2ASIVPGD698Lockly Guard Vision

USER MANUAL INTERCONNECTED EDITION VISION DUO (698D) LATCH EDITION VISION (698L) FOR COMMERCIAL USE & PROFESSIONAL INSTALLATION WWW.LOCKLYPRO.COM PGD698D / PGD698L Control No. XXXX ERP机型：PL45D1UQ-GL-SMT00010A-V1 Designed: 曹显贵Date：2023-02-20 描述: 说明书:PL45D1UQ/PGD698DW,SMT000,REV.A(UMPGD69820230220),140x190mm, 8 0g书纸,双面印单黑，20页40面装订本，RoHS2.0,REACH,Prop65，POPs，PAHs ERP P/N： REV：0.5 KYMC 7540C Table of Contents TABLE OF CONTENTS For additional support, visit http:// locklypro.com/support or email [email protected] Section 1 - Product Highlights 1.1 Product Features Section 2 - Product Overview 2.1 Product Overview - Exterior 2.2 Product Overview - Interior 2.3 Understanding Your New Lock 2.4 Rebooting Your Lock 2.5 Low Battery 2.6 Changing The Battery Section 3 - Using Your Smart Lock 3.1 Configuring Access 3.2 Entering Programming Mode 3.3 Pairing to a New Mobile Device 3.4 Adding an Access Code 3.5 Checking/Deleting an Access Code 3.6 Adding a Fingerprint 3.7 Adding/Deleting Fingerprints 3.8 Fingerprint Scanning Directions 3.9 Fingerprint Scanning Tips & Troubleshoot 3.10 Adding an RFID card 3.11 Checking/Deleting an RFID Card Section 4 - Locking and Unlocking 4.1 Unlocking with Access Codes 4.2 Unlocking with Fingerprints 4.3 Unlocking with RFID 4.4 Locking/Unlocking with Physical Key 4.5 Locking/Unlocking with App 4.6 Unlock with QR Code 4.7 Locking/Unlocking with Door Handle 4.8 Safe Mode - Overview 4.9 Rain Mode 4.10 Shine Mode 4.11 Welcome Mode Section 5 - Video Doorbell 5.1 Video Doorbell Section 6 - Advanced Features 6.1 Offline Access Code (OAC) 6.2 Sub Admin Access Section 7 - Re-keying 7.1 Re-keying Section 8 - Important Notes 8.1 Important Notes Section 9 - Maintenance and Cleaning 9.1 Cleaning 9.2 Calibrating the Lock Section 10 - Safety Precautions 10.1 Safety Precautions 1 2 3 4 5 6 7 8 9 10 11 11 12 13 14 15 15 17 17 19 20 20 21 22 22 23 25 26 26 27 31 32 32 33 34 34 35 1.1 Product Features 1 SECTION 1.1 Video Monitoring and Recording See who's at your front door with Live View camera streaming, real-time high-resolution video from your smartphone. Video recordings are stored locally with no monthly fees. Patented Hack-Proof PIN Genie Keypad Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button. Users can press any button showing their number. Location of the numbers are always different everytime someone uses the keypad, making it hard for prying eyes to guess the correct code. Multiple Access Codes & Monitoring Store up to 37 Access Codes for family, friends and guests, as well as monitor entry and exit records. Advanced 3D Fingerprint Recognition Biometric Fingerprint Recognition protocol allows up to 99 registered fingerprints to be used and accepts only actual fingerprints - preventing lifted prints from being used. Live Monitoring Through your smartphone, monitor door access from anywhere in the world and securely control who comes and goes with the Vision Connect Hub. (PGH123X-Vision Connect Hub) . RFID Card Access Supports up of 999 MIFARE RFID cards for quick and easy access. Offline Access Code ™ (OAC) The offline access code can allow owners to issue access codes, set the allowed access duration, all without Locky Guard ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web. Auto-Lock Users no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Locky Guard will automatically auto-lock the door based on your customized timing set between 5-300 seconds. Backup Keys and 9V Battery Socket The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the key pad in case your smart lock runs out of battery. 2.1 Product Overview - Exterior Key Hole Cover 9V Battery Backup Socket Key Hole Touchscreen Keypad Buttons Battery Indicator Welcome/Safe Mode OK Button Video Doorbell Light Indicator Bluetooth Icon Exterior Handle Fingerprint Sensor Reboot Doorbell Button Speaker Video Camera Microphone 2 SECTION 2.1 RFID Card Reader SECTION 2.23 2.2 Product Overview - Interior Battery Cover Battery Cover Screw Reset Button Interior Handle Program Button Battery Compartment Operated by 2 x 4 x AA Alkaline Batteries (Included) Low Battery Indicator/ Door Lock Button 2.3 Understanding Your New Lock After the installation of your new Lockly Guard ™ Vision, understanding some key functions of operating your smart lock is important. The next sections will walk you through configuring Access Codes, adding fingerprints, RFID cards, video doorbell recording, rebooting, setting advanced features on the App, configuring Offline Access Code ™ (OAC) and other features of your lock. For any questions you can always visit http://Locklypro.com/help for assistance. Don’t forget that in order for Lockly Guard™ Vision, to work with full features, it is required to pair it with the LocklyPro Commercial App available for both iOS and Android ™ smart devices. Please download the app by visiting the link below. 4SECTION 2.3 Scan or visit Locklypro.com/app SECTION 2.45 2.4 Rebooting Your Lock Reboot Button NOTICE Reboot Lockly Guard in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly Guard. Press and release the reboot button when you want to reboot the lock. Your Lockly Guard will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly Guard lock. The reboot button is located in the middle of the two 9V battery backup sockets. You will need something small such as a paperclip, to press the reboot button. Insert the paperclip and press down firmly and let go. Your screen should restart and the lock should reboot automat…

