2ATPH-JS-WI-2-4RF PCBAs

1 PRODUCT SPECIFICATION JS-WI-2.4 Wi-Fi IEEE 802.11 b/g/n/ ax Modules 2 JS-WI-2.4 Data Sheet The Information provided herein is subject to change without prior notice by Juganu. Please verify all details with Juganu. Any information included in this document is and shall remain, at all times, the exclusive property of Juganu Ltd. and/or its licensors. Neither the furnishing, receipt or possession of any information thereof shall constitute the granting or transferring of any right or license to copy, use or reproduce such information or any physical article or device, or any part thereof, nor to derive any benefit therefrom, in any way, unless approved otherwise in writing by Juganu Ltd. Juganu HQ 1 Yahadut Canada St., Or-Yehuda, Israel Tel.: + 972-3-5310031 [email protected] JS-WI-2.4/6 Rev 1.0 Revision History Version Date Contents of Revision Change Preparde Checked Approved V1.0 2024/7/1 New version Asaf David Yossi 3 JS-WI-2.4 Data Sheet The Information provided herein is subject to change without prior notice by Juganu. Please verify all details with Juganu. Any information included in this document is and shall remain, at all times, the exclusive property of Juganu Ltd. and/or its licensors. Neither the furnishing, receipt or possession of any information thereof shall constitute the granting or transferring of any right or license to copy, use or reproduce such information or any physical article or device, or any part thereof, nor to derive any benefit therefrom, in any way, unless approved otherwise in writing by Juganu Ltd. Juganu HQ 1 Yahadut Canada St., Or-Yehuda, Israel Tel.: + 972-3-5310031 [email protected] JS-WI-2.4/6 Rev 1.0 1. General Description 1.1 Introduction The JS-WI-2.4 is a multi-radio MCU module. The radio provides support for Wi-Fi 802.11ax in the 2.4GHz band communications. The interface of the radios is PCI express. 1.2 Description Model Name JS-WI-2.4 Product Description Support Wi-Fi/ functionalities Host Interface See below tables Operating temperature -40°C to 85°C Storage temperature -40°C to 95°C 4 JS-WI-2.4 Data Sheet The Information provided herein is subject to change without prior notice by Juganu. Please verify all details with Juganu. Any information included in this document is and shall remain, at all times, the exclusive property of Juganu Ltd. and/or its licensors. Neither the furnishing, receipt or possession of any information thereof shall constitute the granting or transferring of any right or license to copy, use or reproduce such information or any physical article or device, or any part thereof, nor to derive any benefit therefrom, in any way, unless approved otherwise in writing by Juganu Ltd. Juganu HQ 1 Yahadut Canada St., Or-Yehuda, Israel Tel.: + 972-3-5310031 [email protected] JS-WI-2.4/6 Rev 1.0 2.Block Diagram JS-WI-2.4 block diagram 5 JS-WI-2.4 Data Sheet The Information provided herein is subject to change without prior notice by Juganu. Please verify all details with Juganu. Any information included in this document is and shall remain, at all times, the exclusive property of Juganu Ltd. and/or its licensors. Neither the furnishing, receipt or possession of any information thereof shall constitute the granting or transferring of any right or license to copy, use or reproduce such information or any physical article or device, or any part thereof, nor to derive any benefit therefrom, in any way, unless approved otherwise in writing by Juganu Ltd. Juganu HQ 1 Yahadut Canada St., Or-Yehuda, Israel Tel.: + 972-3-5310031 [email protected] JS-WI-2.4/6 Rev 1.0 4.General Specification 4.1 2.4G RF Specification JS-WI-2.4 HW WLAN Standard IEEE 802.11 b/g/n/ax Wi-Fi compliant Frequency Range (Central freq@BW=20MHz) 2.412 GHz ~ 2.462GHz Channels 1-11 WIFI Features 802.11ax WIFI6, MIMO 4x4, BW: 20,40 MHz Test Items Typical Value EVM Output Power 802.11ax /20MHz MCS11: 23dBm ± 1 dB EVM ≤ -34dB Receive Sensitivity SISO (11ax,20MHz) @10% PER = -60dBm Operating Temperature -40°C to 85°C VCC 5V Host Interface WSI,IQ,GPIOs 6 JS-WI-2.4 Data Sheet The Information provided herein is subject to change without prior notice by Juganu. Please verify all details with Juganu. Any information included in this document is and shall remain, at all times, the exclusive property of Juganu Ltd. and/or its licensors. Neither the furnishing, receipt or possession of any information thereof shall constitute the granting or transferring of any right or license to copy, use or reproduce such information or any physical article or device, or any part thereof, nor to derive any benefit therefrom, in any way, unless approved otherwise in writing by Juganu Ltd. Juganu HQ 1 Yahadut Canada St., Or-Yehuda, Israel Tel.: + 972-3-5310031 [email protected] JS-WI-2.4/6 Rev 1.0 5.Module pictures JS-WI-2.4 Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 Conditions on using JUGANU Ltd. regulatory approvals: A. Customer must ensure that its product (The ” RF module”) is electrically identical to JUGANU Ltd. reference designs. Customer acknowledges that any modifications to JUGANU Ltd. reference designs may invalidate regulatory approvals in relation to the CUSTOMER Product, or may necessitate notifications to the relevant regulatory authorities. B. Customer is responsible for ensuring that antennas used with the product are of the same type, with same or lower gains as approved and providing antenna reports to JUGANU Ltd. C. Customer is responsible for regression testing to accommodate changes to JUGANU Ltd. reference designs, new antennas, and portable RF exposure safety testing/approvals. D. Appropriate labels must be affixed to the CUSTOMER Product that comply with applicable regulations in all respects. E. A user’s manual or instruction manual must be included with the customer product that contains the text as required by applicable law. Without limitation of the foregoing, an example (for illustration purposes only) of possibl…

