ZY4CM07BTubular Motor

ESNLDE MOTIONBLINDS MANUAL setup guide ROMAN - VENETIAN - PLEATED MOTOR CM-07 EN Motion setup guide CM-07.indd 1Motion setup guide CM-07.indd 110-11-2021 14:16:2410-11-2021 14:16:24 Conforms to UL Std. 325 Certified to CSA Std. C22.2#247 Cleaning Follow these general rules when cleaning the outside of the device and its components: Use a damp, soft, lint-free cloth. Avoid getting moisture in openings. Do not use aerosol sprays, solvents, alcohol, or abrasives. Service & Support Do not perform repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. Warranty Service First follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service. Recycle This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collec-tion systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Read the instructions carefully before assembling and using the product. Assembly can be completed by non-professionals. For indoor use only. Young children can strangle themselves with the loop of pull cords, chains and tapes, and cords that operate window coverings. To avoid strangulation and entanglement, keep cords out of reach of young children. Cords may ensnare a child’s neck. Move beds, cots and furniture away from window covering cords. Do not tie cords together. Make sure cords do not twist together and form a loop. WARNING 2 Motion setup guide CM-07.indd 2Motion setup guide CM-07.indd 210-11-2021 14:16:2510-11-2021 14:16:25 Important Safety instructions WARNING: To reduce the risk of severe injury or death, it is important to follow these instructions for personal safety. Save these instructions. Read and follow all installation instructions. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision. Do not allow children to play with fixed controls. Keep remote controls away from children. Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary. This instruction manual is also available on the website. The drive must be disconnected from its power source during cleaning, maintenance and when replacing parts. The A-weighted emission sound pressure level of the drive is equal to or less than 70dB(A). Indoor and household use only. Disconnect the drive from the power supply or switch off the automatic controls when maintenance, such as window cleaning, is being carried out in the vicinity. When operating a biased switch, make sure that other persons are kept away. Do not operate when maintenance, such as window cleaning, is being carried out in the vicinity. The tube motor must only be supplied with safety extra low voltage corresponding to the marking on the appliance. Important Installation instructions WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury. This motor can only be used with soft material for driven parts. Hazardous unprotected moving parts of the drive must be installed higher than 2.5m above the floor or any other level surface that could provide access to it. Install the actuating member of a manual release at a height less than 1.8m. The actuating member of a biased switch is to be located within direct sight of the driven part but away from moving parts. It is to be installed at a minimum height of 1.5m and not accessible to the public. The mass and the dimension of the driven part must be compatible with the rated torque and rated operating time. Fixed controls have to be clearly visible after installation. The driven part must be compatible with the rated torque (0.8Nm) and rated operating time (12 min). The drive is intended to be installed at a height of at least 2.5m above the floor or any other accessible level surface. All-pole disconnection switches must be incorporated in the fixed wiring in accordance with the wiring rules. The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance. Before installing the drive, remove any unnecessary cords or components and disable any equipment not needed for powered operation. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. 3 ENGLISH Motion setup guide CM-07.indd 3Motion setup guide CM-07.indd 310-11-2021 14:16:2510-11-2021 14:16:25 FCC Manual FCC ID: ZY4CM07B Regulatory Information 1 FCC Information for User This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. 2 FCC Electronic Emission Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. 3 FCC Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a class …

Text truncated - open the document above for the full version.

Coulisse B.V. Date (08/09/2022) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request FCC ID: ZY4CM07B Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, (Coulisse B.V.) hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics/PCB Layout Parts List Block Diagram Operation Description (Coulisse B.V.) alsohereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of (up to 180) days: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Manager Engineering/ Bas Klein Tuente Telephone Number: +31 547855555 FAX Number: +31 547855550 Email: [email protected]

Page 1 of 2 External Photos for CM-07 Details of: Front view Details of: Rear view Page 2 of 2 Details of: Side view Details of: Side view