Text truncated - open the document above for the full version.

PIN Genie Inc, DBA LOCKLY. 2023-03-17 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2ASIVPGD698) The applicant: PIN Genie Inc, DBA LOCKLY. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Print name: Cindy zhou Title: COO Signature: PIN Genie Inc, DBA LOCKLY. 2023-03-14 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2ASIVPGD698) The applicant: PIN Genie Inc, DBA LOCKLY. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Print name: Cindy zhou Title: COO Signature:

Attestation Statements -US agent 2023-03-09 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2ASIVPGD698) PIN Genie Inc, DBA LOCKLY., the undersigned, hereby authorize (PIN Genie Inc, DBA LOCKLY.) to act as our designated U.S. agent for service of process, PIN Genie Inc, DBA LOCKLY. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (PIN Genie Inc, DBA LOCKLY.) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information： Company name: PIN Genie Inc, DBA LOCKLY. Address: 676 Transfer Rd., St. Paul, MN 55114 FRN: 0028246908 Contact Name: Cindy zhou Telephone No: 4159109522 Email: [email protected] Signature [name] ： Cindy zhou U.S. Agent Information: Company name: PIN Genie Inc, DBA LOCKLY. Address: 676 Transfer Rd., St. Paul, MN 55114 FRN: 0028246908 Contact Name: Cindy zhou Telephone No: 4159109522 Email: [email protected] Signature [name] ：Cindy zhou

PINGenieInc,DBALOCKLY. AgentAuthorizationLetter 2023-03-17 EurofinsElectricalandElectronicTestingNA,Inc. 914W.PatapscoAvenue Baltimore,MD21230 USA RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorize(TheHongKongStandardsandTestingCentre Limited)toactonourbehalfinallmattersrelatingtoapplicationforequipmentauthorization, includingthesigningofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuse Actof1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Printname:Cindyzhou Title:COO Signature:

