ZKZ-MC-16ComputerSystem Graupner/SJ HoTT

33016.mc-16HoTT.1.en Programming ManualoProPro mc-16 mc-16 MC-16 MC-16

✷ ❚❛❧✁✂✄☎✂✆✝✁✆✝✞ ❈✟✠✡☛✟☞❦✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳✳ ✳✸✌ ❙✡☞✍✡✎✏✟✠✡✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳✳ ✳✸✷ ❉✑✒✓☛✔②☞✟✕✎ ✍✔✒✎✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✸✷ ▲✔✕✖✗✔✖✡✒✡☛✡☞✎✑✟✕ ❱✟✑☞✡✗✓✠✔✎ ✡✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✸✷ ❈✘✔✕✖✡✟✙✠✑✒✓☛✔②☛✔✕✖✗✔✖✡✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✸✸ ❋✑✍✏♠✔✍✡✗✓✠✔✎ ✡✚✑✔❙❉☞✔✍✠✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✸✛ ❏✟②✒✎✑☞❦☞✔☛✑✜✍✔✎✑✟✕✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✸✛ ✢✡☛✡✏✡✎ ✍②✠✔✎✔✠✑✒✓☛✔②✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✸✛ ❈✟✏✏✑✒✒✑✟✕✑✕✖✎✘✡✎ ✍✔✕✒✏✑✎ ✎ ✡✍✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✹✷ ❋✑✍✏♠✔✍✡✗✓✠✔✎ ✡✚✑✔✣❈✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✹✸ ❈✟✏✏✑✒✒✑✟✕✑✕✖✎✘✡✍✡☞✡✑✚✡✍✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✹✛ ❘✡☞✡✑✚✡✍✒②✒✎ ✡✏✓✟♠✡✍✒✗✓✓☛②✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✹✤ ● ✡✕✡✍✔☛☞✘✔✍✖✑✕✖✕✟✎✑☞✡✒✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✹✥ ❋✑✍✏♠✔✍✡✗✓✠✔✎ ✡✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✺✦ ■✕✒✎✔☛☛✔✎✑✟✕✕✟✎✑☞✡✒✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳✳ ✳ ✳ ✳✳ ✳✺✷ ✢✡✍✏✠✡✧✕✑✎✑✟✕✒✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✳ ✳✳ ✳✺✹ ❆✒✒✑✖✕✑✕✖✎✍✔✕✒✏✑✎ ✎ ✡✍☞✟✕✎ ✍✟☛✒✱✒♠✑✎ ☞✘✡✒ ✔✕✠☞✟✕✎ ✍✟☛✒♠✑✎ ☞✘✡✒✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✳ ✳ ✳✳ ✳✺✛ ❉✑✖✑✎✔☛✎ ✍✑✏✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✺★ ❲✑✕✖✡✠✏✟✠✡☛✒✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✛✦ ❘✡☞✡✑✚✡✍☛✔②✟✗✎✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳✳ ✳ ✳ ✳✳ ✳✛✌ ❍✡☛✑☞✟✓✎ ✡✍✏✟✠✡☛✒✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✛✹ ❘✡☞✡✑✚✡✍☛✔②✟✗✎✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳✳ ✳ ✳ ✳✳ ✳✛✺ P✩✂♦✩ ❛✪✫✁✞☎✩ ✬✭✝✬ ✂✆✞ ▲✟✔✠✑✕✖✔✕✡♠✏✡✏✟✍②☛✟☞✔✎✑✟✕✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✛✛ ➮▼ ✂✫✁❧✞✁❧✁☎✝ ➬✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✳ ✳ ✳✳ ✳✛✥ ➮✮ ✂✭ ✯✰✲ ✩❛✞✁ ➬✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✳ ✳ ✳✳ ✳✤✦ ❊✍✔✒✡✏✟✠✡☛✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✳ ✳✳ ✳✤✦ ❈✟✓②✏✟✠✡☛✴✵✟✠✡☛✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✤✦ ❊✶✓✟✍✎✎ ✟❙❉☞✔✍✠✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳✤✌ ■✏✓✟✍✎✙ ✍✟✏❙❉☞✔✍✠✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳✤✷ ❈✟✓②✻✑✖✘✎✓✘✔✒✡✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✤✷ ❈✘✔✕✖✡✒✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✤✸ ➮ ✼✽ ✭✭✩✁✞✞☎✂✫✁✞ ➬✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✤✹ ➮✼✽ ✭✭✩✁✞✞✪✂✫✁❧✞ ➬✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✤✺ ➮❇ ❛✞✬ ☎✞✁✝✝✬ ✆♦✞ ✾ ✪ ✂✫✁❧ ➬ ❲✑✕✖✡✠✏✟✠✡☛✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳✳✤✛ ✿✑✕✠✑✕✖✍✡☞✡✑✚✡✍✒✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✤✤ ❀ ✁✆✁✩ ❛❧✆✂✝✬ ☎✁✞ ✢✔✜☛✡✟✙☞✟✕✎ ✡✕✎✒✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳✳ ✳ ✳ ✳✷ ❊✕✚✑✍✟✕✏✡✕✎✔☛✓✍✟✎✡☞✎✑✟✕✕✟✎✑☞✡✒✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✸ ❙✔✙✡✎ ②✕✟✎✑☞✡✒✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✹ ❙✔✙✡✎ ②✕✟✎✑☞✡✒✔✕✠✘✔✕✠☛✑✕✖✍✡✖✗☛✔✎✑✟✕✒✙✟✍ ▲✑✎✘✑✗✏❁■ ✟✕❂▲✑■✟❃✔✕✠▲✑✎✘✑✗✏❁✣✟☛②✏✡✍ ❂▲✑✣✟❃✜✔✎ ✎✡✍✑✡✒✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✳ ✳✳ ✳ ✳ ✳ ✳✤ ❋✟✍✡♠✟✍✠✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌✦ ❘✡✏✟✎ ✡☞✟✕✎ ✍✟☛✒✡✎✠✡✒☞✍✑✓✎✑✟✕✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌✌ ✢✡☞✘✕✑☞✔☛✠✔✎✔✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌✹ ● ✡✕✡✍✔☛✟✓✡✍✔✎✑✕✖✕✟✎✑☞✡✒ ✢✍✔✕✒✏✑✎ ✎ ✡✍✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌✛ ❖✓✡✕✑✕✖✎✘✡✎ ✍✔✕✒✏✑✎ ✎ ✡✍✘✟✗✒✑✕✖✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌✛ ✢✍✔✕✒✏✑✎✎ ✡✍✓✟♠✡✍✒✗✓✓☛②✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✌✛ ❘✡☞✟✏✏✡✕✠✡✠☞✘✔✍✖✡✍✒✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌✤ ✿✔✎ ✎ ✡✍②✟✓✡✍✔✎✑✟✕✎✑✏✡✍✑✕✠✑✒✓☛✔②✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌★ ▲✑✎✘✑✗✏✜✔✎ ✎ ✡✍②✱❈❘✷✦✸✷✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌★ ❏✟②✒✎✑☞❦☛✡✕✖✎✘✔✠❄✗✒✎✏✡✕✎✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳✌★ ❏✟②✒✎✑☞❦☞✟✕✚✡✍✒✑✟✕✒✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✌✥ ❍✟☛✠✡✍✜✍✔☞❦✡✎✙✟✍✎ ✍✔✕✒✏✑✎ ✎ ✡✍✒✎ ✍✔✓✒✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✷✦ ■✕✒✎✔☛☛✑✕✖✔✠✠✑✎✑✟✕✔☛☞✟✕✎ ✍✟☛✒✱✒♠✑✎ ☞✘✡✒✱✡✎ ☞✳✳ ✳ ✳✷✦ ❆☛✑✖✕✑✕✖✎✘✡✔✕✎ ✡✕✕✔✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✷✦ ✢✍✔✕✒✏✑✎ ✎ ✡✍✠✡✒☞✍✑✓✎✑✟✕ ❋✍✟✕✎✒✑✠✡✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳✳ ✳ ✳ ✳✳ ✳ ✳✷✌ ❋✔☞✡❁✒✑✠✡☞✟✕✕✡☞✎ ✟✍✒ ❈✘✔✍✖✡✍✒✟☞❦✡✎✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✷✷ ❉❙❈❂❉✑✍✡☞✎❙✡✍✚✟❈✟✕✎ ✍✟☛❃✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳✷✷ ✏✑✕✑❁❅❙✿☞✟✕✕✡☞✎ ✟✍✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✷✸ ❉✔✎✔✒✟☞❦✡✎✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✷✸ ❈✔✍✠✒☛✟✎❂✠✔✎✔✒✎ ✟✍✔✖✡❃✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✷✸ ❍✡✔✠✒✡✎☞✟✕✕✡☞✎ ✟✍✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳ ✳ ✳✳ ✳ ✳✷✹ ✡✶✎✳…