Text truncated - open the document above for the full version.

JUGANU Ltd. Covered Equipment Certification Attestation Letter 2/11/2026 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2ATPH-JS-WI-2-4 JUGANU Ltd. (“ the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. JUGANU Ltd. (“ the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. JUGANU Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: David Davidov Title: HW Manager Company Name: JUGANU Ltd. Date: 2/11/2026

JUGANU Ltd. 1 Yahadut Canada St. Or Yehuda, 6037501 Israel Date: March 2, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ATPH-JS-WI-2-4 FRN: 0028579522 US Agent – Attestation Statement / Part 2.911(d)(7) JUGANU Ltd. certifies, that as of March 2, 2026, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2ATPH-JS-WI-2-4 JUGANU Ltd., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of JUGANU Ltd. for FCC ID: 2ATPH-JS-WI-2-4 Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: JUGANU Ltd. Designated Agent: FCC US Agent, LLC Company Representative: David Davidov Designated Agent Representative: Tim Payne Signature: Email: [email protected] Tel: +972-522790969 Signature:

JUGANU Ltd. February 11, 2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ATPH-JS-WI-2-4 Product Name: RF PCBAs Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics Long-term confidential  Block diagram Long-term confidential  Operation description Long-term confidential These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name David Davidov Company Name JUGANU Ltd. Address 1 Yahadut Canada St. Or Yehuda, 6037501 Israel Tel +972-522790969 Fax +972-3-531-0113 Email [email protected]

FCC Modular Approval Request To the FCC or FCC TCB handling this application Hereby we, Company (grantee) JUGANU Ltd. Addresss 1 Yahadut Canada St. Or Yehuda, 6037501 Israel City / ZIP / State / Country Israel request modular approval for the certification of our equipment within this application, identified by: FCC ID: 2ATPH-JS-WI-2-4 The table below contains justification for modular approval of this equipment. Requirement per DA 00-1407 Explanation from grantee 1. The modular transmitter must have its own RF shielding. Has RF shielding. 2.The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The modular have buffered modulation/data inputs. 3. The modular transmitter must have its own power supply regulation. The modular transmitter have its own power supply regulation. 4.The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. This module is equipped with four permanently fixed antennas. The antenna terminal is fixed with adhesive and cannot be removed. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. The module was tested in a stand-alone configuration, please refer to the Setup Photo for the detail 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: ??????????” or “Contains FCC ID: 2ATPH-JS-WI-2-4” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Please refer to label sample exhibit - host labeling is described in integration manual 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The required FCC rule has been fulfilled and all the instructions for the maintaining compliance have been clearly stated in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimetre wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. The MPE evaluation with 20cm distance restriction is submitted for the compliance of RF Exposure requirement. Attestation (by grantee) City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Or Yehuda, Israel 2026.03.02 David Davidov HW Manager