Updated on 2005/02/07 by Kally Chan PIN Genie Inc, DBA LOCKLY. To : STC (DongGuan) COMPANY LIMITED DECLARATION OF IDENTITY Hereby we: PIN Genie Inc, DBA LOCKLY. (Name of Manufacturer) Basic Model Number: PGD698D （HVIN: PGD698） Basic Brand Name: LOCKLY Basic Product Name: Lockly Guard Vision Duo Basic Test Report Application Number: Declare the Circuit, PCB Layout, Electrical Parts and Outlook of the following product(s) are identical to the basic model: New / Additional Model Number(s): PGD698L（HVIN: PGD698） New / Additional Brand Name(s): New / Additional Product Name: Except the following(s) : Door handle of Model：PGD698L is shorter than model: PGD698D. The non-RF boards, circuitry, exterior casing and color are no difference. We don't ave any of these devices been previously delisted from REL for non-compliance or the application rejected by ISED/CB. The length of the handle is different in order to apply to different doors,so wehave made a model distinction to make it convenient for customers to choose and purchase. Remarks: Signature with Company Chop : Printed Name : Cindy zhou DATE: 2023/3/20 MANUFACTURER: Smart Electronic Industrial (Dongguan) Co., Ltd Address : Qing Long Road, Long Jian Tian Village, Huang Jiang Town, Dong Guan, Guang Dong, China

PIN Genie Inc, DBA LOCKLY. Long Term Confidentiality Request Letter Date: 2023-03-17 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Lockly Guard Vision MODEL: PGD698D, PGD698L FCC ID: 2ASIVPGD698 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (block diagram/schematics /operational description ) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Print name: Cindy zhou Title: COO Signature:

1 View of The Product View of The Product model:PGD698D IC: 25517-PGD698 FCC ID: 2ASIVPGD698 External Photo 2 View of The Product View of The Product 3 View of The Product View of The Product 4 View of The Product View of The Product 5 View of The Product View of The Product 6 View of The Product View of The Product 7 View of The Product View of The Product

Location:

1 Internal Photo FCC ID: 2ASIVPGD698 IC: 25517-PGD698 Model：PGD698D & PGD698L Inside View of The Product Inner Circuit Top View 2 Inner Circuit Bottom View Inner Circuit Top View 3 Inner Circuit Bottom View Inner Circuit Top View 4 Inner Circuit Top View Inner Circuit Bottom View 5 Inner Circuit Top View Inner Circuit Bottom View 6 Inner Circuit Bottom View Inside View of The Product 7 Inner Circuit Bottom View Inner Circuit Top View 8 Inner Circuit Bottom View Inner Circuit Top View 9 Inner Circuit Bottom View Inner Circuit Top View 10 View of BT antenna View of WIRELESS antenna 11 View of RFID antenna View of battery（AA x4）x2

RF Exposure Test Requirement: FCC 47CFR 15.247(i) FCC ID: 2ASIVPGD698 Test Date: 2023-03-21 Mode of Operation: BT Tx mode / Wireless mode / RFID Requirements: In 15.247(i), an equipment shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the limits in §§ 1.1307. Applications to the Commission for construction permits, licenses to transmit or renewals thereof, equipment authorizations or modifications in existing facilities must contain a statement confirming compliance with the limits unless the facility, operation, or transmitter is categorically excluded, as discussed below. Technical information showing the basis for this statement must be submitted to the Commission upon request. According to KDB447498 D04 General RF Exposure Guidance v01, Appendix B B.2 Blanket 1 mW Blanket Exemption The 1 mW Blanket Exemption of § 1.1307(b)(3)(i)(A) applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power of no more than 1mW, regardless of separation distance. Test Result of RFID mode: PASS The Maximum ERP = 0.0000018mW (at frequency = 13.56MHz) < 1mW According to KDB447498 D04 General RF Exposure Guidance v01, Appendix B Exemptions for Single RF Sources, B.3 MPE-based Exemption Test Result of BT Tx mode(DTS): PASS RF Exposure Evaluation The Maximum ERP = 0.5593711mW (at frequency = 2.402 GHz ) SAR Test Exclusion Thresholds=768mW, The test separation distances is 20 cm Test Result of Wireless mode: PASS RF Exposure Evaluation The Maximum ERP = 78.1627805mW (at frequency = 2.40301 GHz ) SAR Test Exclusion Thresholds=768mW, The test separation distances is 20 cm For Multiple RF sources: FCC Rule Part 1.1307(b)(3)(ii): (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). (B) In the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation. Calculated Result Frequency Distance EIRP Maximum tune-up ERP Exposure Limit Ratio Result (MHz) (cm) (dBm) (dBm) (mW) (mW) Pass/Fail 2402.0 20 -1.373 -2.523 0.5593711 768 0.0007257 Pass 2403.01 20 20.08 18.93 78.1627805 768 0.1017745 Pass 13.56 20 -56.228 -57.378 0.0000018 1 0.0000018 Pass Remark: Tune-up: ±1 Maximum tune-up ERP= EIRP + 1 - 2.15 Mode for Simultaneous Multi-band Transmission: Radio Access Technology Ratio 1 Ratio 2 Ratio 3 Simultaneous Ratio Limit Result Pass/Fail Bluetooth + 2.4G + RFID 0.0007257 0.1017745 0.0000018 0.102502 1 Pass