Text truncated - open the document above for the full version.

51 Receiver initialization not correspond to the product (e.g. a transmitter update fi le instead of a receiver update fi le), the "Product code error" popup window will appear and the update process will not star t. Activate the control labeled "Program". Wait for the progress bar to start. Depending on the speed of the computer being used, this may take several seconds. Now switch on the receiver while holding its SET button down. After a few seconds the "Found target device ..." message will appear in the status display. Now you can release the receiver's button. The actual fi rmware update will begin autonomously after this message has appeared. However, if the receiver is not detected, the "Target device ID not found" popup window will appear. If this process terminates before reaching the 100 % mark, switch off your receiver's power supply then try to start the update process all over again. Do this by performing the above steps again. The status display and progress bar will show you the progress of the fi rmware update. The update is concluded when the text "Complete ... 100 %“ or "Complete!!" appears in the bottom line of the status display. Both LEDs on the receiver will illuminate during the update process. Upon successful conclusion of the update process, the green LED will extinguish and the red LED will begin to blink. Switch the receiver off and remove the interface cable. Repeat this procedure for any other receivers present. Receiver initialization4. Following a successful update process you MUST perform a receiver initialization procedure before using the receiver again. This is necessary for reasons of safety. Do this by pressing and holding the receiver's SET button then switching the receiver's power supply on. Now release the SET button again. When you subsequently switch the receiver on again, the receiver's green LED will illuminate continuously for about 2 or 3 seconds. Except for binding information, all other settings that may have been programmed into the receiver will now be reset to factory defaults and will have to be re-entered again if they are needed. 52 Installation notices In order to prevent uncontrolled movements of servos connected to the receiver during startup always fi rst switch on the transmitter and then the receiver and when fi nished with operation fi rst switch off the receiver and then the transmitter. When programming the transmitter, be sure that electric motors cannot start running without control or that a combustion motor equipped with automatic starting cannot start up unintentionally. To be safe, disconnect the receiver's drive battery or, in the case of a combustion motor, disconnect the fuel supply. Several notices and suggestions for installing remote control components into a model are provided below. Wrap the receiver in a foam rubber pad that is at 1. least 6 mm thick. Attach the foam rubber to the receiver with rubber bands so it will be protected against vibration and/or the jars of a hard landing. All switches must be installed such that they are 2. not affected by exhaust gases or vibration. The switch knob must be freely accessible over its entire range of movement. Mount servos on rubber bushes/spacers with 3. hollow brass bearings to protect them from vibration. Do not tighten the fastening screws down too tight as this would negate the vibration protection to be provided by the rubber bush/ spacer. Only when servo fastening screws are properly tightened will this arrangement provide security and vibration protection for your servos. The fi gure below shows how a servo is mounted properly. The brass bearings are to be pushed into the rubber bushes/spacers from below. Servo mounting lug Retaining screw Rubber grommet Tubular brass spacer Servo arms must be free to move throughout their 4. entire range of motion. Pay attention that there are no objects which could hinder servo arm motion. The sequence in which servos are connected to the receiver depends on the type of model. Follow the connection layouts provided for this on pages 61 and 65. Also observe the safety notices provided on pages 4 ... 9. Installation notices Receiver installation Regardless of which Graupner receiver system you use, the procedure is always the same. Please pay attention that the receiver's antennas must be mounted at least 5 cm away from all large metal parts or any wiring that is not directly routed out of the receiver itself. In addition to steel parts, this also includes carbon fi ber parts, servos, fuel pumps and all kinds of cables etc. Optimally the receiver should be placed at a readily accessible location that is well away from all other equipment. Under no circumstances may servo cables be wrapped around the antennas or routed close to it. Please note that cables are subject to the acceleration forces which occur during fl ight and these forces may cause such cables, to shift in position. Therefore be sure the cables in the vicinity of the antennas are not able to move. Such moving cables can cause reception disturbances. Tests have shown that vertical (upright) antennas provide the best results during wide-range fl ights. In the case of diversity antennas (two antennas), the second antenna should be oriented at a 90° angle to the fi rst antenna. The connectors designated "B + -" on the GR- 32 DUAL HoTT receiver are intended for battery connections. The power supply is bussed across all numbered connections so it can be attached at any of these 16 connectors. However, due to additional voltage losses associated with the traverse connectors, connections 13 through 16 should not be used for connecting the receiver's battery. The function of every individual channel is determined by the transmitter used, not by the receiver. However, channel assignments can be changed in the receiver by programming done in the »Telemetry« menu. Nevertheless, it is recommended this be done on the transmitter side via the "Transmitter output" option, see …