FCCID: 2ATPH-JS-WI-2-4 FCCID: 2ATPH-JS-WI-2-4 2.4GWIFI ANT 1&2 2.4GWIFI ANT 3&4 FCCID: 2ATPH-JS-WI-2-4 FCCID: 2ATPH-JS-WI-2-4 FCCID: 2ATPH-JS-WI-2-4 FCCID: 2ATPH-JS-WI-2-4 FCCID: 2ATPH-JS-WI-2-4 FCCID: 2ATPH-JS-WI-2-4

Label Location FCC ID: 2ATPH-JS-WI-2-4

FCCID: 2ATPH-JS-WI-2-4 FCCID: 2ATPH-JS-WI-2-4 FCCID: 2ATPH-JS-WI-2-4

FCC ID: 2ATPH-JS-WI-2-4 Prediction of MPE at a given distance 1. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) 2. Test Procedure Equation from page 18 of OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to the antenna G = numeric gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna FCC ID: 2ATPH-JS-WI-2-4 3. Result Worse case is as below: Mode Frequency (MHz) Prediction distance (cm) RF output power MPE (mW/cm 2 ) Limit (mW/cm 2 ) MPE Test Exclusion dBm mW 2.4GWIFI 2412-2462 20 24.154 260.2556 0.77648 1 Yes 2.4GWIFI Antenna Gain: 11.76dBi, 15(numeric) Meet MPE requirements, RF Exposure evaluation is not required.

Report No.: BL-SZ2471213-902 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 18 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Juganu USA Inc Address: 350 Motor Parkway,Suite 204 Hauppauge,NY 11788 USA Equipment Type: RF PCBAs Model Name: LED-SL-SOLITAIRE3-z-Dx-Fc-S Brand Name: Juganu Test Standard: IEEE Std 149-2021 Sample Arrival Date: Jul. 26, 2024 Test Date: Jul. 30, 2024 Date of Issue: Aug. 21, 2024 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Xia Long Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2471213-902 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 18 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Aug. 21, 2024 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory ..................................................................................................................... 3 1.2 Test Location ......................................................................................................................... 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ............................................................................................................ 4 2.2 Manufacturer Information ...................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) .......................................................... 4 2.4 Ancillary Equipment .............................................................................................................. 4 3 SUMMARY OF TEST RESULTS ................................................................................................. 5 3.1 Test Standards ...................................................................................................................... 5 3.2 Test Verdict ........................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................... 5 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 6 4.1 Test Condition ....................................................................................................................... 6 4.2 Test Equipment List .............................................................................................................. 6 4.3 Test Setup ............................................................................................................................. 7 4.4 Test Frequencies .................................................................................................................. 8 ANNEX A TEST RESULTS ............................................................................................................. 9 A.1 Gain and Efficiency ............................................................................................................... 9 A.2 VSWR ................................................................................................................................. 12 ANNEX B RADIATION PATTERN ................................................................................................ 13 ANNEX C TEST SETUP PHOTOS ............................................................................................... 17 ANNEX D EUT PHOTO ................................................................................................................ 17 Report No.: BL-SZ2471213-902 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 18 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2471213-902 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 18 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Juganu USA Inc Address 350 Motor Parkway,Suite 204 Hauppauge,NY 11788 USA Contact Person Michael Soganich Tel. No. +1 (404) 414-8929 Email Address [email protected] 2.2 Manufacturer Information Manufacturer Juganu USA Inc Address 350 Motor Parkway, Suite 204 Hauppauge, NY 11788 USA 2.3 General Description for Equipment under Test (EUT) EUT Name RF PCBAs Model Name Under Test LED-SL-SOLITAIRE3-z-Dx-Fc-S Antenna Type PCB Antenna Dimensions 42*42 mm 2.4 Ancillary Equipment Note: Not app…

Text truncated - open the document above for the full version.