63(&,),&$7,21)25$33529$/ 'DWH  )LOH1R  5HYLVLRQ  &86720(5 60$57 (/(&7521,& ,1'8675,$/ &2/7' &86720(512 3'1 %7 $QWHQQD 3$57 1$0( %7$QWHQQD 6833/,(5 12 <-:$ 'DWH47<3&6 &86720(5$33529('%< $33529$/&+,()683(59,625 6833/,(56,*1$785( $33529$/&+(&.'(6,*1 DGG˖ $$%ORFN%1DQ[LDQ &RPPHUFLDO3OD]D0HLORQJ 5RDG/RQJKXD 1HZ'LVWULFW6KHQ]KHQ $33529$/&+(&.'(6,*1 &KHQ*XRTLDQJ;LH/L&KHQ;LQJFKHQJ <-5')$ 6SHF,WHP 12  &RQWHQWV 1XPEHURI 3DJH 3DJH&RGH  6SHF&RYHU  6SHF,WHP 'UDZLQJ'UDZLQJ  $QWHQQD6SHFLILFDWLRQ  63DUDPHWHU  3DVVLYH7HVWa  $QWHQQD3URILOH  0DWHULDO&HUWLILFDWHa  5R+6 7HVW5HSRUW 1$1$1$  DGG˖ $$%ORFN%1DQ[LDQ &RPPHUFLDO3OD]D0HLORQJ 5RDG/RQJKXD 1HZ'LVWULFW6KHQ]KHQ  

 
 
 
 
  .WQVIA3Nˆ J)OSˆDFˆ

         
  # ˆ  
 1 :ˆ   ˆ …ˆ
   ;ˆ }ˆ : 1ˆ 


  



  
 



 J)OSˆD)B4&ˆ ,Tˆ*vhvvaˆ  qˆ ˆ 5Y+Kb~€i  !
!
 CCˆ 5Y+Kb~€i{ˆ 5Y+ˆ  +ˆ KGˆˆ ˆ J)OSˆDF&ˆ ^ˆ=Z$"*ˆ 2+U5'ˆ % ˆ ˆ 6K/ˆ !
CCˆ 6K/-ˆ 6K/ˆGG[]+K ˆ ˆ +KKPHY52ˆ-_ˆ /95/>52ˆ-_ˆ 25R<7E52ˆ-_ˆ 
Uyri{bwgiˆ   ˆ /ybƒnbrˆ/beriˆ H2ˆ7{b„ H 2   /H+ˆˆ GG]]+ K ˆ ˆ XE<UR'ˆ tt 
 † EHˆ K+PUˆE+C5ˆ 25R/P;KU<HE Bcj|ocs Jc|ˆDufj|ˆ (mkx8‚zLpdxlˆ \pk?pˆ 0mkx\pxl`pˆ R/+@5'ˆ ˆ 
 ‡ M U_ P5Y<R<HE'ˆ+ˆ   ‡ 