Text truncated - open the document above for the full version.

[Company Header] FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012 (Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Graupner GmbH & Co. KG Address Henriettenstr. 94-96 D-73230 Kirchheim/Teck GERMANY City Kirchheim Country GERMANY request for this certification filing under: Grantee Code Product Number FCC ID:ZKZ-MC-16 ZKZ MC-16 to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Description Operational Description ZKZ-MC-16_CircuitDescription.pdf explaining the functioning of the block diagram Block Diagrams ZKZ-MC-16_Block Diagram.pdf showing the systematic building blocks of the EUT Schematics Diagrams ZKZ-MC-16_Schematic Diagram.pdf showing components, their values and interconnection Bill of Materials List of components used on the PCB’s of the EUT Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) SHEN ZHEN 2012-12-15 Ralf Helbing Head of Development Dept G raupner G mbH & Co. KG

FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 We, undersigned hereby declare, as the applicant of the following radio equipments with FCC ID: ZKZ-MC-16 sold in the USA are factory pre-set to ONLY operate within the FCC certified channels: 2404.056-2474.025 MHz with FCC certified power as tested in the FCC test report. We have ensured in the firmware that end users can not change this parameter of the RF devices. Signed Date: December 26.2012 Function( Head of Development Dept)

EUT EXTERNAL PHOTOS EUT –Top View EUT –Rear View EUT –Side View EUT –Side View

FCC ID Label Sample for FCC ID: ZKZ-MC-16 FCC ID: ZKZ-MC-16

FCC ID Location FCC ID Location

EUT INTERNAL PHOTOGRAPHS EUT –Uncover View EUT –Button PCB View EUT –Button PCB View EUT –PCB View EUT –PCB View EUT –LCD View EUT –Module Antenna View EUT –Module View EUT –Battery View

Number Channel Frequency Number Channel Frequency [0] 512455.772[35] 43 2447.660 [1] 632467.940[36] 67 2471.997 [2] 12405.070[37] 13 2417.239 [3] 202424.337[38] 17 2421.295 [4] 362440.562[39] 31 2435.491 [5] 462450.702[40] 47 2451.716 [6] 642468.955[41] 60 2464.898 [7] 122416.225[42] 9 2413.182 [8] 232427.379[43] 22 2426.365 [9] 392443.604[44] 33 2437.519 [10] 532457.800[45] 45 2449.688 [11] 562460.842[46] 69 2474.025 [12] 72411.154[47] 6 2410.140 [13] 252429.407[48] 19 2423.323 [14] 342438.533[49] 32 2436.505 [15] 552459.828[50] 48 2452.730 [16] 612465.912[51] 58 2462.870 [17] 102414.197[52] 3 2407.098 [18] 182422.309[53] 27 2431.435 [19] 412445.632[54] 28 2432.449 [20] 492453.744[55] 50 2454.758 [21] 592463.884[56] 57 2461.856 [22] 42408.112[57] 11 2415.210 [23] 152419.267[58] 26 2430.421 [24] 402444.618[59] 30 2434.477 [25] 542458.814[60] 52 2456.786 [26] 662470.983[61] 62 2466.927 [27] 82412.169[62] 0 2404.056 [28] 212425.351[63] 16 2420.281 [29] 382442.590[64] 29 2433.463 [30] 442448.674[65] 42 2446.646 [31] 652469.969[66] 68 2473.011 [32] 22406.084[67] 5 2409.126 [33] 142418.253[68] 24 2428.393 [34] 372441.575[69] 35 2439.547 70 Pseudo Random Hopping Channels FCC Hopping Sequence of 2404.056~2474.025