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 4008300895 Website: http://www.a-lab.cn/certificate FCC TEST REPORT FCC ID: 2ATPH-JS-WI-2-4 On Behalf of JUGANU Ltd. RF PCBAs Model No.: JS-WI-2.4 Prepared for : JUGANU Ltd. Address : 1 Yahadut Canada St. Or Yehuda, 6037501 Israel Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China Report Number : A2403279-C01-R04 Date of Receipt : March 29, 2024 Date of Test : March 29, 2024 – January 8, 2026 Date of Report : January 8, 2026 Version Number : V0 Test Result : Pass Page 2 of 39 Report No.: A2403279-C01-R04 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results -----------------------------------------------------------------------------------5 1.1. Description of Standards and Results ---------------------------------------------------------------------------5 2. General Information ---------------------------------------------------------------------------------------------------------6 2.1. Description of Device (EUT) ---------------------------------------------------------------------------------------6 2.2. Accessories of Device (EUT) --------------------------------------------------------------------------------------7 2.3. Tested Supporting System Details --------------------------------------------------------------------------------7 2.4. Block Diagram of Test -----------------------------------------------------------------------------------------------7 2.5. Test Mode Description -----------------------------------------------------------------------------------------------8 2.6. Test Conditions --------------------------------------------------------------------------------------------------------9 2.7. Test Facility -------------------------------------------------------------------------------------------------------------9 2.8. Measurement Uncertainty ------------------------------------------------------------------------------------------9 2.9. Test Equipment List ------------------------------------------------------------------------------------------------ 11 3. Spurious Emission --------------------------------------------------------------------------------------------------------- 12 3.1. Test Limits ------------------------------------------------------------------------------------------------------------ 12 3.2. Test Procedure ------------------------------------------------------------------------------------------------------ 13 3.3. Test Setup ------------------------------------------------------------------------------------------------------------ 13 3.4. Test Results ---------------------------------------------------------------------------------------------------------- 14 4. RF Conducted Spurious Emissions ---------------------------------------------------------------------------------- 23 4.1. Block diagram of test setup -------------------------------------------------------------------------------------- 23 4.2. Limits ------------------------------------------------------------------------------------------------------------------ 23 4.3. Test procedure ------------------------------------------------------------------------------------------------------ 23 4.4. Test result ------------------------------------------------------------------------------------------------------------ 23 5. Duty Cycle -------------------------------------------------------------------------------------------------------------------- 24 5.1. Block diagram of test setup -------------------------------------------------------------------------------------- 24 5.2. Test Procedure ------------------------------------------------------------------------------------------------------ 24 5.3. Test Results ---------------------------------------------------------------------------------------------------------- 24 6. Maximum conducted output power ---------------------------------------------------------------------------------- 25 6.1. Test limits ------------------------------------------------------------------------------------------------------------- 25 6.2. Test Procedure ------------------------------------------------------------------------------------------------------ 25 6.3. Test Setup ------------------------------------------------------------------------------------------------------------ 25 6.4. Test Results ---------------------------------------------------------------------------------------------------------- 25 7. Power Spectral Density --------------------------------------------------------------------------------------------------- 27 7.1. Test limits ------------------------------------------------------------------------------------------------------------- 27 7.2. Test Procedure ------------------------------------------------------------------------------------------------------ 27 7.3. Test Setup ------------------------------------------------------------------------------------------------------------ 27 7.4. Test Results ---------------------------------------------------------------------------------------------------------- 28 8. Bandwidth -------------------------------------------------------------------------------------------------------------------- 31 8.1. Test limits ------------------------------------------------------------------------------------------------------------- 31 8.2. Test Procedure ------------------------------------------------------------------------------------------------------ 31 8.3. Test Setup ------------------------------------------------------------------------------------------------------------ 31 8.4. Test Results -------------------------…

Text truncated - open the document above for the full version.