 
       $QWHQQD6SHFLILFDWLRQ (OHFWULFDO3URSHUWLHV )UHTXHQF\*+] ,PSHGDQFH2KP1RPLQDO 96:50D[ 5HWXUQ/RVVG%0D[ 5DGLDWLRQ2PQLGLUHFWLRQDO *DLQ 3HDN G%L 3RODUL]DWLRQ/LQHDU &RQQHFWRU1RQH 3K\VLFDO3URSHUWLHV $QWHQQD0DWHULDO)3& &DEOH7\SH 2'PP/ PP 2SHUDWLQJ7HPSaÛ& DGG˖ $$%ORFN%1DQ[LDQ &RPPHUFLDO3OD]D0HLORQJ 5RDG/RQJKXD 1HZ'LVWULFW6KHQ]KHQ 6WRUDJH7HPSaÛ& &DEOH&RORU *UD\ AntennaPerformance Test Agilent AntennaPerformance Test Agilent E5071B SS Parameter Test // BT DGG˖ $$%ORFN%1DQ[LDQ &RPPHUFLDO3OD]D0HLORQJ 5RDG/RQJKXD 1HZ'LVWULFW6KHQ]KHQ AntennaPassiveTe s tAntennaPassiveTe s t DGG˖ $$%ORFN%1DQ[LDQ &RPPHUFLDO3OD]D0HLORQJ 5RDG/RQJKXD 1HZ'LVWULFW6KHQ]KHQ 3DVVLYH7HVW)RU%7 )UHT (IIL (IIL *DLQ 0+]  G% G%L          DGG˖ $$%ORFN%1DQ[LDQ &RPPHUFLDO3OD]D0HLORQJ 5RDG/RQJKXD 1HZ'LVWULFW6KHQ]KHQ   Antenna BT DGG˖ $$%ORFN%1DQ[LDQ &RPPHUFLDO3OD]D0HLORQJ 5RDG/RQJKXD 1HZ'LVWULFW6KHQ]KHQ

