2AEBL-51012PPushbutton module, with NFC/IC card reader

English Pushbuttons module Warning Risk of death and fire due to electrical voltage of 100- 240V.  Work on the 100-240V supply system may only be performed by authorized electricians!  Disconnect the mains power supply prior to installa- tion and/or disassembly!  Please read the mounting instructions carefully and keep them for future use.  Detailed user manual is available via the link in chapter "Service" or by scanning the QR codes (device with corresponding software is required). Intended use Round pushbutton module works with audio module, 1/2/3 round pushbutton and NFC/IC card reader is optional. Backlight of name- plates is controlled by audio module, and nameplates can be re- placed manually. Note: Round pushbutton module can only be assembled with the cover frame which is manufactured after Oct. 2015. Technical data Bus voltage 20-30V DC Protection (cover frame assembled) IP54 Operating temperature -40 °C – +70 °C -40 °F– 158 °F Addressing .1. For outdoor stations With the selector switch 1 set the address of the outdoor station (1 to 9). .2. For indoor stations With the left jumper 2 set the address of the default outdoor station (1 to 9). Then use the other three jumpers 3 to set the address (hundreds, tens and units digits e.g. 001) of the indoor station. Connection 1 Connector for previous module 2 Connector for next module 3 "Program" button 4 Connector for device software update 5 Connector for wiegand output. Default format is 26bits, also it can be extended to 34bits. Operation 1. Regardless of the structure of pushbutton module, the button num- bers are listed from top to bottom. 2. Lighting switch/ call guard unit function is always assigned to the 1st/2nd button, which is set by audio module. 3. User names can be printed by labeling tool. (Detailed instruction is contained at the link in chapter "Service") 4. For pushbutton module with NFC/IC card reader, it supports NFC/IC card, also mobile phone with NFC function is acceptable ("Door open" APP is necessary). Programming Function Command LED Create admin card Swipe card 1x Green Enter Settings Swipe admin card 1x Orange The system will take the first card swiped after powering up the sys- tem within 60s to be the admin card. After enter Settings, following functionalities can be implemented: Function Command LED Enroll user Swipe admin card 1x Orange flash 1x Swipe card (new user) 1x Green Delete user Swipe admin card 2x Orange flash 2x Swipe card (user x) 1x Green Enroll new admin Swipe admin card 3x Orange flash 3x Swipe card (new admin) 1x Green Delete Admin Swipe admin card 4x Orange flash 4x Swipe card (admin x) 1x Green Delete all users Swipe admin card 5x Orange flash quickly Swipe admin card 1x Green During setting, please swipe the same admin card. Function Command LED Exit Settings Swipe admin card 1x or no cards swiped within 15 seconds —— Open a door Open a door: Swipe the enrolled keycard or mobile phone with "Door open" App installed. For the other detailed information, please see the detailed outdoor station manual. Service ABB Genway Xiamen Electrical Equipment CO., LTD. http://new.abb.com/low-voltage/products/residential-products/door- communication Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is con- nected Consult the dealer or an experienced radio/TV technician for help. Español Módulo Pulsador Advertencia   Riesgo de muerte y fuego causado por voltaje eléctrico de 100-240V  ¡Sólo se permite que electricistas autorizados operan el sistema de potencia de operación de 100-240V!  ¡Desconectar del fuente de potencia principal antes de instalación y/o desmontaje!   Por favor, lea las instrucciones de montaje y guárdelas para ser usada en el futuro.  El manual de usuario puede ser descargado en www.abb.es. Uso indicado El módulo pulsador redondo funciona con un módulo de audio, 1/2/3 pulsadores redondos y un lector de tarjetas NFC/IC. Luz de fondo de las placas de identificación es controlada por el módulo de audio, y las placas de identificación se pueden reemplazar manualmente. Nota: El módulo de pulsador redondo sólo puede ser montado con un marco de cubierta fabricado después de octubre 2015. Datos técnicos Tensión de bus 20-30V CC Protección (marco de la tapa montada) IP54 Temperatura de fun- cionamiento -40 °C – +70 °C -40 °F– 158 °F Direccionamiento .1. Para estaciones exteriores Con el conmutador-selector 1 configure la dirección de la estación exterior (de 1 a 9). .2. Para estaciones interiores Con el puente izquierdo 2 configure la dirección de la estación exte- rior pre-definida (de 1 a 9). A continuación utilice los otros tres puentes 3 para establecer la di- rección (dígitos de los centenares, decenas y unidades, por ejemplo 001) de la estación interior. Conexión 1 Conector para el módulo anterior 2 Conector para el siguiente módulo 3 Botón "Programa" 4 Conector para la actualización del software del dispositivo 5 Conector para la salida Wiegand. El formato predefinido es 26 bits, también puede extenderse hasta 34 bits. Funcionamiento 1. Independientement…