Radio Frequency Exposure Report On Behalf of Graupner GmbH & Co. KG. FCC ID: ZKZ-MC-16 Product Description: Computer System Graupner/SJ HoTT Model No.: MC-16 Supplementary Model: N/A Prepared for: Graupner GmbH & Co. KG. Henriettenstr. 94-96 D-73230 Kirchheim/Teck GERMANY Prepared by: Bontek Compliance Testing Laboratory Ltd 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen, China Tel: 86-755-86337020 Fax: 86-755-86337028 Report No.: BCT12KR-2055E-2 Issue Date: December 9, 2012 Test Date: November 9~December 9, 2012 Tested by: Reviewed by: Lion Cai Kendy Wang Approved by: Tony Wu Report No.: BCT12KR-2055E-2 Page 2 of 5 TABLE OF CONTENTS 1 - GENERAL INFORMATION ....................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................................3 1.2 OBJECTIVE.................................................................................................................................................................3 1.3 GENERAL DESCRIPTION OF TEST..................................................................................................................................4 1.4 HUMAN EXPOSURE ASSESSMENT RESULTS...................................................................................................................4 Report No.: BCT12KR-2055E-2 Page 3 of 5 1 - GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Applicant: Graupner GmbH & Co. KG Address of Applicant: Henriettenstr. 94-96 D-73230 Kirchheim/Teck GERMANY Manufacturer: SJ TECHNOLOGY(SHENZHEN) CO.,LTD Address of Manufacturer: F6, 1 BLDG, A AREA, YINTIANXIFA INDUSTRIAL AREA, XIXIANG TOWN, BAOAN DISTRICT SHENZHEN, GUANGDONG PROVINCE, CHINA General Description of E.U.T Items Description EUT Description: Computer System Graupner/SJ HoTT Model No.: MC-16 Trade Name: HoTT Supplementary Model: N/A Frequency Band: 2404.056 MHz ~ 2474.025 MHz Channel Spacing: 1 MHz Number of Channels: 70 Type of Modulation: FHSS Antenna Type: Built-in Antenna Rated Voltage: Intput: 4.2VDC 0.8A Adapter description: Model: N/A Input: N/A Output: N/A Remark: * The test data gathered are from the production sample provided by the manufacturer. 1.2 Objective The objective of the following report is used to demonstrate that EUT operated in a manner that ensures the public is not exposed to radio frequency energy levels in excess of the relative provisions of FCC 47CFR Part 1.1307 Report No.: BCT12KR-2055E-2 Page 4 of 5 1.3 General Description of Test Items Description EUT Frequency band FHSS: 2.400GHz ~ 2.483GHz WLAN: 2.400GHz ~ 2.483GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others: __________________________ Device category Portable (<20cm separation) Mobile (>20cm separation) Others __________________________ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Others: __________________________ Antenna diversity Single antenna Multiple antennas: Tx diversity Rx diversity Tx/Rx diversity Max. output power 19.89dBm (0.0975W) Antenna gain (Max) 0 dBi (Numeric gain:1) Evaluation applied MPE Evaluation SAR Evaluation Note: 1. The maximum output power is 19.65dBm (0.0923W) at 2404MHz (with 10 numeric antenna gain.) 2. For mobile or fixed location transmitters, no SAR consideration applied. The minimum separation generally be used is at least 20 cm, even if the calculations indicate that the MPE distance would be lesser. 1.4 Human Exposure Assessment Results Report No.: BCT12KR-2055E-2 Page 5 of 5 EUT parameter (data from the separate report) Given Where G: numerical gain of transmitting antenna; TP: Transmitted power in watt; d: distance from the transmitting antenna in meter Max average output power in Watt (TP) 19.89dBm (0.0975W) Antenna gain (G) 0 dBi (Numeric gain: 1) Minimum distance in meter (d) (from transmitting structure to the human body) 20cm (0.2m) Yields E =24.42V/m S=0.1581mW/cm 2 Conclusion: S=0.1836mW/cm2 is significant lower than the 1mW/cm2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW / cm2 even if the calculation indicates that the power density would be larger.)