Test Report Date : 2023-03-14 Page 1 of 38 No. : HMD23020010 The Hong Kong Standards and Testing Centre Limited 10 Dai Wang Street, Taipo Industrial Estate, Tai Po, N.T., Hong Kong Tel: +852 2666 1888 Fax: +852 2664 4353 Email: [email protected] Website: www.stc.group This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Limited. For Conditions of Issuance of this test report, please refer to “Conditions of Issuance of Test Reports” section or Website. Applicant : PIN Genie Inc, DBA LOCKLY. 676 Transfer Rd., St. Paul, MN 55114 Supplier / Manufacturer : Smart Electronic Industrial (Dongguan) Co., Ltd Qing Long Road, Long Jian Tian Village, Huang Jiang Town, Dong Guan, Guang Dong, China Description of Sample(s) : Submitted sample(s) said to be Product: Lockly Guard Vision Brand Name: LOCKLY Model No.: PGD698D FCC ID: 2ASIVPGD698 Date Samples Received : 2023-02-24 Date Tested : 2023-02-24 to 2023-03-05 Investigation Requested : Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15 and ANSI C63.10:2013 for FCC Certification. Conclusions : The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks : Bluetooth DTS (GFSK) _______________________________ Dr.CHAN Kwok Hung, Brian Authorized Signatory Test Report Date : 2023-03-14 Page 2 of 38 No. : HMD23020010 The Hong Kong Standards and Testing Centre Limited 10 Dai Wang Street, Taipo Industrial Estate, Tai Po, N.T., Hong Kong Tel: +852 2666 1888 Fax: +852 2664 4353 Email: [email protected] Website: www.stc.group This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Limited. For Conditions of Issuance of this test report, please refer to “Conditions of Issuance of Test Reports” section or Website. CONTENT: Cover Page 1 of 38 Content Page 2 of 38 1.0 General Details 1.1 Test Laboratory Page 3 of 38 1.2 Equipment Under Test [EUT] Page 3 of 38 Description of EUT operation 1.3 Date of Order Page 3 of 38 1.4 Submitted Sample(s) Page 3 of 38 1.5 Test Duration Page 3 of 38 1.6 Country of Origin Page 3 of 38 1.7 RF Module Details Page 4 of 38 1.8 Antenna Details Page 4 of 38 1.9 Channel List Page 4 of 38 2.0 Technical Details 2.1 Investigations Requested Page 5 of 38 2.2 Test Standards and Results Summary Page 6 of 38 3.0 Test Results 3.1 Emission Page 7-32 of 38 Appendix A List of Measurement Equipment Page 33 of 38 Appendix B Photograph(s) of Product Page 34-38 of 38 Test Report Date : 2023-03-14 Page 3 of 38 No. : HMD23020010 The Hong Kong Standards and Testing Centre Limited 10 Dai Wang Street, Taipo Industrial Estate, Tai Po, N.T., Hong Kong Tel: +852 2666 1888 Fax: +852 2664 4353 Email: [email protected] Website: www.stc.group This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Limited. For Conditions of Issuance of this test report, please refer to “Conditions of Issuance of Test Reports” section or Website. 1.0 General Details 1.1 Test Laboratory The Hong Kong Standards and Testing Centre Ltd. EMC Laboratory 10 Dai Wang Street, Taipo Industrial Estate, New Territories, Hong Kong Telephone: 852 2666 1888 Fax: 852 2664 4353 1.2 Equipment Under Test [EUT] Description of Sample(s) Product: Lockly Guard Vision Manufacturer: Smart Electronic Industrial (Dongguan) Co., Ltd Qing Long Road, Long Jian Tian Village, Huang Jiang Town, Dong Guan, Guang Dong, China Brand Name: LOCKLY Model Number: PGD698D Additional Model PGD698L . Rating: 6Vd.c.(“AA” battery x4) x2 1.2.1 Description of EUT Operation The Equipment Under Test (EUT) is a Lockly Guard Vision. The transmission signal is digital modulated with channel frequency range 2402-2480MHz. The R.F. signal was modulated by IC; the type of modulation used was digital transmission Modulation. 1.3 Date of Order 2023-02-24 1.4 Submitted Sample(s): 1 Sample 1.5 Test Duration 2023-02-24 to 2023-03-05 1.6 Country of Origin China Test Report Date : 2023-03-14 Page 4 of 38 No. : HMD23020010 The Hong Kong Standards and Testing Centre Limited 10 Dai Wang Street, Taipo Industrial Estate, Tai Po, N.T., Hong Kong Tel: +852 2666 1888 Fax: +852 2664 4353 Email: [email protected] Website: www.stc.group This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Limited. For Conditions of Issuance of this test report, please refer to “Conditions of Issuance of Test Reports” section or Website. 1.7 RF Module Details Module Model Number: N/A Module FCC ID: N/A Module Transmission Type: Bluetooth 5.0 BLE Modulation: GFSK Data Rates: 1Mbps Frequency Range: 2400-2483.5MHz Carrier Frequencies: 2402MHz – 2480MHz Module Specification (specification provided by manufacturer) 1.8 Antenna Details Antenna Type: FPC antenna Antenna Gain: -0.1dBi 1.9 Channel List Channel Frequency (MHz) Channel Frequency (MHz) 0 2402 20 2442 1 2404 21 2444 2 2406 22 2446 3 2408 23 2448 4 2410 24 2450 5 2412 25 2452 6 2414 26 2454 7 2416 27 2456 8 2418 28 2458 9 2420 29 2460 10 2422 30 2462 11 2424 31 2464 12 2426 32 2466 13 2428 33 2468 14 2430 34 2470 15 2432 35 2472 16 2434 36 2474 17 2436 37 2476 18 2438 38 2478 19 2440 39 2480 Test Report Date : 2023-03-14 Page 5 of 38 No. : HMD23020010 The Hong Kong Standards and Testing Centre Limited 10 Dai Wang Street, Taipo Industrial Estate, Tai Po, N.T., Hong Kong Tel: +852 2666 1888 Fax: +852 2664 4353 Email: [email protected] Website: www.stc.group This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Limited. For Conditions of Issuance of this test report, please refer to “Conditions of Issuance of Test Reports” section or Website. 2.0 Technical Details 2…

Text truncated - open the document above for the full version.

1 Test Photo FCC ID: 2ASIVPGD698 IC: 25517-PGD698 Measurement of Radiated Emission Test Set Up Measurement of Radiated Emission Test Set Up 2 Measurement of Radiated Emission Test Set Up