538-77-04 DV24WF/CB-0.8/34 (MOTION 蓝牙系列) 备注 538-77-04 538# 125*27.5mm（长*宽） UV油墨 黑白印刷 A-00 2021.11.29 贴产品 方肖酉 魏娟 校对 设计 适用产品 材 质 油 墨 是否覆膜 印刷工艺 是否含流水码 或条形码 审定 版本 日期 制图 颜 色 尺 寸0.1±0.01mm（厚度） 使用规范 工艺描述 客户号 杜亚机电 铭牌 JS-6-15 C:0% M:0% Y:0% K:100% 图纸认证说明 (此尺寸为本图内1:1尺寸) 5mm 7mm 7mm 5mm 铭牌内容客户要求 覆光膜 进口透明材质 Label Location

Page 1 of 5 Internal Photos for CM-07 Details of: Internal view Details of: Internal view view Page 2 of 5 Details of: PCB view 1 Details of: PCB view 1 Page 3 of 5 Details of: PCB view 2 Details of: PCB view 2 Page 4 of 5 Details of: PCB view 3 Details of: PCB view 3 Page 5 of 5 Details of: Motor view Details of: Motor view

Report Number: 68.910.22.0032.01A EMC_SZ_FR_23.03 MPE Release 2022-05-06 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 9 FCC Maximum Permissible Exposure (MPE) Estimation Report Report Number : 68.910.22.0032.01A Date of Issue: 2022-06-21 Model / HVIN : CM-07 Product Type : Tubular Motor Applicant : Coulisse B.V. Address : Vonderweg 48, Enter, 7468 DC, Netherlands Manufacturer : Ningbo Dooya Mechanic & Electronic Technology Co., Ltd. Address : No.168 Shengguang Road, Luotuo, Zhenhai, 315202 Ningbo, Zhejiang province, PEOPLE'S REPUBLIC OF CHINA Test Result : ◼ Positive  Negative Total pages including Appendices : 9 Any use for advertising purposes must be granted in writing. This technical report may only be quoted in full. This report is the result of a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production. For further details, please see testing and certification regulation chapter A-3.4. Report Number: 68.910.22.0032.01A EMC_SZ_FR_23.03 MPE Release 2022-05-06 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 9 1 Table of Contents 1 Table of Contents ...................................................................................................................................................2 2 Details about the Test Laboratory ..........................................................................................................................3 3 Description of the Equipment Under Test ..............................................................................................................4 4 Test Specifications .................................................................................................................................................5 5 General Information ...............................................................................................................................................6 6 RF Exposure Requirements ...................................................................................................................................7 7 FCC MPE Limits.....................................................................................................................................................8 8 RF Exposure Evaluation (FCC) .............................................................................................................................9 8.1 Calculation of Power Density for Single Chain Transmitters ........................................................................9 8.2 Calculation of Simultaneous Transmission ...................................................................................................9 8.3 Conclusion .....................................................................................................................................................9 Report Number: 68.910.22.0032.01A EMC_SZ_FR_23.03 MPE Release 2022-05-06 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 9 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, 518052 China FCC Designation Number: CN5009 FCC Registration No.: 514049 Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Report Number: 68.910.22.0032.01A EMC_SZ_FR_23.03 MPE Release 2022-05-06 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 4 of 9 3 Description of the Equipment Under Test Product: Tubular Motor Model no.: CM-07 FCC ID: ZY4CM07B Options and accessories: N/A Rating: 12V; 1A, 12W RF Transmission Frequency: 2402-2480MHz for BLE 433.925MHz for SRD Antenna Type: Monopole Antenna Antenna Gain: 0dBi max for 2.4GHz BLE; -4.0dBi for 433.925 MHz Description of the EUT: The Equipment Under Test (EUT) is a Tubular Motor supports 2.4GHz BLE/433.925MHz SRD functions. NOTE 1: The above EUT’s information is declared by manufacturer. Please refer to the specifications or user’s manual for more detailed description. Report Number: 68.910.22.0032.01A EMC_SZ_FR_23.03 MPE Release 2022-05-06 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 5 of 9 4 Test Specifications Test Standards ANSI Std C95.1-1992 Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz – 300 GHz.(IEEE Std C95.1-1991) KDB 447498 D01 General RF Exposure Guidance v06 Report Number: 68.910.22.0032.01A EMC_SZ_FR_23.03 MPE Release 2022-05-06 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 6 of 9 5 General Information Any use for advertising purposes must be granted in writing. This technical report may only be quoted in full. This report is the result of a single examination of the object in que…

Text truncated - open the document above for the full version.