Test Report of FCC CFR 47 Part 15 Subpart C On Behalf of Graupner GmbH & Co. KG. FCC ID: ZKZ-MC-16 Product Description: Computer System Graupner/SJ HoTT Model No.: MC-16 Supplementary Model: N/A Prepared for: Graupner GmbH & Co. KG. Henriettenstr. 94-96 D-73230 Kirchheim/Teck GERMANY Prepared by: Bontek Compliance Testing Laboratory Ltd 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen, China Tel: 86-755-86337020 Fax: 86-755-86337028 Report No.: BCT12KR-2055E Issue Date: December 10, 2012 Test Date: November 9~December 5, 2012 Tested by: Reviewed by: Lion Cai Kendy Wang Approved by: Tony Wu Report No.: BCT12kR-2055 Page 2 of 40 FCC ID:ZKZ-MC-16 TABLE OF CONTENTS 1. GENERAL INFORMATION................................................................................................................................... 4 1.1 P RODUCT D ESCRIPTION FOR E QUIPMENT U NDER T EST (EUT)......................................................................... 4 1.2 R ELATED S UBMITTAL ( S ) / G RANT ( S ) AND T EST M ETHODOLOGY ....................................................................... 4 1.3 T EST F ACILITY ...................................................................................................................................................... 5 2. SYSTEM TEST CONFIGURATION...................................................................................................................... 6 2.1 EUT C ONFIGURATION .......................................................................................................................................... 6 2.2 EUT E XERCISE .................................................................................................................................................... 6 2.3 G ENERAL T EST P ROCEDURES ............................................................................................................................. 6 2.4 M EASUREMENT U NCERTAINTY ............................................................................................................................ 6 2.5T EST E QUIPMENT L IST AND D ETAILS ................................................................................................................... 7 3. SUMMARY OF TEST RESULTS.......................................................................................................................... 9 4. TEST OF AC POWER LINE CONDUCTED EMISSION................................................................................. 10 4.1 A PPLICABLE S TANDARD ..................................................................................................................................... 10 4.2 T EST S ETUP D IAGRAM ....................................................................................................................................... 10 4.3 T EST R ESULT ..................................................................................................................................................... 10 5. TEST OF HOPPING CHANNEL BANDWIDTH................................................................................................ 13 5.1 A PPLICABLE S TANDARD ..................................................................................................................................... 13 5.2 EUT S ETUP ........................................................................................................................................................ 13 5.3 T EST E QUIPMENT L IST AND D ETAILS ................................................................................................................ 13 5.4 T EST P ROCEDURE ............................................................................................................................................. 13 5.5 T EST R ESULT ..................................................................................................................................................... 14 6. TEST OF HOPPING CHANNEL SEPARATION.............................................................................................. 16 6.1 A PPLICABLE S TANDARD ..................................................................................................................................... 16 6.2 EUT S ETUP ........................................................................................................................................................ 16 6.3 T EST E QUIPMENT L IST AND D ETAILS ................................................................................................................ 16 6.4 T EST P ROCEDURE ............................................................................................................................................. 16 6.5 T EST R ESULT ..................................................................................................................................................... 17 7. TEST OF NUMBER OF HOPPING FREQUENCY........................................................................................... 19 7.1 A PPLICABLE S TANDARD ..................................................................................................................................... 19 7.2 EUT S ETUP ........................................................................................................................................................ 19 7.3 T EST E QUIPMENT L IST AND D ETAILS ................................................................................................................ 19 7.4 T EST P ROCEDURE ............................................................................................................................................. 19 7.5 T EST R ESULT ..................................................................................................................................................... 19 8. TEST OF DWELL TIME OF EACH FREQUENCY.................................…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS Conducted Emission Radiated Emission