Text truncated - open the document above for the full version.

Date: December 10, 2015 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, We, ABB Genway Xiamen Electrical Equipment Co.,Ltd, Room 501-1,No.12-14,3rd Chuang Xin Road,Torch High Technology Development Zone, hereby authorize TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building, 163 Pingyun Rd, Huangpu West Ave. Guangzhou 510656 P. R. China Peter Jia Phone: +86 20 3815 3243 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C 862 because of conviction for possession or distribution of controlled substance. This authorization is application to product: Product name: Mini video outdoor station Model name: M2131.P.-. FCC ID: 2AEBL- M2131 Product name: Pushbutton module, with NFC/IC card reader Model name: 51012P. FCC ID: 2AEBL- 51012P This authorization expires one year from the current date. Yours sincerely, Signature: Signed by (printed name): ShanshanWang Email: [email protected] Date: December 10, 2015

Date: December 10, 2015 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request Product name: Mini video outdoor station Model name: M2131.P.-. FCC ID: 2AEBL- M2131 Product name: Pushbutton module, with NFC/IC card reader Model name: 51012P. FCC ID: 2AEBL- 51012P Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, ABB Genway Xiamen Electrical Equipment Co.,Ltd, Room 501-1,No.12-14,3rd Chuang Xin Road,Torch High Technology Development Zone, on behalf of Icon Health & Fitness hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics PCB layout Parts List Block Diagrams The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Signature: Signed by (printed name): ShanshanWang Email: [email protected] Date: December 10, 2015

Report Number: 64.790.15.03715.01 Page B1 of B7 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 External photos Front View Back view Report Number: 64.790.15.03715.01 Page B2 of B7 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 Side view Report Number: 64.790.15.03715.01 Page B3 of B7 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Report Number: 64.790.15.03715.01 Page B4 of B7 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 Internal photos Report Number: 64.790.15.03715.01 Page B5 of B7 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 Report Number: 64.790.15.03715.01 Page B6 of B7 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 Report Number: 64.790.15.03715.01 Page B7 of B7 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 Antenna photo

© ABB Group Operation Description Name：Pushbutton module, with NFC/IC card reader Model：51012P. The push button & IC card reader module always works with other modules in the outdoor station. The module uses the STM32F051R8T6 as the microcontroller. The module gets DC5V power supply from other module and can transfer the power supply to another module through interface1 and interface2. The module can also communicate with other modules through interface1 and interface2. The module has some buttons for calling , and support RFID proximity reader for IC card through the IC card reader circuit whose operating frequence is 13.56MHz. The module has a Wiegand output interface to connect to the rest of an electronic entry system. The module has a SPI flash to store the character library, card numbers and name list. The module has a software update interface and a reset button. The modulation type is ASK using PCB layout loop antenna.

