Z9M-PAN10P63A Wireless Current Sensor with Power Measurement Ability

centricabusinesssolutions.com Current measurement accuracy Wireless electricity Technical specifications Our electricity sensor series is comprised of non-invasive, self-powered, miniature wireless current sensors. The sensors clamp onto the electrical outgoing wire from the circuit breaker and are self-powered by the circuit’s magnetic field Hundreds of sensors can be installed in a few hours with no disturbance to daily operations. Once installed, the sensors become part of the building infrastructure, never requiring maintenance, service or battery replacement. PAN-10P wireless current sensors specifications Physical dimensions Current measurement range 0 – 63 A Minimum operating current 0.5 – 1 A (typical) Transmission frequency Key features •Non-invasive – snaps and fits without disconnection •No maintenance; self-powered •High accuracy •Wireless – no wiring, Transmission interval unlike standard CT-based monitoring systems •Real-time current data transmitted every 10seconds Max hot-wire outer diameter (including insulation) PAN-10P sensor 60 Hz AC frequency supported 915 MHz 10 seconds 7mm 0.28 inch Typically <2% at I > 3 A 17 x 20 x 32 mm 0.67 x 0.79 x 1.26 inch centricabusinesssolutions.com Wireless electricity sensor family overview Japan Europe EMC: EN ETSI 301 489-1, 301 489-3 Radio: EN ETSI 300 220-1, 300 220-2 USA and Canada Safety: UL 61010-2-030 EMC: FCC Part 15 subpart B, FCC Part 15 subpart C Certification 1 Ingress protection (IP) rating IP5X Operating humidity range 5% – 95% non-condensing Operating humidity range 5% – 95% non-condensing PAN-10P wireless current sensors specifications Flammability rating of external enclosure UL94 V-0 Operating temperature -25 – 60°C / -13 – 140°F 2 Storage temperature -25 – 65°C / -13 – 149°F Operating temperature -25 – 60°C / -13 – 140°F Storage temperature -25 – 65°C / -13 – 149°F Ingress protection (IP) rating IP5X CB Certification IEC 61010-1, IEC 61010-2-030 by Intertek Testing Services centricabusinesssolutions.com Wireless electricity sensor family overview FCC Warnings Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC Rules. ISED Warning (Modification statement) Panoramic Power n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur. RF Exposure Warnings Mobile Device RF Exposure Statement Statement in UM RF Exposure - This device is only authorized for use in a mobile application. At least 20 cm of separation distance between the PAN-10-P Sensors and the user's body must be maintained at all times. Interference statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Wireless notice This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS‐102 of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le présent appareil est conforme à l'exposition aux radiations FCC / ISED définies pour un environnement non contrôlé et répond aux directives d'exposition de la fréquence de la FCC radiofréquence (RF) et RSS‐102 de la fréquence radio (RF) ISED règles d'exposition. L'émetteur ne doit pas être colocalisé ni fonctionner conjointement avec à autre antenne ou autre émetteur.

DATE : 2020-10-29 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: Z9M-PAN10P Product Name: 63A Wireless Current Sensor with Power Measurement Ability Request for Confidentiality To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: Name: Yael Alali Title: Hardware Team Leader Company: Panoramic Power ltd.

DATE : 2020-10-29 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Panoramic Power ltd. and 15 Atir Yeda St., Kfar Saba, 4464312, Israel Signature: Name: Yael Alali Title: Hardware Team Leader Company: Panoramic Power ltd.

Test Model No.: PAN‐10P‐US

Revision Panoramic Power - PAN-LB-10-US-S1 DescriptionDate RevAPAN-10P-US side label04/11/20 Example: Design instructions: PN PAN-10P-USPAN-10P-US side labelFCC text: "FCC ID: Z9M-PAN10P" ETL logo & control number under it ("4005082") part number: PAN-10P-US WEEE logo IC: 23144-PAN10P HVIN: I1 9.6x12.6 mm, R=0.4 DescriptionSize [wxh in mm] Includes Fonts: Part number font: FS Joey Pro Medium 5.4 pt; kerning: 24 Intertek - number: FS Joey Pro Regular 4 pt, Kerning: -40 FCC ID - FS Joey Pro 4.2 pt; kerning: special [the text fit form top to bottom of Part number] IC, HVIN: FS Joey Pro 4.2 pt; kerning: 0 Colors: Texts & logos color: PANTONE 426C Sticker background color: Silver Please maintain the spaces and sizes as in this design. Actual size:200%: Side: Alignment: 4005082 PAN-10P-US FCC ID: Z9M-PAN10P IC: 23144-PAN10P HVIN: I1 4005082 PAN-10P-US FCC ID: Z9M-PAN10P IC: 23144-PAN10P HVIN: I1 006843089 Panoramic Power PAN-10P 4005082 PAN-10P-US FCC ID: Z9M-PAN10P IC: 23144-PAN10P HVIN: I1 4005082 PAN-10P-US FCC ID: Z9M-PAN10P IC: 23144-PAN10P HVIN: I1 Side 006843089 Panoramic Power PAN-10P 400 5082 P AN-1 0 P-U S FCC I D : Z9 M - PA N 1 0 P IC: 2 3 1 4 4 - PA N 1 0 P H V IN : I1 4005082 PAN-10P-US FCC ID: Z9M-PAN10P IC: 23144-PAN10P HVIN: I1 4005082 PAN-10P-US FCC ID: Z9M-PAN10P IC: 23144-PAN10P HVIN: I1 4005082 PAN-10P-US FCC ID: Z9M-PAN10P IC: 23144-PAN10P HVIN: I1 Design instructions: Align w: 0.24 mm h: 0.315 mm Dimensions: [in mm] - 1 ETL logo size: 4.432 x6.103 w:0.445 space between texts lines 2w:0.635 Space from left to WEEE logo 3 6 w:6.402 4h:1.893 h:2.422 5 Revision Panoramic Power - PAN-LB-10-US-S1 DescriptionDate RevAPAN-10P-US side label04/11/20