Page 1 of 41 Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) NVNT ax20 2412 Ant1 99.47 0.02 NVNT ax20 2437 Ant1 99.82 0.01 NVNT ax20 2462 Ant1 98.56 0.06 NVNT ax40 2422 Ant1 98.66 0.06 NVNT ax40 2437 Ant1 99.26 0.03 NVNT ax40 2452 Ant1 99.78 0.01 NVNT b 2412 Ant1 98.46 0.07 NVNT b 2437 Ant1 99.74 0.01 NVNT b 2462 Ant1 98.36 0.07 NVNT g 2412 Ant1 99.53 0.02 NVNT g 2437 Ant1 99.48 0.02 NVNT g 2462 Ant1 98.44 0.07 NVNT n20 2412 Ant1 98.66 0.06 NVNT n20 2437 Ant1 99.84 0.01 NVNT n20 2462 Ant1 99.67 0.01 NVNT n40 2422 Ant1 99.80 0.01 NVNT n40 2437 Ant1 99.45 0.02 NVNT n40 2452 Ant1 99.10 0.04 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT ax20 2412 Ant1 18.42 0.5 Pass NVNT ax20 2437 Ant1 19.02 0.5 Pass NVNT ax20 2462 Ant1 19.02 0.5 Pass NVNT ax40 2422 Ant1 36.24 0.5 Pass NVNT ax40 2437 Ant1 36.3 0.5 Pass NVNT ax40 2452 Ant1 36.96 0.5 Pass NVNT b 2412 Ant1 7.08 0.5 Pass NVNT b 2437 Ant1 7.11 0.5 Pass NVNT b 2462 Ant1 7.56 0.5 Pass NVNT g 2412 Ant1 15.96 0.5 Pass NVNT g 2437 Ant1 16.32 0.5 Pass NVNT g 2462 Ant1 16.32 0.5 Pass NVNT n20 2412 Ant1 17.04 0.5 Pass NVNT n20 2437 Ant1 17.4 0.5 Pass NVNT n20 2462 Ant1 17.55 0.5 Pass NVNT n40 2422 Ant1 36.3 0.5 Pass NVNT n40 2437 Ant1 36 0.5 Pass NVNT n40 2452 Ant1 36.48 0.5 Pass -6dB Bandwidth NVNT ax20 2412MHz Ant1 Page 2 of 41 -6dB Bandwidth NVNT ax20 2437MHz Ant1 -6dB Bandwidth NVNT ax20 2462MHz Ant1 Page 3 of 41 -6dB Bandwidth NVNT ax40 2422MHz Ant1 -6dB Bandwidth NVNT ax40 2437MHz Ant1 Page 4 of 41 -6dB Bandwidth NVNT ax40 2452MHz Ant1 -6dB Bandwidth NVNT b 2412MHz Ant1 Page 5 of 41 -6dB Bandwidth NVNT b 2437MHz Ant1 -6dB Bandwidth NVNT b 2462MHz Ant1 Page 6 of 41 -6dB Bandwidth NVNT g 2412MHz Ant1 -6dB Bandwidth NVNT g 2437MHz Ant1 Page 7 of 41 -6dB Bandwidth NVNT g 2462MHz Ant1 -6dB Bandwidth NVNT n20 2412MHz Ant1 Page 8 of 41 -6dB Bandwidth NVNT n20 2437MHz Ant1 -6dB Bandwidth NVNT n20 2462MHz Ant1 Page 9 of 41 -6dB Bandwidth NVNT n40 2422MHz Ant1 -6dB Bandwidth NVNT n40 2437MHz Ant1 Page 10 of 41 -6dB Bandwidth NVNT n40 2452MHz Ant1 Band Edge Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT ax20 2412 Ant1 -51.29 -30 Pass NVNT ax20 2462 Ant1 -50.72 -30 Pass NVNT ax40 2422 Ant1 -49.85 -30 Pass NVNT ax40 2452 Ant1 -49.86 -30 Pass NVNT b 2412 Ant1 -56.33 -30 Pass Page 11 of 41 NVNT b 2462 Ant1 -55.46 -30 Pass NVNT g 2412 Ant1 -54.58 -30 Pass NVNT g 2462 Ant…

Text truncated - open the document above for the full version.