2AAOY-MUD6SPBTBluetooth Speaker

FCC ID: 2AAOY-MUD6SPBT Product name: Bluetooth Speaker

External Photo

ATT Product Service Co., Ltd. No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] Label and label location

Internal Photo

RF Exposure evaluation According to KDB 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√ f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Worse case is as below: [2402 MHz 0.51dBm（1.125mW）output power] (1.125mW /5mm) ·[√2.402(GHz)]= 0.35<3.0 for 1-g SAR Then SAR evaluation is not required

Report No.: 15FAS03022 111 of 69 ATT Product Service Co., Ltd (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] Rev. 1.0 FCC CERTIFICATION TEST REPORT For FCC ID ˖2AAOY-MUD6SPBT Report Reference No....................... : 15FAS03022 11 Date of issue.................................... : 2015-03-31 Testing Laboratory........................... : ATT Product Service Co., Ltd. Address............................................ : No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Applicant’s name ............................. : Mitek Corp Address............................................ : 1 Mitek Plaza Winslow, IL 61089 Manufacturer.................................... : Mitek Corp Test specification: Test item description........................ : Bluetooth Speaker Trade Mark ...................................... : -- Model/Type reference .................... : MUD6SPBT Ratings............................................. : I/P: 12Vdc full battery is used to supply power Responsible Engineer Approved by ʳ (Rock Huang/Engineer) (King Wang/EMC Manger) Report No.: 15FAS03022 112 of 69 ATT Product Service Co., Ltd (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial Park, ChangAn Town, DongGuan City, GuangDong, China. Phone: 86-769-8509 8000; Fax: 86-769-8509 8777 E-mail:[email protected] Rev. 1.0 TABLE OF CONTENTS 1. SUMMARY OF TEST RESULTS .....................................................................................................5 2. GENERAL TEST INFORMATION....................................................................................................6 2.1. DESCRIPTION OF EUT .................................................................................................................. 6 2.2. ACCESSORIES OF EUT ................................................................................................................. 6 2.3. ASSISTANT EQUIPMENT USED FOR TEST ................................................................................. 6 2.4. BLOCK DIAGRAM OF EUT CONFIGURATION FOR TEST......................................................... 7 2.5. TEST ENVIRONMENT CONDITIONS............................................................................................. 7 2.6. MEASUREMENT UNCERTAINTY...................................................................................................8 3. 20DB BANDWIDTH ......................................................................................................................... 9 3.1. TEST EQUIPMENT.......................................................................................................................... 9 3.2. BLOCK DIAGRAM OF TEST SETUP .............................................................................................. 9 3.3. LIMITS .............................................................................................................................................. 9 3.4. TEST PROCEDURE........................................................................................................................ 9 3.5. TEST RESULT ............................................................................................................................... 10 3.6. ORIGINAL TEST DATA ................................................................................................................. 10 4. CARRIER FREQUENCY SEPARATION TEST ............................................................................... 15 4.1.THE REQUIREMENT FOR SECTION 15.247(A)(1)....................................................................... 15 4.2.EUT CONFIGURATION ON MEASUREMENT............................................................................... 15 4.3.OPERATING CONDITION OF EUT ................................................................................................ 15 4.4.TEST PROCEDURE........................................................................................................................ 15 4.5.TEST RESULT................................................................................................................................. 16 5. NUMBER OF HOPPING FREQUENCY TEST................................................................................. 22 5.1.THE REQUIREMENT FOR SECTION 15.247(A)(1)(III) ................................................................. 22 5.2.EUT CONFIGURATION ON MEASUREMENT............................................................................... 22 5.3.OPERATING CONDITION OF EUT ................................................................................................ 22 5.4.TEST PROCEDURE........................................................................................................................ 22 5.5.TEST RESULT................................................................................................................................. 23 6. DWELL TIME TEST.......................................................................................................................... 24 6.1.THE REQUIREMENT FOR SECTION 15.247(A)(1)(III) ................................................................. 24 6.2.EUT CONFIGURATION ON MEASUREMENT............................................................................... 24 6.3.OPERATING CONDITION OF EUT ................................................................................................ 24 6.4.TEST PROCEDURE........................................................................................................................ 24 6.5.TEST RESULT................................................................................................................................. 25 Report No.: 15FAS03022 113 of 69 ATT Product Service Co., Ltd (CBTL Lab of UL/Demko) No. 3, ChangLianShan Industrial…

Text truncated - open the document above for the full version.

Setup Photo Radiated Emission (Below 1GHz) Radiated Emission (Above 1GHz)