4 RADIATED EMISSION TEST TEST MODE B