Report Number: 68.710.22.0060.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 19 FCC - TEST REPORT Report Number : 68.710.22.0060.01 Date of Issue: 2022-06-21 Model : CM-07 Product Type : Tubular Motor Applicant : Coulisse B.V. Address : Vonderweg 48, Enter, 7468 DC, Netherlands Production Facility : Ningbo Dooya Mechanic & Electronic Technology Co., Ltd. Address : No.168 Shengguang Road, Luotuo, Zhenhai, 315202 Ningbo, Zhejiang province, PEOPLE'S REPUBLIC OF CHINA Test Result : ◼ Positive  Negative Total pages including Appendices : 19 Any use for advertising purposes must be granted in writing. This technical report may only be quoted in full. This report is the result of a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production. For further details, please see testing and certification regulation chapter A-3.4. Report Number: 68.710.22.0060.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 19 1 Table of Contents 1 Table of Contents .................................................................................................................. 2 2 Details about the Test Laboratory ......................................................................................... 3 3 Description of the Equipment Under Test .............................................................................. 4 4 Summary of Test Standards .................................................................................................. 5 5 Summary of Test Results ...................................................................................................... 6 6 General Remarks .................................................................................................................. 7 7 Systems test configuration .................................................................................................... 8 8 Test Setups ........................................................................................................................... 9 9 Test Methodology ................................................................................................................ 10 9.1 Conducted Emission ..................................................................................................... 10 9.2 Radiated Emission ........................................................................................................ 13 9.3 Bandwidth Measurement .............................................................................................. 16 9.4 Deactivation Time ......................................................................................................... 17 10 Test Equipment List ......................................................................................................... 18 11 System Measurement Uncertainty ................................................................................... 19 Report Number: 68.710.22.0060.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 19 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, 518052 China FCC Designation Number: CN5009 FCC Registration No.: 514049 Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Report Number: 68.710.22.0060.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 4 of 19 3 Description of the Equipment Under Test Product: Tubular Motor Model no.: CM-07 FCC ID: ZY4CM07B Rating: 12V; 1A, 12W RF Transmission Frequency: 433.925MHz Modulation: FSK Antenna Type: Monopole Antenna Antenna Gain: -4.0dBi for 433.925 MHz Description of the EUT: The Equipment Under Test (EUT) is a Tubular Motor supports 2.4GHz BLE/433.925MHz SRD functions. Report Number: 68.710.22.0060.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 5 of 19 4 Summary of Test Standards Test Standards FCC Part 15 Subpart C 10-1-2020 Edition PART 15 - RADIO FREQUENCY DEVICES Subpart C - Intentional Radiators All the test methods were according to ANSI C63.10. Report Number: 68.710.22.0060.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 6 of 19 5 Summary of Test Results Technical Requirements FCC Part 15 Subpart C Test Condition Pages Test Site Test Result §15.207 Conducted emission AC power port 10 Site 1 Pass §15.205, §15.209, 15.35 (c) §15.231 (b) Radiated Emission, 30MHz to 4.5GHz 13 Site 1 Pass §15.231(c) Bandwidth M…

Text truncated - open the document above for the full version.

Page 1 of 2 Test Setup Photos for CM-07 Conducted Emission test Radiated Emission test (30MHz to 1000MHz) Page 2 of 2 Radiated Emission test (1000MHz to 18000MHz) Radiated Emission test (Above 18000MHz)