Report Number: 64.790.15.03715.01-RF Exposure Page 1 of 2 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 R F E x p o s u r e C o m p l i a n c e R e p o r t Model : 51012P. FCC ID : 2AEBL-51012P Product Type : Pushbutton module, with NFC/IC card reader Applicant : ABB Genway Xiamen Electrical Equipment Co.,Ltd Address : Room 501-1,No.12-14,3rd Chuang Xin Road,Torch High Technology Development Zone,Xiamen S.E.Z,Fujian Province,P.R.China Production Facility : ABB Genway Xiamen Electrical Equipment Co.,Ltd Address : NO.7 Fangshan South Road,Torch High Technology Development Zone (Xiang An) Industrial Zone,Xiamen S.E.Z,Fujian Province,P.R.China Test Result :  COMPLIED Total pages including Appendices : 2 The test result only corresponds to the tested sample. It is not permitted to copy this report, in part or in full, without the permission of the test laboratory. Prepared by Approved by Peter Jia Celia Xiang Report Number: 64.790.15.03715.01-RF Exposure Page 2 of 2 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 RF Exposure Compliance Requirement SAR exclusion justification in accordance to KDB 447498 D01 Section 4.3.1: EIRP power = 5.6 x 10 -7 mW [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 [(5.6 x 10 -7 , mW)/(5, mm)] · [√0.01356(GHz)] ≤ 3.0 1.3 x 10 -8 ≤ 3.0 Therefore the device meets the FCC SAR exemption requirements

Report Number: 64.790.15.03715.01 Page 1 of 21 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 FCC - TEST REPORT Report Number : 64.790.15.03715.01 Date of Issue: 2015-12-15 Model : 51012P. Product Type : Pushbutton module, with NFC/IC card reader Applicant : ABB Genway Xiamen Electrical Equipment Co.,Ltd Address : Room 501-1,No.12-14,3rd Chuang Xin Road,Torch High Technology Development Zone,Xiamen S.E.Z,Fujian Province,P.R.China Production Facility : ABB Genway Xiamen Electrical Equipment Co.,Ltd Address : NO.7 Fangshan South Road,Torch High Technology Development Zone (Xiang An) Industrial Zone,Xiamen S.E.Z,Fujian Province,P.R.China Test Result :  Positive  Negative Total pages including Appendices : 30 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval Report Number: 64.790.15.03715.01 Page 2 of 21 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 1 Table of Contents 1 Table of Contents ..................................................................................................................................................2 2 Details about the Test Laboratory .........................................................................................................................3 3 Description of the Equipment Under Test .............................................................................................................4 4 Summary of Test Standards ..................................................................................................................................5 5 Summary of Test Results ......................................................................................................................................5 6 General Remarks ...................................................................................................................................................6 7 Test Setups ............................................................................................................................................................7 8 Test Methodology ..................................................................................................................................................8 8.1 Conducted Emission ......................................................................................................................................8 8.2 Radiated Emission .........................................................................................................................................8 8.3 Field Strength Calculation ..............................................................................................................................8 9 Systems test configuration ....................................................................................................................................9 10 Technical Requirement ....................................................................................................................................... 10 10.1 Conducted Emission Measurement ............................................................................................................ 10 10.2 Filed Strength Measurement ....................................................................................................................... 15 10.3 Frequency Stability...................................................................................................................................... 18 10.4 Occupied Bandwidth ................................................................................................................................... 19 11 Test Equipment List ............................................................................................................................................ 21 12 System Measurement Uncertainty ..................................................................................................................... 21 13 Appendix A – Setup Photos .......................................................................................................................... A1-A2 14 Appendix B – EUT Photos ............................................................................................................................ B1-B7 Report Number: 64.790.15.03715.01 Page 3 of 21 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 2 Details about the Test Laboratory D…

Text truncated - open the document above for the full version.

Report Number: 64.790.15.03715.01 Page A1 of A2 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 Setup photo of radiated emission (9KHz-30MHz) Setup photo of radiated emission (30MHz-1GHz) Report Number: 64.790.15.03715.01 Page A2 of A2 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F,Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478 Setup photo of conducted emission (150KHz-30MHz)