Test Model No.: PAN‐10P‐US

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10- g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m Sopt = (EXd) 2 /30 x gt Ant gain=-12 dBi ; so Ant numeric gain= 0.063 Field strength =85.01dBμV/m @3m So Pt={ [10 (85.01 /20) /10 6 x3] 2 /30x 0.063}x1000 mW = 1.51 mW So ( 1.51 mW/5mm)x √0.915 GHz = 0.3 < 3 Then SAR evaluation is not required

Global United Technology Services Co., Ltd. Report No.: GTS202010000062-01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 20 TEST REPORT Applicant: FCC ID: Panoramic Power ltd. IC: Panoramic Power Ltd. Address of Applicant: FCC ID: 15 Atir Yeda St., Kfar Saba, 4464312, Israel IC: Atir Yeda St 15 Kfar Saba 4464312 Israel Manufacturer: FCC ID: Panoramic Power ltd. IC: Panoramic Power Ltd. Address of Manufacturer: FCC ID: 15 Atir Yeda St., Kfar Saba, 4464312, Israel IC: Atir Yeda St 15 Kfar Saba 4464312 Israel Factory: Global Brands Manufacture Ltd. Address of Factory: Yue Yuen Industrial Estate, Huang Jiang ZhenDongguan City, Guangdong Province, 523758,China Equipment Under Test (EUT) Product Name: Model No.: HVIN: FCC ID: IC: Applicable standards: 63A Wireless Current Sensor with Power Measurement Ability PAN-10P-US I1 Z9M-PAN10P Date of sample receipt: October 16, 2020 Date of Test: October 16-29, 2020 Date of report issued: October 29, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. FCC CFR Title 47 Part 15 Subpart C Section 15.249 RSS-Gen Issue 5 March 2019 RSS-210 Issue 10 December 2019 23144-PAN10P Report No.: GTS202010000062-01 Page 2 of 20 2 Version Version No. Date Description 00 October 29, 2020 Original Prepared By: Date: October 29, 2020 Project Engineer Check By: Date: October 29, 2020 Reviewer Report No.: GTS202010000062-01 Page 3 of 20 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 6 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 6 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 6 5.6 TEST FACILITY .................................................................................................................................... 6 5.7 TEST LOCATION ................................................................................................................................. 6 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 CONDUCTED EMISSIONS ..................................................................................................................... 9 7.2 RADIATED EMISSION METHOD ........................................................................................................... 12 7.2.1 Field Strength of The Fundamental Signal and spurious emissions ......................................... 14 7.2.2 Spurious emissions .................................................................................................................... 15 7.3 20DB OCCUPY BANDWIDTH AND 99% OCCUPIED BANDWIDTH ........................................................... 19 8 TEST SETUP PHOTO ............................................................................................................................ 20 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 20 Report No.: GTS202010000062-01 Page 4 of 20 4 Test Summary Test Item Section Result AC Power Line Conducted Emission 15.207 RSS-Gen Section 8.8 Pass Field strength of the fundamental signal 15.249 (a) RSS-210 B10(a) Pass Spurious emissions 15.249 (a) (d)/15.209 RSS-Gen Clause 8.9&8.10 Pass Band edge 15.249 (d)/15.205 RSS-210 B10(b) Pass 20dB Occupied Bandwidth and 99% Occupied Bandwidth 15.215 (c) RSS-Gen 6.7 Pass Pass: The EUT complies with the essential requirements in the standard. Remark: Test according to ANSI C63.10: 2013 and ANSI C63.4: 2014. 4.1 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 30MHz-200MHz 3.8039dB (1) Radiated Emission 200MHz-1GHz 3.9679dB (1) Radiated Emission 1GHz-18GHz 4.29dB (1) Radiated Emission 18GHz-40GHz 3.30dB (1) AC Power Line Conducted Emission 0.15MHz ~ 30MHz 3.44dB (1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. Report No…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission